Internala order Automatically updated in Saled order

Hi,
how the internal order is populated in the Acct Assignment tab of the sales order.
I created some internal orders to test cost tracking for our MAPA-USA business. Following is a report from Development (KOB1). I created internal orders 600000000000 u2013 603000000000 and created sales orders 150-154. The piece I am missing, however, is how to get the internal number to auto populate in the Acct Assignment tab of the sales order. It currently defaults in for our sample orders in Production but not sure where/how this is configured.
Thanks and regards,
T.Harish kumar

Hi,
many thank for your response. Do you have any template file to upload with the program RFTBFF00?
If you could send to me i really appreciate.
Thanks in advance
Regards,
Teresa

Similar Messages

Exchange rate automatic update in Sale Order

Dear All,
This is regarding Exchange rate automatic update in Sale Order and requirement said below.
Process:
User will created a Export Sale order in the month of November , that time Exchange rate is 50.00, this will
get updated in Sale order Header and Item level.
But user will create billing in the month of December , at that time Exchange rate is 40.00. So in Billing
document Header level exchange rate will be 40.00 (Current rate) and Item level exchange rate will be
50.00.
Requirement:
User requirement is like this the current exchange rate 40.00 to be updated in Sale Order Header and Item
level automatically, because user using Sale order Exchange rate for Z-Report.
As of now user manually updating Exchange rate in Sale Order.
Let me know if there is any solution.
Regards
S Kumar

I dont think this is possible. You should be aware any change in subsequent document would not have any impact in the preceding document which means, whatever exchange rate flowing in billing cannot be updated in sale order. May you can update your zee table by considering the billing document exchange rate by way of exit.
thanks
G. Lakshmipathi

Automatically update Equipment Hierarchy when confirming service order

Hi Gurus,
When I confirm the service order, the old part needs to be replaced by the new part. The requirement is that this replacement is done automatically in the equipment hierarchy after confirming the service order. ie.Equipment should get automatically updated in the equipment hierarchy. How to configure this?
Best Regards,
Dhanabal

Hello,
As you confrim the labour and maerial, the Equpment hierarchy will not get replaced by the new one. You need to go for an enhancement. Cehck with your ABAP consultant with a detailed requirement.
Prase

To automatically update material availability information in service orders

u2022 Develop a utility/program for customer support to automatically update material availability information in service orders using IW32 and IW72 Tcodes.

hi answered
Edited by: raghu k on Jan 11, 2011 5:29 PM

I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8? Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

I have a MacBook 5,1 (13.3" aluminum from 2007 or 2008). Automatic updates will only let me get to OSX 10.5.8. Can I upgrade to Snow Leopard, Lion 10.6 or even 10.6.8? Also, will I have any issues with my iPhone if it's updated to iOS 7.1?

The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. You will need to be running 10.6.8 to access the App Store to order Lion or Mountain Lion. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.
You can upgrade direct from 10.6.8 to 10.8 Mountain Lion without going through 10.7 Lion with the Late 2008 model 5,1 Aluminum Unibody. The Model 5,1 will probably run 10.9 Mavricks when it comes out.
10.8 Mountain Lion is a download from the App Store, the price is $19.99.
Mountain Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
As for third party programs see this list for compatibility with 10.8 http://roaringapps.com/apps:table
Also Mountain Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Mountain Lion.
Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

ITunes, Remote.app v2: Does v2 still work in iOS7 or will I be automatically updated to version 3? (Plus v3 and iTunes issues)

Remote.app (version 2): Does it still work in iOS7 or will I be automatically updated to version 3?
That is basically the main question I've come to ask (with some side commentary in parenthesis below).
After trying out iTunes Remote App version 3, I saw that it scrambles playlists (such as Recently Purchased), which makes my playlists worthless. For example, using Remote.app, it's no longer possible to simply play the songs you bought over the last week at the iTunes Store using the Recenlhy Purchased Playlist. Since I buy a lot of music through the iTunes Store, I naturally want to listen to what I just paid for, just as I could using Remote.app version 2.
But it's not just the Recenly Purchased playlist, it's all my playlists. Through the last decade, day in and day out, I've carefully orgnized hundreds of playlists that I've very crafted, song by song like old mix tape casettes.
They payoff for this work has been enormous. Since starting with mp2 in 1995, then mp3 and continuing through to the thousands of dollars I've spent purchasing songs through the iTunes Store and tens of thousands on iPods, iPhones, iPads, and computers—I've been able to make music match whatever mood or music was juuust right for the moment, making for great moments and memories with friends and families. For some artists, I always want to hear their latest songs first or I want to to hear top rates songs first. Other lists are about creating a particular mood for just about any occasion. I can even shift the mood in the room with the right music list. It's really been fantastic the memories and moments I've been able to set the tone with the right song, and most of this has been not the song itself, but the flow of music I've created by orgnizing music lists. That's a lot of work I've invested. So the order of the songs matters a lot to me, especially the very first song that starts that list. That's the song I want to hear first, not somewhere in the middle.
As of Remote.app version 3, these carefully crafted songlists are scrambled, making the App worthless. When I first noticed this I couldn't believe it, must be a bug. Nope, no bug, by design I found out. It's like when Lucy pulls the football away. It's mean spirited to take back features you've sold and promoted and people have grown to rely on in the workflow of their lives. So I downgraded back to Remote.app version 2.
((Actually, they're not really technically scrambled, they're actually presented in alphabertical order, which I think is really the same thing to me. Think about it: listening to an artists work alphabetically by title is really the most random and completely scrambled way to listen to their music. Or if you don't want to listen to them alphabetically, you can have them shuffled. Those are now the only two choices. Either way, the lists are jumbled, and like iTunes 11, several of the most powerful features have been taken away. In this case the exact thing that's missing is that the iTunes Remote no longer reflects the sort order of iTunes playlists.
I don't know if this is a quiet, update-by-update shift away from our playlists and towards iTunes Radio or not, but I would think so. Why else would you make it less powerful. To quote Merlin Mann Apple tends to "fire a warning shot" feature wise before taking something away. The Finder has gotten less and less powerful in finding files and folders by their name and size through the last decade.
I'm now noticing the same thing with iTunes, it's becoming more difficult to find the currently playing song. In iTunes 10, Go to Current Song would open the folder containing the list of the currently playing song, highlight and move that list to the top of the left column and then highlight that song. In iTunes 11, Go to Current Song will only highlight the folder that contains that song and nothing more. At that point you're on your own to hunt town the currently playing song. This feature has been broken—on purpose I suspect.))
SO—I don't want to be forced into Remote.app version 3 and have my playlists scrambled on my iPhone and iPad. Is there anyone who knows the answer from first hand experience?
If customer loyalty is as important to Apple as it should be taking away features in iTunes and Remote app will only drive old customers away.
Thanks!!
David

I like that I would be able to maintain my iPhoto library data for Faces and Places in Aperture, but am concerned that when the iPhoto library is "upgraded" for Aperture, and I decide I don't really need that program, the upgraded library won't work with iPhoto anymore.
The iPhoto library isn't changed in any way by Aperture. Aperture will import the Library and you can choose to copy the files to the Aperture Library or reference them within iPhoto. As long as you don't delete files from the iPhoto Library via Aperture (which you could do if you choose to Reference) there is no impact on iPhoto
Will I still be able to use iPhoto to access and organize my library, or will it be forever converted for use with Aperture?
They are completely different libraries.
Recently, iPhoto bugs make Events show up multiple times in iTunes when syncing for iPhone and iPad.
Fixed in the 9.1.3 update.
Will I find a better user experience with Aperture, or does it also use the single file library and suffer the same struggles iPhoto users have been seeing lately?
Like iphoto, Aperture can use the "single file library" or it can use a Referenced Library (just like iphoto can). Note that using a Referenced Library offers not a whit more in terms of features or capabilities. It's file storage plain and simple. Nothing more.
No you won't see the "same struggles iPhoto users have been seeing..." because Aperture is an entirely different allication.
But you my see Aperture or Lightroom struggles
Regards
TD

IW41: automatic update of activity type when changing the work center?

Hello colleagues,
when doing a time confirmation with IW41, we have following problem:
In the PM order the operations are assigned to a neutral executing work center, as it not known which individual technician is completing the operation later on.
Now when the individual technician is entering the time confirmation with IW41, system is proposing the work center indicated in the operation from the PM order, then technician is overwriting the work center proposal with his own individual work center ID (and pressing Enter), but the activity type is not getting updated automatically. So the technician must jump to field "activity type" and choose the correct activity type.
Is there any solution (hopefully with user exits!) to have the field "activity type" automatically updated with the one indicated in the work center, which was entered manually?
Thanks for your ideas!
Regards,
Patrick

Hi Maheswaran,
yes, as usual all PM work centers have only 1 activity type assigned in the costing tab.
We also checked the settings of the activity type (KL03), but we just found one difference: the price indicator was set on 3 "Determined manually" - we've changed to 1 "Plan price, automatically based on activity" (..same setting as for the act. type of the work center with working update of act.type).
We tested already all possible constellations and scenarios, but we have not found any good reason for the behaviour.
Thanks for your efforts so far!
Patrick

Automatic update net price in PO creation

Dear expert,
I just found an issue while creating a new PO.
I fill in all data needed, included net price. And when I press "enter", surprisingly the system automatically update the Net price with last PO price. and I need to manually change again the net price with current price.
Anyone can describe why system automatically update the PO price? is there any setting to inactivate it??
thanks much,
nasikhin

Hi,
Please read the note:
456691   FAQ: Price determination in purchasing
3. How does price determination determine the conditions via a 'Last
    purchase order'?
Answer:
If the info record does not contain any valid conditions, but a "last
document" exists for the info record, the system copies all of the
conditions from this document if the following prerequisites are met:
    o The net price must be zero (EKPO-NETPR = 0.00) after the system
       has carried out price determination.
                                                                 Page 5
       However, the net price is not zero after price determination has
       taken place and the system does not copy the conditions from the
       last PO if master conditions that are included in the net price
       calculation are maintained at, for example, vendor level or
       material group level.
    o The last document is not a request for quotation.
    o The info record has not been deleted.
    o The vendor and the material in the info record are identical to
       the vendor and the material in the last document.
    o The calculation schema of the last document is the same as the
       current schema that has been determined.
The system simply executes a copy function to transfer the conditions
from the last document. The system does not check for requirements for
the calculation schema.
The system does not copy the condition records of the subsequent
settlement (the condition type has the condition class "C"); instead,
they are always determined again to ensure that the condition records
are consistent with the field contents (also see Note 486757).
If you generally do not want the system to transfer the conditions from
the last PO, you can use the user parameter EVO to deactivate this (also
see Note 675523).
So you can use the parameter EVO.
Best Regards,
Arminda Jack

Automatical update of PO quantity when changed in SO

We have a following issue
for our regular business we have a third party process for trading
goods. So we are using on customer sales order stock. In our system
following is possible: We create a sales order and after using of
Purchase requisition we create a purchase order. So now when we change
the quantity in SO and save the SO, this change is automatically done
in the PO as well.
So this really works without canceling the PO first,
changing the SO and creating a PO again.
So now we have implemented a new product in a different sales area with the same process and
with same material type HAWA but this automatical update of quantity is
not working.
What needs to be done to enable this function for our new
product as well?

My colleague was here when the system was implemented. He is not aware of any development here that enables this function. I have been looking for user exits and none are active for this. I have been told that this works only for customer sales order stock but I was not given any reason why.
It seems logical, that in some development a new sales area needs to be included as Bijay said. Anyway we still think this function works without additional development.
@Raghavendra we are using the SAP standard scenario. SO - PR - PO. PO is manually created out of PR in both cases.

How do you create a calculation that automatically updates changes?

Hi all,
I am trying to create a calculation using subtraction. This is how it is set out:
KM
-KG
=Field1
-Field2
=GM (fluid)
Under the calculate tab for Field 1, I have written in the Simplified field notation:
KM-KG
And under the calculate tab for =GM (fluid), I have written in the Simplified field notation:
Field1-Field2
And this all works perfectly providing I don't change any of the totals in the KM or KG or Field2 fields.
If I make changes in those fields they don't automatically update.
How do I make them automatically update?
Any assistance would be hugely appreciated.
Many thanks.
Bridie

To set the field calculation order, first go into form editing mode (Tools > Forms > Edit) and then: Tasks > Other Tasks > Edit Fields > Set Field Calculation Order
Order the fields in the list to whatever makes sense for your form. Be sure to do this again once you have the form working like you want to make sure it's still set up correctly.

Automatic update in creating a photo album

Hello,
I have created several photo albums for product photos. I was
wondering: if I need to add/delete photos do I need to create a new
album with the edited folder or is there a way to automatically
update? Thanks in advance for help.

Using the built in photo album creator in DW you will need to
rebuild the
entire album or manually add and remove images and pages.
This involves deleting removed pages, images and thumbnails,
then manually
re setting the links between pages and re-arranging the
thumbnails.
If you used the image counter and you're really anal, you'll
need to edit
that one page at a time as well.
If you plan to do a lot of editing of images, you might want
to consider a
list type photo album like ShowPick from PVII
http://www.projectseven.com/extensions/listing.htm
or if you really plan to
do a lot of gallery work, buckle down and buy Image Gallery
Magic from them
(same address as above) It allows unlimited editing of
content, rearranging
order, adding, removing images, does all of your web
optimization and is a
pleasure to use
No, I don't work for PVII but my life has been easier since I
bought their
product.
"JennMC12" <[email protected]> wrote in
message
news:eki4tn$9hp$[email protected]..
> Hello,
> I have created several photo albums for product photos.
I was wondering:
> if I
> need to add/delete photos do I need to create a new
album with the edited
> folder or is there a way to automatically update? Thanks
in advance for
> help.
>

Automatic Update of Quantity without BF ?

When I ran a PP cycle, after confirming the production order ( C015), I was expecting to do manual Goods Reciept(MIGO/MB1C), as I didnot maintain backflushing ( neither in material master, Rtg, w/c)
Now, Is there are anyother way without maintaining backflushing, automatic update of the
quantity without doing manual Goods Reciept

Hi,
Backflush means automatic goods issue when the quantity is fully confirmed. Auto goods receipt will not happen with backflush setting.
For automatic goods receipt settings we can maintain in two areas.
1. Operation control key in routing., This will work for only one operation. If you have more than one opn in routing for the last opn set this control key. So After confirming final opn goods receipt automatically will happen.
2. Production Scheduling profile : OPKP
Indicate auto goods receipt.
You can not expect which one is higher priority from the above.
If you don't want auto GR, remove from both setting.
If you want make setting in atleast one from the above.
In Production order you can maintain backflush. Production order is the highest priority than material master, workcenter & routing.
Regards,
Dharma

Internet/browser/automatic updates help please

Starting yesterday, most websites won't load in Safari, Chrome, or Firefox. Facebook works, youtube works, I can do a search on google and see results. When I click any external link it doesn't work, and typing most urls doesn't work either. However, I found that by using Miro, I can type the url or copy/paste a link and it works fine! (E-mail is also unaffected)
I only noticed the problem yesterday when starting up my computer and it installed automatic updates for: safari, iTunes, keynote, and killerkeys. I haven't been able to uninstall the updates to see if that would fix it,
I don't know enough about miro or the browsers to have a clue as to why something would work there and not other places.. any clues?
I'm on a work computer now, but any help is greatly appreciated!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Does Sap automatically updates customer credit limit from Financial Doc?

Hi Everyone
Does the Sap automatically updates the customer credit limit from the Financial document(Letter of credit) assigned to particular sales order.
I actually want to know that how can i configure the control at delivery order if i assigned the financial document at sales order.Does the system automatically creates or updates the credit limit of that customer to control over delivery order.
If yes then how and i only want to handle credit management in the case financial document(letter of credit).
Regards;Vijay Kumar

Hi,
Hi,
yes it does.
Note some important points
Inautomatic credit control field "No Check field", you can enter the number of a requirement with which you can control when credit checks are not carried out. You can deactivate some or all checks. This allows fine tuning on an individual basis for defining credit-relevant transactions and when credit checks do not need to be carried out.
A check should be made to see whether the payment guarantee form has changed (letter of credit, payment card). If the payment guarantee form has not changed and if the old net value does not exceed the new net value, then no credit check is carried out.
refer these book also
McGraw.Hill.Implementing.SAP.ERP.Sales.and.Distribution
TSSD40_3
GTS100
also check wiki also
Thanks
Chidambaram

How to automatically update Smart LINKED Object

Hi.
This is my first post here, I'm French, so excuse any English mistake i may do.
I'm not an artist / designer / ..., still new about using image software editing like photoshop.
So i downloaded Photoshop CC to try it because i wanted to do something on my spare time.
I want to render digitaly a card collection based on a online Collectible Card Game (Duel of champions if you wanna know).
For this I downloaded their card art from their site.
Then i want to add several effect / filter to render them nicely.
So i read and watch many tutorial in this purpose.
I ended with a good result for 1 card.
Here is an example :
Hi.
This is my first post here, I'm French, so excuse any English mistake i may do.
I'm not an artist / designer / ..., still new about using image software editing like photoshop.
So i downloaded Photoshop CC to try it because i wanted to do something on my spare time.
I want to render digitaly a card collection based on a online Collectible Card Game (Duel of champions if you wanna know).
For this I downloaded their card art from their site.
Then i want to add several effect / filter to render them nicely.
So i read and watch many tutorial in this purpose.
I ended with a good result for 1 card.
Here is an example :
So what i did :
I get a source card art image, adding its red border, embossed it to get relief, adding a gloss effect in 3 different layers (the card art, the border and the gloss effect). Than i duplicate all this layers, swap them vertically and moved down to get a reflection.
I added a gradient to this new group of layers to have a nice fading effect to the reflection.
As I do not want to redo all the process again and again if I change main the source card Art, I want the reflexion to automatically update.
This was done using Smart object, both main source card Art and the (vertically swapped) reflexion card art using the same object storing my different main source card art.
So when i change in this object the main source card art used, it automatically change both the rendered card and its corresponding reflexion.
And then i Added a displacement filter to simulate a water reflection.
And the first problem (solved by now) occurred :
If i want to apply a filter to the group of layers corresponding to the rendered reflexion card, Photoshop have to convert and merged the whole group of layers into another new smart object and then apply a smart filter onto it. That worked but i lost the auto updating of the reflexion as the previous conversion have made Photoshop create in fact a whole new duplicated object storing a my different main source art.
So i partially resolved This by using Smart LINKED object instead of Smart object. I say partially because it is not really fully automated anymore.
Now if I change the main Source card Art to render a new one, I have to "manually" save file / update smart object to get the reflection updated.
I kinda accelerate this using a action performing a batch of saves to get a "save all" options (that clearly miss in photoshop). But for this i still have to open all my smarted linked object in order to apply the "Save All" batch.
But know I want to generalize the process to cards left, and render my whole card collection.
So i created a template based on what i've done so far using in this template Smart LINKED Object for the Main source card art and the reflected one. By the Way I exported the Reflection group in a PSD file, and refered to it as another Smart LINKED Object in my template. Doing so i'm sure Photoshop no more use a temporary PSB object correspond to the converted / merged reflexion Smart Object (remember : created in order to apply a smart Filter on it).
So what Happen now ?
I create a new testing psd file in witch i embed several new smart objects each one is an occurence to my template. Here i have to used smart Object and NOT smart LINKED Object because if so i'll always end up with the same rendered card several times. I have to get Phososhop create it own temporary duplicated object so a modification to one don't affect all the others after "Save All" batch on the corresponding working card.
So with what I have now, if I want to change 1 of the rendered card, i go its corresponding (duplicated) template object and from there i access again my LINKED object storing all my main source card Art.
I change to what source card art I want, and I have to open the reflection smart LINKED Object too in order to apply the "SAve All" batch.
Here is the "fun" (issue) thing : I have to apply the batch 3 time in a row to have the rendered card changed in my main testing psd file. I suppose saving 3 time time propagated the change along the Smart LINKED Object chain.
AND I have to make sure ONLY the corresponding smart (LINKED) Object file are opened before. If another file from a different rendered card is opened too the change will also be propagated to it and so having a duplicated rendered card. (I only want each card rendered once, but using the same template to avoid repetitive work).
So I explained in detail, but maybe not clearly, my situation and the step i went through.
TLDR
To summarize : I have a collections of Card art (jpeg).
I created a Template applying effect to render 1 card.
I created another template appliying same effect to render 1 REFLECTED card.
In both i use the same Smart LINKED Object that Store my collection on Card Art.
I make another Smart LINKED Object in the first template that reference the second one.
So with my first template I can update the rendered card and its rendered reflexion after changing the main source card art in the subsequent smart LINKED Object that store my whole cards art. I have to had all corresponding Smart LINKED Object file OPENED and save them all to have th updated result.
So not really automatic.
Then I want to render my whole card collection with effect and reflexion.
I create in my project a duplicate of my first template for each card to be rendered.
Then I have to open ONLY all subsequent corresponding Smart LINKED(or not) Object file of current working rendered card and change the main source card art, save all the file (several time to propagate change) to properlly update the current rendered card.
I have to do this for EACH of my duplicated template in order to render EACH of my cards.
Definitively not automatic process, and prone to errors.
Do you know a way to fully automatically render my card collection ? The only thing I want to do is chose one time the main source card art for each rendered card.
Finally another way to explain this issue and maybe get an answer is to instead explain simply what I want to do :
I have a collection of (jpeg) card art from an online card game.
I want to render them all with effect (gloss, emboss border, faded and water filtered reflection).
I want to do this automatically.
The only thing i manually want to do is chose the card art to be rendered for each of the card i want to render in my collection.
Here is an image of what i want based on what i've, not automatically, done so far :
Thanks for any help from photophop professional here.

Hi,
The delta load does not work for product categories but only products.So to bring in the new product categories into SRM you will need to start the load of the object DNL_CUST_PROD1 again.
The CRM middleware allows the following two methods for replication.
-Initial loads:
Launched manually (R3AS), the objects (customizing or business) are replicated between SRM and R/3, according to the filters you've put on the object (R3AC1 for Business objects like MATERIAL, R3AC3 for customizing objects like DNL_CUST_PROD0 and 1).
-Delta loads:
This option is only possible for Business objects, which is the case of MATERIAL.
With this option a daemon is launched between the 2 servers. Every modification made on an object on SRM or R/3 is transfered as soon as this object is contained in the filter retrictions (creation and/or modification). this is done through transaction R3AC4.
Also refer the foll thread:
Material group from R/3 to COMM_CATEGORY (SRM)
Related notes : OSS notes 872819 and 720819.
BR,
Disha.
DO reward points for helpful answers.

Internala order Automatically updated in Saled order

Similar Messages

Maybe you are looking for