Inventory Value Not Tallying with R/3 MB5B Report

Hi,
We are tallying data of BW Query Inventory Valuated Stock Value (0VALSTCKVAL) with R/3 Valuated Stock Value using MB5B.
i)      Data is tallying for all plants except one plant, this is having project stock.
ii)     For this we have analysed data for one material , we found some valuated stock (With Negative Sign) on 19.04.2006 to   09.03.2008.But this is not showing R/3 anywhere.
iii)     In the Cube also there is no data on 19.04.2006 to 09.03.2008 for this plant & material
Please guide us from where it is appearing in the BW Query.
Thanks,
Kiran Manyam

Hi
See the steps
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
Thanks
Reddy

Similar Messages

AR01 REPORT IS NOT TALLYING WITH GL BALANCE

Dear SAP Guru's
AR01 report is not tallying with CWIP gl. during our observation, we found that out of four CWIP assets two of them showing over balance and two of them showing under balance. but when i tried for settling these assets to actual assets, system shows no value for settlement. But when i try for Scrapping, system is allowing for scrapping from these CWIP assets. In General, when ever value is lying in the CWIP, system will allow for settlement, but why in these case it is not allowing. What could be the reason ..for .CWIP assets shows Under/Over value.
Please advice.
regds

Dear Ravi..
Thanks for your early reply...
01. As per the Program documentation, it shows that these report should be executed only before year end closing.
Is there any effect if i execute now.
02. For Your information, i know the exact difference of balance which both AR01 and CWIP GL shows, so to what extent this program ABST2)will help.
03.It would be helpful to me if you have any solution to resolve it.
04. Actually this problem was existing from more than 3 fiscal years...our auditors did not recognize it..now management recognised and want to rectify. If i reverse any entries it will effect previous Statutory reports, so without effecting the previous statements i have resolve it.
Regds,

Accumulated depreciation in FA not tally with GL account

Hi Expert,
We have a issue for the Accumulated depreciation in FA not tally with GL account. The amount for the accumulated depreciation in the GL initially uploaded (amount not correct difference by 1cents) is not tally with fixed asset module. We unable to adjust the amount due to the accumulated depreciation GL account is set to "Recon. account for acct type- A Asset". Standard SAP is not allowed us to change the error message to warning message.
Any idea how to settle this issue?

Hi Janet,
Use the transaction ABF1 PK 70 and 75 fill in the g/l account from the asset and TType 100. Don't fill in asset number.
Give only for this case authorization for ABF1 when the values are ok take away this authorization

How to fix the issue Total CN amount show in FSCM not tally with total CN amount in GSAP?

Hi ,
How to fix the issue that is Tolat CN amount show in FSCM not tallying with Total CN amount in GSAP?
Can somepone reply for this asap ?

Hi Janet,
Use the transaction ABF1 PK 70 and 75 fill in the g/l account from the asset and TType 100. Don't fill in asset number.
Give only for this case authorization for ABF1 when the values are ok take away this authorization

Reg:F.19 report figures are not tallying with gl account 208030. Why?

hi boss
F.19 report figures are not tallying with gl account 208030. Why?
pls urgent
amk

Hi,
We have had GO-LIVE on 2008 April. They have executed balances carry forwrad for 2008 only. Do they need to carry forward balances for 2007 also?
Is this the reason, that the system is showing differances in F.08 report.
Kindly help me
Thanks
Kishore
Edited by: Emergys Corp on Nov 24, 2009 8:56 AM

Assets balance Report(T Cd s_alr_87011964) Not Tally with GL Code in FBL3N

Hi Friends
SAP Standard Assets balance Report(T Code s_alr_87011964 and s_alr_87011963 ) Not Tally with GL Code in FBL3N.
In SAP report coming with Report Date but FBL3N coming with Posting Date
So How I add Posting Date input parameter in Sap Standard Report. Please help me
Thanks & Regards,
Hemant Kumar

Hi Vinod,
I hoe that you are doing reconcilation between Asset ledger & FI ledgers. Before that just run ABST ,there u can findout whatever the documents not assigned to FI.
Asset is subledger to GL.It is automatically updated through determination,while post GRN to capital goods.In somecases bsuiness remove the reconcilation acount and do some adjustments that time that report not match with FBL3N.
You can run ABST then u can get details
Best rgds
Mani

Currency conversion - Line item total does not tally with account balance

hi guys!
we are currently going through currency conversion in Zimbabwe and we are at preparation stage. i have got 3 issues:
1. while trying to run program RFSEPA02 the following error is appearing-
   -Line item total does not tally with account balance
2. i might need to retrieve some FI documents whic were archived. how do i retrieve archived documents
3. i might also be required to delete(if its an option) some records so tha line item total will tally with account balance

put a break-point @
if t_balance_items_hw[] <> t_balance_account_hw[] or
     t_balance_items_tw[] <> t_balance_account_tw[].
    perform dequeue_account.
    message e099.
*   Summe der Einzelposten stimmt nicht mit Kontensaldo überein. ->
endif.
endform.                               " CHECK_ACCOUNT_BALANCE_2
and debug y it is getting the error.
Short text
Switch On Open Item Management by Changing Master Record
Description
This program activates open item (OI) management for a G/L account and makes the necessary changes to documents already posted. These are then displayed afterwards as open items. It does not process the open items any further. In reversed documents especially, it does not reenter clearing data in the document.
Requirements
No items can already be archived from this account.
Caution: Company policy must be in place to ensure that this does not happen.
Some G/L accounts cannot be managed on an open item basis, especially G/L accounts that are used in account determination for automatic transactions (for example, accounts set up for transactions MVA or VVA, or accounts which are posted to using posting keys set up for account type M).
Caution: Before making any changes, check that the G/L account can really be managed on an open item basis. If necessary, contact your SAP consultant.
The account must be blocked from posting since any new documents posted at the same time as converting documents and postings for this account would not be entered.
Output
When using the list log, each document that was changed is listed. In addition, the total of the changed BSIS/BSAS entries and the total of the changed documents is listed.
Regards
Prabhu
Message was edited by: Prabhu Peram

Inventory data not matching with R/3

Hi,
In R/3 production we have the data from 1999-Till date.From 1999-2004 Data was archieved in R/3 system.So we have two years live data in the R/3 production.
We have filled the setup tables and extracted the Inventory data then loaded into 0IC_C03 Cube.
But the values in BW report from 0IC_C03 is not matching with the values in R/3 report.
1.What could be the reason?
2.If we need to extract the archieved data from R/3 what are the steps we need to do?.
Pls help us with your suggestions.

We have followed as per the How to handle inventory managment document.
The quanity value is matching between R/3 and BW.But the Valuated Stock Value is not matching for some of the materials.For the current period it showing the right value(for ex.if we check for 12th Month).
But If we check the material for old months like October,Aug the value of valuated stock value is not matching with R/3 for some of the materials.
In RSDV validity table date maintained from 1999-Dec'200.
We are using the standard business content cubes and update rules.Is there any change needs to be done in update rules for 0IC_C03 cube to get the right values for all the materials?..
Pls help with your inputs.
Thanks
Soujanya

Drill down value not matching with Displayed Report Painter Issue-GR55

Hi,
Need your help for an issue in drill down value of report painter from actual cost coloumn.
I have created a new report group based on OSS Note-157720 in GR55 Traction. This new report group will provide data of Planed / Actual cost, Planned / Actual Quantity of the project in range of fiscal year/periods. The issue in this report is displayed data of actual cost is not matching with drill down data. The actual cost coloumn is formula coloumn which framed by subtracting All periods cost coloumn, Before Periods Cost Coloumn and After periods cost coloumn.
Could you suggest on this issue.
Thank you for your cooperation.
Regards,
Rakesh

The report you are running first might have been created with some hidden columns that contain more than one variables relating to period and fiscal year. These may not be matching those that are required to run the drilldown. Look into the definition of the drilldown report. If you would want to match the first report, It may be better to identify which report runs on drilldown and the run that report with the required parameters.

Utilization values not matching with g/l accounts

Hi Mentors
while I am doing the utilization (J2IUN) FOR the month april my utilization balances not matching with g/l accounts. till the march my balances is tallying.
why i am not tallying in april. please suggest me.
thanks in advance
Laxman

During utilization, the GL balances are read and shown. Hence there should not be any discrepancy. However, please check the GL transactions for the month of April to find out if any non excise posting (a financial JV, for example) has been entered.
Regards,
Aroop

FAGLB03 peroid balance not tallying with line items within

Hi,
When i go to FAGLB03 and tally the balance of a recon account for a particular month with the line items in it, it does not tally
This is happening for one period within the fiscal year, others period balance tally with the line items
What can be the solution for this?
Regards,
Parin

Hi Parin,
You did not confirm still whether the account in FAGLF03 is the same account that you are trying to view.
This issue will require careful analysis in the system as there could be more than one reasons.One of the likely possibilities is missing BSIS line items. As it is a technical reconciliation issue, please create a message for processing.
FBL3N report that you executed also points towards that. I hope that you ran the report for all items posted in that period.
If you ran it only for open items, then there is also a possibility of a possible clearing issue.
Anyway , the best route will be to open a message in FI inconsistencies component and let SAP investigate further.,
Best Regards,
Shrikant

MM not tally with FI

when i print report MB5S to compare with FBL3N base on a clearing account, I found you both report not tally. This is become user may key in the vendor invoice directly to through FB60 without go thorugh the MM module. How to rectify this error so that both will be tally?

MB5S -- is only for MM transactions...where you can tally the GR & IR details.
Comparing with FBL3N with MB5S is possible only the documents posted thru MM .You can chekc the document type ; RE , RP , RL.
Documents posted using the document type:KR, KG can't chekc against the MB5S......
While executing the FBL3N exclude the Document types KR, KG, SA.
VVR

Central Inventory was not created with rapid Install Version 12.1.1.9

Hi,
I have installed a new R12.1.1 E-Business environment on HP-UX Itanium-64 bit., by following the below note,
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for HP-UX Itanium [ID 762891.1]
Everything was running fine without any issues...
But for the database "opatch lsinventory" is giving the error : OPatch cannot find a valid oraInst.loc file to locate Central Inventory.
I have noticed the Central Inventory is not created under /var/opt/oracle..
I did a mistake by not verifying the Latest Rapid Install version as mentioned in the above Doc under "Before Installing or Upgrading" section..
The latest is version : 12.1.1.11 and mine was : Version 12.1.1.9..
Is there a way to overcome this issue by manually creating the central inventory , I need to apply few database patches...
Thanks,
Chan.

Thanks Hussein.
The note has mentioned about registering RDBMS Oracle_home by using -atachhome option(2nd Procedure),do we need to do this for the rest of the Oracle Homes too,like Web Home and Tools Home..?
We have a typical two node install with CCM/Admin on the DB node..,No shared application tier.
Also is it fine to go with the second procedure from the Doc rather than the first one(Note that the first procedure also updates the Local Inventory, so is the recommended one when fixing Cloning or Install related issues.)
Please advice..
Thanks
Chan.

GL balance in FS10N not tally with KE5Z due to trx posted to FI but not CO

Hi,
Need help to solve this problem.
Some of our FI postings were not reflected in the Profit Center accounting therefore when we compare GL balances in FS10N against KE5Z, the figure does not tally.
Suspected when the transaction was posted, the cost element for the GL was not created yet.
ie GL account 123456 created in 01.10.2009, transaction posted in 06.10.2009, but the cost element for 123456 was only created on 12.10.2009. Therefore the transaction posted on 06.10.2009 only updates FI but not on the CO side. Not sure whether this is the actual reason or could be due to other reasons.
Is there any way to reverse/repost such that figures from the 2 tcodes tally? Thank you in advance.

Hi Azmin,
thanks for your reply, but I have actually tried using 1KE8 but I got an error log "Account xxx requires an assignment to a CO object". Therefore I wonder if there is any other tcode that I can use or should I perform certain step first before I can use 1KE8.

Sub: nbv in dep report is not tally with financial report

Hi Experts,
I am facing a problem that is when I see the balance in S_ALR_87012026 the end book balance is showing 100,642.60 but where as if I run s_alr_87012277 the balance is showing 100,681.23 which means the difference of 38.63 the difference which i found is in april after run the depreciation.
so if anybody face the same problem give me your inputs.
thanks in advance,
kk.

Hi,
execute the asset history sheet (RAGITT_ALV01) with the option "posted depreciation". Compare the result of this report with the G/L report.
Regards,
Markus

Inventory Value Not Tallying with R/3 MB5B Report

Similar Messages

Maybe you are looking for