IOS8.1 maps new favorites not storing address and old wrong / no address

Since updating to iOS8.1 on an iPhone 5s, Yosemite 10.10, iTunes 12.0.1 I have discovered that:
i)   My existing Favourites as imported from iOS7 under Bookmarks have randomly:
     a) Not found the address
     b) Found a random address that relates to the Favorite name but not to the address originally bookmarked.
ii)   When I add a new Favorite and then try to use it the Favorite name appears briefly in the search bar and then goes blank, as if no address was associated to the Favorite.
(This suggests to me that my Favorite list is corrupt and will not update etc)
I have been into an Apple Store and they verified I was creating the Favorite correctly and they were amazed as I.
To try and remedy this I have now done a clean install of iOS8.1 and cleared all Recents and all Favorites bar one and when adding a new Favorite the same as ii) above happens.
Any other ideas?
Regards,
Simon
P.s I had a similar problem with iOS8.0 but ignored it...

An update..
This issue I subsequently discovered applied to my iPad 2 as well as friends using iPhone 4s, 6 and 6 Plus.
Interestingly if you create a new favourite that you give a Title that is well known e.g. Buckingham Palace it will pause briefly and find the location, suggesting although it can't find the location you specified it then uses the Title to search. (This may explain how I was getting the wrong location originally).
I have been through Apple support chat, been referred to a higher level / call back and finally had the issue referred back to "Engineering".
I sent them videos of the problem and finally went into the Apple Store in Regent Street London and replicated the issue on a display iPhone 6. Which suggests nothing to do with my personal settings / hardware / AppleID etc.
I had daily call backs for three days and prompt email correspondence (excellent customer service from Ireland) whilst Engineering looked into the issue and finally heard they had managed to replicated the problem and thanked me for raising it.
I suspect this means the new feature may be reversed out in an upcoming release but no fix for now .
Hope this helps
Regards,
Simon

Similar Messages

Hey.. when i upgred to cc 2014 all my old projects and the new dose not open anymor and they r whait and have no logo of the program .. like AE or PR ..win 7 , cc2014

hey.. when i upgred to cc 2014 all my old projects and the new dose not open anymor and they r whait and have no logo of the program .. like AE or PR ..win 7 , cc2014

You originally posted on a thread that really wasn't related to your problem, so I branched the discussion.
Check the Windows System Event Viewer to see the details of the crash, most importantly the name of the faulting module.
Most crashes on Open or Save are due to OS bugs (especially on MacOS) or bugs in third party extensions to the OS open and save dialogs.

When I sync my iPod to my MacBook through iTunes new events do not show up and old events are not deleted. I am using Snow Leopard and not iSync.

I am using Snow Leopard on a MacBook. I have an iPod touch 3G. I do not use iSync it Mobile Me. When I sync my iPod through iTunes new events on my iPod do not show up on my Mac and old events do not delete. I have read help instructions that include deleting the data on the iPod. The iPod has the correct data and the Mac does not so I have not followed those instructions. I need help as the only reason I bought the Mac was to be able to sync, back up, view and print my calendar. Currently it is useless. If only Apple could have learned from the elegance of the Palm software.

Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

New ipod not doing what the old one did

I just received my new 6 Gen nano replacement in the recall. I think it's great of Apple to give me a brand-new ipod in exchange for an old one, but.....something isn't right. The first problem I found was that the new nano doesn't store tracks within playlists in the same order as in iTunes. I tried 'Copy to play order' both on the iTunes smart playlist and on the playlist after uploading it to nano, but the nano lists things bunched together in groups, with newer files first - no good for listening to eg radio dramas with multiple episodes that need to be listened to in order. Then I tried making a new smart playlist with the contents of the original smart playlist, but that copies onto nano in reverse order. So I tried reversing the order of the new playlist, but the order in nano doesn't change, which is weird.
All I want is a playlist that lets me listen to stuff in the order I want to listen to it in, without having to stop what I'm doing at the end of each track to manually select the next one. Is that not possible with the 6 Gen nano? And if not Why On Earth Not? I would have thought it was a pretty basic function.
Another problem is that play count seems to have disappeared. I set up my smart playlist to include only files with a play count of 0, so that when I connect the nano, things I have already listened to are updated and automatically removed from the playlist. Yet all the stuff I listened to yesterday is still marked as not having been played.
I would have assumed that a newer model would be easier/more convenient to use than an older one, but this is definitely several steps backward - or is there something wrong with my new nano?

OK, after lots of messing around I finally got a playlist to play in the right order.
First, automatic sync doesn't work, it has to be manual which is a bind.
The smart playlist I want to listen to has tracks selected by genre, plus 0 plays, arranged in order manually. No matter what I do, I can't get this playlist to behave as I want.
I created another smart playlist selected by 'playlist is the other playlist'. I select 'copy to play order' on this playlist, manually upload it to the nano and select 'copy to play order' on it in nano too. The playlist has an exclamation mark next to it indicating that it is not linked to an existing playlist. Ignore.
Sync the nano, and the playlist is in the correct order.
Play count still seems to be a bit iffy, though. Stuff I know I've listened to stil shows up with 0 plays.
Please Apple, make the software for the 6 Gen as user-friendly as it was for the 1st-gen. With that everything was automatic.

Downloading Maps - New folder not recognised

I have been trying to download maps to my N95 without any luck. After creating new folders on my phone in both the phones HD and also the memory card it says the folder does not exist.
Anyone have any ideas?
Cheers

Hi pearcy
Maploader application is used to download regional maps with phone in "data transfer" mode.
In Nokia Maps application connection through either WLAN or Network provider may be set to "as needed" or "never". To benefit from A-GPS feature or to search to full postcode level, an active connection is needed however.
Happy to have helped forum in a small way with a Support Ratio = 37.0

Updating new PC with stored music from old PC

Is there a way to upload my music from my ipod to my new PC? I don't have an external hard drive that I stored it on before I got my new PC. Any recommendations other than using an external hard drive next time?

All music bought in iTunes can be copied to iTunes by using File->transfer purchases, for all other media, there is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

I pressed the wrong button when setting up my new iphone - i clicked set it up as a new iphone not restore from my old one - now i have lost my texts and my notes! help?from my

When i synced my new iphone to my pc i clicked the wrong button - instead of restoring it from my old phone's last backup i clicked set up as new iphne - now it appears all my old texts and my notes have gone. Any ideas how I can get them back?

When you plug it into iTunes - it will show on the left side of the screen. Right click on it, and you will have a list of restores to use. Pick the one you want, and it will pull all of that data. It worked on mine...

New classic not recognized(?) and won't sync

Recently lost my original classic 80gb and bought a used one on Ebay to replace it. Just connected it to iTunes. (It was cleared by previous owner - had nothing on it.) When I connected it to my PC, the driver installed and iTunes opened. In iTunes only "Lisa's iPod" is listed. This is the designation given to my old iPod. I was surprised that it didn't ask me about a new iPod or something. I attempted to sync. The first time, though I got error messages about several individual songs not being synced, it did tell me that the sync had finished. When I checked the ipod though, only a handful of songs was on it. I tried it again with the same result. When I selected Lisa's iPod (the only one listed in the devices), it showed that there were 3976 songs occupying 29.86gb of space. But when I clicked on "On this iPod" it showed only 122 songs...suggesting that "this iPod" was different from "Lisa's iPod" despite only having "Lisa's iPod" listed as a selectable device. The third time I tried to sync it, I got an error message which said, " The ipod "Lisa's iPod" cannot be synced. An unknown error has occurred. (-1303)." When I disconnect the new ipod "Lisa's iPod" disappears from the iTunes list....it shows no iPod connected. Only options "Open iTunes automatically when ipod is connected" and "Enable disc use" are checked. I'm using iTunes version 11.1.5.5. I'm completely baffled. Suggestion?

UPDATE: I uninstalled and reinstalled itunes. I still got a bunch of different error messages whilte trying to sync but now when I click on "On this iPod" it says there are 407 songs on it. But when I look at the song list on the actual iPod, there's only 101 songs.
I use my iPod for work and REALLY need this to work. No one has any ideas?

Customer service does not follow through and gives wrong information

First of all, i would like to say that i USED to be a very happy Verizon customer.
Things started changing when i had to move.
I first tried to use the online move/transfer my service function. But the system did not recognise my new address.
then i proceeded to make 3 seperate calls to the customer service which in the end, still gave me the information that they did not service my new address.
I had no choice but to rely on that information given on the last call to terminate my services with verizon.
So, after giving my notice to terminate the services, i had no choice but to engage comcast. the day after comcast came to install services for me, i noticed that my next door neighbour had managed to get verizon installed in their home!
And my neighbour is staying in the next unit of our duplex.
I really like Verizon's products but your customer service is much to be desired. After 3 calls, 2 of which had said service tickets were created to help me check if my new address could install verizon services, and would call me back within 3 working days, but never called back. And the last call ending with a 3 way conversation with a technical personnel, customer service and myself, stating that verizon was not available at my location. I am so disappointed that this is what you do to keep customers. especially when Verizon definately provides services on my street.

Re Wedding
Re LaughingJohn.
Finally managed to get put through to "Priority Care" (who then admitted she was tech help, and put me through to PC!!!!!!) to discuss reimbursement/compensation. I agree with both points how misinformation is given just to get the customer off the phone so that they can take another call to keep the "call waiting" time down. They are so heavily scripted ( not their fault I am sure) that they prattle on with it and don't truly listen to what the issue/problem is. And to have 3 sets of PC Managers deal with it is a joke.
Today they offered me (drumroll please)........... 4 days reimbursement !! which works out at £3:33. I kindly pointed out the WHOLE story again emphasising the;
LIES
INCOMPETENCE
LACK OF CUSTOMER REGARD
THE INABILITY TO CONFIRM AN APPOINTMENT AS 8-1PM OR 1-6PM etc etc
As well as the £85 in lost wages for the 2 afternoons off work.
I then asked him again if that the £3:33 sounds as a fair offer, 25 minutes pass repeating my self over and over again pointing out that BT as the telecommunications company, has been put to shame and contacted more by the customer than Bt contacting the customer.
"I agree with you Mr Bardsley, and seeing as you have had a "not so good" experience (understatement of the year) I am willing to offer you £10 pounds, I am not really meant to sir, but on this one occasion I can"
I told him I was looking for AT LEAST 1 months free Infinity for the hassle (not expecting to get blood out of a stone) and was told "No sir". Can BT admit they dropped the ball and meet me half way then? and give me half price then for nexts months fee?
"because you have called so many times sir and had a little bit of a bad experience (do they think that repeating this I will some how agree that the world is flat?) I can go to half price for you sir"
Not the result I was after, but still a result.
I just don't get how such a large company can get it so devastatingly wrong.

When i attempt to dl itunes10.0 everything installed but itunessupports, updates quick time not itunes exe and old version of bonjour can't be removed

itunes won't completely install 10.0 and ipod touch is stuck in recovery mode

Hi Barbara,
I had a similar problem recently and using the "more like this" feature I discovered an answer. To a problem posed by Holo7, who like myself was a newbie on this platform, b noir proposed a solution to Holo7's problem that also worked with my problem. It involves downloading a version of MS Windows Instal Cleanup and using it to completely remove all traces of the old version.
If you look at my problem (follow OldGit66) and the link to Holo7's problem then you will find b noir's answer which I think may help you. I am new around here so you might want to wait for one of the higher status correspondents.
Regards
John

Pictures on Home Page of blog not right, duplicating and in wrong place

I have a food blog, upgraded to 09. Now, some of the pictures are repeating on home page and don't match entries. When you click on entry from home page, it's fine. Started in past week.
www.spinachtiger.com

When I had done a complete upload of one of my sites, call it site A, everything looked alright.
Then I still had a small background issue on one of my old sites, say site B; part of the background was not of the right colour. When I did a complete publish of site B, I got an error message that one image object ....png could not be saved. There is no way to know which image that would be. So there is but to continue the publish. And indeed the little background issue was solved now.
However, when I started iWeb again, I got a list of missing images. Guess where those images were missing. In site A, the whole blog summary page was empty. So actually fixing/publishing site B resulted in a bad site A blog page.
So I did my usual trick again (disable/enable comments) and lo and behold there my images popped up again. As the whole entries folder was now red, I thought it better to publish this part again. I checked the rss feed and this was still ok.
Conclusion: there is unwanted interference over several sites.
If you only have one site with one blog you won't have this kind of trouble. But still it is a matter Apple should see to. It severely limits the use of iWeb, in particular blogs.
I'll let you know how things develop, when I start adding entries to my other site/blog C.

Product interchangeability not considering stock of old product

Testing Product interchangeability with Location as MRP areas
created chain with new item as succssor product and old as the presecessor with DIRECTION --->FORWARD
After Running OPTIMIZER with Both the products and all Locations , OPTIMIZER is ordering new item and not the old item even though there is huge stock on hand of the old item.
please let me know if the optimizer will select new product irrespective of the old stock on hand.

Hi,
Product A is to be superseded by product B in location C.
There is no remaining stock of product A at location C. If demand is received for product A, the heuristic would transfer the demand to product B.
However, the optimizer checks whether there is any stock of product A in other locations of the model.
For instance, if there is still sufficient stock at location D, the optimizer checks the costs for transferring the stock of product A from location D to location C. If this is the most cost-effective solution (because storage costs at D are higher than the costs for transporting to C, for example), the optimizer plans the stock transfer from D to C. The demand for product A is then covered by the transferred stock.
Request you to check in your case whether this is the case.
Note: The optimizer does not calculate costs for interchanging products at the same location.
Thanks,
nandha

How do I see a list of all my Apple Mail contacts. I do not use address book. I just want to see all the email addresses stored on my Mac

Hi All,
I have been using Mail for the past three years without need to send a regular mailing list mailout.
I now need to send group emails and all I want to do is browse my contacts aquired over the last three years to create a list. I have not used Address Book for anything other than phone contacts so please do not point me in that dirrection.
There must be a list of all email contacts stored somewhere on the Mac that I can look through. It is an almost impossible task to do this by browsing my inbox/sent folders.
Hope you can help and thanks in advance!
Best
Adam

0. find the user id.
    a. log in as that specific user.
    b. run terminal
    c. type "echo $UID"
    d. write down the user id that will be displayed
1. Go to the finder
2. go to the user home folder
3. click the box with the magnifying glass (upper right corner of the window)
4. type .jpg
5. a menu will pop under the magnifying glass box, select "jpg image"
6. click the "plus" sign that's displayed to the right of the word "save"
7. two pull down menus will appear, select "other" from the first one
8. a new window will pull down, scroll to "owner" and select it
9. back in the original window type the user id (a number) to the right of "owner" "equals"
Hope this helps

Email addresses popping down that I have not stored in my address book. How do I delete them?

When I start writing a letter on a new email, a pop down menu with addresses show some "contacts" or email addresses that I have not stored or used.
How can I get rid of them? This is on the mail app. that comes with the iPad.
Any input anyone? Thanks.

Something really strange is going on here. First, I went to do the same comparison that you did. In my case, I intended to compare Mail on my original iPad with Mail on my Mac. I was completely unable to locate the "Previous Recipients" list on the iPad. Where is it?
I did attempt to do a lesser comparison by creating a message on the iPad and putting "a" in the "To" field. Up popped several dozen recipients that begin with the letter "a." I was unable to match the listing up with the listing in the Mac on a one-for-one basis (because the sorting is different) but I did locate several addresses in the iPad that are unquestionably not in the Mac. HOWEVER, the real confusing part is that I know for a fact that I have not sent any emails to these individuals for over five years (and, obviously, I could not have used the iPad)! One is a former manager at a company that I worked for ten years ago. Another is the contact at the medical insurance company for the same employer.
The items in the Mac listing were equally weird. Many, of course, were legit but there were several that I know for a fact that I had absolutely never sent any messages to these recipients. One that stood out is an address with the name "Bladder Cancer Lawyer" and it was allegedly "last used" several weeks ago. A message to such an individual is not something that I'm likely to forget (especially rather quickly).
Right now, I am thoroughly confused. Just for giggles, I'm going to delete the entire list on the Mac and see what happens. Actually, I'm going to stall for a while just in case you come up with another thought.

I loaded what I guess is the new version of Firefox and it completely changed my whole task bar. I don't have my Norton Logins with stored passwords, and it's hard to find my favorites. Help get it back to how it was.

I loaded what I guess is the new version of Firefox and it completely changed my whole task bar. I don't have my Norton Logins with stored passwords, and it's hard to find my favorites. Help get it back to how it was.

Credit Tony E
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data. See https://support.mozilla.com/kb/Uninstalling+Firefox
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

IOS8.1 maps new favorites not storing address and old wrong / no address

Similar Messages

Maybe you are looking for