Inventory analysis Cube 0IC_C03

Hi Experts,
I am unable to work with 0IC_C03 cube in BI 7.0. I didn't find
standard transformations for this cube.
Please let me know the data flow for 0IC_C03 cube in BI 7.0.
Advanced Thanks,
Chandra

Please check this out.
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
You can install three Transformations from Business Content corresponding to the following three DataSources:
        2LIS_03_BX
        2LIS_03_BF
        2LIS_03_UM

Similar Messages

Inventory Management Cube 0ic_c03, 0StockType

In the Inventory Management Cube 0ic_c03 queries,I've found that 0StockType has descriptions that are misleading because of the way they are written in domain bstaus (R3 side), especially when seeing the key and SHORT description (truncated beyond meaning).
OK I can correct these by changing BStaus 's texts.
The main changes I'd do are for the Customer Consigment, Customer Return Packaging and Material Provided to Vendor descriptions.
But what does 0StockType 'blank' (or #) mean ?
(It seems to mean something like Valuated Stock Valuation and 'Not Defined' is not very good in a Query result)

Well, no one replied, but I got feedback from OSS. So just in case anyone is interested.....
I had to use r3 > se11 to change the domain descriptions myself.
Bstaus 'blank' I put as 'Valuation'
I also improved some of the Bsttyp descriptions whilst there

Missing content for inventory management (cube 0IC_C03)

Hi everybody,
I installed the following BI content for inventory management: Cube 0IC_C03, InfoSource 2LIS_03_BX and transfer rules from data source 2LIS_03_BX to info source 2LIS_03_BX. However, I'm not able to the update rule from info source 2LIS_03_BX to info cube 0IC_C03. I can only find the old update rule 0IC_C032LIS_40_S278 -> 0IC_C03.
I also couldn't find the update rule for material movements from 2LIS_03_BF to infocube 0IC_C03.
How can I find this missing content. We are using BI Content Release 704 Level 1.
Thanks for your help!
Thomas

Hi Oscar,
unfortunately, I was not able to find a transformation for the datasource migrated to 7.0.
Btw, how do I determine to which version data sources are replicated. I have an underlying ECC6.0 system. When I replicate all data sources for that source system, datasources automatically show up as 7.0. I'm missing the pop-up question whether or not I want to replicate as 3.5 or 7.0.
Thanks in advance!
Thomas

Queires on Non-Cumulative Inventory Management Cube 0IC_C03 Not Working

Hello all.
I am trying to use the 0IC_C03 Inventory Management cube with non-cumulative key figures. I followed the How to...Handle Inventory Management Scenarios in BW paper to a tee.
Steps I followed:
1. Ran initialization of beginning balance with 2LIS_03_BX
2. Ran the historical job with 2LIS_03_BF
3. Uploaded to BW the Initialization (BX) and compressed without setting the "No Marker Update" flag
4. Uploaded the historical movements (BF) and compressed setting the "No Marker Update" flag
Now, to this point, everything was fine. Quantities were as expected. Dollar values were as expected. The problem occurs once I load deltas:
5. Loaded delta for 2LIS_03_BF and compressed without setting the "No Marker Update" flag as instructed in the How To... paper
Query example:
MATERIALA:
Initial Stock Balance = 1000 EA
Delta had stock issue of 150 EA (so the stock balance should have decreased from 1000 to 850)
Now, I have the record in BW showing the stock issue of 150. However, the non-cumulative key figure within the query still shows 1000. And when I drill down by calendar day, I would expect the result to show 850, but it seems to add the 150 before taking it away resulting in 1000 which is actually the initial stock balance. It is like it is not recognizing the updates.
Any help would be appreciated.
Thanks,
Brent

Hi!
Here is what helped in my case, very similar to your:
In DTP for 2lis_03_bx (not only in infopackage, as it is said in manual!) you have to change "Extraction Mode" parameter to "Initial Non-cumulative for Non-cumulative values"

Strorage location is initial in Inventory movements cube 0IC_C03.

Hi -
I have a requirement to show total inventory value by Storage locations for selected dates. I have activated business content and loaded data into Infocube as per how to document.... But 0STOCTYP, 0STOR_LOC and 0BATCH are not filling in Infocube. As per SAP they are left initial in transformations and not getting filled during data load. I found a SAP note on it but it is giving solution for single material value in particular storage location. I went through how to document for this situation in SDN. Can anyone please help me if you have any other solution for this issue. Please don't direct me to sap notes and how to documents. Please let me know if you need any extra information. Thanks in advance.
Regards
Anesh B

HI,
Map the fields to the R3 Fields as below
BSTAUS - Stock Type
CHARG - Batch
LGORT - Storage location
These fields has to be mapped to get correct stock in Inventory. Dont leave them as initial in transformation mapping.
Map them and load it and check the data you will get the issue fixed.
Thanks,
Arun

Inventory cube 0IC_C03 ,Stock on particular date

Hi All,
   We are trying to get the stock on a particular date using cube 0IC_C03 ,but we are unable to get the total stock on a given date.
1)Ex: I want stock on 01.12.2009 ,but in the query output I am getting null values.
I am only getting the total stock quantity on the loaded date for ex:04.01.2010(which is my data loading date in to the cube).
2)And when we restrict 0calday with <=01.12.2009 ,i have to get the total stock till 01.12.2009
Thanks&regards,
Sunitha

Hi,
Check
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
1)Ex: I want stock on 01.12.2009 ,but in the query output I am getting null values.
   I am only getting the total stock quantity on the loaded date for ex:04.01.2010(which is my data loading date in to the cube).
For 2LIS_03_BX it will give the extracted date only
2)And when we restrict 0calday with <=01.12.2009 ,i have to get the total stock till 01.12.2009
try with below options.
Use :
0VALSTCKVAL   " for Value
0VALSTCKQTY   " for Qty
0CALMONTH        " for Month
Use the above combinations in New Selections in columns and go it.
For Qty Opening:
New Selection bad drag abd drop following things
0VALSTCKQTY   " for Qty
0CALMONTH        " for Month and restrict with less then or equalto option variable (single value, user input) and set the offeset
                               value = -1 bcoz if user will give 12.2009 , so it will display 11.2009 closing stock, this is opening for 12.2009.
For Qty Closing:
New Selection bad drag abd drop following things
0VALSTCKQTY   " for Qty
0CALMONTH        " for Month and restrict with less then or equalto option variable (single value, user input) .
In the same way build for Value and other Keyfigures on 0IC_C03.
And
Drag & drop
0MATERAIL
0PLANT " Give some Input Variable.
See the steps.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
Thanks
Reddy

Inventory loads to cube 0IC_C03

Hi Guys ,
I am loading data to Inventory Cube 0IC_C03 .I have done all the steps .I have 1 question ie ..intilally i loaded data to cube from 2LIS_03_BF data source .I did the following steps :
u2022 Init Delta (2LIS_03_BF) with data transfer.
u2022 Release Request with No Marker Update (Tick).
Now from tomorro we will get delta loads .My question is do we need to compress delta request with NO MARKET UPDATE (TICK) ?
Or
Do i need to unTick The option NO MARKER UPDATE .
The data is very critical here .Please let me know if you have the right answer .
Regards
Santosh

Hi,
Pl look at below
Marker Update is used to reduce the time of fetching the non-cumulative key figures while reporting. It helps to easily get the values of previous stock quantities while reporting. The marker is a point in time which marks an opening stock balance. Data up to the marker is compressed.
The No Marker Update concept arises if the target InfoCube contains a non-cumulative key figure. For example, take the Material Movements InfoCube 0IC_C03 where stock quantity is a non-cumulative key figure. The process of loading the data into the cube involves in two steps:
1) In the first step, one should load the records pertaining to the opening stock balance/or the stock present at the time of implementation. At this time we will set marker to update (uncheck 'no marker update') so that the value of current stock quantity is stored in the marker. After that, when loading the historical movements (stock movements made previous to the time of implementing the cube) we must check marker update so that the marker should not be updated (because of these historical movements, only the stock balance / opening stock quantity has been updated; i.e. we have already loaded the present stock and the aggreagation of previous/historical data accumulates to the present data).
2) After every successful delta load, we should not check marker update (we should allow to update marker) so that the changes in the stock quantity should be updated in the marker value. The marker will be updated to those records which are compressed. The marker will not be updated to those uncompressed requests. Hence for every delta load request, the request should be compressed.
Check or uncheck the Marker Option:
Compress the request with stock marker => uncheck the marker update option.
Compress the loads without the stock maker => check the marker update option.
Relevant FAQs:
1) The marker isn't relevant when no data is transferred (e.g. during an delta init without data transfer).
2) The marker update is just like a check point (it will give the snapshot of the stock on a particular date when it is updated).
Reference information:
Note 643687 Compressing non-cumulative InfoCubes (BW-BCT-MM-BW)
Note 834829 Compression of BW InfoCubes without update of markers (BW-BEX-OT-DBIF-CON)
Note 745788 Non-cumulative mgmnt in BW: Verifying and correcting data (BW-BCT-MM-BW)
Note 586163 Composite Note on SAP R/3 Inventory Management in SAP BW (BW-BCT-MM-IM)
Thanks and regards

Selective Deletion on Inventory Cube 0IC_C03 via Calendar Day

Hello Group
I am trying to do a selective delete to our inventory cube 0IC_C03 and found there is not an option to select day.
Does anyone have any thoughts on how do delete using day? Please note that my cube has been compressed and I do not have a request in the cube.
Thanks
Frank

Hi Frank,
REPORT ZRSDRD_SEL_DELETION                     .
DATA:
    l_thx_sel   TYPE rsdrd_thx_sel,
    l_sx_sel    TYPE LINE OF rsdrd_thx_sel,
    l_s_range   LIKE rsdrd_s_range,
    l_t_range   TYPE rsdrd_t_range,
    l_t_msg     TYPE rs_t_msg.
******************* 0CALDAY *****************
l_s_range-sign   = 'I'.
l_s_range-option = 'EQ'.
l_s_range-low    = '20030308'.
*l_s_range-high   = .
l_s_range-keyfl = 'X'.
APPEND l_s_range TO l_t_range.
l_sx_sel-iobjnm   = '0CALDAY'.
l_sx_sel-t_range = l_t_range[].
INSERT l_sx_sel INTO TABLE l_thx_sel.
CLEAR l_s_range.
REFRESH l_t_range.
************** 0PLANT **********************
l_s_range-sign   = 'I'.
l_s_range-option = 'EQ'.
l_s_range-low    = 'PLNT'.
*l_s_range-high   = .
l_s_range-keyfl = 'X'.
APPEND l_s_range TO l_t_range.
l_sx_sel-iobjnm   = '0PLANT'.
l_sx_sel-t_range = l_t_range[].
INSERT l_sx_sel INTO TABLE l_thx_sel.
CLEAR l_s_range.
REFRESH l_t_range.
************** 0MATERIAL ****************
l_s_range-sign   = 'I'.
l_s_range-option = 'EQ'.
l_s_range-low    = 'MATERIAL'.
*l_s_range-high   = .
l_s_range-keyfl = 'X'.
APPEND l_s_range TO l_t_range.
l_sx_sel-iobjnm   = '0MATERIAL'.
l_sx_sel-t_range = l_t_range[].
INSERT l_sx_sel INTO TABLE l_thx_sel.
CLEAR l_s_range.
REFRESH l_t_range.
CALL FUNCTION 'RSDRD_SEL_DELETION'
     EXPORTING
          I_DATATARGET      = 'ZICRT_C37'
          I_THX_SEL         = L_THX_SEL
          I_AUTHORITY_CHECK = 'X'
          I_THRESHOLD       = '1.0000E-01'
          I_MODE            = 'C'
          I_NO_LOGGING      = ''
          I_PARALLEL_DEGREE = 1
          I_NO_COMMIT       = ''
     CHANGING
          C_T_MSG             = L_T_MSG.

Customization of Inventory Cube - 0IC_C03

Hi gurus,
I need to implement the Inventory for my client using the Std cube 0IC_C03.
Here the client wants me to take the Total stock as the sum of the following stocks in MARD Table
LABST - Unrestricted
UMLME - Stock in Transfer
EINME - Restricted Use
SPEME - Blocked
RETME - Return
In the Standard Content we are considering only Stock in transfer & Blocked stock.
Please help me in suggesting what are the changes needed in Transformations for both 2LIS_03_BX and 2LIS_03_BF.
Thanks in Advance
Seshu

Hi ,
The fields LABST - Unrestricted
UMLME - Stock in Transfer
EINME - Restricted Use
SPEME - Blocked
RETME - Return
The fields other than blocked and Stock in transfer are not present in the datasources 2LIS_03_BX and 2LIS_03_BF .
If you need these fileds , you can go ahead with a function module datasource based on MARD , MSEG tables from where you can take these fields directly .
You can also refer to the links below for other options
Datasource for MARD table
Re: MARD Table - Not giving Stock in Transit Value
If in case the relevant fields are not seen in the datasource , you can go to transaction LBWE, CLICK ON 03 :Inventory Controlling(your case), click on maintainence tab and just drag the required fields to the left .
Also you need to delete and fill the setup tables after this step.

Inventory Management Extractors via DSO to Cube 0IC_C03

Dear experts,
to fulfill the requirements of DataWarehouse spirit using Entry-, Harmonization- and Reporting-Layer I want to use for Inventory Management a Data Flow from extractors 2LIS_03_BX, 2LIS_03_BF and 2LIS_03_UM via DSO/DSOs and later on to Cube 0IC_C03.
In this forum there are some opened threads about this issue, but none has been resolved! Many hints are about the "How to Inventory Management..." - some other say: "You can use DSO's!" - others say: "Don't use DSOs!". So: Where is the truth? Is there anybody who can provide a really praticable way to implement the above mentioned data flow?
I'm so excited about your suggestions and answers.
Thanks in advance and regards
Patrick
--> Data Flow has to be in BW 7.0

Hi Patrick,
Yes indeed there is.
Using DSOs in inventory flow is absolutely possible. Here's what you need to know and do:
1 - Firstly don't be apprehensive about it. Knowledge is power! We know that inventory uses ABR delta update methodology and that is supported by DSOs so no doubt abt it.
2 - Secondly Inventory is special because of non-cumulative and several rule group at cube level for BX and BF.
3 - Now as you want to use a DSO and I am presuming that this will be used for staging purpose, use a write optimized DSO as the first layer. While mapping from DS to this DSO, keep one to one mapping from field to Info-objects.
4- Keep in mind that from Infosource to 0IC_C03 there would be multiple rule groups present in transformations.
These rule groups will have different KPIs mapped with routines. The purpose is that from ECC only 1 field for quantity (BWMNG) and one field for value (BWGEO) is coming but from Infosource to 0IC_C03 the same fields in different rule groups are mapped to different KPIs (Stock in transit, vendor consignment, valuated stock etc) based on stock category, stock type and BW transaction keys.
5- So create a write optimized DSO. map it one to one from datasource fields. create/copy transformations from this DSO to cube maintaining the same rule groups and same logic.
6- you can also use standard DSO and create rule groups and logic at DSO level and then do one to one from DSO to Cube.
Keep in mind that these rule groups and logic in them should be precisely the same as in standard flow.
This should work.
Debanshu

Valuation class in Inventory cube 0IC_C03

I have to include valuation Class in standard cube 0IC_C03.Please help me with your inputs.
what are the keyfigures I should assign in the update rule for valuation class chracteristics?.
Thanks in advance for your time and help
null

Hi,
hope that you already included the valuation class object in the Infocube and communication ( source structure ), the it should assign automatically. if not please go to the update rule and assign to the key figure which are not active using charateristics tab in the update rule. suggestion is assign for all the Key figures and then activate the update rule.
Regards,
Vishwanath.

Inventory Cube 0IC_C03

How do we compare the date BW with R/3 for the cube 0IC_C03?

Hi Krish,
Check this link to get document
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14
Regards
Prakash

Reloading Historical Data into Cube: 0IC_C03...

Dear All,
I'm working on SAP BW 7.3 and I have five years of historical data being loaded into InfoCube: 0IC_C03 (Material Stocks/Movements (as of 3.0B)) and the deltas are also scheduled (DataSources: 2LIS_03_BF & 2LIS_03_UM) for the InfoCube. I have new business requirement to reload the entire historical data into InfoCube with addition of "Fiscal Quarter" and I do not have a DSO in the data flow. I know its a bit tricky InfoCube (Inventory Management) to work on and reloading the entire historical data can be challenging.
1. How to approach this task, what steps should I take?
2. Drop/Delete entire data from InfoCube and then delete Setup Tables and refill these and then run "Repair Full Load", is this they way?
3. What key points should I keep in mind, as different BO reports are already running and using this InfoCube?
4. Should I run "Repair Full Load" requests for all DataSources( 2LIS_03_BX &2LIS_03_BF & 2LIS_03_UM) ?
I will appreciate any input.
Many thanks!
Tariq Ashraf

Hi Tariq,
Unfortunately, you will need some downtime to execute a stock initialization in a live production system. Otherwise you cannot guarantee the data integrity. There are however certainly ways to minimize it. Please see SAP Note 753654 - How can downtime be reduced for setup table update. You can dramatically reduce the downtime to distinguish between closed and open periods. The closed periods can be updated retrospectively.
To make it more concrete, you could consider e.g. the periods prior to 2014 as "closed". You can then do the initialization starting from January 1, 2014. This will save you a lot of downtime. Closed periods can be uploaded retrospectively and do not require downtime.
Re. the marker update,please have a look at the document Re-initialization of the Material Stocks/Movements cube (0IC_C03) with 2LIS_03_BF, 2LIS_03_BX and 2LIS_03_UM in BW 7.x, step 10, 11, 12 and 13 contain important information.
Re. the steps, it looks OK for me but please double check with the document Re-initialization of the Material Stocks/Movements cube (0IC_C03) with 2LIS_03_BF, 2LIS_03_BX and 2LIS_03_UM in BW 7.x.
Please have a look at the following document for more background information around inventory management scenarios:
How to Handle Inventory Management Scenarios in BW (NW2004)
Last but not least, you might want to have a look at the following SAP Notes:
SAP Note 436393 - Performance improvement for filling the setup tables;
SAP Note 602260 - Procedure for reconstructing data for BW.
Best regards,
Sander

Movement Type in Inventory Management Cube

Hello Guys,
I am new to the area of Invenotry Management. I have seen the How to Guide and blogs by Surendra for Inventory Management scenarios.
One of initial doubt is that the cube 0IC_C03 does not have Movement Type. As per the blog, we can define transaction keys in BW but how do I pull it in my Cube. Is ehnacing the extract strcuture BF the only option? If yes, what logic do we follow to add movement type to BF?
Also as per SAP Note, we cannot enhance BX to include movement type. So would it create a problem if BX does not have a movement type and BF has?
Looking forward to solutions
Thanks n Regards,
Abhishek

Dear John
The movement type has important control functions in Inventory Management.
For example, the movement type plays an important role in
=> updating of quantity fields
=> updating of stock and consumption accounts
=> determining which fields are displayed during entry of a document in the system
thanks
G. Lakshmipathi

Cubes on the Materials management Cube 0IC_C03

HI,
We need to create cubes on the Materials management Cube 0IC_C03 to take care of the huge inventory data we have . These will be a copy of 0IC_C03 and 0IC_C03 will be a staging layer.
Want to know how will the marker update will work on the new cubes?
Thanks.
Nitin

Hi,
Look this link wll give u full detailes about marker updats and so on....
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
***********Asign Points if usefull*******
Cheers,
Satya

Inventory analysis Cube 0IC_C03

Similar Messages

Maybe you are looking for