Invoice is payment bolck with indctor 'R'
HI ALL,
I'm trying to post the invoice it is having price differnce .It have bolck payment indicator with "W"but last invocies are block indicator with 'R'
When 'R' is trigger and when 'w' is trigger
And how to block payment indictor with 'R'
Thanks
HAppy
Hi
Pl. go through
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a8/b99f58452b11d189430000e829fbbd/frameset.htm
Similar Messages
-
Vendor invoices are blocked automatically with payment blck A instead of R
There is an issue with a specific vendor.This vendor's invoices are blocked automatically with payment block A instead of
payment block R.
I know that invoices are blocked when posted if there is a price variance exceeding 3% and/or 100 Euro with payment block R.The invoices with payment block A are not included in the report Z1PE which is used by the Production Planning in order to monitor the blocked invoices and these invoices remain blocked for a long time until the vendor requests their payment.Could you please check why this happens?HI,
Discuss with your MM Consultant, in MM there is a facility to block the invoice automatically in certain scenarios.
Thanks & Regards,
Shashi Kanth. -
How to reconcile AR down payment Request with AR Invoice?
Dear All,
SAP B1 2007A SP01 PL07 version.
I have created one AR down payment Request with total amount 1000.00, and then post incoming payment to paid the AR down payment Request, and the AR downpayment request then closed.
Then, I add one AR Invoice with amount 1000.00.
After that, I want to add incoming payment , then I select both (AR downpayment request & AR invoice), but cannot add the incoming payment because the total amount is zero (1000.00 - 1000.00=0.00).
How can I solve this problem?
Thanks in advance for any help.Hi Kerstin,
Thank you for you reply.
I did test your solution, but its only work for SAP 8.8. But now i'm working in SAP 2007A version. For 2007A version, downpayment request cannot be drawn to invoice.
Anyway, i find out one way. If I add the payment together with another invoice, thats mean the total payment is not zero, then its work. The solution is, make sure the total payment is not zero then it should be ok.
Thanks to everybody for your fast reply. Thank you so much and really appreciate your help.
Regards,
Mat -
Down Payment Invoice & Incoming Payment docs print with Sales Order
Hi,
When print a Sales Order that has a Down Payment linked to it, the Down Payment Invoice & Incoming Payment also prints.
How do I turn this off?
Thanks,
RonHi Ron,
What is your B1 version and PL?
Thanks,
Gordon -
Custom invoice clearing & payment posting
Hi all,
we are not recieving BAI2 file for lockbox from bank but we have an external software which will identify SAP customer invoices & corresponding payment.
Now how can we post this payment as we do nor have BAI2 file. I think that some custom program will be required for cash posting & clearing but I am not sure how to create it.
Please help..
NikUsually you can reset or reset & reverse at a time.
But for some documents there will be forex gain/loss line items which will happen automatically when a open line document cleared with another document.
e.g. Line item 1 :- 500 Cr balance in a vendor account.
When you done the payment to this vendor through F-53, system also analyze the valuation differences if any and post.
so these are generated automatically
While reset this document you can't avoid reversing.
May this is the issue you are also facing.
you cant do anything for this. -
When printing an A/R Invoice, a print options box appears allowing you to select:
() Invoice Only
() Invoice and Payment in Succession
() A/R invoice +Payment
I select the last option and I get the A/R Invoice and a Payment Receipt. I am trying to edit the payment receipt which is system generated. It their away to edit this? I can edit the A/R Invoice with not problem, but I can not find the Payment Receipt to edit it.Thank you for your reply, but I was asking if their is away to edit to payment receipt? I know how to find, locate and edit the A/R Invoice templates, but I can not find the Payment Receipt that is generated along with the A/R Invoice.
-
Report for payment runs with multiple bank accounts
Hi everyone,
I'm looking for a report that displays the results of a payment run(or payment runs) & throws in some payables and cash information as well. The report should include the following information:
Supplier | Source document ID | Invoice ID | External Reference ID | Payment Run ID | Payment ID | 'Supplier Bank Account' that the payment was paid to | Payment Status (or potentially invoice status) | Payment Method
I've tried combining several data sources but can't seem to find the correct sources to join in order to get all these fields...Any help would be appreciated.
thanks,
-BenWhen you enter bank details in master, update field "Partner bank type" LFBK-BVTYP with free form value, may be currency is good choice.
During invoice entry, this field is available for update, update which bank to be used for payment of this invoice. You may build logic to populate this field, like substitution to populate currency in this field during invoice posting.
During payment, system checks value in field Partner bank type in invoice and selects corresponding bank.
Hope this helps. -
Require Vendor Payment List with Payment Terms
hi how to get Require Vendor Payment List with Payment Terms
hi
You can go to FBL1N, (i.e vendor line items) and click change layout button. in the change layout menu, you have "Terms of Payament" field which show the tems of payment you had in the invoice..
You can use "terms of payment" field to display payment terms in the vendor masster data.
hope this will help
award points if helpful
Edited by: venu mamillapalli on Jun 12, 2008 9:35 AM -
"Post Invoice and Payment seperately"
Hi Guys,
I need help on resolving this issue.
We are posting a vendor downpayment using F-48.
We are then doing a vendor invoice and subsequently clearing the open items using F-58. But we are getting the following error while posting
"Deferred Tax : Post Invoice and Payment seperately $1"
Thanks,
Srikanth.hi,
Do you have two tax codes setup up. One tax code to post with the invoice and another one which is used for transferring when the invoice payment is made. Please check that you are using the right tax code setup for the posting with the invoice.
Regards
Girish BP -
'Deferred tax: Post invoice and payment separately $1
Hi
A customer invoice is posted with service tax.If we go to f-04 to make
an entry of payment received and Debit bank, debit TDS certificate
receivable for the TDS amount deducted and click on process open items
thereby selecting the customer and then the invoice the system throws
the error as 'Deferred tax: Post invoice and payment separately $1
Message no. DEFTAX020'
And if we try to post it by selecting posting key of credit customer
which will not do the clearing of invoice, the error does not come.
We are using deferred tax transfer New : RFUMSV25.All the other
processes relating to service tax are going fine.
Please suggest.Hi
A customer invoice is posted with service tax.If we go to f-04 to make
an entry of payment received and Debit bank, debit TDS certificate
receivable for the TDS amount deducted and click on process open items
thereby selecting the customer and then the invoice the system throws
the error as 'Deferred tax: Post invoice and payment separately $1
Message no. DEFTAX020'
And if we try to post it by selecting posting key of credit customer
which will not do the clearing of invoice, the error does not come.
We are using deferred tax transfer New : RFUMSV25.All the other
processes relating to service tax are going fine.
Please suggest. -
Need to enter invoice and payment in the system after a manual check issued
Client Need to enter invoice and payment in the system after a manual check is issued for some urgent transactions.
Please suggest few ways to do this .Hi,
If client can maintain a separate check book sequence for manual issue, we can configure a separate payment document with the same sequence and later record the invoice and generate payment ....
Regards,
Ivruksha -
Regarding Invoice and Payment slip both needs to print sub sequently
Hi Guys,
i have problem with smartform ,
the requirement was ,
invoice and payment slip both i need to develop using smartforms,
the thing is invoice will print on white paper(Portrait) and
payment slip will print on pre - printed paper (landscape) ,
subsequently it needs to print one invoice and payment slip for that invoice and
another invoice and payment slip like this in the sequence it needs to print .
this would be done by overnight job scheduling ,
how could i do this ,
what about output types and how can i proceed with technically please guide me .
urgent requirement ..help me out this .
Thanks & Regards
Vijay Kumar Reddy
+91-9789098418
[email protected]Hi Dewang,
I have a different situation, I posted SD request at contract account level posted using FPSEC1.
Since the contract account is for purpose of Aggregation, I did a aggregated posting then when I prepare a print doc for the same using EA10_AGGRBILL it is not picking up the security deposit request.
I have maintained the necessary entry in Item Selection in Account Maintenance/ Define Sub-Items for RF clearing type.
Please advice.
Thanks
Satyajeet -
Payment block with a quantity reason when IR before GR
Hi,
Currently, system sets payment block with a quantity variance reason when IR before GR for standard PO items. But this payment bock does not working for a Service PO items.
In our system, we didn't maintain a talerance key DW as expained in the help below.
Can anyone help this out to set payment block with a quantity variance when IR before GR for a Service PO item?
DW: Quantity variance when GR quantity = zero
If a goods receipt is defined for an order item but none has as yet
been posted, the system multiplies the net order price by (quantity
invoiced + total quantity invoiced so far).
The system then compares the outcome with the absolute upper
tolerance limit defined.
If you have not maintained tolerance key DW for your company code,
the system blocks an invoice for which no goods receipt has been
posted yet. If you want to prevent this block, then set the
tolerance limits for your company code for tolerance key DW to Do
not check.Hi,
We are on ECC6. I'm not sure if the answer from Chris is a correct.
Anyone has used this fucntionality?
Hi,
There is a flag that can be maintained in table T165 Srv. IR before GR(SRV_IR_BEFORE_GR) that can be set to allow Invoice Receipts to be posted before GR's for service items. You will also need to set message SE 260 and 650 to warnings in customising or in view V_160M.
This will allow you to remove the GR based IV flag but will not allow invoices to be blocked, in order to do that you need to create an implementation for the BADI for the LIV release check.RegardsChris -
Deferred tax: Post invoice and payment separately $1" Message no. DEFTAX020
while reversing a document thru FB08, it is giving the error message,
" Deferred tax: Post invoice and payment separately $1" Message no. DEFTAX020.
This is a stand alone invoice document , without any clearing document. What is to be done ?
Below is the snapshot of FB03:-
Document Number 2256162 Company Code MLTD Fiscal Year 2009
Document Date 24.05.2010 Posting Date 25.05.2010 Period 11
Reference PYX/10-11/032 Cross-CC no.
Currency INR Texts exist
Itm PK BusA Acct no. Description Tx Amount in INR
001 31 U106 503551 PYXIS SYSTEMS PVT.LTD. DD 55,150.00-
002 40 COMM 5656 Membership & Subscri DD 50,000.00
003 40 1371 Service Tax Availed DD 5,000.00
004 40 1372 Ecess on ST Availed DD 100.00
005 40 1373 S&H Ecess on ST Avai DD 50.00
Document Type I2 VEMDOR INV-CORPORATE
Doc.Header Text PYXIS SYS.P.LTD.
Branch number Number of Pages 0
Reference PYX/10-11/032 Document Date 24.05.2010
Posting Date 25.05.2010
Currency INR Posting Period 11 / 2009
Ref. Transactn BKPF Accounting document
Reference key 0002256162MLTD2009 Log.System MALCLNT999
Entered by NITINRB Parked by
Entry Date 25.05.2010 Time of Entry 13:05:08
TCode FBR2
Changed on Last update
Ledger Grp Ledger
Ref.key(head) 1 Ref.key 2Hi,
Check whether OSS note 913805 (see below) offers a solution to your particular issue.
Kind regards, Robert
Note 913805 - Error FF891 or DEFTAX025 when posting FI-Documents Version: 5
Summary
Symptom
The posting of FI-documents cannot be executed due to one of the following error messages:
FF 890 "Vendor and customer items in document with deferred taxes"
FF 891 "G/L account item without tax code in document with deferred taxes"
FF 892 "Error writing to table DEFTAX_ITEM"
DEFTAX 025 (no specific text)
Also update terminations and other errors which are related to function group TAX4 may be the topic of this note.
Other terms
RFUMSV25; RFUMSV50; VAT; deferred tax; BTE; DEFTAX_ITEM; TAX4; SAPSQL_ARRAY_INSERT_DUPREC; FI_POST_DEFTAX_ITEM; FF891; FF890; FF892; FF804; 00 671; FF099; DEFTAX020; DEFTAX021; DEFTAX022; DEFTAX023; DEFTAX025; DEFTAX012; DEFTAX_MX027; DEFTAX_MX047; DEFTAX_MX039; DEFTAX; DEFTAX_MX;
Reason and Prerequisites
Accidentally some business transaction events (BTE) for the new solution for deferred tax were delivered in an active state in support packages of SAP releases 4.70 and ERP 2004. The solution is available in the SAP-Standard only from release ERP 2005. Also in ERP 2005 the new deferred tax can cause problems in countries for which the solution is not released.
These BTEs perform strict tests for documents containing tax codes for deferred tax.
Solution
If you are using the old deferred tax, i.e. you use report RFUMSV25 to create transfer postings, you can safely deactivate these BTEs.
Remove the following BTEs:
00001025 DI-TAX CREATE_DEFTAX_ITEM
00001030 DI-TAX SET_DEFTAX_ITEM
00001040 DI-TAX CREATE_DEFTAX_ITEM_REVERS
00001050 DI-TAX CREATE_DEFTAX_ITEM_MR1M
In ERP 2005 (ECC 600) the application key is 'FI-TAX' instead of the above mentioned 'DI-TAX'.
To do this start transaction FIBF
-> Settings
-> P/S Modules
...of an SAP Application
Mark the entries from the list above and delete them.
This deactivates the functionality of 'new deferred tax' for all company codes in all clients on the system. This means that no data is written to table deftax_item at posting time. Report RFUMSV50 can still be started, but it will not process new documents any more.
If in ERP 2005 problems arise in one country but the new deferred tax is used in another country you must not deactivate the BTEs completely. In this case it is possible to restrict the BTEs to be active only in certain countries using the column 'country' in transaction FIBF.
Header Data
Release Status: Released for Customer
Released on: 16.01.2008 20:12:15
Master Language: English
Priority: Correction with medium priority
Category: Program error
Primary Component: FI-GL-GL-F Value Added Tax (VAT)
Affected Releases
Software Component Release From Release ToRelease And subsequent
SAP_APPL 46C 46C 46C
SAP_APPL 470 470 470
SAP_APPL 500 500 500
SAP_APPL 600 600 600
SAP_APPL 602 602 602
SAP_APPL 603 603 603
SAP_APPL 604 604 604
Related Notes
771319 - RFUMSV50: Documentation
Edited by: Robert North on May 26, 2010 11:49 AM
Edited by: Robert North on May 26, 2010 11:50 AM -
FI Gurus,
I recently created a new payment terms with a discount of 1 percent if paid within 10 days. Payable net if paid after. Everything has been going fine, up until I had a payment with a invoiced ate of Nov. 2008. I have the configuration to calculate the discount based on docuement date and not posting date. When I entered the invoice I even got a warning message that the discount for this invoice was expired. Which it gave me the confidence that I was on the right track. Then I went into the line item details and saw that the discount did not take place. But then when I went to pay the invoice thru BF system deducted the 1 percent. I then went to the account details and there was a discount showing. Did I missed anything during configuration?
Your suggestion will be greatly appreciated.Maximum cash discount was checked in FBZP
Maybe you are looking for
-
The three main hurdles to porting existing Flash projects to iOS with AIR
The purpose of this discussion is to identify significant problems currently preventing AIR for iOS from being a viable solution for porting existing Flash apps. These issues have been largely ignored by Adobe, so I hope that everyone will add to th
-
Why do text messages from my iPad appear to some people as if they came from my email address instead of my phone number? This does not happen when I send text messages from my iPhone.
-
Hi All How to TypeCast in vector<>... typedef struct ... to class... //how to cast the vector to vector cast with out using loop // is there any way? //================ This is Type Definition for the class of ClsMytype===================== typed
-
HT3964 Password is right but MacBook pro does not switch on
When I restarted my computer and entered the right password, there was no further response. Am unable to understand what the problem is.
-
Hi All, I am sending Outbound IDOc for CLFMAS through BD93 T-code. But it is sending all the IDOCS for Classification created earlier against vendor. I want to send only selected one. Please let me know how it can be achieved. Thanks, Anuj