To automatically update material availability information in service orders

u2022     Develop a utility/program for customer support to automatically update material availability information in service orders using IW32 and IW72 Tcodes.

hi answered
Edited by: raghu k on Jan 11, 2011 5:29 PM

Similar Messages

  • Automatically update Equipment Hierarchy when confirming service order

    Hi Gurus,
    When I confirm the service order, the old part needs to be replaced by the new part. The requirement is that this replacement is done automatically in the equipment hierarchy after confirming the service order. ie.Equipment should get automatically updated in the equipment hierarchy. How to configure this?
    Best Regards,
    Dhanabal

    Hello,
    As you confrim the labour and maerial, the Equpment hierarchy will not get replaced by the new one. You need to go for an enhancement. Cehck with your ABAP consultant with a detailed requirement.
    Prase

  • Update Material Availability Date for Sales Order having a Delivery

    Dear Gurus,
    We have a bit out of the way scenario. There is a o/b delivery already added to a shipment. And then we receive a IDOC from external MES System (i.e. Production) with new material availability date. This new material availability date is updated on Sales Order. In short the order is delayed.
    Current Solution:
    In this case the user has to remove the delivery from the shipment manually. then the IDOC deletes the  delivery and the updates the sales order with new date followed by creation of new delivery.
    The business expects to updated the Sales Order material availability date without changing Shipment / delivery. Any solution?
    Current solution has to be changed as for Shipment purpose changes are made to delivery which are lost when the delivery is deleted.
    Edited by: abhishek singh on Feb 3, 2012 10:21 AM

    hi
    in this case you have to adopt the business process change.
    you have to update the EDI first and then you create delivery.

  • Availability check in service order quotation in SAP CRM

    Hello Experts,
    I am trying to establish an availability check for service order quotations in CRM
    Could somebody please guide me through the steps to solve this problem.
    Thanks in advance,
    Itisha

    Hello
    For quotations, only an availability information is triggered and that shows only confirmation when creating but not after
    save. You can find the logic in our standard function module CRM_CONFIRM_DEL_T_SCHEDLIN_EC
    You can also find information in [ online documentation|http://help.sap.com/saphelp_crm70/helpdata/en/45/b67bba228747f5e10000000a114a6b/frameset.htm]
    Regards
    Joaquin

  • Material BOM explosion in Service Order components

    Hi experts,
    I created a Material BOM with transaction code CS01.
    Then I try to add this BOM in the component of a service order.
    What I expected is the BOM to be exploded in the service order. But this behaviour doesn't occur.
    Do you know what I can do to trigger a Material BOM explosion at service order level.
    By the way, the BOM is not exploded after the service order (in the reservation or in MIGO).
    Thank you for your help.

    Hi Özgen,
    Thank you for help.
    Special Procurement 50 didn't exist in my system.
    I created it in SPRO for the plant with the Procurement Type F (External Procurement) and the flag Phantom Item checked..
    Then I created
    - Material A (MM01)
    - Material BOM A (CS01) with:
    -- item 1 Material B (which has Spec Proc Type 50 in MM02-MRP2)
    -- item 2 Material C (which has Spec Proc Type 50 in MM02-MRP2)
    After that I created a Service Order (IW31)
    I put Material A in the Component tab with quantity 1.
    The BOM remains unexploded.
    Did I miss something?

  • Material availability  check for production order

    Hello,
    Is there any functional module to check the material availability of production order. So that it can be used in developments.
    Regards,
    Ganesh

    Hi,
    Following are the available Function Modules for avaibility checks in Production orders,
    BAPI_PRODORD_CHECK_MAT_AVAIL -  BAPI: Execute Material Availability Check for Production Orders
    And for Process Orders,
    BAPI_PROCORD_CHECK_MAT_AVAIL - BAPI: Execute Material Availability Check for Process Orders
    Regards,
    Dhaval

  • Update Material Availability dates during order creation

    Hi,
    We have a requirement to update the material availability in the schedule lines of the order when the order is being created.
    We want the update to happen after the sales order is in the Data base. We tried calling a Function module in Update task. The function module is written in the EXIT_SAVE_DOCUMENT form of sales order user exit.
    The FM is getting called on the commit work , but not updating the sales order. We are getting an error " Material availability date should be less than load date". On debugging we noted that the SD_SALES_SCHEDULE_MAINTAIN is called with a load date of 00/00/0000 since the sales order is not in DB.
    Is there a way to call the FM after the sales order is in the database.
    Regards,
    Prabaharan G

    Worked using the enhancement framework development

  • Sold to Party information in Service order cleared automatically

    Hi,
    I need a clarification.In my case Service Order getting generated from Sales Order.
    Before saving the sales order,in the generated Service order(under schedule lines), Iam seeing the Sold-to-Party is populated automatically.
    After saving the order,when I open the Service order, Sold-To -Party field is blank.
    Why system is clearing the Sold-To-Party infor in Service order upon saving of sales order.pl suggest me.
    Regards
    SB

    Hi Pete,
    No.If I enter the STP in change mode of Service Order,its accepting without any issues.
    One more information is some times in Sales Order, Service Order will not get generated due to credit limit failure.In VKM3 , if I process the same  sales Order,then Service Order gets generated and in this case STP information is there.
    Means,
    If the service order gets generated from Sales Order,STP info is not there in SO even though its appearing before saving of Sales order.
    If the Service Order gets generated outside the sales orders(in VKM3),STP information is there.
    I have checked with my Technical guys....No exits in place.....any settings in Sales Order-Service Link is there for this behaviour.
    Regards
    SB

  • Material Availability Check in Process Order Issue

    Guys, I need some help in understanding the folowing issue:
    I have a FG and 2 components.I created a process order and tried to release the order. Automatic availability check is done and a dailog box appeared to list out the missing parts. Missing parts list shows both the components. But one of the componet has unrestricted stock to use in the storage location. why did the availabity check show missing part for that component?
    I checked pp checking rule and it says for business rule 2 "no check" is unchecked. so that means checking is done. and this pp checking rule is assigned in OPJJ and also assigne dto the material master of the component.
    please let me know if you need more information. Thx

    Dear you are absolutely correct if you uncheck No check box in material availability in Order control OPJK  per plant and order type that no automatic material availability check is to be executed for the specified business transaction (order creation or order release).
    But further please note that the option of calling up a material availibility check manually and also of executing a collective availability check is not affected by setting this indicator. This indicator is also ignored if you work with Assembly orders and you have defined in Customizing for Sales Orders that a material availability check is to be carried out.
    Cheers
    kK

  • Material Availability Date of Sales Order

    An issue 1  :
    There is material which is GATP relevant and stock is available in APO and R3.When GATP check is performed MAD Date is shown as Current Day +1,where as it should be Current Day only.And this issue happens on Friday only i.e GATP returns Current day as MAD day on other than friday.
    An  issue 2 :
    There are Sales Order already created for a material sat mat1 with availability check code  "ZF" in MRP3 tab of material master.The MAD has already been calculated with existing settings through GATP functionality.
    What is required that change the availability check code in MRP3 tab of material master to "ZB" and re-check the availability of the already created sales orders in R3.
    But what we understand since Sales Order already created for Availability check code "ZF",new changed "ZB" will not impact the ATP check.
    An issue 3 ;
    What are the settings influence the calulations of MAD in APO and R3.
    Is there any way this can be achieved.
    Manish

    Manish,
    First, you will always get better responses in this forum if you enter one issue per post.  Many people are unwilling to respond to a multi-question posting.
    Issue 1.  There are dozens of factors that can contribute to a Material Availability date in APO. Are you using RBA?  Allocation? ATP against a forecast? CTP?  Transportation Scheduling? etc etc etc......
    The most likely reason is that you have an issue with with valid workdays in one of the calendars that affect your GATP check.  
    Issue 2 - This is mostly an R/3 issue.  The practice you call out (change the MM ATP checking group and re-atp the order) is only supported by SAP in a limited way.  The easiest way I have found to do this is to open the sales order, remove the plant from the item, and then save the order.  Make your changes to the MM.  Wait until the MM changes get to SCM.  Now, re-open the sales order, and re-enter the plant.  If you are lucky, the sales order will re-read the updated MM data, and re-atp the order in SCM using the updated SCM data.  Now, re-save the sales order.
    By the way, don't think that you can now blithely change the ATP checking group in R/3 back to the old value.  You will face additional problems in delivering and shipping the order later. The process I described should only be used to correct an existing MM error.
    Also, be aware that any ATP checking group beginning with a 'Z' has been customized for your company.  You should contact the local SD expert to see what changes your company had made for these ZD and ZB groups.
    Issue 3 - GATP is a large module in SCM.  There are many types of checks.  Each one has it's own items that can affect MAD (generation of MAD is the prime output of GATP).  I couldn't possibly cover them all in a single posting.  The standard SAP overview class for GATP is 3 days, and this class doesn't go into much detail.  I strongly recommend that you consult with your local GATP functional expert, or consider hiring an expert GATP consultant if you wish to proceed with your development of APO GATP.
    Good luck!
    Regards,
    DB49.

  • Material Availability check during work order creation and Release

    Hello All,
    We are checking material availability at creation as well as release
    Say we have Material XYZ=100 in stock MMBE
    Now XYZ =100 is say at normal storage location =75
    and scrap storage location=05 and serviceable =20
    Currently when availability check is performed it checks for 95 (It excludes scrap storage location 05 )
    but we want  Availability check to be only for normal stock =75 and not for Serviceable and Scrap location
    how to do this in configuration or via exits
    Since if the material is under Scrap location it is not counting in Availability check at work order creation this logic is working fine but I do know from where this control is put that when the material is in the stock of scrap it is not counting in Availability check for work orders.Same thing I want to extend it to Serviceable stock .
    Why not it is consider it for Scrap storage location , what is config or any MM enhancement
    So that when Availability check run it will not consider Materials at SCRAP as well as SERVISABLE storage location also.
    Please have your views on this
    Regards
    pratap

    Hello
    There are two option for your requiement
    1. Changing the status of the servisable storage location stock to restricted use stock . You can include or exclude this stock status material in OPJJ. This solution is not storage location dependent. It is stock status dependent.
    2. Please refer the enhancement for the storage location determination. I am not sure about this funtionality:
    For production orders the following enhancement is available:
    PPCO0005 enhancement for storage loc. determination/backflushing
    You can use this enhancement to change the storage location and the indicator 'backflushing' in the reservation.
    The enhancement PPCO0005 contains the following enhancement components:
    Function exit
    EXIT_SAPLCOSD_001 storage location determination/backflushing
    You can find the description in modification text of the function exit.
    You can find an example of the user exit in the function group XC01 in the include LXCO1F05.
    warm regards
    Ramakrishna

  • Aditional Information in Service Orders

    Hi experts
    I have the following situation. I have to add aditional information to the service orders, and i am using a field key in "Enhancemen", but i need to restrict the fields values.
    ¿Does anybody know how i can use some kind of matchcode in those fields?
    thanks in advance

    hi answered
    Edited by: raghu k on Jan 11, 2011 5:29 PM

  • User-exit to update material component in a production order with a batch

    I am looking for a solution to update a production order material component with a batch number what is stored in the configuration of a sales order. The production order is defined for salesorder related production. How can I update the field RESBD-CHARG in the production order.
    Tried already the exits PPCO0001, PPCO0008, PPCO0021. Also looked for a solutions with batch search stratgegies, but I have no idea kind of possiblities I have here. Other problem is that we are stil on release 4.7.
    Hopefully some can help me with a solution.
    Regards,
    Peter Geurts

    Dear
    You have to update the batch in a production order component via RFC Call of BAPI_ALM_ORDER_MAINTAIN.You should also pass operation number to T_COMPONENT and T_COMPONENT_UP
    T_COMPONENT-ACTIVITY = Operation Number
    You need to pass the following tables
    IT_METHODS should have 2 values
    Refnum - '000002'
    Objecttype - 'COMPONENT'
    Method - 'CHANGE'
    Objectkey - 300054 (Prefix the zero's)
    Append IT_METHODS
    Method - 'SAVE'
    Append IT_METHODS
    T_COMPONENT should have the following values
    RESERV_NO - Reservation number ( you can see in production order)
    RES_ITEM - Reservation item ( you can see in production order)
    BATCH - populate the required value
    APPEND T_COMPONENT
    T_COMPONENT_UP should have the following values
    BATCH - 'X'
    APPEND T_COMPONENT_UP
    Or else look at BAPI 'BAPI_MATERIAL_GETBATCHES'. This might help you.....
    CALL FUNCTION 'BAPI_MATERIAL_GETBATCHES'
    EXPORTING
    material = MATERIAL
    BATCHNUMBER =
    plant = PLANT
    expirydatefrom = DATE
    Hope this will be useful
    Regards
    JH
    Edited by: Jiaul Haque on Sep 12, 2010 11:14 PM

  • Material Availability Check Web service required

    Hi,
    I am after a standard web service that accepts a material code and returns a plant/location/s and availability/quantity.
    ex:
    input:    code:CMA0001
    output: plant: E100   QTY 3
                plant: E200   QTY 1
    Any help much appreciated
    Darren

    Hi Brad,
    Thanks for your fast reply.
    Unfortunately I am new to SAP and web services. I have used some webservices to create Purchase requisitions, get material list and detail, etc succefully, so I am into a bit of a learning curve
    Can you ellaborate a bit more. If you know at least which BAPI service I need to use will be of great help.
    Kind regards,
    Darren

  • Update Material availability after goods receipt

    Hello Experts,
    Configured the system to send an email to MRP when a missing part in a Production order Received.
    Now the problem is, How to remove the Missing parts flag from the Pick list ( or How to update the Material availbilty at Goods receipt? ).
    Thanks for your help in advance.
    Govind.

    Mario,
    Thanks for your response.
    We have the ATP mass processing background job scheduled. But thats is running by period value. I am looking for something which updates after the GR Posted. ( Event based ) and should run only for the part no or Oder received.
    Do you have any suggesstions?
    Thanks
    Govnd.

Maybe you are looking for