Invoice verification with GR based IV for import PO

Hi all,
Kind advice required here.
We have an import PO where the vendor in VMR has the GR based IV indicator disabled which enables us paying up the custom duty IV.
Now we receive the goods in partial quantities and there are several GRs for the P.O.But whenever we go in for the IV of the GRs the system is accumulating the GR quantity and giving a single figure & quantity (due to that indicator in VMR ).
Is there any way by which we can make the IV on GRN basis?
Because it is requiring manual entries at the time of IV.
Thank you

Dear,
If you create invoice verification against good receipt system give error "Invoice Quantity is greater than good receipt quantity".
So please check Subsequent Debit in MIRO against good receipt.
Regards,
Mahesh Wagh

Similar Messages

  • Invoice verification with reference to billing document in cross company

    Hi Gurus,
    We need to do "Invoice verification with reference to billing document in cross company code scenarios".
    At present I am processing through MIRO by calling the PO.
    What is the alternative for this and how to do it?
    Thnx

    Hi
    It is not possible to do the invoice with reference to billing document.
    You can create the Invoice referncing the PO used for STO or the delivery note (as mentioned in the Material document) or directly on the vendor.
    Thanks & Regards
    Kishore

  • Invoice Verification with material document - can we check material doc?

    hi,
    we have Invoice Verification with material documents in MIRO
    is there any way to find out (from MSEG or ekbe maybe) if a particular
    material document was invoiced or not ?
    (without comparing material doc and invoice lines ?)
    thank you,
    Regards,
    michal

    Hi
    Materials Management under Logistics Invoice Verification u2192 Incoming Invoice u2192 Activate Direct Posting to G/L Accounts and Material Accounts
    When you create an invoice containing only items without reference to a PO, the system cannot copy any information (such as currency or invoicing party) from the purchase order. This means that in addition to the document date and the amount, you first have to enter the following information in the header data:
    1. On the Basic data tab page: Currency
    2. On the Payment tab page: Baseline payment date
    3. On the Detail tab page: Invoicing party
    Finally, you enter the item data on the G/L Account and Material tab pages.
    use transaction FB60 to post vendor invoice
    SAM

  • Diff between GR based invoice verification and PO based invoiceverification

    Dear Friends
    Can any body pl clarify the difference between the GR based I V and
    PO based I V and how to configure the above.
    regards
    rk

    Hi,
    Gr Based Invoice Verification :  In this a separate invoice item is created for each delivered partial quantity.If we make the allocation with the purchase order system then propose more than one invoice item as a default if more than one partial delivery has been posted for the po item.
    If we make the allocation using delivery note the system proposes exactly the po items from this goods receipt, plus the the quanties posted.
    using gr based we can assign each invoice item uniquely to a good receipts item. Good receipt and invoices matched in po history
    In Gr based invoice qty should not be greater than actual delivered qty.
    Purchase Order Based Invoice Verification :  In this system generates one invoice item in the item list for each po item. The system provides quantity to settle in as difference between total d livered qty and thee total invoice qty.
    If we make allocation using delivery note the system determines the relevant po items with their total qty to settle-in the same way as if there was a reference of purchase order.The system will not propose qty relevant in delivery note.
    If there are several good receipt the purchase order history will not tell you which invoice came from which vendor.
    Br,
    Tushar Patankar

  • Setting GR-Based Invoice Verification in ME21N based on Order Type

    Hi Experts,
    I have a requirement that, on creating PO (ME21N), GR-Bsd IV (GR-Based Invoice Verification) fields to be checked, based on the selected Order Type. 
    I am using BADI ME_PROCESS_PO_CUST for that.
    I am using Process_item Method and getting Header Data through GET_HEADER.
    Following is the Code.
    method IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM.
       DATA:ls_ekko TYPE   REF TO IF_PURCHASE_ORDER_MM.
       CALL METHOD im_item->GET_header
           RECEIVING
             RE_header = ls_ekko.
    endmethod.
    In this case, as type of ls_ekko is IF_PURCHASE_ORDER_MM please help me how to read header data from ls_ekko, and I am new to abap objects.
    Thanks in Advance.

    Hello Eilish,
    With regards to Goods reciept indicator, firstly the system looks
    for any reference documents like purchase order or contract and takes
    the flag from there.
    If no reference documents or contracts are referenced, then
    the system looks for an info.record to take the flag from there.
    If there is not a info record then system will carry out the
    GR-BasedIV indicator from the vendor master.
    Hope this helps,
    Ray

  • Invoice Posting with two accounting documents for Service PO

    Hi Gurus,
    We have created one service (GR based Invoice verification) PO for which we have assigned a costcenter which has been created for different company code(rather than what company code we have mentioned in PO).
    Now during Invoice creation out of 6 invoice entries only one Invoice has been created with two accounting documents for two different company codes, when we found this and canceled the same only basic entries has been reversed.
    I just wanted to know how this single invoice has been created with two different accounting documents for two different company codes.
    Please guide me in this regard.
    Thanks and Regards,
    Ravindra C.M

    Hi Aasif,
    Thanks for your reply, if that would have been case then each Invoice created for that PO should have two accounting documents but out of 6 invoice created only one invoice has been created with two accounting documents.
    I am completely agree with you that it has posted as inter-company transfer but why only one invoice has been created with two accounting documents.
    In addition to the above I just wanted to know if for GR-based invoice verified PO if we create a Invoice before creating service entry sheet whether two accounting documents will be created as we have mentioned different company code costcenter.
    Please guide me in this regard.
    Thanks and Regards,
    Ravindra C.M

  • MIRO - Invoice Verification with reference to Delivery note.

    Dear All,
    In our organisation we are doing MIRO with reference to Delivery note. As same number of delivery note is being submiited by multiple vendors, after entry of that delivery note in MIRO system shows large list (Closed & Open for MIRO). This becomes difficult to select the required delivery note.
    Is it possible to make display of only those delivery notes against which MIRO (Invoice verification has not done).
    Also MIRO with reference to GRN number is possible or not ?
    Please suggest.
    Regards,
    Shekhar Kisan Gaikwad

    In our organisation we are doing MIRO with reference to Delivery note. As same number of delivery note is being submiited by multiple vendors, after entry of that delivery note in MIRO system shows large list (Closed & Open for MIRO). This becomes difficult to select the required delivery note.
    Is it possible to make display of only those delivery notes against which MIRO (Invoice verification has not done).
    Also MIRO with reference to GRN number is possible or not ?
    HI,
    To avoid difficulties post miro with Reference document (PO Reference Tab) - Delivery note click on Radio button a possible entries for delivery note screen will appear. Here you can search specific delivery note by a lot of criteria which will save ur time and effort also you can see MIGO Document.  Click and put tick to adopt and post Delivery note / migo and enter required field.

  • Invoice verification despite GR based IV ticked

    Hi,
    A PO with GR-Based IV was created. GR performed and reversed the same day.  System allowed invoice verification even when goods receipt quantity is 0.?  is that standard behaviour?.. how do we stop it? is it something to do with setting up tolerance?.. Please advise which tolerance key to setup?
    Umang

    Set the tolerance limit DW as per your requirement from OMR6. and then set the message M8088 - Quantity delivered is zero as error from OMRM.
    Then test the same scenario.

  • Invoice verification with reference to material document

    Dear Experts;
    i want to make invoice verification (MIRO) with reference to good receipt document not the all quantity in the purchase order. is this possible ???

    Hi,
    Option - 1
    If you have done 3 separate GR's for the above qtys then if you do MIRO with reference to PO then 3 line items will appear with the respective qtys. You select the one you want & delete the rest.
    Option - 2
    Check whether you have entered any values in the delivery note field while doing GR. If yes then do MIRO with reference to Delivery note rather than PO so that qty in the GR material doc will flow to MIRO automatically.
    Thanks & Regards,

  • About invoice verification without GR-based indicator set in PO

    Dears,
    As I know, when carry out invoice verification for a PO without GR-based IV set in PO/Vendor/PIR, there will be no reference invoice quantity and value in item lines of the invoice. User must input them manually according to real values in the invoice paper sheet delivered by Vendor.
    Now our client want the system sets the default value from PO in invoice verification, and they don't want to tick GR-based IV indicator,  how to realize it?
    Thanks all for your reply!

    Dear,
    1) At the time of time of Vendor master - XK01.
    In purchasing view tick on GR Bsd Inv.
    So due to this, at the time of purchase order creation this indicator is autometically put from vendor master.
    2) Quantity of purchase order is autometucally pur from good receipt.
    So create good receipt first than create invoice verification.
    So due to this at the time of invoice verification system take quantity from good receipt
    Regards,
    Mahesh Wagh.

  • Invoice verification with reference to purchase order

    Hi experts,
    May I know is there any setting or configuration that control the data/field copy from purchase order to invoice in MIRO during invoice verification?
    How do we control which field should be copied? If I add another new field in purchase order, how can I make sure it is copy over to invoice in MIRO during invoice verification?
    Thanks & regards,
    JT

    Hi Andra
    Thanks for your reply.
    Actually what I would like to do is that I added a payment method field in PO. And I would like the payment method to be copied into invoice automatically when we perform the Invoice verification in MIRO instead of manually enter.
    Is there anyway to do that?
    Thanks and regards,
    JT

  • Std report on logestic invoice verification with all condition details

    Hi friends,
    We are using SAP ECC 6,
    we need complete breakup of Logetisc Invoice verification details with all condition like  Material, Services, Transport (Condition), Octroi (Condition), Sea Frieght (Condition)
    Please reply ASAP
    thanks
    regards
    Jitendra k. Surana.

    there is no such std report available....have a customised one.

  • Excise invoice tab missed in migo screen for import material

    Hai,
    What we had done,
    1 we raise import po.
    2 we posted MIRO for custom invoice purpose,
    Next when we  are doing Migo entry Excise invoice tab  is not display.
    What is solution for this issue ?
    What we have checked.
    1. J1id all combinations, means Chapterid with material, cenvat determination, vendor excise details, Excise indicator for plant,
        Excise tax rates.
    2.At the time of po they ticked invoice base.
    3 We checked movement type 101 for excise duties.
    4.we checked excise group also in this Excise invoice captured is ticked.
    5.. i also checked table for movement type.
    Note: Against this material master no entry is there so this is first time material.
              Relating to this vendor previously we have entries relating to other material masters.
    What is solution for this issue ?
    Why it is not displayed in MIGO Screen ?
    Regards,
    Basha.

    Check the following
    1. Chapter id maintained in material master or j1id.
    2. Cenvat determination maintained
    3. Tax indicator for plant and vendor.
    4. Import conditions rightly classifed under defaults.
    5. Movement type rightly classified
    6.  In case you have created a new plant check for following in the client you are doing the transaction
    IMG>>Logistic-General>>Tax On Goods Movements>>India>>Basic Setting>>Maintain  Plant Settings
    7. Check if you have not done any enhancements, some times this may happen if any enhancement done.
    If all this is checked and in order it should work.
    Regards
    Sangeeta

  • Invoice Verification with price variance

    Hi sap gurus,
    While doing the invoice with price variance ,system is not giving the error in production server.i have cheked it in customisation setting .But it will  give the error in qaulity server.
    Please help.
    Edited by: Dhawal Desai on Apr 2, 2009 12:58 PM
    Edited by: Dhawal Desai on Apr 2, 2009 1:02 PM

    Hi,
    Please check configuration settings in Quality server & comapre them with production server.
    Along with this please check the transport request created in Production server has been transported to quality server or not.
    Thanks ,
    AMIT

  • Office 365 support with VB6 based application for example Mail Merge

    Hi Development team,
    Could i know how to use office 365 in our project step by step ? is it free available as trial version which work successfully
    As our project is currently using Microsoft Office 2003/2007. for we example we run Mail Merge module and it opened in MS word Office 2007 by default as it is installed in our local Machine.
    Currently i don't have office 365 licence software, does it require?
    My point of contact is one of client is asking for why not we are using office 365 which is on cloud version.
    Thanks 
    Anuj kumar
    India 
    91+9582890489

    Hi,
    Welcome to MSDN.
    I am afraid that issues related to VB6 are not supported in these forums, you could check that thread :
    Where to post your VB 6 questions
    In addition, you could post issues related to Office 365 which are not related to VB6
    in http://answers.microsoft.com/en-us/office?auth=1 to get supports.
    Thanks for your understanding.
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for