Invoice split and copying problem in JEX invoice after ECC6.0 upgrade

Dear All,
After upgrade from 4.6c to Ecc6.0 I am facing following problem in STO billing document(JEX)
1) system created two billing documents for each line item, even though the correction note 885024 applied maually. In 4.6C the system generates single document for the main FG code.
2) The STO line item contains one FG material and one Returnable Packaging material. The system copies packaging item instead of main FG code. In the 4.6c system, the billing document consists only singe line item.
Hope I had summarized the issue well and waiting for expert guidance...
Regards
Sunil Nair

Hi Sunil,
pls check the following criterias in your materials.
Plant
shipping point
shipping conditions
Transportation grp
Loading grp
Regards
Kedasu

Similar Messages

INVOICE SPLIT AND CONSOLIDATION

Hi Everyone!
Do you happen to know any site that I can search for information on invoice split and consilidation? Or perhaps you can share with me some of the documents you have.
I'll promise to reward points for those who'll give me answers. Thanks!!

Hi Clarey,
Invoice Split by Item Category-
In trx VTFA (if your billing is sales order based) choose your billing type and SO type, there select your item categories and there select the field VBRK/VBRP data. In that field you will see the currently used routine. With the help of your ABAP guy create a copy of that routine under a different number and add your lines of code. Let's say you use routine 001.
FORM DATEN_KOPIEREN_001.
Header data
VBRK-xxxxx = ............
Item data
VBRP-xxxxx = ............
Additional split criteria
DATA: BEGIN OF ZUK,
MODUL(3) VALUE '001',
VTWEG LIKE VBAK-VTWEG,
SPART LIKE VBAK-SPART,
END OF ZUK.
ZUK-SPART = VBAK-SPART.
ZUK-VTWEG = VBAK-VTWEG.
VBRK-ZUKRI = ZUK.
ENDFORM.
This is how it should look after modification:
Header data
VBRK-xxxxx = ............
Item data
VBRP-xxxxx = ............
Additional split criteria
DATA: BEGIN OF ZUK,
MODUL(3) VALUE '001',
VTWEG LIKE VBAK-VTWEG,
SPART LIKE VBAK-SPART,
PSTYV LIKE VBAP-PSTYV, <- New line
END OF ZUK.
ZUK-SPART = VBAK-SPART.
ZUK-VTWEG = VBAK-VTWEG.
ZUK-PSTYV = VBAP-PSTYV. <- New line
VBRK-ZUKRI = ZUK.
ENDFORM.
After this routine is created and activated place it as the default copy control routine instead of the old ones.
REWARD POINTS IF U FINDS THIS AS USEFUL...
Regds
MM

Invoice split based only on payer, material, invoice date

Dear Friends,
I have an issue which I don't know how to move further..
Task: avoid Invoice split during collective invoice creation in VF04. Invoice should be grouped by: payer, material, invoicing date.
What I'm doing: clearing all fields which could cause invoice split in copy routine rv60c903 ( this one is used for this type of invoices ) in VBRK. Then changing partners - sold-to, ship-to, bill-to in enhancement., so that they are equal for all invoices with the same payer party. And also VBRK-ZUKRI is filled accordingly with the grouping parameters: VBKD-PERFK and VBRP-MATNR.
What I can't understand: when I run SIMULATE in VF04, the invoices are grouped correctly, BUT when I run the actual Collective Billing button, for each delivery a new billing document is created.. I can't understand this!
Thanks a lot in advance!

Hi
As Madhu tells you, check your settings in customizing (tcodes VTFA and VTFL). Second, take in account always the SAP Note 11162 - Invoice split criteria in billing document and related notes. Finally, set your own algorithm to rule the splitting defining ZUK structure to determine the value of VBRK-ZUKRI (remember that this field is a char 40) in your own VOFM subroutine.
I hope this helps you
Regards
Eduardo

I have been getting a message saying my iPhone cannot be synced because an unknown error occurred (-50). I have an iPhone 4, and never had this message until after I upgraded to the new OS.

I have been getting a message saying my iPhone cannot be synced because an unknown error occurred (-50). I have an iPhone 4, and never had this message until after I upgraded to the new OS. Does this have something to do with icloud?

I have the same error on both iPad & iPhone when connection is made but seems to sync when I manually sync.

Invoice Splits and Invoice Consolidations

Hi All,
Can anyone suggest me in regarding the Invoice Spits and Invoice Consolidations and in which transaction can I find these type of invoices.
Regards,
Bharth.

Dear Bharath,
1. To split an Invoice follow this:
VF01 - Enter the Delivery Document Number & from the Menu bar click in the button Selection List
Here you can select the required items & split the Invoice.
2. In case of collective Invoices the following need to be the same:
Payer, Billing date & Payment terms.
Go to VF01, enter multiple Delivery numbers (with similar Payer / Billing Date & Payment terms) & press enter.
Hope this helps. ..
Give points if useful...
Thanks,
JIgnesh Mehta

Scale and copy problem

hey I was wondering if anyone can help me, im trying to do a tutorial in a magazine and one portion of the work needs me to scale and copy using the command shift+alt problem is this doesnt work, the shift key alone does constrain the proportions and holding alt with shift contrains it from the centre point but it doesnt copy, holding alt alone does copy thou... this command doesnt work , I can do this using the scale tool but it the work needs to be very precise and the scale tool is more awkward cos i need to keep setting the point and its not always exactly the same... so basically why doesnt shift+alt constrain and copy a shape? any help would be great. my comp is new and dont have any bugs or other issues.. any help will be great! thanks

lucillecasamadera,
I've been using Illustrator since 1988. I have been an Adobe Certifed Expert in Illustrator since CS2. I can assure you you've either misunderstood the tutorial or the tutorial is simply wrong. (that does happen)
Dragging a transform handle with the Alt key will never result in a copy. Illustrator simply does not work that way. There's nothing wrong with your version. You are trying to do something Illustrator does not do.
You must use a dedicated tool (scale, rotate, skew, selection) in order for the Alt key to generate copies when dragging.
You can argue it all you want... but that's the answer. Sorry it's not the one you wanted to hear.

HT4623 Sound and other problems with Ipad 3 after ios 6.1.3 update

I purchased Ipad 3 last year and got problem of losing sound when I restored the Ipad throgh itunes. The sound came back automatically after I charged the device to 100%. Recently I got the same problem when the operating system was Ios 6.1.2 and then i got updated it to ios 6.1.3. The problem has not been solved while has been added up. Now the Ipad operation is slow, its either freezes and crashes frequently. Once it gets in sleep mode then it does not come back untill i press power button and home button togehter for sometime. I have checked all settings like mute and have restored the ios multiple times on two separate PCs but the problem is still there. Please help me what i need to do next.

Try a reboot of your ipad. Hold the Sleep/Wake button and Home button simulataneously. Keep holding, ignoring the red slider, until the Apple logo appears. Release the buttons and let the ipad restart. A reboot often fixes numerous problems.
Also are you aware that by suncing with a different computer it is likely the personal stuff you had on your ipad from your imac will be removed?
The ipad is designed to sync with only one device.

Registration requests and other problems with LE 8.0.2 upgrade from 7.2.3

Great upgrade. Improved sound, look and features, but:
1. When I switch between Logic Express 7 and 8, I'm forced to register each version again & again.
2. If LE 8 is left open when I put my computer to sleep, it won't recognize an iControl at wake up. After deleting the device from the surface controller set-up, rescanning it & resetting midi drivers, the play button won't work. It took until OS X 10.4.9 for Apple to get the iControl to work in LE 7.2.
3. The instrument plug-in window doesn't come up after selecting a software instrument even with the box checked in preferences.
3. If you've used a lot of preset voices in LE 7, the upgrade will require a lot of reprogramming. Tones like Jangly Jack are gone completely. Some missing LE 7 voices like the Ubiquitous DX can be imported into version 8 and saved as a channel strip setting. Logic 8 & GarageBand 3 lack a good DX7.
4. The word Strings is misspelled in the channel strip setting window.
5. Some LE 7 keyboard commands are no longer available in LE 8. For example, at certain times, you could move around an environment window in LE 7 with shift-plus and shift-minus keys. There was no way to program that in LE 7 either.

Hi Robby
I don't know if you solved your 'register now' problem concerning LE7 & LE8. I suspect the error your making is trying to open up each project in it's initial program - i.e. 7 or 8. The computer sees it differently (concerning Library settings etc) and your problem will be solved (hopefully) if you open up things in the right order :
1° Open Logic EX 8.
2° Then open the old project from LE 7. This should then open in your new system of LE8.
Of course if you wish to keep working on LE7 projects in LE7 then you'll have to change between each system as you go. You should remember that in terms of programs (with the same 'name/directory') that a computer works much like a tightly packed garage - if you wish to get out your old bike you'll have to move the new one first and vice versa!!
Normally you won't be asked to register again, BUT ... remember that you have to decide if you're going to save in 8 (and so keep working in that format) or not and I imagine if you've bought an update this is certainly your idea. Of course if you now decide to close LE8 and then start clicking on files in LE7 you'll be back at square one ..... register now etc. Please also remember that LE7 projects can work in LE8 but not the other way round, so once you've opened a LE7 project and made adjustments using LE8 you can't reuse 7 - I suggest you back up all your LE7 first on external/DVD support for later/backwards adjustments or reference.
Another small point to remember is that your computer will now be saving your project a second time in a LE8 format. So at some point you should remember that you'll be using valuable HD space twice over if you just convert and save in the new format - if you see what I mean?!

[SOLVED]Problem with logging in after system upgrade

Hi,
I'm encountering some problem after rebooting my machine just after last upgrade. Few minutes ago I was sure I found the source of the problem when system hang on "Reached target Graphical Interface" message. Reason - nvidia drivers had to be replaced with legacy version (https://www.archlinux.org/news/nvidia-340xx-and-nvidia/). But it didn't help. Also it made things a little bit worse. Because now my system uses nvidia-340xx and it seems drivers are fine but when login screen of lightdm should appear screens stay blank... and nothing happens. I simply can't do anything.
What I noticed is also xfce4-session was upgraded (4.10.1.3->4.10.1-5) and maybe this is the separate problem? but I can't downgrade this package as some time ago I removed all contents of /var/cache/pacman/pkg.
What I have is arch on pendrive so I can chroot into existing system.
Any ideas?
Last edited by jakub (2014-10-08 22:09:02)

I found something similar to line
(EE) Mar 07 14:05:07 NVIDIA(0): WAIT: (E, 0, 0x837d, 0)
these values are not exact as I'm too tired now to rewrite the real ones from screen
maybe I should install some older nvidia drivers (these 340xx are broken somehow I think). Unfortunately I don't have my /pkg content anymore.
Where can I download packages like nvidia-340.32-1-x86_64.pkg.tar.xz from? (according to pacman.log I had this version back in July and it was working fine I think).
I could also start X with Nouveau drivers but not xfce (anyway I would like to install old nvidia drivers back)
Last edited by jakub (2014-10-08 22:03:11)

Problem in Predefined Properties after SP14 upgrade

Hi,
we are facing one Problem after the SP14 upgrade in the Development environment.The Problem is as follows:
Actually we have defined some Predefined metadata Properties which give us option of country and Locality while uploading any Document.The Property of Country and Locality are Interlinked and whenever user check the country checkbox (Like China) the interdependent Locality List appears (like Shanghai).But after SP14 upgrade whenever we are clicking the country checkbox the Loclity checkboxes are not appearing.(Even though some processing happens).I have checked all the configuration under System admin >Global services> Property Metada -->Group and Properties.Property Structures -->Property Groups etc and match them with all the properties of that in the Production environment.But we don't find any property missing like Dependencies etc.
Is there anything else we need to check?Anybody of you have faced the same Problem earlier?
Please Help It is urgent
Regards
Imran

Dear Imran,
we dint migrate the properties to the new server.
we have created those properties again in our new server.
I am using those properties for two purposes
1.to refine the search ,adding them in the search option set.
here i am able to see the all properties and there dependedncy .
its working fine.
2. while uploading the documnets.
I created a metadata group mapped those properties to all groups.
all process as we have done in our old server.
here i am able to view all the properties except 1.
for ex country and city
I am able to see the property country ,
but the property city is not visible only .
where as i can see both the properties in search and working as desired .
If the problem is with patch,then it should either not work in the search also.
can u please suggest me on this .
Thanks in advance
Regards
swetha pola

Problems with loading mailbox after GW8 upgrade

I just recently upgraded to Groupwise 8 in a school district. I support many school districts and this is the first time I've had this problem. Users are complaining that from outside the network(home access) that when they log in to web acc, the mailbox will just hang at "Loading...."
The toolbars, menus, and folder list all display properly, but it hangs trying to load the message list for the mailbox. It works fine when on the internal LAN, only happens from home. And the problem is not constant - sometimes it will work, sometimes it will not. I've had users complain about the issue from the entire spectrum of web browsers, from IE 6,7,8 to Safari and Firefox. I've had users clear cache/temp internet files and still have the problem.
I do see a java error on the logger screen, I'm not sure if its related:
com.novell.webaccess.providers.gwap.GWAPException: Invalid Parameter
The only reference I could find to the above error on these forums(or anywhere for that matter) was in the following thread:
http://forums.novell.com/novell-prod...unloading.html
Which doesn't describe the problem I am having....
Has anyone else seen this problem or have an idea what to check?
Thanks in advance for any help
-Rich

John Cunningham wrote:
> I'm getting exactly the same error after my upgrade from 7.0.3 to 8.0.1.
> WebAccess 'kinda' works: you can log into it but there are java (Tomcat,
> I presume) errors on the console:
>
> Novell GroupWise WebAccess
> Version 8.0.1
> (C) Copyright 1993-2009 Novell, Inc. All rights reserved.
>
>
> <GroupWise WebAccess> WebAccess Servlet is ready for work
> Sep 4, 2009 6:45:49 PM org.apache.jk.common.ChannelSocket init
> INFO: JK: ajp13 listening on /0.0.0.0:9010
> Sep 4, 2009 6:45:49 PM org.apache.jk.server.JkMain start
> INFO: Jk running ID=0 time=0/85 config=null
> com.novell.webaccess.providers.gwap.GWAPException at
> com.novell.webaccess.providers.gwap.XGWAP.xlatAvai lableDictionaries(U
> nknown Source)
> at com.novell.webaccess.providers.gwap.XGWAP.xlatMess age(Unknown
> Source)
>
> at com.novell.webaccess.providers.gwap.XGWAP.itemRead (Unknown
> Source)
> at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)
> at
> sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.
> java:39)
> at
> sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAcces
> sorImpl.java:25)
> at java.lang.reflect.Method.invoke(Method.java:324)
> at
> com.novell.webaccess.providers.gwap.XGWAP.dispatch ServiceHandler(Unkn
> own Source)
>
>
> . . . you get the picture.
>
> I've re-installed the WebAccess Application from scratch, no diff.
>
> Users can log into it, but when they open a message they get a dialog
> box "Unable to process request. Please contact your system
> administrator." Then it displays the email message but it does not mark
> the messages as read in the main browser window.
>
> Besides that, Tomcat has crashed on me and hung completely, requiring me
> to reboot the server.
>
> I've spent a lot of hours trying to get this resolved.
>
> The WebAccess agent is on another (clustered) node. The WebAccess
> Application is installed on a single NW65SP7 server (i.e. not clustered).
>
> Any suggestions would be greatly appreciated.
>
>
> rpf2 wrote:
>> I just recently upgraded to Groupwise 8 in a school district. I support
>> many school districts and this is the first time I've had this
>> problem. Users are complaining that from outside the network(home
>> access) that
>> when they log in to web acc, the mailbox will just hang at
>> "Loading...."
>>
>> The toolbars, menus, and folder list all display properly, but it hangs
>> trying to load the message list for the mailbox. It works fine when on
>> the internal LAN, only happens from home. And the problem is not
>> constant - sometimes it will work, sometimes it will not. I've had
>> users complain about the issue from the entire spectrum of web browsers,
>> from IE 6,7,8 to Safari and Firefox. I've had users clear cache/temp
>> internet files and still have the problem.
>> I do see a java error on the logger screen, I'm not sure if its
>> related:
>> com.novell.webaccess.providers.gwap.GWAPException: Invalid Parameter
>>
>> The only reference I could find to the above error on these forums(or
>> anywhere for that matter) was in the following thread:
>> http://forums.novell.com/novell-prod...unloading.html
>>
>> Which doesn't describe the problem I am having....
>>
>> Has anyone else seen this problem or have an idea what to check?
>>
>> Thanks in advance for any help
>>
>> -Rich
>>
>>
fuplivsyr

Problems with VMWare Fusion after MacOS Upgrade

Prior to upgrading yesteday I was able to use "open with" to select programs that were installed in either my Win 7 or XP VM on VMFusion. After the upgrade no longer set any of the Win apps. This is a real pain a now i have to open Fusion, Win 7 and use the Office 2010 app to open the file.
Has any one else had this problem? Is there something I can do to fix this?

Hi cjpembo,
my Card looks like:
01:07.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
01:07.1 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
My card seems to be another version. Regarding to the v4l Wiki: http://linuxtv.org/v4lwiki/index.php/Tu … ted_Tuners
A new Hauppauge WinTV PCI-FM card is here (pci_ids: 14f1:8800, 14f1:8811), using the TCL MFPE05-02 PAL (DK BG I) FM tuner. It just implements mk3 API, you can use philips 1216me mk3 (tuner=38) instead.
If I don't specify any module parameters, the tuner type 0 is selected.
ACPI: PCI interrupt for device 0000:01:07.0 disabled
tda9887 2-0043: destroying instance
tuner-simple 2-0061: destroying instance
Linux video capture interface: v2.00
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 16
cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models [card=1,autodetected]
cx88[0]: TV tuner type -1, Radio tuner type -1
tuner' 2-0043: chip found @ 0x86 (cx88[0])
tda9887 2-0043: creating new instance
tda9887 2-0043: tda988[5/6/7] found
tuner' 2-0061: chip found @ 0xc2 (cx88[0])
tveeprom 2-0050: Encountered bad packet header [00]. Corrupt or not a Hauppauge eeprom.
cx88[0]: warning: unknown hauppauge model #0
cx88[0]: hauppauge eeprom: model=0
tuner-simple 2-0061: creating new instance
tuner-simple 2-0061: type set to 0 (Temic PAL (4002 FH5))
input: cx88 IR (Hauppauge WinTV 34xxx as /class/input/input8
cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 16, latency: 32, mmio: 0xe6000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
The card is not listed in my local PCI ID repository. And it seems, that the PCI ID is not known to the PCI ID Repository: http://pci-ids.ucw.cz/iii/?i=0070
Badcel
Last edited by badcel (2008-08-24 09:46:18)

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

Problems with "No WiFi" after OS upgrade

Ok....I have a 2G or 3G iPod Touch (not sure which but got it in January 2010) that I just finally upgrade to the the newest OS because I got tired of being told I couldn't download apps due to the OS. Well, now it's really fixed because I can't download anything and the iPod is a useless as a brick. I have the infamous "No WiFi" grayed out issue. Please don't try to tell me it's a hardware issue because that's a bunch of crap. Anyone with half a brain knows that it's the OS if it worked before the upgrade and now doesn't work at all. iPod worked just fine with absoultely NO WiFi issues before the upgrade and now it's useless after the upgrade. Clearly this is a VERY common issue from the Google searches I have done and clearly in MANY cases there appears to be no real fix. I'm a very technical-savy person and I've already spent at least 4 hours searching, backing up and restoring to no avail. I've rebooted the iPod, rebooted my router, restored the iPod to a new iPod, retored the iPod to the back-up and bascially NONE of the ideas work.
It is inconceivable to me that there is not a fix out there for this issue and that there isn't even a system restore to go back to the old operating system. Even Microsoft let's you restore to a previous time. That's pretty basic funtionality. For as bad as Microsoft can be, they at least understand that it's a necessity at times. Apple apparently doesn't even acknowledge that their operating system is broken. They'd rather you run out and buy a new iPod. Furthermore, I can't believe with the number of times I've seen the issue online, that there isn't a bigger outcry over it.
So, all you people out there that brag about how Apple products are more immune from all of those viruses, just realize you are being duped from Apple who is in essence creating its own virus by giving you an OS that renders your product virtually useless.
Would welcome any additional fixes for this issue, but after owning at least 6 different iPods, I will make sure I never buy another Apple product again unless this thing gets fixed.

No. That won't be necessary. To me that is an unacceptable and ridiculous solution. I'll just go buy an Android product and make sure I never waste another penny on Apple.
Really? Apple is that stupid that they can't create a fix that is downloadable? I'd stay far away from their computers and tablets if that's the case.

Navigation and other features suddenly stopped working after I upgraded to FF4.

A day or two after I upgraded from FF 3.6 to FF4, all the ordinary navigation features stopped working. Backspace/alt-<, even the back and forward arrows, Crtl-R to reload a page, and the address field doesn't show the current URL unless I click the identify information icon. All very odd. None of the keyboard shortcuts work.
My bookmark toolbar does not load automatically, although I guess that Vista is the source of that issue.

Doing a downgrade is not anything I have done or feel comfortable with. Is there a clean procedure to accomplish this?

Invoice split and copying problem in JEX invoice after ECC6.0 upgrade

Similar Messages

Maybe you are looking for