IP local pool range not accepted
I have a client set up with this range:
ip local pool ClientVPN 176.16.11.210-176.16.11.241
Somehow it is unable to give an IP to the client... If i change the range:
ip local pool VPNproduction 176.16.11.150-176.16.11.160
It works fine... What could be the problem
Actually it is connected to clientvpn but still doesnt work.
ip local pool VPNproduction 176.16.11.150-176.16.11.160
ip local pool ClientVPN 176.16.11.210-176.16.11.241
Doesnt work:
vpngroup user1 address-pool ClientVPN
vpngroup user1 dns-server DC01
vpngroup user1 default-domain apollo
vpngroup user1 split-tunnel developers_splitTunnelAcl
vpngroup user1 split-dns ############
vpngroup user1 idle-time 18000
vpngroup user1 password ********
Works:
vpngroup SMSman address-pool VPNproduction
vpngroup SMSman dns-server DC01
vpngroup SMSman default-domain apollo
vpngroup SMSman split-tunnel SMSman_splitTunnelAcl
vpngroup SMSman split-dns ################
vpngroup SMSman idle-time 18000
vpngroup SMSman password ********
Similar Messages
-
SMTP not accepting realys from OUTSIDE the local network
I come into the office today to find my SMTP server not accepting realys from the employees that work outide the local network.
we just keep getting "relay access denied" errors
here is postconf -n
running tiger server 10.4.7
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
localrecipientmaps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
messagesizelimit = 0
mydomain = memphisdns.com
mydomain_fallback = localhost
myhostname = memphisdns.com
mynetworks = 192.168.0.0/24,127.0.0.0/24,216.37.68.34
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdtls_keyfile =
unknownlocal_recipient_rejectcode = 550
Any ideas?here is postconf WITH authentication turned on
which didnt work
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
localrecipientmaps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
messagesizelimit = 0
mydomain = memphisdns.com
mydomain_fallback = localhost
myhostname = memphisdns.com
mynetworks = 192.168.0.0/24,127.0.0.0/24,216.37.68.34
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdpw_server_securityoptions = login,plain,cram-md5
smtpdrecipientrestrictions = permitsasl_authenticated,permit_mynetworks,reject_unauthdestination,permit
smtpdsasl_authenable = yes
smtpdtls_keyfile =
smtpduse_pwserver = yes
unknownlocal_recipient_rejectcode = 550 -
Exchange on Local LAN prompting password and not accepting
I have users that have Exchange email account setup on their iPad/iphone(ios5,6,8) (Wi-Fi only) and it works fine when they are away from the company. When they are connected to the companies Wi-Fi and is on the same local subnet as the Exchange server they can't connect to the server. They receive this error "Password is not correct. Enter a password for Exchange account" We tried to enter the password multiple times in multiple devices but doesn`t accept. Does anybody have any ideas?
-Exchange 2013
-DNS win 2012, We have DNS records for local and global domain names.
-We tried with iphone 4s, Ipad air2, iphone 5
-We don`t have any problem with Laptops (win 7). They are using Outlook anywhere settings, too
Thank you very much in advance.Sometimes they work fine, doesn`t ask password but some days it is asking password and not accepting.
-
Exchange on Local LAN prompting password for IOS devices and not accepting
Hi,
I have users that have Exchange email account setup on their iPad/iphone(ios5,6,8) (Wi-Fi only) and it works fine when they are away from the company. When they are connected to the companies Wi-Fi and is on the same
local subnet as the Exchange server they can't connect to the server. They receive this error "Password is not correct. Enter a password for Exchange account" We tried to enter the password multiple times in multiple devices but doesn`t accept. Does
anybody have any ideas?
-Exchange 2013
-DNS win 2012, We have DNS records for local and global domain names.
-We tried with iphone 4s, Ipad air2, iphone 5
-We don`t have any problem with Laptops (win 7). They are using Outlook anywhere settings, too.
Thank you very much in advance.Sometimes they work fine, doesn`t ask password but some days it is asking password and not accepting.
-
7942G IP phone does not upgrade and does not accept locale
Hello everyone!
I stumbled upon a rather strange behavior on a CP-7942G IP phone. It is a new phone, which I have myself unpacked from the box, along with 2 others.
Now, the problem is, this particular phone did not load the user-locale, specified in the telephony-services config on the CUCME and did not display the time correctly:
cnf-file location flash: cnf-file perphone user-locale RU load CME-locale-ru_RU-Russian-7.0.1.1.tar user-locale 2 U1 RU network-locale RU
While trying to debug what's going on, I eventually unpacked a second phone (same model) and got the same result: the user-locale was English, ASCII. I have downloaded the latest firmware update from the Cisco.com website (version 42.9.3.1.SR2.1S as opposed to previous 42.8.4.2S). Changed the config and restarted the second phone. I has updated it's firmware, restarted and got all settings correctly (Russian, UTF-8, display time).
The first phone though - the one it has all started with - still has the same problem. I tried to factory-reset it during it's power-on cycle, it tried to update, but looks like it didn't. This is what is shows in the Device Information section on the web-interface:
App Load ID jar42sccp.8-4-1-23.sbn Boot Load ID tnp42.9-3-1-57.bin Version SCCP42.8-4-2S.bin
Version SCCP42.8-4-2S
I'm not a Cisco pro, but looking in the console logs it seems that the phone does try to apply the locale settings, but reverts to default for some reason (look for text in BOLD):
|=== Syslogd === Thu Sep 26 10:13:42 2013
====================================================
NOT 10:13:42.736527 JVM: Startup Module Loader|cip.midp.rms.l:? - loaded entry: _cip_properties.db=/flash0/RMS/appdb/_cip_properties.db
NOT 10:13:42.737816 JVM: Startup Module Loader - Deletion of file Successful/flash0/RMS/appdb/_cip_properties.dbk
NOT 10:13:42.739051 JVM: Startup Module Loader - Deletion of file Successful/flash0/RMS/appdb/_cip_properties.dbk
ERR 10:13:44.409247 JVM: Startup Module Loader|SystemManager:n/a - Encountered Property Exception while getting: device.system.targetmodules
NOT 10:13:44.483161 JVM: NativeIO assumed to be integrated into the VM
DBG 10:13:45.112916 lcd_open: return success!
NOT 10:13:47.776918 JVM: Font.addRes() owner=class cip.g3.r2d.y this=Font name=Monospace.font size=13 sty
NOT 10:13:47.777555 JVM: leFlags=0 tabWidth=0 tabTol=0
NOT 10:13:47.803214 JVM: Font.addRes() owner=class cip.g3.r2d.y this=Font name=Monospace.font size=17 sty
NOT 10:13:47.803814 JVM: leFlags=0 tabWidth=0 tabTol=0
NOT 10:13:47.855490 JVM: Font.addRes() owner=class cip.g3.r2d.y this=Font name=Unicode.font size=19 style
NOT 10:13:47.856090 JVM: Flags=0 tabWidth=0 tabTol=0
NOT 10:13:47.906921 JVM: Font.addRes() owner=class cip.g3.r2d.y this=Font name=Unicode.font size=17 style
NOT 10:13:47.907565 JVM: Flags=0 tabWidth=0 tabTol=0
NOT 10:13:47.958760 JVM: Font.addRes() owner=class cip.g3.r2d.y this=Font name=Unicode.font size=18 style
NOT 10:13:47.959358 JVM: Flags=0 tabWidth=0 tabTol=0
NOT 10:13:48.009978 JVM: Font.addRes() owner=class cip.g3.r2d.y this=Font name=Unicode.font size=15 style
NOT 10:13:48.010602 JVM: Flags=0 tabWidth=0 tabTol=0
WRN 10:13:48.160504 JVM: Startup Module Loader|Skin:? - Font reference not found for UIComponent=kemtext
NOT 10:13:48.317399 JVM: MediaTermination assumed to be integrated into the VM
NOT 10:13:48.821965 JVM: libMT:start SignOn()
NOT 10:13:48.824926 JVM: *** VIEO should already be running. NO? Start "/ubin/vieo &" now ***
NOT 10:13:48.825972 JVM: libMT: send _MTStart...
NOT 10:13:48.831661 JVM: LibMT (vieoProcess.c): registered VIEO callbacks
DBG 10:13:49.820548 audev: audioHwInit,,,
DBG 10:13:49.820933 audev: audioHwInit.
NOT 10:13:49.886879 DSP: _dspdvrStart ok, DSP bootup completed successfully
NOT 10:13:49.894065 DSP: DSP Tone/Ring DSP initialization completed successfully
NOT 10:13:49.895646 DSP: dspdvrinitEnableAudioOutput enabled = 1
NOT 10:13:49.896197 DSP: DSP INIT-*** DSP_STATE_READY***
NOT 10:13:49.898130 JVM: LibMT: MediaTerminationStart OK!
NOT 10:13:50.010519 JVM: Startup Module Loader|ComponentController:? - Initializing MVC comp module's trace mechanism
NOT 10:13:50.123210 JVM: TftpNative assumed to be integrated into the VM
NOT 10:13:50.574189 JVM: HTTPService assumed to be integrated into the VM
WRN 10:13:50.879507 SECD: WARN:getCertInfo: ** phone has no LSC
NOT 10:13:52.372683 DSP: configurationNumber 1, enabled 0
NOT 10:13:52.379534 DSP: mtSetDeviceBandwidth: Wideband Headset - deviceWideband=0
NOT 10:13:52.382165 DSP: mtSetDeviceBandwidth: Wideband Handset - deviceWideband=2
NOT 10:13:52.384033 DSP: mtSetG722Codec: g722enable=0
NOT 10:13:52.402407 DSP: configurationNumber 0, enabled 0
NOT 10:13:53.353620 JVM: ENTERING loadSystemProperties
NOT 10:13:53.355397 JVM: EXITING loadSystemProperties
WRN 10:13:53.451585 JVM: Startup Module Loader - *******MIDlets Not allowed in REL load*******
NOT 10:13:53.452824 JVM: Startup Module Loader|cip.midp.midlet.MIDletManager:? - Initializing MIDletManager ...
NOT 10:13:53.454023 JVM: Startup Module Loader|cip.midp.midlet.MIDletManager:? - Initializing PushRegistry ...
NOT 10:13:53.950401 CDP-D: configSelectVLAN: 3 OP_USE_CDP:2 oper:101 cdp:101 lldp:4096 admin:4096 mac:0:25:83:85:73:18
NOT 10:13:53.951035 CDP-D: CDP OP: clear cross ref
NOT 10:13:53.951487 CDP-D: getCdpExtaInfo: OP:2 Cos:0 Trust:0 lldp.idxOfInterest:-1
WRN 10:13:53.952071 CDP-D: cdpSetCos T:0 C:0
NOT 10:13:53.952540 CDP-D: CosTrust: 0 0
NOT 10:13:53.958093 CDP-D: vvlan changed --> New:101 old:4096 101
ERR 10:13:53.958658 CDP-D: setVVLANConfig VVLAN CHANGED --> NEW:101 OLD:4096 101
NOT 10:13:53.963511 CDP-D: vlan Configured --> New:100 old:4096 :100
NOT 10:13:53.964616 CDP-D: Sent SIGNINFO & SIGIPCFG
NOT 10:13:53.965261 CDP-D: cdpSetDhcpEnableFlg: SIGNINFO
NOT 10:13:53.967656 JVM: setSystemProperty() name=microedition.hostname value=SEPD0C789154FDC
NOT 10:13:53.969538 JVM: setSystemProperty() name=microedition.locale value=en
NOT 10:13:53.971370 JVM: setSystemProperty() name=microedition.encoding value=ASCII
NOT 10:13:53.972995 JVM: setSystemProperty() name=microedition.platform value=CP-7942G/7.0.1
NOT 10:13:53.974623 JVM: setSystemProperty() name=com.cisco.device.settings.config.userid value=
NOT 10:13:54.031701 JVM: Startup Module Loader|cip.midp.pushregistry.f:? - Starting MIDP PushRegistry ...
NOT 10:13:54.032873 JVM: Startup Module Loader - Deletion of file Successful/flash0/RMS/appdb/MAP1
NOT 10:13:54.034091 JVM: Startup Module Loader|cip.midp.pushregistry.f:? - MIDP PushRegistry started successfully.
NOT 10:13:54.035283 JVM: Startup Module Loader|cip.midp.midlet.MIDletManager:? - Initializing MIDP MemberFilter ...
NOT 10:13:54.036494 JVM: Startup Module Loader|cip.midp.midlet.MIDletManager:? - MIDletManager initialized.
NOT 10:13:54.259788 JVM: Creating new StateMachineThread
NOT 10:13:54.409562 PAE: SIGIPCFG received...
WRN 10:13:54.484755 SECD: WARN:getCTLInfo: ** phone has no CTL
WRN 10:13:54.488679 SECD: WARN:getCTLInfo: ** phone has no CTL
NOT 10:13:54.497820 DHCP: DHCP enabled...
NOT 10:13:54.499483 DHCP: dhcpSendReq: status 0x12300000
NOT 10:13:54.500511 DHCP: Sending Request...
ERR 10:13:54.503878 INETD: Local connect failed: 2
NOT 10:13:54.526871 CDP-D: catchipcfg:getdhcpinfo IP:0 domain: chngVal:0
NOT 10:13:54.528288 CDP-D: catchipcfg:getdhcpinfo IP:0 domain: chngVal:0
NOT 10:13:54.529090 PAE: SIGIPCFG received...
NOT 10:13:54.530615 DHCP: Enable
NOT 10:13:54.537357 DHCP: dhcpSendReq: status 0x12300000
NOT 10:13:54.537887 DHCP: Sending Request...
NOT 10:13:54.538902 DHCP: ACK received
NOT 10:13:54.539424 DHCP: Succeeded
NOT 10:13:54.541514 ESP: send ADMIN, logging = 1, shell = 0, ipconfig = 1
NOT 10:13:54.545277 tftpClient: request server 0 ---> 10.80.129.1
NOT 10:13:54.552395 DHCP: IP Address -- 10.80.129.12
NOT 10:13:54.552928 DHCP: Subnet Mask - 255.255.255.128
NOT 10:13:54.553372 DHCP: Default Gwy - 10.80.129.1
NOT 10:13:54.576800 CDP-D: catchipcfg:getdhcpinfo IP:a50810c domain: chngVal:1
NOT 10:13:54.578452 PAE: SIGIPCFG received...
NOT 10:13:54.592996 tftpClient: request server 1 --->
NOT 10:13:54.665767 tftpClient: request server 0 ---> 10.80.129.1
NOT 10:13:54.666679 ESP: server 0 = 10.80.129.1
NOT 10:13:54.670348 tftpClient: request server6 0 ---> ::
NOT 10:13:54.674687 tftpClient: request server 1 --->
NOT 10:13:54.675609 ESP: server 1 =
NOT 10:13:54.677936 ESP: send ADMIN, logging = 1, shell = 0, ipconfig = 1
NOT 10:13:54.683752 tftpClient: request server6 1 ---> ::
ERR 10:13:54.689776 JVM: GETHOSTBYNAME: Empty Parameter
WRN 10:13:54.719514 JVM: Startup Module Loader|NetUtil.traceIPv4DNSErrors:? - DNS Unknown Host
NOT 10:13:54.724673 SECD: updateCTL: starting CTL update
NOT 10:13:54.726696 SECD: ctlRequestFile: Socket 7 connected to /usr/tmp/tftpClientSock
NOT 10:13:54.727408 SECD: ctlRequestFile: Request CTLSEPD0C789154FDC.tlv
NOT 10:13:54.729751 tftpClient: tftp request rcv'd from /usr/tmp/ctlSock, srcFile = CTLSEPD0C789154FDC.tlv, dstFile = /usr/tmp/CTLFile.tlv
NOT 10:13:54.734219 tftpClient: auth server - tftpList[0] = ::ffff:10.80.129.1
NOT 10:13:54.734742 tftpClient: look up server - 0
WRN 10:13:54.736310 SECD: WARN:lookupCTL: CTL update in progress, no old CTL, assume TFTP NONSECURE
NOT 10:13:54.738353 tftpClient: secVal = 0xa
NOT 10:13:54.738948 tftpClient: ::ffff:10.80.129.1 is a NONsecure server
NOT 10:13:54.739405 tftpClient: temp retval = SRVR_NONSECURE, keep looking
NOT 10:13:54.739866 tftpClient: retval = 10
NOT 10:13:54.740746 tftpClient: Non secure file requested
NOT 10:13:54.749039 TFTP: [31]:Requesting CTLSEPD0C789154FDC.tlv from 10.80.129.1
NOT 10:13:54.752921 TFTP: [31]:Error --> No such file
NOT 10:13:54.758291 SYSMSG: pid 31 (/sbin/tftpd) Normal Exit, status = 2
INF 10:13:54.758326 runtime = 0.010 secs
INF 10:13:54.758344 user cpu = 0.001067950 secs
INF 10:13:54.758361 system cpu = 0.003620740 secs
INF 10:13:54.758374 child user cpu = 0.000000000 secs
INF 10:13:54.758388 child sys cpu = 0.000000000 secs
INF 10:13:54.758406 sys interrupts = 0.000427430 secs for 6 interrupts
INF 10:13:54.758427 total cpu = 0.004688690 secs ( 0% utilization )
NOT 10:13:54.761297 SECD: ctlRequestFile: tftp Status 2 rcv'd
NOT 10:13:54.762017 SECD: updateCTL: finished CTL update
ERR 10:13:54.762581 SECD: EROR:updateCTL: ** had NO CTL and CTL tftp FAILED** tftp-err 2
NOT 10:13:54.765755 tftpClient: request server 0 ---> 10.80.129.1
NOT 10:13:54.766486 ESP: server 0 = 10.80.129.1
NOT 10:13:54.768900 tftpClient: request server 1 --->
NOT 10:13:54.769575 ESP: server 1 =
WRN 10:13:54.788934 SECD: WARN:getCTLInfo: ** phone has no CTL
NOT 10:13:54.801182 tftpClient: tftp request rcv'd from /usr/tmp/tftp, srcFile = SEPD0C789154FDC.cnf.xml, dstFile = /usr/ram/SEPD0C789154FDC.cnf.xml
NOT 10:13:54.803072 tftpClient: auth server - tftpList[0] = ::ffff:10.80.129.1
NOT 10:13:54.803598 tftpClient: look up server - 0
WRN 10:13:54.805232 SECD: WARN:lookupCTL: ** no CTL, assume TFTP NONSECURE
NOT 10:13:54.807172 tftpClient: secVal = 0xa
NOT 10:13:54.807773 tftpClient: ::ffff:10.80.129.1 is a NONsecure server
NOT 10:13:54.808235 tftpClient: temp retval = SRVR_NONSECURE, keep looking
NOT 10:13:54.808678 tftpClient: retval = 10
NOT 10:13:54.809110 tftpClient: Secure file requested
NOT 10:13:54.809523 tftpClient: Non secure file approved -- SEPD0C789154FDC.cnf.xml
NOT 10:13:54.816938 TFTP: [7]:Requesting SEPD0C789154FDC.cnf.xml from 10.80.129.1
WRN 10:13:54.822003 SECD: WARN:getCTLInfo: ** phone has no CTL
WRN 10:13:54.825845 SECD: WARN:getCTLInfo: ** phone has no CTL
NOT 10:13:54.835047 TFTP: [7]:Finished --> rcvd 1456 bytes
NOT 10:13:55.010336 SECD: clearTFTPList: cleared all TFTP entries
NOT 10:13:55.046228 JVM: VendorConfig - logging display == 1
NOT 10:13:55.047554 JVM: VendorConfig - logging display, theValue == 17
NOT 10:13:55.169337 JVM: setSystemProperty() name=microedition.encoding value=utf-8
NOT 10:13:55.171804 JVM: setSystemProperty() name=microedition.locale value=RU
ERR 10:13:55.237375 JVM: Startup Module Loader|cip.cfg.r:? - Delete of sshUserInfo file failed
ERR 10:13:55.238704 JVM: Startup Module Loader|cip.setg.ScreenSaveProperty:? - Config file field <displayOnTime> is incorrectly formatted. Defaulting.
ERR 10:13:55.240553 JVM: Startup Module Loader|cip.setg.ScreenSaveProperty:? - Config file field <displayIdleTimeout> is incorrectly formatted. Defaulting.
NOT 10:13:55.246502 SECD: setSecMode: sec mode set to NONE (was NONE)
NOT 10:13:55.263415 JVM: setTimeZone tz:Russian Standard/Daylight Time ctz:Europe/Moscow
NOT 10:13:55.595116 SECD: clearSRSTList: cleared all SRST entries
ERR 10:13:55.646423 JVM: GETHOSTBYNAME: Empty Parameter
WRN 10:13:55.699101 SECD: WARN:cancelCapfOp: CAPF not in use, user cancel ignored
NOT 10:13:55.699692 SECD: clearCapfList: CAPF table cleared
ERR 10:13:55.702675 JVM: GETHOSTBYNAME: Empty Parameter
ERR 10:13:55.711673 SECD: EROR:addCapfEntry: phone has no CTL, can't use CAPF
WRN 10:13:55.724535 JVM: Startup Module Loader|NetUtil.traceIPv4DNSErrors:? - DNS Unknown Host
ERR 10:13:55.725747 JVM: Startup Module Loader|cip.sec.CapfProperty:? - Failed to resolve Capf Ipv4 Address with hostname
ERR 10:13:55.727617 JVM: Startup Module Loader|cip.sec.CapfProperty:? - dns failed previously.will resolve it now
WRN 10:13:55.728964 JVM: Startup Module Loader|NetUtil.traceIPv4DNSErrors:? - DNS Unknown Host
ERR 10:13:55.730207 JVM: Startup Module Loader|cip.sec.CapfProperty:? - Failed to resolve Capf Ipv4 Address with hostname
NOT 10:13:55.753975 SECD: setSecMode: sec mode set to NONE (was NONE)
NOT 10:13:55.785279 JVM: Startup Module Loader - Deletion of file Successful/usr/ram/SEPD0C789154FDC.cnf.xml
NOT 10:13:55.786489 JVM: Startup Module Loader|cip.cfg.r:? - DELETE ConfigFile:(ram/SEPD0C789154FDC.cnf.xml)WAS SUCCESSFUL
NOT 10:13:55.788171 INETD: Set IP mode 1
NOT 10:13:55.788705 INETD: Requestted IP mode is same as current mode
NOT 10:13:55.789870 CDP-D: cdpSetRepeater 11
NOT 10:13:55.790704 CDP-D: set pc vvlan access --> 26
NOT 10:13:55.823622 CDP-D: catchipcfg:getdhcpinfo IP:a50810c domain: chngVal:1
NOT 10:13:55.828991 ESP: send ADMIN, logging = 1, shell = 0, ipconfig = 1
NOT 10:13:55.830112 DNS: SIGHUP received...
NOT 10:13:55.832373 PAE: SIGIPCFG received...
NOT 10:13:55.841392 tftpClient: request server 0 ---> 10.80.129.1
NOT 10:13:55.842016 tftpClient: tftp request rcv'd from /usr/tmp/tftp, srcFile = User_Define_1/mk-sccp.jar, dstFile = /usr/ram/L10N-1584653765
NOT 10:13:55.847011 tftpClient: auth server - tftpList[0] = ::ffff:10.80.129.1
NOT 10:13:55.847529 tftpClient: look up server - 0
WRN 10:13:55.849117 SECD: WARN:lookupCTL: ** no CTL, assume TFTP NONSECURE
NOT 10:13:55.851181 tftpClient: secVal = 0xa
NOT 10:13:55.851781 tftpClient: ::ffff:10.80.129.1 is a NONsecure server
NOT 10:13:55.852235 tftpClient: temp retval = SRVR_NONSECURE, keep looking
NOT 10:13:55.852654 tftpClient: retval = 10
NOT 10:13:55.853080 tftpClient: Secure file requested
NOT 10:13:55.853491 tftpClient: Non secure file approved -- User_Define_1/mk-sccp.jar
NOT 10:13:55.861589 TFTP: [4]:Requesting User_Define_1/mk-sccp.jar from 10.80.129.1
NOT 10:13:55.865280 TFTP: [4]:Error --> No such file
NOT 10:13:55.870648 SYSMSG: pid 4 (/sbin/tftpd) Normal Exit, status = 2
INF 10:13:55.870685 runtime = 0.010 secs
INF 10:13:55.870703 user cpu = 0.001025390 secs
INF 10:13:55.870720 system cpu = 0.002738420 secs
INF 10:13:55.870733 child user cpu = 0.000000000 secs
INF 10:13:55.870747 child sys cpu = 0.000000000 secs
INF 10:13:55.870765 sys interrupts = 0.000473360 secs for 6 interrupts
INF 10:13:55.870786 total cpu = 0.003763810 secs ( 0% utilization )
NOT 10:13:55.907442 JVM: setSystemProperty() name=microedition.encoding value=ASCII
NOT 10:13:55.909263 JVM: setSystemProperty() name=microedition.encoding value=ASCII
NOT 10:13:55.954262 JVM: setSystemProperty() name=microedition.locale value=en
NOT 10:13:55.956112 JVM: setSystemProperty() name=microedition.locale value=en
WRN 10:13:55.974314 JVM: Startup Module Loader|cip.l10n.UserLocaleProperty:? - Unable to process LocaleProperty 'device.settings.config.localization.userlocale'
NOT 10:13:55.993687 tftpClient: request server 1 --->
NOT 10:13:56.012450 tftpClient: request server 0 ---> 10.80.129.1
NOT 10:13:56.013069 tftpClient: tftp request rcv'd from /usr/tmp/tftp, srcFile = United_States/g3-tones.xml, dstFile = /usr/ram/L10N-61391065
NOT 10:13:56.025036 ESP: server 0 = 10.80.129.1
NOT 10:13:56.036772 tftpClient: auth server - tftpList[0] = ::ffff:10.80.129.1
NOT 10:13:56.037342 tftpClient: look up server - 0
WRN 10:13:56.039157 SECD: WARN:lookupCTL: ** no CTL, assume TFTP NONSECURE
NOT 10:13:56.041548 tftpClient: secVal = 0xa
NOT 10:13:56.042149 tftpClient: ::ffff:10.80.129.1 is a NONsecure server
NOT 10:13:56.042608 tftpClient: temp retval = SRVR_NONSECURE, keep looking
NOT 10:13:56.043031 tftpClient: retval = 10
NOT 10:13:56.043464 tftpClient: Secure file requested
NOT 10:13:56.043876 tftpClient: Non secure file approved -- United_States/g3-tones.xml
NOT 10:13:56.075611 TFTP: [3]:Requesting United_States/g3-tones.xml from 10.80.129.1
NOT 10:13:56.079347 TFTP: [3]:Error --> No such file
NOT 10:13:56.084690 SYSMSG: pid 3 (/sbin/tftpd) Normal Exit, status = 2
INF 10:13:56.084726 runtime = 0.030 secs
INF 10:13:56.084744 user cpu = 0.001016140 secs
INF 10:13:56.084761 system cpu = 0.004127440 secs
INF 10:13:56.084774 child user cpu = 0.000000000 secs
INF 10:13:56.084788 child sys cpu = 0.000000000 secs
INF 10:13:56.084806 sys interrupts = 0.000648400 secs for 10 interrupts
INF 10:13:56.084827 total cpu = 0.005143580 secs ( 0% utilization )
WRN 10:13:56.152126 JVM: Startup Module Loader|cip.l10n.NetworkLocaleProperty:? - Unable to process LocaleProperty 'device.settings.config.localization.networklocale'
WRN 10:13:56.185037 SECD: WARN:lookupCTL: ** no CTL, assume UCM NONSECURE
NOT 10:13:56.201903 JVM: Adding SRST .. #valid : 1
WRN 10:13:56.205891 SECD: WARN:lookupSRST: no CTL, treat SRST as non-secure
NOT 10:13:56.211795 JVM: Done with SRST: 1
NOT 10:13:56.274791 tftpClient: request server 1 --->
NOT 10:13:56.275707 ESP: server 1 =
NOT 10:13:56.352535 tftpClient: request server6 0 ---> ::
NOT 10:13:56.359771 tftpClient: request server6 1 ---> ::
NOT 10:13:56.407633 JVM: SecureSocketImpl.create() fd=java.io.FileDescriptor@111f4 valid=true
WRN 10:13:57.135911 JVM: Startup Module Loader|cip.mmgr.ds:? - [MediaMgrSM]: Unhandled Event, State = StateOnHook Event = EventServicesTxStop
WRN 10:13:57.149565 SECD: WARN:getCTLInfo: ** phone has no CTL
WRN 10:13:57.153827 SECD: WARN:getCTLInfo: ** phone has no CTL
NOT 10:13:57.165025 tftpClient: request server 0 ---> 10.80.129.1
NOT 10:13:57.178308 tftpClient: request server 1 --->
NOT 10:13:57.243532 tftpClient: request server6 0 ---> ::
NOT 10:13:57.249934 tftpClient: request server6 1 ---> ::
ERR 10:14:39.590147 NTP: Thu Sep 26 09:14:39 2013
ERR 10:14:57.374505 JVM: cvmDebug: executing - 5. Dump total obj counts in java heap
ERR 10:14:57.386075 JVM: Counted 27546 objects
ERR 10:14:57.386815 JVM: Total Heap Size:3800064
ERR 10:14:57.387491 JVM: Free Heap Size:2771660
ERR 10:14:58.370281 JVM: cvmDebug: executing - 7. Dump string value of [C instances in java heap
ERR 10:16:48.404683 JVM: cvmDebug: executing - 5. Dump total obj counts in java heap
ERR 10:16:48.419137 JVM: Counted 34953 objects
ERR 10:16:48.419359 JVM: Total Heap Size:3800064
ERR 10:16:48.419512 JVM: Free Heap Size:2329208
ERR 10:16:49.400355 JVM: cvmDebug: executing - 7. Dump string value of [C instances in java heap
WRN 10:16:52.068040 CDP-D: lldpInetdStatsRsp: port: 0
WRN 10:16:53.007959 CDP-D: lldpInetdStatsRsp: port: 1
WRN 10:16:53.947877 CDP-D: lldpInetdStatsRsp: port: 0
WRN 10:18:53.378017 CDP-D: lldpInetdStatsRsp: port: 0
WRN 10:18:55.337826 CDP-D: lldpInetdStatsRsp: port: 1
Any ideas what can be done? The phone now displays the time correctly, but the second button shows empty squares where the "Login" button should be. All the rest of the phone inteface is in English.For some veru strange reason the problem... resolved itself.
I had to remove the phone from the Ethernet line today, because I needed it. I then re-plugged decided to re-plug it back(in about 10 minutes from the initial power off) and voila: the phone sucessfully updated itself and received the right locale...
I wish I knew what was the real problem behind this.
I did change the config on CUCME today, but I have just added a "Text to display on phones" (command "system message"). I then re-created CNF files (but I have tried that already last week).
Maybe the stars aligned in a different way today, I don't know... -
Can't mount external HDD? "usb 1-1: Device not accepting address"
I just bought a Medion HDDRIVE2GO (Full Speed) from Aldi, and at first when I plugged it in, everything went fine (well, I thought so). Appearently it had some errors with HAL not being able to read the HDD (error name="(unset)").
I gave it a reboot, and now it does not work at all! In dmesg, I have this output (the bottom is the most important I guess)
[dell@linuxnas ~]$ dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 12:06:25 CEST 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000001ffe2800 (usable)
BIOS-e820: 000000001ffe2800 - 0000000020000000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fee00000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI 2.3 present.
last_pfn = 0x1ffe2 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FE0000000 write-back
1 base 0FEDA0000 mask FFFFE0000 write-combining
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 0000000000100000 - 000000001ffe2800 (usable)
modified: 000000001ffe2800 - 0000000020000000 (reserved)
modified: 00000000feda0000 - 00000000fee00000 (reserved)
modified: 00000000ffb80000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-000000001ffe2000
0000000000 - 0000400000 page 4k
0000400000 - 001fc00000 page 2M
001fc00000 - 001ffe2000 page 4k
kernel direct mapping tables up to 1ffe2000 @ 15000-1a000
RAMDISK: 1fe3b000 - 1ffd2770
ACPI: RSDP 000fde50 00014 (v00 DELL )
ACPI: RSDT 000fde64 00028 (v01 DELL CPi R 27D4010C ASL 00000061)
ACPI: FACP 000fde90 00074 (v01 DELL CPi R 27D4010C ASL 00000061)
ACPI: DSDT fffe4000 0319C (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
ACPI: FACS 1ffff800 00040
0MB HIGHMEM available.
511MB LOWMEM available.
mapped low ram: 0 - 1ffe2000
low ram: 0 - 1ffe2000
node 0 low ram: 00000000 - 1ffe2000
node 0 bootmap 00016000 - 0001a000
(10 early reservations) ==> bootmem [0000000000 - 001ffe2000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0001000000 - 0001550444] TEXT DATA BSS ==> [0001000000 - 0001550444]
#3 [001fe3b000 - 001ffd2770] RAMDISK ==> [001fe3b000 - 001ffd2770]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0001551000 - 0001557198] BRK ==> [0001551000 - 0001557198]
#6 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
#7 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
#8 [0000015000 - 0000016000] PGTABLE ==> [0000015000 - 0000016000]
#9 [0000016000 - 000001a000] BOOTMAP ==> [0000016000 - 000001a000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x0001ffe2
HighMem 0x0001ffe2 -> 0x0001ffe2
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x00000002
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0001ffe2
On node 0 totalpages: 130931
free_area_init_node: node 0, pgdat c13f9880, node_mem_map c1559000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3953 pages, LIFO batch:0
Normal zone: 992 pages used for memmap
Normal zone: 125954 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
APIC: switched to apic NOOP
nr_irqs_gsi: 16
PM: Registered nosave memory: 0000000000002000 - 0000000000010000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 20000000 (gap: 20000000:deda0000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c1c00000 s34776 r0 d22568 u4194304
pcpu-alloc: s34776 r0 d22568 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129907
Kernel command line: root=/dev/disk/by-uuid/5501fa6d-1664-41e3-ac30-9a475cc6843d ro vga=773
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 2620840 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00000000:00000000)
Memory: 509220k/524168k available (2895k kernel code, 14260k reserved, 1208k data, 408k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xe07e2000 - 0xff7fe000 ( 496 MB)
lowmem : 0xc0000000 - 0xdffe2000 ( 511 MB)
.init : 0xc1403000 - 0xc1469000 ( 408 kB)
.data : 0xc12d3f1e - 0xc14022e0 (1208 kB)
.text : 0xc1000000 - 0xc12d3f1e (2895 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1993.528 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3988.18 BogoMIPS (lpj=6645093)
Security Framework initialized
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU0: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
Performance Events: no PMU driver, software events only.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
ACPI: Core revision 20091214
ACPI: setting ELCR to 0200 (from 0800)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Brought up 1 CPUs
Total of 1 processors activated (3988.18 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfbfee, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: Power Resource [PADA] (on)
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfed9ffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xfee00000-0xffb7ffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0xffc00000-0xfff7ffff] (ignored)
pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xebffffff pref]
pci 0000:00:1d.0: reg 20: [io 0xbf80-0xbf9f]
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0880-0x08bf] claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7]
pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7]
pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177]
pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377]
pci 0000:00:1f.1: reg 20: [io 0xbfa0-0xbfaf]
pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
pci 0000:00:1f.5: reg 10: [io 0xd800-0xd8ff]
pci 0000:00:1f.5: reg 14: [io 0xdc80-0xdcbf]
pci 0000:00:1f.6: reg 10: [io 0xd400-0xd4ff]
pci 0000:00:1f.6: reg 14: [io 0xdc00-0xdc7f]
pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe7ffffff pref]
pci 0000:01:00.0: reg 14: [io 0xc000-0xc0ff]
pci 0000:01:00.0: reg 18: [mem 0xfcff0000-0xfcffffff]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref]
pci 0000:02:00.0: reg 10: [io 0xec80-0xecff]
pci 0000:02:00.0: reg 14: [mem 0xf8fffc00-0xf8fffc7f]
pci 0000:02:00.0: reg 30: [mem 0xf9000000-0xf901ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:02:01.0: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:02:01.0: supports D1 D2
pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.0: PME# disabled
pci 0000:02:01.1: reg 10: [mem 0x00000000-0x00000fff]
pci 0000:02:01.1: supports D1 D2
pci 0000:02:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:01.1: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 02-10] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xffff]
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfbffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *11
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 *11)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:02: disabling [io 0x0800-0x0805] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:02: disabling [io 0x0808-0x080f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:03: disabling [io 0x0806-0x0807] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:03: disabling [io 0x0810-0x085f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:03: disabling [io 0x0860-0x087f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x0800-0x087f]
pnp 00:04: disabling [io 0xf000-0xf0fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf100-0xf1fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf200-0xf2fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf400-0xf4fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf500-0xf5fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf600-0xf6fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf800-0xf8fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xf900-0xf9fe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xfa00-0xfafe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xfc00-0xfcfe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xfd00-0xfdfe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [io 0xfe00-0xfefe] because it overlaps 0000:00:1e.0 BAR 13 [io 0xe000-0xffff]
pnp 00:04: disabling [mem 0xfa000000-0xfbffffff] because it overlaps 0000:00:1e.0 BAR 14 [mem 0xf4000000-0xfbffffff]
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x1ffeffff] could not be reserved
system 00:00: [mem 0x1fff0000-0x1fffffff] has been reserved
system 00:00: [mem 0xfeda0000-0xfedfffff] has been reserved
system 00:00: [mem 0xfff80000-0xffffffff] has been reserved
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x0880-0x08bf] has been reserved
system 00:03: [io 0x08c0-0x08df] has been reserved
system 00:03: [io 0x08e0-0x08ff] has been reserved
system 00:09: [io 0x0900-0x091f] has been reserved
system 00:09: [io 0x03f0-0x03f1] has been reserved
system 00:0f: [io 0xbf40-0xbf5f] has been reserved
system 00:0f: [io 0xbf20-0xbf3f] has been reserved
system 00:10: [mem 0xfebffc00-0xfebfffff] has been reserved
pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x27ffffff pref]
pci 0000:00:1f.1: BAR 5: assigned [mem 0x28000000-0x280003ff]
pci 0000:00:1f.1: BAR 5: set to [mem 0x28000000-0x280003ff] (PCI address [0x28000000-0x280003ff]
pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe7ffffff pref]
pci 0000:02:01.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
pci 0000:02:01.0: BAR 16: assigned [mem 0xf4000000-0xf7ffffff]
pci 0000:02:01.1: BAR 15: assigned [mem 0x24000000-0x27ffffff pref]
pci 0000:02:01.1: BAR 16: assigned [mem 0x2c000000-0x2fffffff]
pci 0000:02:01.0: BAR 0: assigned [mem 0xf8000000-0xf8000fff]
pci 0000:02:01.0: BAR 0: set to [mem 0xf8000000-0xf8000fff] (PCI address [0xf8000000-0xf8000fff]
pci 0000:02:01.1: BAR 0: assigned [mem 0xf8001000-0xf8001fff]
pci 0000:02:01.1: BAR 0: set to [mem 0xf8001000-0xf8001fff] (PCI address [0xf8001000-0xf8001fff]
pci 0000:02:01.0: BAR 13: assigned [io 0xe000-0xe0ff]
pci 0000:02:01.0: BAR 14: assigned [io 0xe400-0xe4ff]
pci 0000:02:01.1: BAR 13: assigned [io 0xe800-0xe8ff]
pci 0000:02:01.1: BAR 14: assigned [io 0xf000-0xf0ff]
pci 0000:02:01.0: CardBus bridge to [bus 03-06]
pci 0000:02:01.0: bridge window [io 0xe000-0xe0ff]
pci 0000:02:01.0: bridge window [io 0xe400-0xe4ff]
pci 0000:02:01.0: bridge window [mem 0x20000000-0x23ffffff pref]
pci 0000:02:01.0: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:02:01.1: CardBus bridge to [bus 07-0a]
pci 0000:02:01.1: bridge window [io 0xe800-0xe8ff]
pci 0000:02:01.1: bridge window [io 0xf000-0xf0ff]
pci 0000:02:01.1: bridge window [mem 0x24000000-0x27ffffff pref]
pci 0000:02:01.1: bridge window [mem 0x2c000000-0x2fffffff]
pci 0000:00:1e.0: PCI bridge to [bus 02-10]
pci 0000:00:1e.0: bridge window [io 0xe000-0xffff]
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xfbffffff]
pci 0000:00:1e.0: bridge window [mem 0x20000000-0x27ffffff pref]
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:01.0: enabling device (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
pci 0000:02:01.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
pci 0000:02:01.1: enabling device (0000 -> 0003)
pci 0000:02:01.1: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfdffffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe7ffffff pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xffff]
pci_bus 0000:02: resource 1 [mem 0xf4000000-0xfbffffff]
pci_bus 0000:02: resource 2 [mem 0x20000000-0x27ffffff pref]
pci_bus 0000:02: resource 3 [io 0x0000-0xffff]
pci_bus 0000:02: resource 4 [mem 0x00000000-0xffffffff]
pci_bus 0000:03: resource 0 [io 0xe000-0xe0ff]
pci_bus 0000:03: resource 1 [io 0xe400-0xe4ff]
pci_bus 0000:03: resource 2 [mem 0x20000000-0x23ffffff pref]
pci_bus 0000:03: resource 3 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:07: resource 0 [io 0xe800-0xe8ff]
pci_bus 0000:07: resource 1 [io 0xf000-0xf0ff]
pci_bus 0000:07: resource 2 [mem 0x24000000-0x27ffffff pref]
pci_bus 0000:07: resource 3 [mem 0x2c000000-0x2fffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1629k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1274299821.609:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 998
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xe0000000, mapped to 0xe0800000, using 1536k, total 32768k
vesafb: mode is 1024x768x8, linelength=1024, pages=41
vesafb: protected mode interface info at c000:549f
vesafb: pmi: set display start = c00c5533, set palette = c00c557f
vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0d: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
serial 0000:00:1f.6: PCI INT B disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 408k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Floppy drive(s): fd0 is 1.44M
SCSI subsystem initialized
FDC 0 is a post-1991 82077
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
ata2.01: NODEV after polling detection
ata1.00: ATA-6: HTS548040M9AT00, MG2OA5EA, max UDMA/100
ata1.00: 78140160 sectors, multi 8: LBA48
ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8081N, 0108, max MWDMA2
ata2.00: configured for MWDMA2
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HTS548040M9AT00 MG2O PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8081N 0108 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sda1 sda2 sda3 sda4
sr 1:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda3): mounted filesystem with ordered data mode
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day, 114 bytes nvram
udev: starting version 151
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
intel_rng: FWH not detected
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux agpgart interface v0.103
Marking TSC unstable due to TSC halts in idle
input: PC Speaker as /devices/platform/pcspkr/input/input2
ACPI: AC Adapter [AC] (on-line)
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SBTN]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Switching to clocksource acpi_pm
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
parport_pc 00:0e: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
iTCO_vendor_support: vendor-support=0
agpgart-intel 0000:00:00.0: Intel 845G Chipset
lp: driver loaded but no devices found
lp0: using parport0 (interrupt-driven).
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xe8000000
ppdev: user-space parallel port driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (57 C)
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x9b4cb1, caps: 0x884793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:012a]
yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:01.0: TI: mfunc 0x01261222, devctl 0x64
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000bf80
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:15/LNXVIDEO:00/input/input7
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
Intel ICH Modem 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0418, PCI irq 11
yenta_cardbus 0000:02:01.0: Socket status: 30000006
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xe000-0xffff: clean.
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
3c59x 0000:02:00.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
3c59x: Donald Becker and others.
0000:02:00.0: 3Com PCI 3c905C Tornado at e0c6ac00.
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Intel ICH 0000:00:1f.5: setting latency timer to 64
yenta_cardbus 0000:02:01.1: CardBus bridge found [1028:012a]
yenta_cardbus 0000:02:01.1: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:01.1: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:01.1: TI: mfunc 0x01261222, devctl 0x64
usb 1-1: new full speed USB device using uhci_hcd and address 2
[drm] Initialized drm 1.1.0 20060810
yenta_cardbus 0000:02:01.1: ISA IRQ mask 0x0418, PCI irq 11
yenta_cardbus 0000:02:01.1: Socket status: 30000006
yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge I/O window: 0xe000 - 0xffff
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xe000-0xffff: clean.
yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xfbffffff
yenta_cardbus 0000:02:01.1: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x27ffffff
usb 1-1: device descriptor read/64, error -71
usb 1-1: device descriptor read/64, error -71
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] radeon: Initializing kernel modesetting.
[drm] register mmio base: 0xFCFF0000
[drm] register mmio size: 65536
[drm] GPU reset succeed (RBBM_STATUS=0x00000140)
agpgart-intel 0000:00:00.0: AGP 2.0 bridge
agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[drm] radeon: VRAM 64M
[drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
[drm] radeon: GTT 64M
[drm] radeon: GTT from 0xE8000000 to 0xEBFFFFFF
[drm] radeon: irq initialized.
[drm] Detected VRAM RAM=64M, BAR=128M
[drm] RAM width 64bits DDR
[TTM] Zone kernel: Available graphics memory: 255756 kiB.
[drm] radeon: 32M of VRAM memory ready
[drm] radeon: 64M of GTT memory ready.
[drm] radeon: cp idle (0x00008383)
[drm] Loading R100 Microcode
platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
usb 1-1: new full speed USB device using uhci_hcd and address 3
clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[drm] radeon: ring at 0x00000000E8000000
[drm] ring test succeeded in 1 usecs
intel8x0_measure_ac97_clock: measured 52675 usecs (2532 samples)
intel8x0: clocking to 48000
[drm] radeon: ib pool ready.
[drm] ib test succeeded in 0 usecs
[drm] Panel ID String: QDI141X1LH03
[drm] Panel Size 1024x768
[drm] Default TV standard: NTSC
[drm] 27.000000000 MHz TV ref clk
[drm] No TV DAC info found in BIOS
[drm] Default TV standard: NTSC
[drm] 27.000000000 MHz TV ref clk
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA
[drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[drm] Encoders:
[drm] CRT1: INTERNAL_DAC1
[drm] Connector 1:
[drm] LVDS
[drm] Encoders:
[drm] LCD1: INTERNAL_LVDS
[drm] Connector 2:
[drm] S-video
[drm] Encoders:
[drm] TV1: INTERNAL_DAC2
usb 1-1: device descriptor read/64, error -71
[drm] fb mappable at 0xE0040000
[drm] vram apper at 0xE0000000
[drm] size 786432
[drm] fb depth is 8
[drm] pitch is 1024
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
Console: switching to colour frame buffer device 128x48
fb0: radeondrmfb frame buffer device
registered panic notifier
[drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
usb 1-1: device descriptor read/64, error -71
usb 1-1: new full speed USB device using uhci_hcd and address 4
usb 1-1: device not accepting address 4, error -71
EXT4-fs (sda4): mounted filesystem with ordered data mode
usb 1-1: new full speed USB device using uhci_hcd and address 5
Adding 265064k swap on /dev/sda2. Priority:-1 extents:1 across:265064k
psmouse serio2: ID: 10 00 64
usb 1-1: device not accepting address 5, error -71
hub 1-0:1.0: unable to enumerate USB device on port 1
eth0: setting full-duplex.
input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/serio2/input/input8
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
lspci (Is this useable info?)
[dell@linuxnas ~]$ lspci
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:00.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
02:01.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
02:01.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus ControllerI found this post on linux forums which say It's a HAL related problem.
"rmmod ehci_hcd" made it work for some of these guys Which one of them explains It's a data speed issue. Cables.., 2.0 1.0, that sort of things. Read it, I bet you'll get more out of it, It's old though.
Try removing the module, plugging the drive, check dmesg, and mount manually.
Last edited by Ekimino (2010-05-20 01:23:54) -
I spend good money for my iPhone i have the iPhone 5 with the new charger slot which is smaller. I have been through at least 3 charging cords and this is not acceptable to me. i never had a problem with this on my older phone. apple needs to correct this and reimburse me for this cord.
Charging cords are covered by the iPhone warranty or their own warranty
if puchased separately. Take your iPhone and the cords to your local
Apple store for evaluation and possible replacement. -
I have an ipad2 with wifi and 3G. My wife and I are traveling in France (Nice) then into Italy. We are unable to purchase a data plan because our Verizon IPad will not accept a sim chip...we are told. An Apple store employee here said this model is good only in the US. The iPads here take a sim card. We were advised by an Apple Store Employee at home that this model would work in Europe and that we could buy our service here. That does not seem to be the case. We have been told that we must invest in a modem at 200.00€ and then purchase a separate service plan for each country. We can use the free wifi wherever it is available but we cannot connect to the outside world when out of range. Is there anything else we can do?
Thanks, JohnUnfortunately, no other solution is available.
Hope this helps -
Share to mobileme / username and password will not accepted
Hello,
I'm using the localiced german version of FCP, so I'm not sure which are the correct words in the dialog boxes.
When I try to share to mobileme with the option "visible for everyone or only for me" everything is okay, but when I wont to share to a specific person using the last option in the dropdown-menu "Names and Passwords"? (in german "Namen und Kennwörter bearbeiten..." and entering a username and a password for this specific person FCP hangs for a few seconds and then just show me the option "visible for everyone".
FCP did not accepting my input. Trashing the preferences did not resolve the problem. iPhoto is able to connect to mobileme also with sharing to a specific person.I've tested it now with iMovie with success. In the sharing options all my previously entered users with there password are shown. But in FCP all are gone. What can i do?
Anyone? -
Error: : connection pool does not exist
I am getting a Connection pool does not exitst Error on starting Web
Logic. When i Checked on http://localhost:8002/console ->
jdbc-connectionpools
Productionpool(name of the connection pool), I checked the testing tab
it shows it is unavailable while it shows Deployed=true on the
Configuraton tab.
It is failing on my system while its working on other systems. I am
using weblogicSP4_814
Can u pls provide me some solution for this error.
<Jun 16, 2006 4:33:11 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "noti
fJMSJDBCConnPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:12 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "noti
fJMSJDBCConnPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:13 PM IST> <Error> <JDBC> <BEA-001150> <Connection
Pool "notifJMSJDBCConnPool" deployment failed with
the following error: 0:Could not create pool connection. The DBMS
driver exception was: access denied (java.util.Proper
tyPermission oracle.net.wallet_location read).>
<Jun 16, 2006 4:33:13 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "prod
uctionPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:14 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "prod
uctionPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:15 PM IST> <Error> <JDBC> <BEA-001150> <Connection
Pool "productionPool" deployment failed with the f
ollowing error: 0:Could not create pool connection. The DBMS driver
exception was: access denied (java.util.PropertyPerm
ission oracle.net.wallet_location read).>
<Jun 16, 2006 4:33:15 PM IST> <Error> <JDBC> <BEA-001151> <Data Source
"notifJMSJDBCConnPool" deployment failed with the
following error: DataSource(weblogic.jdbc.jts.notifJMSJDBCConnPool)
can't be created with non-existent Pool (connection
or multi) (notifJMSJDBCConnPool).>
<Jun 16, 2006 4:33:15 PM IST> <Error> <JDBC> <BEA-001151> <Data Source
"productionPool" deployment failed with the follo
wing error: DataSource(weblogic.jdbc.jts.productionPool) can't be
created with non-existent Pool (connection or multi) (
productionPool).>
<Jun 16, 2006 4:33:15 PM IST> <Alert> <JMS> <BEA-040052> <JMSServer
"NotificationJMSServer" store failed to open java.io
.IOException: JMS JDBC store, connection pool = <notifJMSJDBCConnPool>,
prefix = <notif>: connection pool does not exist
java.io.IOException: JMS JDBC store, connection pool =
<notifJMSJDBCConnPool>, prefix = <notif>: connection pool does no
t exist
at
weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:488)
at
weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentÂTarget.java:337)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymenÂtTarget.java:597)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(ÂDeploymentTarget.java:575)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeployÂmentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:3Â9)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpÂl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpÂl.java:755)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:Â734)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeÂanImpl.java:516)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at
weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeÂanServerImpl.java:990)
at
weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerÂImpl.java:948)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:948)
at
weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.javÂa:475)
at
weblogic.management.configuration.ServerMBean_Stub.updateDeployments(ServerÂMBean_Stub.java:7731)
at
weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlavÂeDeployer.java:1321)
at
weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:33Â9)
at
weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeplÂoymentManagerServerLifeCycleImpl.j
ava:229)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
<Jun 16, 2006 4:33:15 PM IST> <Error> <JMS> <BEA-040123> <Failed to
start JMS Server "NotificationJMSServer" due to webl
ogic.jms.common.JMSException: JMS can not open store notifJMSJDBCStore.
weblogic.jms.common.JMSException: JMS can not open store
notifJMSJDBCStore
at weblogic.jms.backend.BEStore.start(BEStore.java:163)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentÂTarget.java:337)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(DeploymenÂtTarget.java:597)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(ÂDeploymentTarget.java:575)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(DeployÂmentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:3Â9)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpÂl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpÂl.java:755)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:Â734)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBeÂanImpl.java:516)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at
weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBeÂanServerImpl.java:990)
at
weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServerÂImpl.java:948)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:948)
at
weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.javÂa:475)
at
weblogic.management.configuration.ServerMBean_Stub.updateDeployments(ServerÂMBean_Stub.java:7731)
at
weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(SlavÂeDeployer.java:1321)
at
weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:33Â9)
at
weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeplÂoymentManagerServerLifeCycleImpl.j
ava:229)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
Caused by: java.io.IOException: JMS JDBC store, connection pool =
<notifJMSJDBCConnPool>, prefix = <notif>: connection p
ool does not exist
at
weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:488)
at
weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
... 29 more
<Jun 16, 2006 4:33:32 PM IST> <Warning> <HTTP> <BEA-101248>
<[D:\Build\autodeploys\i2\weblogic_home\config\vendavo\.\app
lications\.wlnotdelete\wlap12518\vendavo.war]: Deployment descriptor
"web.xml" is malformed. Check against the DTD: org.
xml.sax.SAXParseException: The content of element type "web-app" must
match "(icon?,display-name?,description?,distribut
able?,context-param*,filter*,filter-mapping*,listener*,servlet*,servlet-mapÂping*,session-config?,mime-mapping*,welcome-f
ile-list?,error-page*,taglib*,resource-env-ref*,resource-ref*,security-consÂtraint*,login-config?,security-role*,env-entr
y*,ejb-ref*,ejb-local-ref*)". (line 252, column 11).>
java.lang.ExceptionInInitializerError
at com.vendavo.cl.ClassHelper.<clinit>(ClassHelper.java:28)
at
com.vendavo.cl.io.ResourceHelper.addLoader(ResourceHelper.java:121)
at
com.vendavo.cl.io.ResourceHelper.<init>(ResourceHelper.java:39)
at
com.vendavo.cl.io.ResourceHelper.<clinit>(ResourceHelper.java:29)
at
com.vendavo.platform.action.StartupAction.init(StartupAction.java:75)
at
com.vendavo.platform.action.StartupAction.contextInitialized(StartupAction.Âjava:311)
at
weblogic.servlet.internal.WebAppServletContext$FireContextListenerAction.ruÂn(WebAppServletContext.java:7044)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubjeÂct.java:321)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at
weblogic.servlet.internal.WebAppServletContext.notifyCreated(WebAppServletCÂontext.java:1753)
at
weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServlÂetContext.java:3352)
at
weblogic.servlet.internal.HttpServer.preloadResources(HttpServer.java:727)
at
weblogic.servlet.internal.WebService.preloadResources(WebService.java:486)
at
weblogic.servlet.internal.ServletInitService.resume(ServletInitService.javaÂ:30)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
Caused by: java.security.AccessControlException: access denied
(java.util.PropertyPermission * read,write)
at
java.security.AccessControlContext.checkPermission(AccessControlContext.javÂa:269)
at
java.security.AccessController.checkPermission(AccessController.java:401)
at
java.lang.SecurityManager.checkPermission(SecurityManager.java:524)
at
java.lang.SecurityManager.checkPropertiesAccess(SecurityManager.java:1243)
at java.lang.System.getProperties(System.java:501)
at
com.vendavo.cl.property.AppProperties.loadSystemProperties(AppProperties.jaÂva:411)
at
com.vendavo.cl.property.AppProperties.loadBasics(AppProperties.java:326)
at
com.vendavo.cl.property.AppProperties.getInstance(AppProperties.java:160)
at com.vendavo.cl.log.VLog.loadAppProperties(VLog.java:134)
at com.vendavo.cl.log.VLog.createDefaultSetup(VLog.java:94)
at com.vendavo.cl.log.VLog.<clinit>(VLog.java:66)
... 18 more
<Jun 16, 2006 4:33:34 PM IST> <Warning> <HTTP> <BEA-101162> <User
defined listener com.vendavo.platform.action.StartupAc
tion failed: java.lang.NoClassDefFoundError.>
<Jun 16, 2006 4:33:34 PM IST> <Warning> <HTTP> <BEA-101162> <User
defined listener com.vendavo.platform.action.StartupAc
tion failed: java.lang.NoClassDefFoundError.>
<Jun 16, 2006 4:33:34 PM IST> <Error> <HTTP> <BEA-101216> <Servlet:
"AdminServlet" failed to preload on startup in Web a
pplication: "soap".
Thanks in Advance,
Ketan.B.Parekhketan parekh wrote:
I am getting a Connection pool does not exitst Error on starting Web
Logic. When i Checked on http://localhost:8002/console ->
jdbc-connectionpools
Productionpool(name of the connection pool), I checked the testing tab
it shows it is unavailable while it shows Deployed=true on the
Configuraton tab.
It is failing on my system while its working on other systems. I am
using weblogicSP4_814
Can u pls provide me some solution for this error. Hi. Would you run the utils.dbping utility, and then
give it the arguments to connect to the same DBMS with
the same user as your pool? Show me the exception you
get if it fails:
C:\bea81sp5\weblogic81>java utils.dbping
Usage: java utils.dbping DB2B [-d dynamicSections] USER PASS HOST:PORT/DBNAME
or java utils.dbping JCONN2 USER PASS HOST:PORT/DBNAME
or java utils.dbping JCONNECT USER PASS HOST:PORT/DBNAME
or java utils.dbping INFORMIXB USER PASS HOST:PORT/DBNAME/INFORMIXSERVER
or java utils.dbping MSSQLSERVER4 USER PASS HOST:PORT/DBNAME
or java utils.dbping MSSQLSERVER4 USER PASS [DBNAME@]HOST[:PORT]
or java utils.dbping MSSQLSERVERB USER PASS HOST:PORT/DBNAME
or java utils.dbping ORACLE USER PASS DBNAME
or java utils.dbping ORACLEB USER PASS HOST:PORT/DBNAME
or java utils.dbping ORACLE_THIN USER PASS HOST:PORT:DBNAME
or java utils.dbping POINTBASE USER PASS HOST[:PORT]/DBNAME
or java utils.dbping SYBASEB USER PASS HOST:PORT/DBNAME
>
>
<Jun 16, 2006 4:33:11 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "noti
fJMSJDBCConnPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:12 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "noti
fJMSJDBCConnPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:13 PM IST> <Error> <JDBC> <BEA-001150> <Connection
Pool "notifJMSJDBCConnPool" deployment failed with
the following error: 0:Could not create pool connection. The DBMS
driver exception was: access denied (java.util.Proper
tyPermission oracle.net.wallet_location read).>
<Jun 16, 2006 4:33:13 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "prod
uctionPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:14 PM IST> <Warning> <JDBC> <BEA-001129> <Received
exception while creating connection for pool "prod
uctionPool": access denied (java.util.PropertyPermission
oracle.net.wallet_location read)>
<Jun 16, 2006 4:33:15 PM IST> <Error> <JDBC> <BEA-001150> <Connection
Pool "productionPool" deployment failed with the f
ollowing error: 0:Could not create pool connection. The DBMS driver
exception was: access denied (java.util.PropertyPerm
ission oracle.net.wallet_location read).>
<Jun 16, 2006 4:33:15 PM IST> <Error> <JDBC> <BEA-001151> <Data Source
"notifJMSJDBCConnPool" deployment failed with the
following error: DataSource(weblogic.jdbc.jts.notifJMSJDBCConnPool)
can't be created with non-existent Pool (connection
or multi) (notifJMSJDBCConnPool).>
<Jun 16, 2006 4:33:15 PM IST> <Error> <JDBC> <BEA-001151> <Data Source
"productionPool" deployment failed with the follo
wing error: DataSource(weblogic.jdbc.jts.productionPool) can't be
created with non-existent Pool (connection or multi) (
productionPool).>
<Jun 16, 2006 4:33:15 PM IST> <Alert> <JMS> <BEA-040052> <JMSServer
"NotificationJMSServer" store failed to open java.io
.IOException: JMS JDBC store, connection pool = <notifJMSJDBCConnPool>,
prefix = <notif>: connection pool does not exist
java.io.IOException: JMS JDBC store, connection pool =
<notifJMSJDBCConnPool>, prefix = <notif>: connection pool does no
t exist
at
weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:488)
at
weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Deployment??Target.java:337)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Deploymen??tTarget.java:597)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(??DeploymentTarget.java:575)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(Deploy??mentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:3??9)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImp??l.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImp??l.java:755)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:??734)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBe??anImpl.java:516)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at
weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBe??anServerImpl.java:990)
at
weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServer??Impl.java:948)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:948)
at
weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.jav??a:475)
at
weblogic.management.configuration.ServerMBean_Stub.updateDeployments(Server??MBean_Stub.java:7731)
at
weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(Slav??eDeployer.java:1321)
at
weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:33??9)
at
weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(Depl??oymentManagerServerLifeCycleImpl.j
ava:229)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
<Jun 16, 2006 4:33:15 PM IST> <Error> <JMS> <BEA-040123> <Failed to
start JMS Server "NotificationJMSServer" due to webl
ogic.jms.common.JMSException: JMS can not open store notifJMSJDBCStore.
weblogic.jms.common.JMSException: JMS can not open store
notifJMSJDBCStore
at weblogic.jms.backend.BEStore.start(BEStore.java:163)
at weblogic.jms.backend.BackEnd.openStores(BackEnd.java:1171)
at weblogic.jms.backend.BackEnd.resume(BackEnd.java:1290)
at weblogic.jms.JMSService.addJMSServer(JMSService.java:2260)
at weblogic.jms.JMSService.addDeployment(JMSService.java:2031)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(Deployment??Target.java:337)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Deploymen??tTarget.java:597)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(??DeploymentTarget.java:575)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(Deploy??mentTarget.java:241)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:3??9)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImp??l.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImp??l.java:755)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:??734)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBe??anImpl.java:516)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1557)
at
com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1525)
at
weblogic.management.internal.RemoteMBeanServerImpl.private_invoke(RemoteMBe??anServerImpl.java:990)
at
weblogic.management.internal.RemoteMBeanServerImpl.invoke(RemoteMBeanServer??Impl.java:948)
at
weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:948)
at
weblogic.management.internal.MBeanProxy.invokeForCachingStub(MBeanProxy.jav??a:475)
at
weblogic.management.configuration.ServerMBean_Stub.updateDeployments(Server??MBean_Stub.java:7731)
at
weblogic.management.deploy.slave.SlaveDeployer.updateServerDeployments(Slav??eDeployer.java:1321)
at
weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:33??9)
at
weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(Depl??oymentManagerServerLifeCycleImpl.j
ava:229)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
Caused by: java.io.IOException: JMS JDBC store, connection pool =
<notifJMSJDBCConnPool>, prefix = <notif>: connection p
ool does not exist
at
weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:488)
at
weblogic.jms.store.JDBCIOStream.checkPool(JDBCIOStream.java:1599)
at weblogic.jms.store.JDBCIOStream.open(JDBCIOStream.java:548)
at weblogic.jms.store.JMSStore.open(JMSStore.java:224)
at weblogic.jms.backend.BEStore.open(BEStore.java:262)
at weblogic.jms.backend.BEStore.start(BEStore.java:151)
... 29 more
<Jun 16, 2006 4:33:32 PM IST> <Warning> <HTTP> <BEA-101248>
<[D:\Build\autodeploys\i2\weblogic_home\config\vendavo\.\app
lications\.wlnotdelete\wlap12518\vendavo.war]: Deployment descriptor
"web.xml" is malformed. Check against the DTD: org.
xml.sax.SAXParseException: The content of element type "web-app" must
match "(icon?,display-name?,description?,distribut
able?,context-param*,filter*,filter-mapping*,listener*,servlet*,servlet-map??ping*,session-config?,mime-mapping*,welcome-f
ile-list?,error-page*,taglib*,resource-env-ref*,resource-ref*,security-cons??traint*,login-config?,security-role*,env-entr
y*,ejb-ref*,ejb-local-ref*)". (line 252, column 11).>
java.lang.ExceptionInInitializerError
at com.vendavo.cl.ClassHelper.<clinit>(ClassHelper.java:28)
at
com.vendavo.cl.io.ResourceHelper.addLoader(ResourceHelper.java:121)
at
com.vendavo.cl.io.ResourceHelper.<init>(ResourceHelper.java:39)
at
com.vendavo.cl.io.ResourceHelper.<clinit>(ResourceHelper.java:29)
at
com.vendavo.platform.action.StartupAction.init(StartupAction.java:75)
at
com.vendavo.platform.action.StartupAction.contextInitialized(StartupAction.??java:311)
at
weblogic.servlet.internal.WebAppServletContext$FireContextListenerAction.ru??n(WebAppServletContext.java:7044)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubje??ct.java:321)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at
weblogic.servlet.internal.WebAppServletContext.notifyCreated(WebAppServletC??ontext.java:1753)
at
weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServl??etContext.java:3352)
at
weblogic.servlet.internal.HttpServer.preloadResources(HttpServer.java:727)
at
weblogic.servlet.internal.WebService.preloadResources(WebService.java:486)
at
weblogic.servlet.internal.ServletInitService.resume(ServletInitService.java??:30)
at
weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:136)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:965)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:360)
at weblogic.Server.main(Server.java:32)
Caused by: java.security.AccessControlException: access denied
(java.util.PropertyPermission * read,write)
at
java.security.AccessControlContext.checkPermission(AccessControlContext.jav??a:269)
at
java.security.AccessController.checkPermission(AccessController.java:401)
at
java.lang.SecurityManager.checkPermission(SecurityManager.java:524)
at
java.lang.SecurityManager.checkPropertiesAccess(SecurityManager.java:1243)
at java.lang.System.getProperties(System.java:501)
at
com.vendavo.cl.property.AppProperties.loadSystemProperties(AppProperties.ja??va:411)
at
com.vendavo.cl.property.AppProperties.loadBasics(AppProperties.java:326)
at
com.vendavo.cl.property.AppProperties.getInstance(AppProperties.java:160)
at com.vendavo.cl.log.VLog.loadAppProperties(VLog.java:134)
at com.vendavo.cl.log.VLog.createDefaultSetup(VLog.java:94)
at com.vendavo.cl.log.VLog.<clinit>(VLog.java:66)
... 18 more
<Jun 16, 2006 4:33:34 PM IST> <Warning> <HTTP> <BEA-101162> <User
defined listener com.vendavo.platform.action.StartupAc
tion failed: java.lang.NoClassDefFoundError.>
<Jun 16, 2006 4:33:34 PM IST> <Warning> <HTTP> <BEA-101162> <User
defined listener com.vendavo.platform.action.StartupAc
tion failed: java.lang.NoClassDefFoundError.>
<Jun 16, 2006 4:33:34 PM IST> <Error> <HTTP> <BEA-101216> <Servlet:
"AdminServlet" failed to preload on startup in Web a
pplication: "soap".
Thanks in Advance,
Ketan.B.Parekh -
My wife's iTunes used ID will not work. Tried resetting the password, but email was not received. Tried using personal questions method, but would not accept the correct date of birth, so could not go any further. Has her iTunes ID been hacked? How can I fix this?
Thanks for that advice @randers4.
I linked through and submitted my info as a "topic not covered" in the iCloud section. After entering the serial number of my MBP it turns out I wasn't eligible for technical support (though I don't think this is hardware related support) and the final suggestion was to take my computer into an Apple store. I called my local Apple reseller and asked for assistance. The customer service rep was very nice but unable to help, so suggested I call Apple Support on 1300 321 456. I did so and, again, spoke to two very polite and helpful customer service people (I was transferred to security services). I didn't have to be on hold to speak to either rep for more than a few seconds! After trying a few different things, he worked out what was happening...
So, to cut a long story short, to solve the problem in my OP, all I had to do was log out of iCloud in my System Preferences and log back in using my current Apple ID. [Edited to add that I had to sign out of everything I was currently signed in to with my Apple ID before logging out and in again.]
Problem solved!
Message was edited by: NotBaconBits -
My ipad has been a little glitchy for the last couple of weeks....not able to load pages because of DNS lookup failure and really slow loading...some of which has to do with the DSL service I have, but I followed the directions on one of the Apple wi-fi issues pages to reset network all connections..which I did, and now the Ipad cannot connect to WiFi because it will not accept (or cannot resolve..or??) password. I am sure I am typing the password correctly and have tried it on several routers..and it cannot cannect to any router properly even with the correct password. My laptop is connected just fine and it accepts the password and I have confirmed the password with the ISP and tried other routers.
So the question is what should I do if I am entering the right password and the Ipad can't sign itself on to the Wifi network?Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
"unable to get printer status" and "server-error-not-accepting-jobs"
I've got an Intel Mac Pro with Tiger. When I accepted the latest update from Apple, I lost all my defined printers! I've re-added a local USB printer and a networked Laserjet - fine. But I also added a Phaser 850 color printer (networked) which used to work fine. It connects ok, and opens the printer queue window, but when it tries to print, it says "Unable to get printer status (server-error-not-accepting-jobs". The queue stays active (not stopped) but the jobs don't move. I've tried deleting the printer and re-making it - same deal. What's going on?
MikeHi Mike,
One think I really dislike about OSX is the Rocket Science needed to just Print!
Might try these two...
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
Might try Printer Setup Repair 5.1...
http://www.fixamac.net/software/index.html -
On yahoo email, it accepted my login id, but not password. This started on one account about two weeks ago. Today when I tried to login to another yahoo email, which worked yesterday, but it would not accept my password on this account.
I bought some items on ebay and wanted to leave feedback. When I clicked on the leave feedback button a sign in window appeared, this should not have happened, when I tried to sign in, it would not accept my password. I called ebay and was told they have had many complaints from customers using firefox when trying to leave feedback. The help desk suggested I try with Internet Explorer, I did, and it worked perfectly.
I have been using firefox for a long time and really do not want to go back to IE, but when I cannot sign into my accounts, I can't, so I will have to use IE.
As far as I know, no new programs have been installed on this computer.Try deleting cookies and cache:
1. Tools| Clear recent history
2. Time range to clear: Everything
3. If it isn't already selected, select '''Cookies''' and '''Cache'''
4. '''Clear now'''
'''Check cookie exceptions'''
1. Tools | Options | Privacy Panel
2. Set '''Firefox will: Use custom settings for history.''' '''Insure Accept cookies for sites and accept third-party cookies''' is selected
3. Click '''Exceptions'''. If the misbehaving site is in that list, select it and click '''Remove site'''
'''Safe Mode'''
Add-ons can cause problems with not being able to log into certain websites. To see if this is the case with your issue, run [[Safe mode]]. When you get to the safe mode window, select Continue in Safe Mode. If this resolves your problem, see [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Also see [[Updating Firefox]] and [[Cannot log in to websites]] -
ID password not accepted anymore (once worked)
Good morning,
I am kind of desperate...and I hope somebody is familiar with this problem.
I have adobe reader 11 XI, the latest version.
I am taking a trainingcourse at Learningtrain. They provide lessonmaterial with certificates / id only.
I created an ID and sent that to my teacher. fyi: I was strongly advised to switch off the automatic update option..as adobe deletes id's... and i did.
The teacher had it all set up. And it worked! I could succesfully open the material with my password.
now the issue:
But it only worked once! Very strange. the ID is still there,but adobe does not accept my password any more
so i cannot open the file anymore. My home work is due today... and it is a lot ;-)
I have checked and double checked my password and is must be correct.
My teacher advised me to delete this id, and to create a new one. but that does'nt work as reader still askes
for my password when i want to delete the id.
so i decided to deinstall reader and install again (who knows...) but it lookes like i cannot delete it.
fyi: I also have adobe acrobat pro on my pc as i have the whole adobe css range. but I have exclusively used the reader.
Hope you can help me.
Kind regards AshaWell, if you can't uninstall Reader, you probably have something wrong. But, if you were advised against updating, uninstalling will surely be worse!
I'm afraid I don't know what kind of password this is, there are so many possibilities. What does the prompt say? A screen shot would be good (BUT DON'T TRY TO EMAIL IT IN REPLY).
Maybe you are looking for
-
BPC Input Schedule: DELETE button erase background color
Hi, Can anyone help on the following problem: I have an input schedule (either with nested rows or simple) and BPC by default marks all changed cells with red color. But when [DEL] button key is pressed in a cell all other marked cells on the same ro
-
How does pixelgrabber store the pixels?
i used pixelgrabber like so in an applet Image ball = getImage(getCodeBase(), "bball.gif"); int w = ball.getWidth(this); int h = ball.getHeight(this); int[] pixels = new int[w * h]; PixelGrabber pg=new PixelGrabber(ball,0,0,w,h,pixels,0,w); try{ pg.g
-
Different outcomes of Adobe Air on GT-P5210
Dear all, We have our own app which is bult on Flash and it needs installation of Adobe Air on tablet. I already read those posts about 4.0 Air is not supporting P5210 as the x86 chip. One of our clients who purchased a few 5210 and updated Adobe Air
-
Video content behind other INDD layers
Hi, I have imported an .oam file into indesign and wish to have the footage autoplaying in the background, behind interactive buttons. It works in the EPUB preview, but not on my adobe content viewer on ipad or desktop - any ideas?
-
Taglib URI error in Weblogic60
Hi All, having some trouble deploying my custom Tag, this is the error... thanks in advance Parsing of JSP File '/test/tagpage.jsp' failed: /test/tagpage.jsp(1): Could not parse deployment descriptor: