Invoicing of manual billing documents

Hello,
I am trying to invoice manual and periodic bill document together for a particular period.However,when i run EASIBI,the manual bill document does not get picked up and only the periodic bill doc gets invoiced.
Is this a config issue or while creating data we should keep certain things in mind?
Thanks,
Shreeraj

Shreeraj,
maybe you check into help.sap.com (they have an example for a manual bill).
there it is also stated that you should - Call Transaction EA16 Create manual billing, and enter a contract number and a key date. If you set the Joint invoice indicator, the document can only be invoiced jointly with an automatic document.
I wonder, whether the manual bill document is released and ready to be picked up or it is the correct posting period?
Hope this helps,
Tom

Similar Messages

  • Aggregate Invoicing - Manual billing documents

    Hi All,
    I am working on Aggregate invoicing functionality for the distributor.
    So far, I have posted the aggr bills (FICA and Billing) tables DFKKTHI / ECROSSREFNO. However this i have managed to do only for Consumption Bills (periodic/interim).
    I have checked the SAP cookbook which states that the manual bills cannot be invoiced without a consumption bill which is fine.
    However, I am unable to invoice the manual bill with the consumption bill as well.
    The steps I followed.
    1. Created a periodic bill and a manual bill (EASIBI / EA16).
    2. Released the manual bill.
    3. Now I try to invoice the periodic and manual bill into 1 invoice (have checked the dates). I select both the billing documents.
    However 2 invoices are created.  The periodic bill has an entry in DFKKTHI and the manual bill does not.
    Moreover the ISU-data tab in the FICA document does not get populated. No cross-ref number is generated either.
    + Note : At this point the R403 event was made inactive +
    FYI,
    1. At the contract , joint invoicing = 3 [Contract must not be invoiced with other contracts]. It does not allow me to set it to 1 and 2 because of the deregulation
    2. I checked the joint invoicing event R403 and setting the E_group value the same gives an error as well.
    Any help would be greatly appreciated.
    Thanks and Regards
    Averil.
    Edited by: Averil Annie Lobo on Sep 28, 2010 1:49 PM
    Edited by: Averil Annie Lobo on Sep 28, 2010 1:51 PM

    Closing the thread.
    OSS Note 1484625 applied to resolve the issue.

  • Invoice against Cancell billing document

    Hi Experts,
    user created move-out billing document & invoice  for the period 25.12.2011 to 07.01.2011.
    then user cancel the above billing document and invoice due to modification in billing document .
    now again user created move-out billing document for the period 25.12.2011 to 02.01.2011.
    when we are invoicing to that billing document two invoice are created one for the period of 25.12.2011 to 07.01.2011 ( for reversed billing order ) and second one for the period 25.12.2011 to 02.01.2011 ( for current billing order )
    Regards
    Naresh

    Hi,
    Please check whether the original move-out document is reversed by adjustment reversal or not. In that case, SAP will first post the negative amount of the first invoice for the period 25.12.2011 to 07.01.2011 and then it will post the current amount of the newly created invoice.
    Otherwise if you triggered a full reversal of an invoice document, SAP will never create an invoice document for the same.
    From your statement you mentioned that user has first reversed the bill document and then the invoice document. If a bill document is already invoiced, you can not reverse the bill document first without adjustment reversal.
    Hope it helps.
    Thanks.
    Nirmalya

  • Excise Invoice creation error -Billing document does not exists

    Dear Experts,
    I have created supplementary sales order, billing with refernece through sales order by VF01.
    Now I want to create Excise Invoice but system gives error Billing Document does not exists
    I have checked billing document in VBRK table & it is showing in table.
    My item categroy is L2N -and set it to C
    I have assigned Billing type under Outgoing excise invoice ->Assign billing type to delivery type still my excise invoice is not generating.
    Pl. guide me.
    Thanks
    Trupti

    Resolved my problem.
    Actually in Billing item categroy if you put SD Doc. Catg. as M you can do excise invoice even if you have not created the
    outbound delivery.
    So cycle will be Supplementary Sales Order->VF01 with ref. to SO->J1IIN -Excise invoice creation.
    Thanks to all.
    Trupti.

  • Excise invoice number in Billing document number

    Hi
    Customer incoming payments are made with reference to Excise invoice number. We dont have this number while clearing incoming payments through F-28. How can we bring in Excise invoice number in the accounting document for billing invoice ( thro' VF01) so that we can use it while clearing through F-28.
    Thanks

    Hi
    We thought of a work around. We are going to issue the commercial billing invoice document to the customer, which will be treated as Excise invoice for him, and run J1In just for internal SAP updation purpose. This way, we can bring in commercial billing doc reference in 'Assignment' field of the accounting document and we can use it in F-28 for incoming payment clearing
    Thanks

  • Relation between Tax Invoice and Billing Document

    Hi,
    Could you please let me know the following;
    1.  How to find a Billing Document from a Tax Invoice number, i,e the table linkage. I have found out a way by passing the XBLNR (tax invoice) field in BKPF table and getting the BELNR (Accounting Document). Now, we can pass BELNR into BSEG and get the VBELN (Billing Document). Is the above the correct method ?
    2. If the previous method mentioned is correct, then for Service related Invoices where there are no Sales Document or Delivery is created, we are unable to link the Tax Invoice to a Billing Document (the field VBELN in BSEG is empty).
    Could you please help in this regards.
    Thanks & Regards,
    Sandipan

    Have you seen your posted documents through MIGO and MB1C in MB03.Are you able to see any document type difference once you select header.
    Refer below link you will understand the process.
    http://help.sap.com/saphelp_45b/helpdata/en/f8/6cec6eb435d1118b3f0060b03ca329/frameset.htm
    Edited by: Sridhar Jayavarapu on Feb 10, 2010 7:01 PM

  • Manual billing

    Hi,
    Has anyone some experience with manual billing?
    Or can someone tell me where I can find some cookbooks about billing and invoice or manual billing in particular
    Here's the situation:
    period 01.01.2006 until 31.12.2006. Number of habitants is 3.  Each of these habitants is entitled to 15 m3 of free water (45 m3 total).  on 01.01.2007, we receive a notification that the number of habitants has been reduced to 2 as of 01.06.2006. This means that we have to correct the period from 01.06.06 till 31.12.2006.
    How can I do this with manual billing without using the original billing doc as a template (or is this required)?
    Thank you,
    Joke

    Sorry
    No Manual Here.
    But you must build a vision of standard Billing documents tables and build your own standard document to use as a template..
    Best Regards
    Reward Points for Helps

  • How to create a manual bill thru easibi

    I will like to know what parameter to pass to create manual bill thru easibi.

    Hi,
    It is not possible to create manual billing document via EASIBI as it does not require any billing order.
    You can crate manual billing via EA16 as mentioned. You need to define the line item and other details and once the document is created, releae it manually via EA16 only so that it can be used for invoicing.
    Hope this Helps!!
    Regards,
    Rajesh Popat

  • Bill key date for manual billing

    When a manual billing document is invoiced, the bill key date field in table ERDK remains empty even though it has been correctly filled in ERCH. Any idea why this is so and how it can be corrected?

    Hi,
    To update the Bill Key date in ERDK,we implemented the BADI ISU_DEF_BILL_PERIOD and inside it,under method SET_BILLING_PERIOD_INV we made the code changes to update the billing key date.
    Thanks,
    Shreeraj

  • Billing document number skip

    Dear Sir,
    In some cases Billing document number (VF01) generate, (with reference to delivery number) but at the time create Excise Invoice against same billing document number, system given error "Billing document number does not exit".
    & after that  system will be allowed to create the billing document against same delivery.  please help
    Regards
    BK GAIKWAD

    Suitable suggestion has already been given.  May be you can have a look at the following note which may help you.
    Note 19050 - Gaps in document number sequence for billing docmts
    Alternatively, you can execute report RFVBER00 which explains on document numbering gaps.  Try this report in development before executing in production client.
    G. Lakshmipathi
    ps:- Please spell the name correctly

  • EA16 manual billing  - customer fields

    Hello.
    Could you help me somebody? I want to add a customer field to transaction EA16. I need to fill a new customer fields in manual billing document as information . And this information  next time to transfer to BW from this manual billing.
    Is some suitable function module, enhancement for adding a new field to  manual billing document?
    Thank you very much.
    Best regards
    Ingrida

    I haven't used this exit myself, but it looks like it may do the trick.
    EXIT_SAPLV60B_008 (SMOD enhancement SDVFX008)

  • Collective Billing Document Problem

    maintain billing due list status 1 multiple delivery invoices click collective billing document
    I'm new to this transaction, but in VF04 when I select 4 delivery invoices and click "collective billing document", I get a status 1, but it says that it was successfully processed (green check mark).
    I just want to know where I can find this final collective invoice?
    Thanks in advance.

    Hi,
    Go to VL03N, select any of the deliveries used to Create the collective invoice, Click on Document flow Button, You can see the Collective invoice number as the succeeding document in document flow. 
    Regards
    Vinod

  • How to Create Excise Invoice (J1IIN) with order related billing document

    Dear Experts,
    Is it possible  to Create Excise Invoice (J1IIN) with order related billing document? How? please guide
    Regards
    BK GAIKWAD

    Sir,
    We have make the supplementary Invoice (Debit Note) as per below process
    1) Create sales order_VA01
    2) Create billing document_VF01_with reference to sales order
    3) Create Excise Invoice With J1IS (Other Movement) It is manually job & due to heavy work load (create 200 invoice  per day) it is not possible to do manually.
    Hence we want to create excise Invoice with J1IIN instead of J1IS, any alternative solution for that?
    Regards
    BK GAIKWAD

  • How to print the invoice(Billing document) using program RSNAST00

    Hi,
      I want to print the invoice using the program RSNAST00,
    but when i fill in selection screen with the following details,
    Output Application : V3
    Object Key : Billing Document Number
    Output Type : ZPFM
    Transmission Medium : 1
    But it is throwing an Information Message "0 outputs were processed in total (0 successfully,0 incorrectly)
    So please guide me, what are settings i have to do and what abap code i have to write to overcome this error.
    Regards,
    Shasiraj.C

    Hi,
      As you told I am using the function module RV_MESSAGE_DIALOG in my program when I directly execute my program its not printing invoice,but when i keep the break point and execute a pop up comes in which i click on the PRINT button that time it is printing the invoice.
    But I dont want to click on Print button manually, my code should automatically take care of printing also.
    Can guide me in this issue.
    Regards,
    Shasiraj.C

  • Create Excise invoice(J1IIN) document while creating billing document using bapi BAPI_BILLINGDOC_CREATEMULTIPLE

    Dear Experts,
    My scenario is:
    We have batch split scenario, where the parent line item of billing document has 0 quantity and its subsequent item (item with batch number) holds actual quantity data.
    When we create billing document using VF01 against delivery document, system creates billing document along with excise invoice document (J1IIN Document). And in excise document contain same number of line items that of billing document. Please see the below attachment: 
    Biiling document screen shot:
    While creating billing document, the J1IIN Document created automatically. Below is the screen-shot for the same.
    Now the issue is:
    When we create billing document using BAPI: BAPI_BILLINGDOC_CREATEMULTIPLE system creating only billing document and not creating excise invoice document.
    When we create excise document manually using J1IIN the zero quantity line items are excluded in excise invoice document.
    Please see the below screen-shot for the same; The z quantity line items are missing.
    We want excise document to be created while creating billing document using BAPI BAPI_BILLINGDOC_CREATEMULTIPLE. Or is there any other BAPI for the same purpose.
    Customization is also maintained for creating excise invoice document automatically.
    Regards,
    Rajesh Sadula.

    HI
      Pricing will be carried basing on the pricing
    procedure.
    Case1: Prices will be carried out automatically if
    necessary condition records are maintained for the
    condition type.
      For this you can go to Sales Order-> Item Conditions
    In the screen you can click on command button Analysis,
    which gives you the list of condition types associated
    to the pricing procedure. By clicking on the condition
    type you can know the action that has taken place.
    Case2: Manually forcing prices for Items.
      To do this, you have to populate ORDER_CONDITIONS_IN &
    ORDER_CONDITIONS_INX. Also note to identify the item
    numbers, you manually pass the item number for each item
    in the sales order, use the same item number for
    populating conditions.
      Parameters required:
    ORDER_CONDITIONS_IN:
      ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
    ORDER_CONDITIONS_INX:
      ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
       Hope the above info helps you. Do revert back if you
    need more info.
    Kind Regards
    Eswar

Maybe you are looking for