"Invali date" error on Portal for termination PCR.

Hi Experts,
I am working on termination PCR. when I check my PCR on Portal it works very fine when the value in the effective date field is sy-datum.But when the date is changed to any other than sydatum then On portal i get an error message as "INVALID DATE".Th BADI which I m using is QISR1.
please let me know where to check for this error and how to resolve it?
Thanks in Advance.
Sarang

Hi Anand,
I am facing the same problem. Were you able to resolve that issue? if so, what is the solution? I don't find any relevant note for this.
Probelm: BRF is activated and when you do save/check on SC, throws short dump with error message as
"Dynamic type conflict when assigning references".
"MOVE_CAST_ERROR" "CX_SY_MOVE_CAST_ERROR"
Thanks
Akbar

Similar Messages

BADI triggered from Portal for Termination process

Hi,
I have the requirement to check for User parameters and verify data while a PERNR is terminated from Portal side.
To do this I will need a BADI which is triggered from Portal.
I have got a couple of BADIs but not sure which one to use. Anyone has come across such requirement?
Also I need to filter values for F4 help depending on the authorization in Portal -> Personal info->Additional details.
I need to put filter on the Subtypes available.
I was thinkling of using WD_BADI to implement this.
but there is very few help available for this BADi. Has anyone ever used this?
ags.

put an external break point on CL_EXITHANDLER->GET INSTANCE method.
now start your portal.
each time an exit/badi is available, the debugger will start. this way you can check the exact BADI as exact position.

Error in portal for SRm trnasactions

Hi,
Im working on SRM 7.0 with EP 7.0.When logging into portal ,i get this following errors if i click on any of the SRM transactions(Procurement and Purchasing menu) .
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 06:16_26/05/09_0159_16270850
Portal runtime error.
An exception occurred while processing your request. Send the exception ID to your portal administrator.
Exception ID: 06:16_26/05/09_0160_16270850
Refer to the log file for details about this exception.
Is this issue related to mapping of the SRM and Portal user ID's?Has anyone come across this problem?Any inputs will be highly appreciated.
Thanks in advance.
BR.
SRM tech

Hi Michael,
Thanks for the prompt reply.However cna you explain in detail(prefreably with the path) as to how do I check the End user flag settings in portal using the System admin and also the relevant system alias settings?
Thanks again for your time.

Validity Date options in the Portal for Child Subtype

Hi All,
For Child Subtype, the three options
1. Valid from Today
2. Valid as of Future Date
3. Validity Period
are present in the portal depending on the usecase maintained. For the 2nd & 3rd option, the user can enter only future dates.
Past dates are not allowed to be entered from the portal but are allowed in the backend.
We have a requirement of allowing past dates from the portal. But when we try to do this, we get an error 'Start data should be today's date or later'.
What is the reason of preventing past dates for the record in the portal when this is available in backend?
Thanks,
Anushree

Hi
Some companies don't want employees to be able to back-date records for children due to eg. rules for reimbursement, absence quotas etc. They want HR-department to check if setting dates in past is OK.
But you can change this behaviour by creating an implementation of HRXSS_PER_BEGDA. It is found in PTARQ -> Customizing-> Service-specific settings ->Own data -> Change default start date.
Make sure you test the use case, because not all use-cases allow setting dates.
Code would be like this:
method IF_EX_HRXSS_PER_BEGDA~DEFAULT_DATE.
data: ls_t7xsspersubtype type t7xsspersubtype.
if infty eq '0021'.    -> Add subtype if needed
Get use-case
    select single * from t7xsspersubtype
      into ls_t7xsspersubtype
      where molga eq molga
        and infotype eq infty
        and subtype eq subty.
Set begda='19000101' if use-case is A*
    if sy-subrc eq 0 and
       ls_t7xsspersubtype-usecase+0(1) eq 'A'.
      begda = '19000101'.
    endif.
endif.
endmethod.
Hope this helps
/Kirsten

Error starting Portal or Commerce Server when Configured for Oracle

I've been attempting to configure Portal 4.0 to work with Oracle. I'm running Oracle
8i. I carefully followed the instructions found in "Configuring WebLogic Portal for
Oracle Databases". Specifically, I setup the tablespaces, connection pools and successfully
run the scripts to populate the tables. I am confident the Oracle OCI driver is configured
properly (have done this many times). However, after I make all of the necessary
changes and launch the server, I receive the following error:
Starting WebLogic Server ....
<Jun 26, 2002 4:47:32 AM PDT> <Notice> <Management> <Loading configuration file .\config\wlcsDomain\config.xml
..> <Jun 26, 2002 4:47:39 AM PDT> <Emergency> <Server> <Unable to initialize the
server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError: Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
at weblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
The startup appears to have trouble with the RDBMS security realm. I tried a) leaving
the settings "as-is", configured for Cloudscape, or b) modified to point to my instance
of Oracle (are their additional things I need to load in Oracle to support it using
the RDBMS realm). Is there a way I can disable the security realm to at least get
the server up-and-running (via the web.xml). I've installed and reinstalled many
times, trying various combinations of things.
Any help would be hugely appreciated!
Thanks,
jeff

I finally found this bug in the release notes, i'm surprised one of the bea guys couldn't
answer this....
"Mike Friesen" <[email protected]> wrote:
>
I had the same type of problem with portal 4.0. Trying downloading the
newest 7.0, I found it works much better.
Mike
"K C" <[email protected]> wrote in message news:[email protected]...
I found this as well. However, i still am not able to run the portal afterconfiguring
for oracle. While running create_all, i get many errors like "can binda
LONG value
only for insert into a LONG column"
the table are being created, this appears to occur in the "insertingrequired bootstrap
data" phase.
thanks
"Joshua Davies" <[email protected]> wrote:
You probably followed the instructions too closely. I had the same
problem,
due to
something that's not quite a "bug" in the installation instructions.Look
back at
the section "Update Settings for the RDBMS Security Realm" in thedeployment
guide
(http://edocs.bea.com/wlp/docs40/deploygd/oraclnew.htm#1039294).
In the table in step 2, they show the URL on top, and the Driverclassname
underneath
it. HOWEVER... on the actual data screen, the Driver is on top and the
URL is underneath
it. If you're not being very very careful, it's easy to swap thesetwo
values
and put the URL in the Driver input box and the Driver in the URL input
box. Make
sure you haven't accidentally done this; if you have, you can stillchange
this in
the config.xml file (do a text search for an element RDBMSRealm withan
"name" attribute
of "wlcsRealm").
Verify that it looks like this:
<RDBMSRealm DatabaseDriver="weblogic.jdbc.oci.Driver"
DatabaseURL="jdbc:weblogic:oracle"
Name="wlcsRealm"
and not this:
<RDBMSRealm DatabaseDriver="jdbc:weblogic:oracle"
DatabaseURL="weblogic.jdbc.oci.Driver"
Name="wlcsRealm"
Very subtle gotcha...
"Jeff Davis" <[email protected]> wrote:
I've been attempting to configure Portal 4.0 to work with Oracle. I'm
running
Oracle
8i. I carefully followed the instructions found in "Configuring WebLogic
Portal for
Oracle Databases". Specifically, I setup the tablespaces, connectionpools
and successfully
run the scripts to populate the tables. I am confident the Oracle OCIdriver
is configured
properly (have done this many times). However, after I make all of thenecessary
changes and launch the server, I receive the following error:
Starting WebLogic Server ....
<Jun 26, 2002 4:47:32 AM PDT> <Notice> <Management> <Loading
configuration
file .\config\wlcsDomain\config.xml
...> <Jun 26, 2002 4:47:39 AM PDT> <Emergency> <Server> <Unable toinitialize
the
server: 'Fatal initialization exception
Throwable: java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
atweblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
atweblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
'>
The WebLogic Server did not start up properly.
Exception raised:
java.lang.IllegalAccessError:Exception[com.bea.p13n.security.realm.RDBMSException:
An error occured creating a database connection for the realm.]
at weblogic.security.acl.Realm.getRealm(Realm.java:91)
at weblogic.security.acl.Realm.getRealm(Realm.java:62)
atweblogic.security.SecurityService.initializeRealm(SecurityService.java:258)
atweblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:402)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
The startup appears to have trouble with the RDBMS security realm. Itried
a) leaving
the settings "as-is", configured for Cloudscape, or b) modified to point
to my instance
of Oracle (are their additional things I need to load in Oracle tosupport
it using
the RDBMS realm). Is there a way I can disable the security realm toat
least get
the server up-and-running (via the web.xml). I've installed andreinstalled
many
times, trying various combinations of things.
Any help would be hugely appreciated!
Thanks,
jeff

Error:Activation of data records from ODS object terminated

Hi All
i got error while loading the data "Activation of data records from ODS object terminated '
could you please tell me procedure how can i solve this issue?
regards
vasu.

- First check the Error Messages from the context menu of the activation step. Also check ST22 & SM21. This will tell you where the error is. Sometimes you might get duplicate records.
- Next use the "Manage" context menu for the ODS in RSA1. Check if any of the previous records are red. If its red, it would mean that either load/activation has failed for previous request which needs to be corrected first b4 you correct the current one.
- If al the above are OK, simply repeat the Activation step.
Hope this helps.
Regards
Anujit Ghosh

ODS activation error"Activation of data records from ODS object terminated"

Hi All,
While activating ODS request I am getting following error
"Activation of data records from ODS object KFI02O50 terminated ".
data load is suceesful for ODS but during activation of the request it is giving error.
I tried to change the status to green manually & then activated the request but still same problem.
Also I tried to delete request & loaded again from PSA & then activated the request but still same problem
If anybody has some solution please let me know.
Thanks in advance
Regards
Sonal

Hi Sonal,
Sometimes when there is erroeneous records that time while activating the Request request get fails.To check this go to manage tab of the ODS there under log u can see the log icon click on that and check y activation got failed..
Assign points if its helpful
Regards,
vid.

Error message "Data cannot be maintained for set type COMM_PR_PUR_1

Hi
While replicating the material master through R3AS I am getting an error for which the details to be checked in SMW01. In SMW01 when I selected the record for error details I am getting above error message. How to resolve ? Pls guide me stepwise. For your information I has cleared SMQ1 in R3 & SMQ2 in SRM
For curioisity next I selected all such error logs & deleted. It gave me one warning (some inconstinecies error) which I ignored. After that I checked SMQ1 of R3 & SMQ2 of SRM. No log
But I observed a strange thing. Whatever material codes I am creating it is going straightway to SRM without running R3AS transaction. I checked R3AM1, selected the row and cancelled. But still going without any interferrance. Why ? How shall I stop this.
Thanks

Hello,
>
BNR wrote:
> Hi
> While replicating the material master through R3AS I am getting an error for which the details to be checked in SMW01. In SMW01 when I selected the record for error details I am getting above error message. How to resolve ? Pls guide me stepwise. For your information I has cleared SMQ1 in R3 & SMQ2 in SRM
>(...)
Have a look at OSS note 1049693 - Data cannot be maintained for set type COMM_PR_PUR_1.
Regards.
Laurent.

Error :Unable to retrieve data from iHTML servlet for Request2 request

I open bqyfile to use HTML in workspace.
When I export report to excel in IR report.
Then I press "back" button I get error"Unable to retrieve data from iHTML servlet for Request2 request "
And I can not open any bqyfiles in workspace.
Anybody gat the same question? Thanks~

Hi,
This link will be helpful, the changes is made in the TCP/IP parameter in the registry editor of Windwos machine. I tried the 32 bit setting for my 64 bit machine (DWORD..) and it worked fine for me..
http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html
Hope this helps..

Error while reading access data (URL, user,password) for the Adapter Engine

Hi,
Any idea on below message? I am doing file to file scenario and got the below tarce from sxmb_moni.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.pi1.piserver1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>no_messaging_url_found: Unable to find URL for Adapter Engine af.pi1.piserver1</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading access data (URL, user, password) for the Adapter Engine af.pi1.piserver1</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks
Balaji

It looks like the adapter engine is not able to register him self on SLD, you have to check in the SLD the "Exchange Infrastructure" domain, you have to verify restarting the J2EE the adapter engine update the entries in the SLD related to the specific XI Domain.
Launch Visual Administrator >> Server >> Services >> SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Sandro

'Invalid data' error for outbound 850

We are transforming a OAG process_po_007 to EDI 850.xml in BPEL and enqueing the message to B2B out queue. We are receiving 'Invalid Data' error in B2B log. Following is the 850.xml file. Also I am attaching some portion of the B2B.log at the end. Any help will be appreciated.
Thanks
Saumitra
----------------------------------------------850.xml--------------------------------------------------------------
<?xml version="1.0" ?><Transaction-850 xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap" xmlns:ns1="http://www.edifecs.com/xdata/100" XDataVersion="1.0" Standard="X12" Version="V4010" CreatedBy="ECXEngine_899" CreatedDate="2007-04-19T14:17:00" xmlns="http://www.edifecs.com/xdata/100">
<ns1:Segment-ST>
<ns1:Element-143>850</ns1:Element-143>
<ns1:Element-329>00001</ns1:Element-329>
</ns1:Segment-ST>
<ns1:Segment-BEG>
<ns1:Element-353>00 </ns1:Element-353>
<ns1:Element-92>AB</ns1:Element-92>
<ns1:Element-324>Purchase Ord</ns1:Element-324>
<ns1:Element-328>Release Number</ns1:Element-328>
<ns1:Element-373>20070419</ns1:Element-373>
</ns1:Segment-BEG>
<ns1:Segment-ITD>
<ns1:Element-351>8</ns1:Element-351>
<ns1:Element-352>Scheduled for payment 45 days from the invoice date (invoice terms date = system date, goods received date, invoice date or invoice received date). Invoice terms date can default from supplier header, site, PO, system default, etc.</ns1:Element-352>
</ns1:Segment-ITD>
<ns1:Loop-N1>
<ns1:Segment-N1>
<ns1:Element-98>01</ns1:Element-98>
<ns1:Element-93>Allied Manufacturing</ns1:Element-93>
<ns1:Element-67>Code Identification</ns1:Element-67>
</ns1:Segment-N1>
<ns1:Segment-N3>
<ns1:Element-166>1145 Brokaw Road</ns1:Element-166>
</ns1:Segment-N3>
<ns1:Segment-N4>
<ns1:Element-19>San Jose</ns1:Element-19>
<ns1:Element-156>CA</ns1:Element-156>
<ns1:Element-116>95034</ns1:Element-116>
<ns1:Element-26>US</ns1:Element-26>
</ns1:Segment-N4>
<ns1:Segment-PER>
<ns1:Element-366>BD</ns1:Element-366>
<ns1:Element-93>Veronica Francis</ns1:Element-93>
<ns1:Element-365>EM</ns1:Element-365>
<ns1:Element-364>Communication Number</ns1:Element-364>
</ns1:Segment-PER>
</ns1:Loop-N1>
<ns1:Loop-PO1>
<ns1:Segment-PO1>
<ns1:Element-350>ASSI</ns1:Element-350>
<ns1:Element-330>471.814718</ns1:Element-330>
<ns1:Element-355_1>01</ns1:Element-355_1>
<ns1:Element-235_2>VP</ns1:Element-235_2>
<ns1:Element-234_2>AS65103</ns1:Element-234_2>
</ns1:Segment-PO1>
</ns1:Loop-PO1>
<ns1:Loop-CTT>
<ns1:Segment-CTT>
<ns1:Element-354>1</ns1:Element-354>
</ns1:Segment-CTT>
</ns1:Loop-CTT>
<ns1:Segment-SE>
<ns1:Element-96>7</ns1:Element-96>
<ns1:Element-329>00001</ns1:Element-329>
</ns1:Segment-SE>
</Transaction-850>
----------------------------------B2B.log--------------------------------------------------------------------
2007.04.19 at 16:21:01:957: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeTime = #SystemTime(HHMM)#
2007.04.19 at 16:21:01:958: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter AcknowledgementType = 997
2007.04.19 at 16:21:01:958: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter GroupSenderID = Acme
2007.04.19 at 16:21:01:958: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeECSFileBlob
2007.04.19 at 16:21:01:958: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeAuthorizationInfoQual = 00
2007.04.19 at 16:21:01:958: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter GroupID = PO
2007.04.19 at 16:21:01:958: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter TagDelimiter = 0x3d
2007.04.19 at 16:21:01:958: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter TransactionECSFileKey = 2A956714556799C0E040A341E4CD2203-274-1-4
2007.04.19 at 16:21:01:959: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeSecurityInfoQual = 00
2007.04.19 at 16:21:01:959: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter GroupECSFileBlob
2007.04.19 at 16:21:01:959: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter TPName = GlobalChips
2007.04.19 at 16:21:01:959: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter TransactionImplementationReference = null
2007.04.19 at 16:21:01:959: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter ReplacementChar = 0x7c
2007.04.19 at 16:21:02:989: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Enter
2007.04.19 at 16:21:02:989: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl fullOutboundBatching = false
2007.04.19 at 16:21:02:990: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl validateEnvelope = false
2007.04.19 at 16:21:02:990: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Leave
2007.04.19 at 16:21:04:986: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:reset Enter
2007.04.19 at 16:21:04:986: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:reset Leave
2007.04.19 at 16:21:05:017: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument XML = 1
2007.04.19 at 16:21:05:018: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument no result from XDataToNative
2007.04.19 at 16:21:05:293: Thread-12: B2B - (DEBUG) iAudit report :
Error Brief :
5084: XEngine error - Invalid data.
iAudit Report :
<?xml version="1.0" encoding="UTF-16"?><AnalyzerResults Guid="{7E87F228-EEB3-11DB-B92D-001143EB889E}"> <ExecutionDate>Thursday, April 19, 2007</ExecutionDate> <ExecutionTime>04:21:03 PM (EDT)</ExecutionTime> <AnalyzerReturn>Failed</AnalyzerReturn> <NumberOfErrors>1</NumberOfErrors> <ErrorByCategory> <Category Name="Rejecting"> <Severity Name="Normal">1</Severity> </Category> </ErrorByCategory> <Status>Finished</Status> <DataFile> <FilePath/> <FileName/> <LastModified/> <FileSize/> <DataURL>file://</DataURL> </DataFile> <AnalyzerErrors> <Error ErrorCode="{F35AFE03-C479-4F96-B4F1-2EF36DABC5FE}" Severity="Normal" Category="Rejecting" Index="1" ID="50840000"> <ErrorBrief>5084: XEngine error - Invalid data.</ErrorBrief> <ErrorMsg>Invalid data.</ErrorMsg> <ErrorObjectInfo> <Parameter Name="ErrorLevel">0</Parameter> <Parameter Name="Name">XData2Native</Parameter> <Parameter Name="_ec_dn_guid_">{7F0C043C-EEB3-11DB-B92D-001143EB889E}</Parameter> <Parameter Name="_ec_index">0</Parameter> <Parameter Name="ec_error_scope">Document</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1/> <ErrData/> <Part3/> <DataXPointer> <StartPos>0</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </AnalyzerErrors></AnalyzerResults>
2007.04.19 at 16:21:05:327: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sErrorGuid = {F35AFE03-C479-4F96-B4F1-2EF36DABC5FE}
2007.04.19 at 16:21:05:327: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sDescription = Invalid data.
2007.04.19 at 16:21:05:327: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sBrDescription = 5084: XEngine error - Invalid data.
2007.04.19 at 16:21:05:328: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sParameterName = ErrorLevel sParameterValue = 0
2007.04.19 at 16:21:05:328: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sParameterName = Name sParameterValue = XData2Native
2007.04.19 at 16:21:05:328: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sParameterName = ecdn_guid_ sParameterValue = {7F0C043C-EEB3-11DB-B92D-001143EB889E}
2007.04.19 at 16:21:05:329: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sParameterName = ecindex sParameterValue = 0
2007.04.19 at 16:21:05:329: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sParameterName = ec_error_scope sParameterValue = Document
2007.04.19 at 16:21:05:329: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument added Hash Key = {7F0C043C-EEB3-11DB-B92D-001143EB889E}
2007.04.19 at 16:21:05:329: Thread-12: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument batch Position = 0
2007.04.19 at 16:21:05:330: Thread-12: B2B - (ERROR) Error -: AIP-51505: General Validation Error
at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.processOutgoingDocument(EDIDocumentPlugin.java:1662)

Hello Saumitra,
Can you please validated the Edifecs XML you are genering from BPEL against the XSD generated out of spec builder. If you still find this as an issue please send us the ecs, xsd and the xml generated from BPEL for further review.
Rgds,Ramesh

ERROR OGG-01148 programming error, data type not supported for column

I am getting following error when I put null in insert statement
2011-03-31 18:30:45 ERROR OGG-01148 programming error, data type not supported for column TXID in table advoss.tblaudittrail.
I am replicating MySQL 5.5.9 to Oracle 11g rel2 via goldengate 11

I am able to diagnose what is cuasing the problem
unsigned flag was the culprit of this error
I am able to insert null after removing unsigned flag.
thank you very much for your kind support

Portal 4.0 fatal error when config for MSSQL

I've been trying to configure the portal 4.0 to use MSSQL 2000. I followed
the instructions in the MSSQL addon file. However, after I tried to change
the security realm setting and restart the server, I always get a fatal
error like the following:
Throwable: Exception[com.bea.p13n.security.realm.RDBMSException: An error
occured getting the realm delegate.]
Exception[com.bea.p13n.security.realm.RDBMSException: An error occured
getting the realm delegate.]
at com.bea.p13n.security.realm.RDBMSRealm.getUser(RDBMSRealm.java:239)
at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:806)
at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:670)
at
weblogic.security.acl.internal.FileRealm.getPrincipalFromAnyRealm(FileRealm.
java:1008)
at
weblogic.security.acl.internal.FileRealm.ensureRequiredObjectsExist(FileReal
m.java:957)
at
weblogic.security.acl.internal.FileRealm.loadMembers(FileRealm.java:1202)
at
weblogic.security.SecurityService.initializeRealm(SecurityService.java:274)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:390)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35
I know that my setting for the commerce pool and datasync pool are correct.
I could see the connection in the SQLServer console. Is it necessary to
change the setting of security realm? Can I just turn off the setting to
avoid this error( and how??)? Also when I unchecked 'user CLOB for read'
and 'use CLOB for write' setting in the application domain, I can see the
'deserializing' error from the console. Did you guys entercounter the same
problem when configurate Weblogic Portal for SQLServer? Pls advise.
Thanks.
Cal

Hi.
Please try posting this question in
weblogic.developer.interest.personalization. Folks reading that newsgroup are
more familiar with portal config issues.
Regards,
Michael
cal wrote:
I've been trying to configure the portal 4.0 to use MSSQL 2000. I followed
the instructions in the MSSQL addon file. However, after I tried to change
the security realm setting and restart the server, I always get a fatal
error like the following:
Throwable: Exception[com.bea.p13n.security.realm.RDBMSException: An error
occured getting the realm delegate.]
Exception[com.bea.p13n.security.realm.RDBMSException: An error occured
getting the realm delegate.]
at com.bea.p13n.security.realm.RDBMSRealm.getUser(RDBMSRealm.java:239)
at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:806)
at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:670)
at
weblogic.security.acl.internal.FileRealm.getPrincipalFromAnyRealm(FileRealm.
java:1008)
at
weblogic.security.acl.internal.FileRealm.ensureRequiredObjectsExist(FileReal
m.java:957)
at
weblogic.security.acl.internal.FileRealm.loadMembers(FileRealm.java:1202)
at
weblogic.security.SecurityService.initializeRealm(SecurityService.java:274)
at weblogic.security.SecurityService.initialize(SecurityService.java:115)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:390)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35
I know that my setting for the commerce pool and datasync pool are correct.
I could see the connection in the SQLServer console. Is it necessary to
change the setting of security realm? Can I just turn off the setting to
avoid this error( and how??)? Also when I unchecked 'user CLOB for read'
and 'use CLOB for write' setting in the application domain, I can see the
'deserializing' error from the console. Did you guys entercounter the same
problem when configurate Weblogic Portal for SQLServer? Pls advise.
Thanks.
Cal--
Michael Young
Developer Relations Engineer
BEA Support

Error while reading access data (URL, user, password) for the Adapter Engin

Hi all,
I encountered a red flag in sxmb_moni and when I click on the flag, I get the following message:
Error while reading access data (URL, user, password) for the Adapter Engine
Is there any way I can resolve this? thanks all
Regards,
IX

Possible reason is Adapter engine is not registered on SLD. Check in SLD.
You can also try restarting J2EE adapter engine and update SLD entries specific to XI domain.
Lauch Visual admin go to Server > services > SAP AF CPA Cache
Enter the appropriate values for:
SLD.selfregistration.hostname (Use fully qualified hostname)
SLD.selfregistration.httpPort
SLD.selfregistration.httpsPort
Finally, if all the above seem to be correct check the userID / pwd for user ID : PI*.

Error when reading the access data(URL,user, password) for Adapter Engine

Hi,
We are getting this error in production system
"SXMBSysErrorAlerts, Category INTERNAL, Error code: AE_DETAILS_GET_ERROR error text: Error when reading the access data (URL, user, password) for the Adapter Engine".
Please tell what can be the cause of error. Where are the access data (URL, user, password) for the Adapter Engine read from?
Its urgent. We are in support project.
regards,
john

Hi jhon,
please check the following threads to resolve the problem.
AE_DETAILS_GET_ERROR
Error : no_adapter_engine_found: Unable to find Adapter Engine
regards
mahesh.

"Invali date" error on Portal for termination PCR.

Similar Messages

Maybe you are looking for