Internetconection for Windows7 under Boot Camp

HI,
I have a Macbook Air 13 Running Lion and Windows7 under Boot Camp.
The internetconnection via WiFi is ok on both and via USB 2.0 Ethernet adapter to TP ok on Lion.
But the ethernetadapter does not work with windows.
I have installed the newest Brodacomdriver in Windows.
What is wrong???
Janne.

Mine does the same to.

Similar Messages

  • Dual monitor not working under Boot Camp on Mac Pro ATI HD 2600 XT

    Recently got a brand new Mac Pro with ATI Radeon HD 2600 XT graphics card.
    On the Mac side (Leopard), everything works perfectly: my second monitor (a plasma screen connected with HDMI to the second DVI of the ATI card via HDMI/DVI adapter) is fully recognized and it works as an extended desktop or in Mirroring mode.
    Under Boot Camp (Windows XP Pro) however, NOTHING: the second monitor always appears in the display properties, but it is grayed out (inactive), and when I try to activate it, it switches back to being grayed out immediately and nothing gets displayed on it.
    After reading all the posts I can find on the topic, I tried the following (in pretty much every possible combination - Thank god for WinClone that allows me to restore the Boot Camp basic install image without having to reinstall Windows from scratch every time):
    a) Bootcamp 2.0 (installed by default by Bootcamp assistant)
    b) Update to Bootcamp 2.1
    1) Windows XP Pro SP2c vanilla install (from my Windows XP pro install disk)
    2) Update to Windows XP SP3 (I tried with and without BC 2.1: both worked -> BC 2.1 didn't seem to be required for SP3 - maybe because this is a mac pro and not a MB or MBP)
    i) ATI drivers installed by default by Boot Camp assistant (BC 2.0) or by BC 2.1
    ii) Latest ATI drivers found on ATI web site specifically under Boot Camp / Mac Pro.
    Note: Interestingly, the catalyst installer worked ok (provided .NET framework 2.0 is installed though), but it seems that the Radeon BootCamp/Mac Pro driver set itself from ATI's web site does NOT include a driver for the HD 2600 XT - so when I install this driver set, it tells me that no compatible hardware was found...
    iii) Latest ATI drivers found under Windows XP (these did include one driver specifically for the Radeon HD 2600 XT)
    NOTHING seems to work. I read posts (most of the from late last year) about ATI Catalyst utility showing a 3rd monitor at some point, but I never got any 3rd monitor showing in any of my many many trials with Catalyst. I have yet to get a single image appear on my plasma under Bootcamp Windows. I don't believe its the hardware because everything works great on the max OS X side.
    I am actually considering switching to an NVidia 8800 GT just to get the dual screen to work under BootCamp/Windows XP because I really need it and I read everywhere that drivers for NVidia are far better than ATI ones.
    Any advice? What should I try next before getting an 8800 ?
    Is there a diagnostic utility that I can use to test my config including the GC?
    Thanks!

    Hi there aside from my laptop I have an iMac 20" with the same HD 2600 XT card. I recently installed the Catalyst 8.6 driver by using a driver mod from driverheaven, I use Vista 32. By installing it this way I got boosted performance and many issues with the bootcamp drivers were fixed. As you may already know the ATI drivers do not install on bootcamped macs usually but the mod tool fixes this. Its unofficial so do so at your own risk but try it out and see if you get the second monitor if not just rollback. Hope this helps and I didn't want to say too much about the 8.6 driver mod because it may not be allowed here but google will provide any answers.

  • Latest Windows 8.1 update under Boot Camp loses my cursor

    I was having no problems running Windows 8.1 under Boot Camp on my MacBook Pro Retina (2012) with the latest Boot Camp drivers until I tried downloading Microsoft's latest major update to Windows 8.1 (KB2919355). After installing the update, I lost my cursor. The trackpad and a USB mouse both "worked" by highlighting icons and windows at random, but without a cursor I'm flying blind. It seems to be a video or screen driver issue. I chatted with Apple and spoke to Microsoft on the phone. They both suggested that I uninstall the update, which I have done. And that does bring back my cursor. The only hope is that Apple and Microsoft can work out this problem between the Apple drivers and the Microsoft update. I understand that this latest Microsoft update is a prerequisite for future Microsoft updates, so I hope they straighten this out. Is anyone else suffering from this problem?

    Hi
    I have exactly the same problem on my MacBook Pro Retina (early 2013). After updating from Windows 8 to Windows 8.1 (KB2919355) the mouse cursor is invisible on the desktop. On the Lockscreen and Sign In screen the cursor is visible. My resolution is 1920x1200. I connected also another "normal" mouse device and I have the same effect.
    When starting Windows in Safe mode the cursor is visible. When uninstalling the update KB2919355 everything works again.
    See also http://answers.microsoft.com/en-us/windows/forum/windows8_1-windows_update/kb291 9355-makes-mouse-pointer-invisible/b9d014f1-9ec1-4faa-a046-7b96fcd66661 .
    I use the latest version of BootCamp http://support.apple.com/kb/DL1720.
    Thank you to solve this issue.

  • 802.11ac not recognized on Windows 8.1 Pro under Boot Camp.

    I just installed Windows 8.1 Pro under Boot Camp. The issue I am having is that the 802.11ac network is not recognized in Windows. Windows only recohnizes the 802.11n network. When I boot up OSX Yosemite, It works as usual. Anyone else have this problem?

    8/8.1 will install fine but there's some stuff you need to do before starting to ensure no issues
    purchase a retail 8/8.1 license
    use only a USB2 flash drive
    get a clean 8 or 8.1 ISO
    newer machines are more selective with the ISO for some reason (ISOs that worked to install Windows on many different older Macs would not work)
    if you've made lots of changes, hacks and adjustments trying to get this work on your own, you should clean install OSX first, do not restore from time machine and start at step 3 to get Windows installed, you can go back later and copy files back to OSX
    if you want to try without clean installing OSX, here goes
    open boot camp assistant (bca) and choose option 3 ONLY if it reads 'remove/delete' Windows
    open disk utility (du) and confirm that your HD now only has 1 single partition ('macintosh HD' unless you've renamed it)
    restart machine and do a PRAM reset
    open du and repair permissions TWICE
    open bca and choose all 3 options (create, download, install)
    from here, the process follows the standard boot camp instructions (http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf) but pay attention to step 3 where you do have to manually reformat the boot camp partition
    clean ISOs
    http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
    http://getintopc.com/softwares/operating-systems/windows-8-1-download/
    if you are trying to clean install 8.1, google clean install 8.1 with windows 8 key for steps like this
    http://forum.notebookreview.com/windows-os-software/735517-how-install-windows-8 -1-clean-your-windows-8-upgrade-key.html

  • Fios not getting max mbps under boot camp

    I have Macbook Pro c2d unibody. I just got Verzion FIOS. Under Mac OS X Snow Leopard I am able to achieve max download and max upload speed. But under boot camp and windows xp sp3 I am only able to get half down, and almost full up. Does anyone know what the issue could be? I've updated my drivers and everything.

    I'm using the stock wireless card on the macbook pro and the router is the one that verizon uses...not really sure what brand it is. I subscribed for the 25/25 line. I do get the max speed when I'm hard wired. I can also get max speeds when running under Mac OS X wirelessly.
    The funny thing is my brother's laptop (an HP) will get closer to the 25 mbps (max speed) than mine, and he's 2 floors up. My thinking is that it might be a driver issue with boot camp?

  • Resolve trouble between Parallels and Windows under Boot Camp

    After seeing several threads relating to this issue, I decided to make this it's own thread instead of trying to reply to each. hopkinsvscloudlivestream.blogspot.com/2013/03/watch-hopkins-vs-cloud-live-stream-2013.html This article NOW resolves all issues pertaining to using Windows under Boot Camp through Parallels, INCLUDING activation. Hopefully Parallels will be able to integrate these fixes into a future release.
    Before doing anything, I would recommend preparing your existing Windows installation under Boot Camp, for Parallels, before trying to access it through Parallels. If you have already installed Parallels and now have problems, don't worry, this article should address and resolve these issues as well.
    Something to know upfront: using your existing Boot Camp installation with Parallels will most likely require you to activate your Windows installation a second time. The reasons for this are addressed in Section 4 of this article.
    Section 1: Preparing your Boot Camp Installation for Parallels
    (If you already tried to access your Boot Camp installation through Parallels, and can no longer get into Windows through Boot Camp or Parallels, please skip this step and come back to it after you have completed Section 2.)

    Personally, I think the software fix is a band-aid for a larger hardware problem, probably involving the power management circuitry. I think the reason Photo Booth and QuietMBP and Windows XP all work to silence the noise is because they draw more power by using more CPU, and it's the extra power draw that kills the noise. Nothing scientific, mind you, just a hunch.
    What if your speakers made an annoying hum that went away whenever you started playing music through them in iTunes? Would you still think it's a software problem? I think it's a similar situation here - where software can cover up the issue but not really fix it...

  • Connecting Under Boot Camp - WRT610N

    I recently replaced an old Belkin router with the WRT610N.  I've benn very happy with this router with one exception.  I have a Macbook Pro.  Under the Mac operating system, I have not problem connecting.  Running XP under Boot Camp is a diffferent story.  It will connect for a few minutes, but then the link becomes non-responsive (limited ot no connectivity) and I have to log off and then back on.  This never happened with the Belkin router, and other PCs, an Apple TV, and an iPhone connect wirelessly without a hitch.  So I suspect this is something about the Linksys router.
    Can anyone help me with this problem?  It happens on both bands.  If it's relevant, the 5GHz band is network mode Wireless-N only, radio band Auto, WPA2-Personal with WPA-TKIP or WPA2-AES encryption.  The 2.4GHz band (the one I prefer to use for this problamatic connection) is network mode Mixed, radio band Auto, WPA-Personal with TKIP encryption.
    Thanks in advance for any help.

    Upgrade the Firmware on the router as the new firmware has resolved many issues for wireless connection...Also make sure that the radio band for 2.4GHz Frequency is set to standard-20MHz and standard channel should be 11-2.462GHz...Also the network mode should be Mixed on both the frequencies...

  • Does Apple USB modem (or any USB modem) work with Telix under Boot Camp?

    I know, it's one heck of an obscure and specific question. But it just so happens to be critical to whether I try and use an Intel Mac (new, with Leopard, under Boot Camp) as a PC (where a PC would be a lot easier as far as having a built-in 56k modem goes). By Telix I mean the most "recent" version of Telix for Windows. Thanks in advance for the assistance.

    It says it works with the Mac mini, but does it really? I just received my modem yesterday and could not get it to work with my 1.42 mini - the more expensive one that comes without a dialup modem! I looked carefully at the specs and it appears the Apple USB modem requires Mac OS 10.4.3, not the 10.4.2 that comes with the Mac mini.
    Talk about stupid! And the mini docs say it comes with the "latest" version of Tiger. Not! So I can download the upgrade, I guess. IF I could get on the internet! This is extremely annoying. I guess I'll have to download the upgrade on another computer and transfer it somehow. Boy, those Apple guys sure are tech geniuses, aren't they???
    [ Edited by Apple Discussions Moderator ]

  • Fat32 External Hard Drive does NOT mount on Windows XP Pro under boot camp

    I have a gateway 160gb portable external HDD. When it came pre-formatted in NTFS. It mounted on Windows XP under boot camp or Vmware Virtual machine very well.
    I then formatted it under HFS+ to use it with superduper.
    Now that I want to convert it back to NTFS. I formatted it under Fat32 so that windows can recognize it and I can format it again under NTFS.
    The drive mounts fine on Mac OSX leopard but not on Windows XP (bootcamp or Vmware VM). Could someone help? I need this drive to be under NTFS so that I can store work related files which can only be run on Windows and some of the files are larger than 4gb.
    Thank you

    Under Disk Utility>Partition select anything other than 'Current' under 'Volume Scheme', then the format field will light. However, you should have been able to format under Windows Disk Management once it was online. See:
    http://www.microsoft.com/windowsxp/using/setup/tips/advanced/ntfs.mspx

  • No headphones under Boot Camp

    When running Vista x32 under Boot Camp on my 13" MBP, I can't get sound through the headphones - only through the internal speakers. Based on previous recommendations that have been posted, I uninstalled and reinstalled the Boot Camp drivers - but the problem persists. I've tested several different headphones and none work under Boot Camp.
    However, when running OS X or running Vista under Fusion, the headphones work as expected.
    Any recommendations what I should try next?
    thanks!

    Had the exact same issue. I would plug-in my headphones and the sound would continue to come out of the internal speakers instead of the headphones.
    HOW TO FIX
    -Plug in your headphones
    -Right click on the little speaker in the system tray and click on "Playback Devices"
    -Right click on Speakers (Cirrus Logic) and disable
    -The sound should now only be coming out of the headphones

  • How to increase screen resolution in Vista under boot camp?

    I have installed Vista Home Premium under boot camp (OS X 10.5.7) but in preferences I can only get the maximum of 1280x960 while my screen resolution on SyncMaster P2250 in OS X is 1920x1080.
    (I am using new Mac mini with NVIDIA GeForce 9400).
    I have inserted Leopard disc in Vista and installed boot camp but still I can't make the resolution higher.

    OK everything works fine! The problem was that after installation of Vista I was inserting old Leopard disc that I bought a year ago instead of inserting the Mac OS X installation disc that I got with new Mac mnini.
    When I put the Mac OS X that was toghether with new Mac mini it installed missing driver and everything started working

  • Just got Verizon FIOS 25/25 - Can't get max mbps under boot camp

    I have Macbook Pro c2d unibody. I just got Verzion FIOS. Under Mac OS X Snow Leopard I am able to achieve max download and max upload speed. But under boot camp and windows xp sp3 I am only able to get half down, and almost full up. Does anyone know what the issue could be? I've updated my drivers and everything.

    You want to post in the Boot Camp forum:
    http://discussions.apple.com/category.jspa?categoryID=237

  • How to enable VT-x for Win 7 boot camp partition MacBook pro?

    I am trying to install HAXM to accelerate my android emulator, but I am having problems. I have a Win 7 bootcamp partition in my Macbook Pro, and when I am finishing the installation a message pops up saying that my VT-x is not enabled, the problem is that I can't access the BIOS to turn on the virtualization easily like a PC user, How to enable the VT-x for Win 7 boot camp partition?
    The VT-x is running beautiful in my macintosh partition, but I can't understand why in my boot camp partition the VT-x remains disabled.
    My processor is a Intel Core I5-2435M , I downloaded the intel processor identification utility, and my processor supports the virtualization tech and hyper-threading tech.

    You can return that Mac for a full refund if it is less than 14 days from date of purchase.
    themsbg wrote:
    I have the same problem. Have you figured this out yet? I just bought a MacBook Air 2013. I thought I would be able to use Virtualization because it has a supported processor, but now it won't work in Boot Camp.

  • IMac with 3TB Fusion drive will not partition under Boot Camp

    I have a 27" iMac with a 3TB Fusion drive and I am using 10.8.4.
    I am trying to install Windows 8 Pro with Boot Camp.  Everything starts well enough, but once I get to "Create a Partition for Windows" and setting a 505 GB Windows partition, it begins the process, but then seems to stop progressing with the status indicator pretty much stopped at a point directly under the "d" in the "Status: Partitioning disk.."
    I've let it run for the past 1.5 hours and it hasn't budged.
    This is not my first attempt at doing this on this machine.  I tried manually partitioning with Disk Utility which pretty much ended up in a disaster that I was able to repair with some difficulty.  That was covered in this thread.
    I realize that 3TB drives were not supported under 10.8.3, but I thought that was fixed.  Am I wrong? 

    This is a bit of a guess and you might have do a bit of further reading to understand what I am trying to say but basically:
    When you buy a Mac - its Hard Disks come partitioned using the GPT partitioning scheme that is used for the UEFI boot process (All new Windows 8 badged computers have UEFI now as well - Macs have been using it for years). This is opposed to the old MBR partitioning scheme that was used with the BIOS boot process.
    There are quite a few limitations of the MBR partitioning scheme including:
    1. A limit of 4 partitions per volume
    2. A limit of 2 TB per partition
    3. Poor support for AHCI
    When you run Boot Camp - it turns your partitioning into a hybrid of the two, so you get stuck with all the limitations of MBR - with the second bullet point above I suspect of giving you issues.
    You have a couple of possible solutions:
    1. Test with having all partitions less than 2 TB
    or
    2. (Technical) Try and install Windows 8 in EFI mode - its a bit tricky at the moment and a little bit of work - but I have it working on my MacBook Pro (although I do have nVidia graphics driver issues that you may or may not encounter as well). See my wiki at multiboot.info for links if you want to attempt this

  • Crysis Warhead 64-bit Won't Work with Windows 7 64-bit Under Boot Camp

    Hi. I installed the patch 1.1 for Crysis Warhead which has the 64-bit version of the game which I'm running under Windows 7 64-bit on Boot Camp and I've tried the the compatibility mode (Vista to Vista SP2). I've also updated the ATI drivers as well as the Boot Camp drivers. I'm using the latest Snow Leopard.
    When I click on the game's application (64-bit version), it would launch then it goes black with just the mouse cursor (you can move it about) which seems to be in low resolution and I guess it would crash so I would push the button on this late iMac 2009 and Windows would go back to the desktop then shutdown.
    Has anyone made Crysis Warhead 64-bit work with Boot Camp Win7 64-bit with this iMac (it has the ATI 4850)? Is this because it's Boot Camp or that it's Windows 64-bit or is it the ATI graphics chip? Thank you in advance. Gbu.
    Message was edited by: Alvin777

    since bootcamp allows windows to run natively, it's not an imac issue, but rather an issue with your windows, so you probably get better answers in a windows forum or the crysis forums.
    in any case, installing newer ATI drivers (ati.com) might help, but it's just a wild guess

Maybe you are looking for