Provident fund configuration for coal project

Dear all
my requirement is to maintain pf rates for our coal mines.we have already maintained pf rates for our organization i.e plant .but now we have created new pf id for coal project.and we have different calculations for coal project employees whom we have assigned new pf id.
ex:empcode 102184
    pa30->infotype->587->Provident Fund Trust ID (Now its RCMP) from macrh 01.2014
    pa30->infotype->587->Provident Fund Number (New pf code number)   ex-YZZZZ
before this we have
   pa30->infotype->587->Provident Fund Trust ID (Now its RPCL) from macrh 01.2014
    pa30->infotype->587->Provident Fund Number   (old different pf code number) ex- XTRYY
A/C Number
Emp Name
EMP CODE
S/W
salary
PF CONTRIBUTION (12%)
PENSION CONTRIBUTION
VOL. CONTRIBUTION (2%)
TOTAL ADDI. PENSION CONTRIBUTION (ONE INCREMENT DIVIDED BY 12 MONTHS )
ADMIN. CHARGES (3%)
Employee (10.84%)
Employer (10.84%)
Employee (1.16%)
Employer (1.16 %)
CMPF/123/456
XYZZZZZ
1102184
173,830
18843
18843
2016
2016
3477
2188
1252
how can i configure these in my system.
we have already differnt calcualtion for RPFC emp of our company.
please guide .
thnxs
gaurav

i have done it with separate trust id-RCMP.but i have assigned same wage type as i did for older one.(RPFC case).should i need to create new wage type and create PCR for separate pf trust id.
trust master details:pleas tell me .what to do for this issue and how it can be resolved.
RCMP
CMPF
RPFC (Regional Provident Fund Commsioner)
/3F1
/3F2
/3F3
/3F4
/3F7
/3F8
/3F9
RPFC
RPFC Govt
RPFC (Regional Provident Fund Commsioner)
/3F1
/3F2
/3F3
/3F4
/3F7
/3F8
/3F9

Similar Messages

Unable to click 'Set and save as my Active Configuration for this project'

Environment: OWB 11.1.0.6 Client running on Windows XP Pro SP3 repository and targets on AIX (IBM UNIX).
I have created a new Configuration under a specific Project and I'd like to make this configuration the default whenever I login and select this Project.
There is a check box when I right click the Configuration and select 'Open Editor' that says 'Set and save as my Active Configuration for this project' but when I select the check box and try to click on 'OK' there is no response from the popup window and I have to click 'Cancel' to get out of the popup.
Any ideas on why this is happening and how to get around it??
Thanks very much.
-gary

Si
Good catch!! Restarting the app???? What a waste of time!! :-(
When I went back in the box was already checked! It must have known I was pissed at it!! :-)
Thanks for the help.
-gary

Inventory management configuration for Rollout project.

Hi all,
We have created new plant using Copy function (using reference Plant).
Kindly let me know
what are other configuration required for Inventory management in new plant?
Please provide if any check list available for Roll-out project.
Thanks
SAP-PQ

Hi
1) If your plant is excise then you have to create excise group for that plant and G/L setting for that excise group
2) You have to extend your material in new plant
3) check your material type update for quantity and value update for your new plant in t-code OMS2
and check following link
[Rollout project;
Regards
Kailas Ugale

Workflow configuration for employee rejection

HI all,
Employee getting rejected the time sheet by this manager and message will sit in his SAP BUSINESS WORKPLACE.I want message to be stored in employees' own account than SAP BUSINESS WORKPLACE.please provide the configuration for that
Thanks
Amar

Pulled by Bertrand ...
I suggest you to check the online help linked to the customizing point SRM -->SRM Server --> Cross application basis settings --> Sap business Workflow --> Perform task specific customizing. This documentation is pretty well done and explain all about standard workflow in SRM.
Rgds,
Pierre

CIP Cost for the Project

I want to write a query so that i can identify the CIP Cost related to the Projects.
Can any one help me in this ?

There is an already existing view PA_CAPITAL_PROJECTS_V , which provides summary information for a project. You can use that as a starting point.
Thanks,
Ram

Annual Provident Fund not coming as per projection.

Hi,
Annual provident fund is not calculated as per projection basis (Nominal Basis) whenever employee getting LWP.
present calculation in the month of April : Actual Basic = 9000
Basic(after 1 day LWP) 12% : 870012%= 1044-00
Projection : current month PF + current month11 months= 1044+104411 =12528
But it should be the current month PF + 12% on actual basic * remaining months: 1044+1080*11= 13012
Please suggest me to resolve this issue.
Thanks & regards,
vv.

hi,
thanks for your reply. /3f6 is coming as explained above. But in another client (sand box) it is coming fine as per projection basis.
it should be the 12% of annual Basic amount. But annual basic is coming ok.
Thanks & regards,
VV

Table - T7INF3 (Statutory Rates for Provident Fund)

Hi,
     In this Table we can see the following Fields
     1. Employee Contribution - 12.00
     2. Employer Contribution - 12.00
     3. Employer Pension Contribution - 8.33
     4. Provident Fund Administration Charges - 1.10
     5. EDLI Contribution - 0.50
     6. EDLI Administration Charges - 0.01
     7. PF Intrest - 12.00
Above specified all Fields applicable for IT Company or not ? Is It There any Changes In the Above Percentages?
What is EDLI ? What is the use of this ?
bye
phanikumar

Hi Phani
Refer this link to get all the info
http://www.epfindia.com/
Reward points if helpful
~BiSu

How to configure for the give senario where we from APO demand planning, we provide baseline forecast into TPM

Hello Guru's,
Request for information on smart documentation on the integration between Trade Promotion Management and SCM-Demand Planning from an architecture perspective how to configure for the give senario where we from APO demand planning, we provide baseline forecast into TPM and from TPM promotions values can be considered in to APO demand planning: can anybody give me some insight on it.
Thanks in advance.
Kumar

Hi Praveen
There are several ways you can connect a DP system to a TPM. How are your interfaces and systems setup?
Option1:
Extract the baseline from APO to a BW cube, extract the data out of BW, may be using infospokes/open hub and pass it on to TPM.
2. Have a custom program written in APO-DP to extract the selected keyfigure data at the aggregation level into an interface or a .txt file into APO directory and use some data transfer service such as EDI to take this data and send to TPM.
In my experience it is simple to define an integration process. The much larger and complicated aspects are the date adjustments and the aggregation levels.
Date adjustments:
Understand the basis of the data in APO and TPM. APO is usually at the requested delivery date or material availability date ( when the customer like a store wants the product). However TPMs are usually at the consumption date ( when an end customer like you and me but from store shelf). Depending on the product and business style this can mean several days difference. Let's say it is 25 days on average, you need to add 25 days to APO base line date to get the TPM consumption date.
Aggregation level:
This can be product or customer. If the planning in DP is at product sku level and the TPM is at packs or brand level, you need to aggregate the data up before loading to TPM. The same with customer.
To me the most complex part of the integration is to understand and transform the data in a meaningful way and a strategy to sustain this integration by keeping both DP and TPM in sync in terms of master data. Also important to have a process for identifying exceptions and failures. you send baseline from DP to TPM and if it fails, how do you know? how do you trouble shoot?
Hope these help.

How to configure evaluations at level task only for released projects?

Hi,
Does anyone know how to configure evaluations at level task only for released projects?
What we need is that the evaluation will be executed only when project has released status. Is that possible?
Thanks a lot,
CAMILO URIBE

Hi CAMILO,
After the notes 1422722 & 1465106 is a service method available, which allow the customer to dis-able the evaluation.
CL_EVE_EXTRACT_FACTORY SET_ACTIVE
You can put a codes in some BADI method, which is called during save. Within the Badi-Implementation, call the SET_ACTIVE method, so that the evaluation not be tiggered (until the project get released.)
KInd regards,
Zhenbo

OLE DB provider 'MSOLAP' cannot be used for distributed queries because the provider is configured to run in single-threaded

Hopefully this will save somebody some trouble.
Running 64bit Enterprise SQL and SSAS with Service pack 2 installed.
Also running Proclarity so 32bit mode Reporting Services is running.
When trying to create a linked server to my OLAP database I was continually getting the following Error:
OLE DB provider 'MSOLAP' cannot be used for distributed queries because the provider is configured to run in single-threaded apartment mode. (Microsoft SQL Server, Error: 7308)
Many posts suggested I select the "in Proc" check box under the olap provider, but this did not help.
Finally, instead of using the IDE to create the linked server I used a script to call sp_addlinkedserver and used @provider='MSOLAP.3'. This fixed the problem.
If you have a more clear idea of why I was having the issue in the first place, feel free to let me know what you think.

Try this thread:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/f02a3921-7d0b-4038-97bb-9f17d381b345/linked-ssas-server-fails?forum=sqlanalysisservices
Talk to me now on

Campaign - Need to provide 2 different View Configurations for same Role

Hello,
I need to provide for the same role config key 2 different view configurations for campaigns. Initially I wanted to do that with transaction types, but then I found out that there are no transaction types for campaigns.
Does anyone know a way to do that? I don'T want to use a BADI for it, best would be a standard way.
Thanks!

You use Object Types to distinguish between views of same RoleConfigKey. In SPRO 'UI Framework Definition', you create object types and they would be available when you create a view config. Just select the object type as it forms part of the 'key' that idenitifies that particular view. In DO_CONFIG_DETERMINATION method of that view, you call a config based on this Object Type. So same view can produce two or more configs for same user in different scenarios.

Project Analytics - PA - Configurations for Oracle Apps 7.9.6

Guys - I have gone through the docs and cannot find what configuration steps are necessary for us to run OBAW / DAC loads for PA (Project Accounting / Project Analytics).
Any pointers are greatly appreciated.
Regards,

Here are the main steps:
Install OBIEE
Install OBIA (e.g. 7.9.6) use Project analytics option while install
Create Target Database ( e.g. 10.2.x or 11g)
Install Informatica (e.g. 8.6, SP4)
Client
Server (Server / Repository)
Integration Service and Repository Service
Install DAC (e.g. 10g)
Install DAC client
Install DAC Server
Restore Informatica Repository
Restore DAC Repository
Register Informatica Repository services with DAC
Connect DAC to DW
Create Custom Container in Informatica for ETL loads

How to configure Https in Project server 2010.

HI,
Can i any one help me,
How to configure Https in Project server 2010.
My server farm is 1.Test1(App & Wfe) 2. Test2(App & Wfe)
Both are load balanced wit NLB as abc.hyd.in
DO i need to Install certificate in two servers Test1 & Test2 or one server is enough ?
Can any one please provide me a link to configure Https for project server 2010 for Two Farms Servers.
Thank You, Kumar KSV

There is no special configuration for Project Server to have the IIS enabled, it follows the typical sharepoint SSL enablement, we might need some mor edetails on how your NLB is done is it hardware based, software based ? it all depends how you want
to architecht the system, you can enable the Https either on NLB or WFE, again depending upon how you want to enable it, you will need to install the certificates on both WFE or on NLB
Follow the blog below to configure the SSL:
http://epmxperts.wordpress.com/2011/03/05/extend-same-project-web-app-instance-for-different-protocol-authentication-mechanism/
http://blogs.msdn.com/b/sowmyancs/archive/2010/02/12/how-to-enable-ssl-on-a-sharepoint-web-application.aspx
http://www.sharepointconfig.com/2010/03/configuring-a-sharepoint-website-to-allow-ssl-connections/
Thanks | epmXperts | http://epmxperts.wordpress.com

Suggestions Request for Proposed Project

I'm after suggestions for the best way to implement a project I'm planning. I download bank statement details as .CSV files which include date, amount and description details per transaction. I want to be able to produce time period (eg, year and month) reports on transaction amounts by category, where a category is identified by the description field of the TX. For example, if a TX description field includes the string "BP", "SHELL" or "CALTEX", the category would be "FUEL". The object of this exercise is to be able to report expendature by category. There will be thousands of TX's, but only a small number of categories, say, 20.
From my research to date, it looks like Oracle OLAP (because of the flexibility of it's cube and dimension constructs) might be the tool to use for this project, but I can't find introductory examples on using OLAP for this purpose. I have Oracle 11g server and client installations on a couple of Linux Fedora 10 boxes, and a server database with the OLAP component installed. From my client, I can start Oracle 11g Analytic Workspace Manager and add my server database to the tree. SQL Developer is also configured to connect to my server database. I also have a bunch of python modules which I have written to load TX data from downloaded .CSV files into server database tables.
Can anyone assist an Oracle developer newbie (with many years of Oracle DBA experience) with suggestions on the way forward, or pointers to doco that will assist me? Is OLAP/AWM the appropriate tool for this project, or is some other approach going to be simpler?
TIA,
Jon

It sounds like your data is dimensional, has hierarchies and you have the need for aggregate level analysis and time series calculations. If so, the OLAP Option is probably a good choice. A few thoughts for you:
- Data is loaded into a cube from tables or views (you will need to load data from the csv files into tables. It soulds like you will need at least two dimension tables (category and time) and a fact table. (If aren't familar with dimension and fact tables, Google 'dimension table', 'fact table' and 'star schema'. You will find plenty of information.)
- If you are only analyzing data at the category level, don't bother to load TX detail into the cube. You can aggregate data in a view or you can map the cube to the source tables in such a way that the cube will aggregate while it's loading from the fact table.
- Analytic Workspace Manager (AWM) is the correct tool for designing and managing cubes.
- There are lots of examples and tutorials on the OLAP Option OTN page. http://www.oracle.com/technology/products/bi/olap/index.html . You might want to start with the overview and creating cubes videos.
- You don't mention what you are going to use for a query tool. Excel 2007 with the Simba MDX provider is a good choice. (There is a video on the OTN page about using Excel with the cube. See http://www.simba.com/MDX-Provider-for-Oracle-OLAP.htm for information about the MDX provider.) If you happen to be using Oracle Business Intelligence Enterprise Edition, be sure to get the OBIEE Plug-in for AWM. It's on the OLAP OTN page.
Good luck!

Change Management Configuration for SolMan 4.0 SP13

Hi SolMan Experts,
Recently, we have build SolMan4.0. As of now, we have configured this for System monitoring and EWA reports.
Now, we are planning to configure for Change Management.
Could you please provide me the useful documents for CHANGE MANAGEMENT configuration on SolMan4.0.
Thanks in advance!
Regards,
Hari.

Hello
Follow the same steps which mentioned for SP12, as per my understanding there is not much difference in basic configuration of solution manager 4.0.
Create systems in SMSY, RFC connections, create logical system, create project, activate charm, these are the basic steps.
You will get information on this on saphelp and also go through the solman rkt (service.sap.com/rkt),
sap market place  sap support infrastructure  solution manager  media library (u will find all documents)
Even they gave given the charm configuration guide for SP12, u will find that in technical papers.
Hope this will help
Regards,
Sharmishtha

Provident fund configuration for coal project

Similar Messages

Maybe you are looking for