IP11 - Maintain Maintenance Strategies, Adding a field to a package row

Hello everybody!
As an ABAP programmer i wanted to ask you about the IP11 transaction.
Is there a way that i can add fields(columns) to a package's row?
(I mean to add more fields then the standard fields selected from the t351p table).
Thank you,
Idan Ben-Moshe

Hi
I don't understand the exact need you want
you want to add Scrolling facility to your Entire Applet or only for the Textarea Class?
In first case
Create the ScrollPane and add it to the applet contentPane. and put entire components to a Panel and just add it to scroll pane.
Regards
Vinoth

Similar Messages

Maintenance strategies in Spanish

We are preparing to roll out SAP plant maintenance in a plant in Chile and are verifying the routine and preventative process works properly when using the Spanish language pack.
When creating a maintenance plan with IP01 while logged in with Spanish, we down arrow on the strategy field and get 'No values exist'.
Where do we configure maintenance strategies for use with Spanish?
David Macindoe

The strategies will only come up if the description has been maintained in the log on language. Please use transaction IP11 to maintain the description for existing strategy in Spanish language and they should now be available for usage.
You could also do the same while logged on in one of the languages. From IP11 menu choose Utilities > Choose language and ten select all the languages for which you would like to maintain the description.Now select the strategy and choose Goto > Translation .Now maintain the description in the appropriate languages.
Regards
Narasimhan

Adding Custom Fields to XD99, XK99

Hi,
I have a requirement to add custom fields to Customer and Vendor master transaction which are mass maintained.
XD99 and XK99 are the transaction codes. I found notes on adding custom fields to mass maintain MM17, however did not find any solution as of now to add custom fields to XD99 and XK99.
If anyone has worked on it, kindly provide me details if there is any Badi/User exit/Enhancement point to achieve this.
Regards,
Sneha Soni.

This works well with standard fields, but check [Note 216596 - Include additional fields in mass maintenance|https://service.sap.com/sap/support/notes/216596] and [Note 414020 - MASS: Customer fields are not mass-maintainable|https://service.sap.com/sap/support/notes/414020]
Regards,
Raymond

Problem in creating table maintenance generator for 61 fields in table

Hi Experts,
I am facing problem in creating a table maintenance genarator for a ZTABLE which has 61 fields
i am using below details whicle creating the TMG
in Maintenance screen
i am giving maintenance type as two step
Maint screen no overview screen 2
                          single screen        3
Dialog Data Transport details
Recording routine    standard recording routine
but it is giving following error
screen SAPL<ZTABLE NAME>    0003 could not be generated
In DYNPFIELD_ATTR mandatory field LINE has no value
please let me know how to sort out these errors.
Is there any limit on the number of fields for which we can create table maintenance generetor.
Thanks a lot in advance
Sudipto

Hi Sudipto,
There is not limit to the number of fields of the Table which can be used in TMG for generation. But, from the usability point of view this will horrible.
I created a Z table and added 64 fields and was able to generate the TMG with the screens perfectly. So, I guess there should not be any problem.
Well, have a look at the Function Group. I guess the screen numbers are already used by some other screens. You can set the system to propose freely available screen numbers from the pool.
Also, check whether proper authorization is assigned or not.
And if nothing is working, you can degenerate all the generated screens and then can have a new regeneration of it.
Hope these tips will work.
Thanks,
Samantak

Maintenance View with Subset Fields

Hi All,
I have created a maintenance view based on a single DB table. Two key fields are defined to be as subset fields. No selection conditions are added to the view. I have used table maintenance genrator to define the screen (one step) along with the events.
In SM30, i get the popup to fill the subset fields.
I have created an event for AA (to replace default read). I am filling total attribute here.
a) Is there some other attribute that i need to fill apart from total?
I receive following dump
" Exception condition "NO_VALUE_FOR_SUBSET_IDENT" is raised"
When i set <status>-sbsid_rcvd = 'R' in read routine along with total, then the above exception doesn't appear.
But filtering based on the subset values doesn't happen automatically.
b) I also need have to have routines to perform insert, copy and validation.
c) Would the contents displayed be automatically filtered based on the subset values or we need to process this in user routines for read and so on?
As i find very limited documentation available for maintenance views with subset fields, could you suggest me some example to do the above?
Thanks in Advance,
Regards,
Rekha

Hello Rekha,
Yes I've same idea, documentation for maintenance screens is inadequate.
But there is way to find examples for all events,
table TVIMF is storing the Table name - Event - Form name columns.
For example when u want to do something about "creating a new entry"
Just go se11 > Table maintenance generator and find related event : 05
- Then go to TVIMF and display a record for event = 05
- than go to function group of maintenance screen of the TABLE in that record
- find the subroutine form ( TVIMF-FORMNAME) in that function group
This is a working example for that event, try or copy & use.
I hope it helps you for the coding for all the events.
Bulent
Edited by: Bulent Balci on Aug 5, 2010 11:28 PM
Edited by: Bulent Balci on Aug 5, 2010 11:29 PM

Adding custom fields to the condition table in CRM

Hi all,
Our requirement is to download the sales conditions type from R3 to the CRM system. In one of the condition table we are trying to add shipping point( VSART ) and Special processing indicator (SDABW).
For that we have added the fields in the structure CND_MAPT_ACS_REM_CUST (Comm. Structure Condition Exchange Customer Exit R/3 Fields) and we have added the fields in the field catelog in transaction ( /SAPCND/CTCT - Maintain Condition Tables). Then we have mapped these fields in the view V_CND_MAP_CNVFLD.
Finally we run the adapter object of that particular table to download the details from R3, but the condition table in CRM is not getting activated, so the adapter object is giving the error.
Please help in this.
Thanks & Regards,
Raghuram.

Hello Raghuram,
I feel that your issue is similar what i have faced, refer to my post:
Link: [Issue in customer specific price;
For solving this you can refer to detailed steps in, Note 514952 - Download of customer-specific tables.
Also additionaly you may need to run the report /sapcnd/rv12n001, as i also had to do so.
If not solved then let me know the relevant message in SLG1
Regards

Adding a field in table

Following is my scenario....
1. There is a Z table which has 7 fields.
2. Table Z has a Function group attached to it with all the necessary includes and Function modules.
3. Also there is a code written to populate 3 fields of Z tables when a user enters a key field. These 3 fields are populated
from other tables by lookup for the keyfield.
4. Also there are screens attached to the Z table.
5. I have created a copy of Z table say Y table.
6. I have added one more field to table Y.
7. Also I have copied the function group, by right clicking on existing function group in SE80 and selecting copying option.
8. Now I have modified the code in includes and other necessary programs to change the references to the Y table. I have also
changed all the necessary parameters.
9. When I enter in SM30, I can see the new added field. But when I enter the keyfield, corresponding 3 fields are not populated.
10. I have checked all the necessary code and references, but yet not gettin anything.
Can any help me....is there somethg I am missing....

Hi,
If I understand you, the problem is that the maintenance of this table with SM30 is before to adding new fields. So, you must do newly the maintentenance with tcode SE54. Think that it do a function module and the screens with the fields that in this moment had the table.
Regards,
Eduardo

Adding custom fields to SRM UI Add-on

Dear SAP Experts,
We enabled SRM UI and followed the SAP provided configuration guide to complete all the required setup's. we are able to create shopping cart using the new UI without any issues.
Now we are trying to enable custom fields on new SRM UI which are currently available on Web dynpro SC UI. we followed the configuration steps (2.1 Extending screens via SPRO configurations) provided in the Extensibility-Customer_CookBook_SP04_1.pdf.
After the configuration is completed, we are able to see the new custom fields on the new UI screen, but we are not seeing the description as expected - the description is shown as VIEWKEY_FieldName_L eventhough we maintained the label text.
And also any data that is entered in the new custom fields are not saved to database and therefore not available in BBP_PD transaction.
Please see the attached screenshot for more details.Please provide your guidance in resolving the issue.
SRM UI Add-on Extensibility cook book is available as an attachment to the note: 1830075 - Extensibility Cookbook (Customer Fields)
Thank you and appreciate your quick response.
Regards
Venkat

Venkat, We are trying to enhance the UI5 Shopping Cart using Extensibility-Customer_CookBook_SP04_1.pdf but I don't see the fields showing up in UI5 shopping cart and below are the steps that I followed.
I am trying to add Location field in SRMShoppingCartItem (2nd row in below screen shot)
I enhanced the Staging Structure (/SRMNXP/S_CUST_ITEM_LIST) , Customer Include (INCL_EEW_PD_ITEM_CSF_SC) & Cust-MD Structure (/SRMNXP/S_ITEM_UI_MET_CUST) and went to SPRO and did this config for adding fields to UI screen.
SAP Supplier Relationship Management---->SAP SRM User Interface Add-on---->Extension and Field Controls---->Configuration for Extension of Fields
I didn't add column to database and Odata Service Model. My Goal is to show Location Field first on the SRMShoppingCartItem and then want to enhance Database & OdataModel.
Below are the Steps I followed.
1) Enhanced Staging Structure : /SRMNXP/S_CUST_ITEM_LIST
Appended the Component Type : ZCUSTITEMLIST with Field ZLOCATION of Type Char20
2) Enhanced Customer Include INCL_EEW_PD_ITEM_CSF_SC
Appended the Component Type : ZAINCL_EEW_PD_ITEM_CSF_SC with Field ZLOCATION of Type Char20
3) Enhanced Cust-MD Structure /SRMNXP/S_ITEM_UI_MET_CUST
Appended the Component Type : ZITEMUIMETCUST with Field ZLOCATION_V, ZLOCATION_E, ZLOCATION_R of Type XFELD
4) SPRO
SAP Supplier Relationship Management---->SAP SRM User Interface Add-on---->Extension and Field Controls---->Configuration for Extension of Fields
Added this new entry:
But I don't see this Location field showing up in the UI5 Shopping Cart. Please let me know if I am missing any thing in Configuration.
If possible can you provide the steps that you followed.
Thanks,
Venu.

Adding Custom Fields to XD99

Hey All,
I am trying to figure out a way to Mass maintain Custom fields(Z fields) in KNA1 using transaction XD99. I did find some material which discussed about adding custom fields to MM17 transaction, but couldnt get any usefull information on XD99.
Any inputs or suggestions are highly appreciated.

Hi,
Please check the following oss note
Note 414020 - MASS: Customer fields are not mass-maintainable
Thanks
Naren

Adding new fields in Custom Infotype

Hi,
I need to change some fields of Custom Infotype. But project is already gone live for 1 country. will making changes to infotype affect for existing live country?
Safe side....We are thinking Adding new fields in Custom Infotype. & displaying corresponding fields for countries in another tab
& hiding the old tab.
Please let me know procedure for Adding new fields in Custom Infotype for displaying in new tab.
Edited by: Sachin Thigale on Aug 23, 2010 7:04 PM
Edited by: Sachin Thigale on Aug 23, 2010 7:05 PM

Please search. Lot of Threads on this.
Follow these steps.
Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype
The above details are from the following link
Re: How to add fields in custom infotype and update its screens

Technical specifications for adding a field in screengroup

Hi ,
I have a view profile say FL . In the activity and layout view I have added a Tab say "85" -Additional data 3- . Now I have made tab active and used 150 ans screen group "150-USER data"
I want developer to add a new cusom filed in screen group 150-user data .
Specification for field is ready .
Question is
1) How to know which table this screen group 150-user data belongs to so that developer can add it there ? Or is there any other method of specification .
2)I wil be using this field in equipment also . However in equipment I would like to control data orgin from FL or individual maintenance . How to enable this feature in custom fields of equipment master data .
NPB

NPB,
Normally the user defined fields are filled through the user exit and the user exit documentaion would help you in identifying which core table needs to be extended to include the custom fields.Have a look at the same for help.
1) In your case the custom fields needs to included to EQUI or IFLOT or EQUZ or ILOA depending upon your business needs.Have a look at the user exit (ITOB0001 )help for detailed documentation.
2). It would probably require additional coding to accomplish this requirement(Visibility of transfer or individual maintenance for these custom fields), but it should be possible through the same user exit and or save user exit (IEQM0003 Additional checks before updating equipment).
Regards
Narasimhan

Adding SERVICE_ORG_RESP_SHORT field to Condition Table

Dear Experts!
We want to use the SERVICE_ORG_RESP_SHORT field in our Condition Table to define product Pricing. The problem is it doesn't exist in a Field Catalog (SPRO -> CRM -> Master Data -> Conditions and Condition Technique -> Condition Technique: Basics -> Create Field Catalog).
We see two possible ways of dealing with this issue:
1) Adding SERVICE_ORG_RESP_SHORT field into Global Field Catalog (SPRO -> CRM -> Master Data Conditions and Condition Technique -> Condition Technique: Basics -> System Configuration for Condition Technique -> Set Up Usage -> folders "Global Field Catalog: Fields" and "Global Field Catalog: Data Elements").
2) Using BAdI (SPRO -> CRM -> Basic Functions -> Pricing -> Define Settings for Pricing -> Adopt User-Defined Fields).
Please, tell us, which of these ways is correct?
Kind Regards,
Alexander Smirnyagin.

Hi Alexandr,
the first step mentioned above is required to define the field, so that you can use it to create a conditon table based on it and maintain master data for that condition table. In addition, you should implement the /SAPCND/ROLLNAME BADI for the field.
The second step described above is required to integrate the field for transaction processing, e.g. in a sales or service order. You need to define which order value should get passed to your pricing attribute.
Best Regards,
Michael

Not able to see Metadata fields when adding the fields to the rule in UCM

Not able to see Metadata fields when adding the fields to the rule even after creating them in information fields of configuration manager.It is happening for few fields only.We are using 10.1.3 version of UCM.Kindly provide a solution if any.

Dhilipan,
I am trying to setup AES at the current Customer.
You are right on LR_JP to be linked to customs code list instead of ACE and I do achieve that if I were to maintain the Custom code list by maintaining the assignment for EAR in a separate test.
I was infact trying to follow the link: http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30c7015e-c191-2d10-71b9-95907dc8edd1?overridelayout=t…
On this document, if you look at page# 14 thru 17, it has the steps I described in my original note with customs code still appearing in the drop down for 'EXCPT' for EAR.
Nevertheless, I wanted to default Type = C50 when the license type for the line on the Customs declaration is 'EXCPT' but if you see the very last screen-shot below, even though the license type configuration has default value as 'C50' it did not get pulled into the line item Documents tab when I tried to pick the category as 'CUII'.
Let me know your thoughts on defaulting the data into Customs declaration for AES filing.
What I want to achieve is the following:
When License type is 'EXCPT', system should default the type as 'C50'
Should put the License type 'EXCPT' into the number field
Should put the actual License# 'ENC' into the Supplement field
Should put the ECCN # '5A002' into the Details field
Thanks,
Prashant.

Added new field to cube but data not passed from DSO

Hope someone can help.
(BI 7.0) We added new fields into a cube. The fields already existed in the DSO. When we ran the process chain in development for the first time after making this change, we notice that the 'historical' data for these fields is populated in the cube. When we do this in our quality system only new data passed to the cube is updated. In development in the sub-chain DTP request we see all previous requests listed under selections. In quality it is only the latest request. The only difference is that the DeltaInit flag in the DTP request in development is ticked (extraction mode) - but not in quality. Does anyone know whyb this is?

hi peter,
Adding fields to cube doesn't affect delta status...The delta DTP should be able to handle delta requests automatically.
I guess in you quality system, the cube already got all requests updated from ODS before you importing the change request. And in develop system none of the requests in ODS were updated before the change.
Regards,
Frank

Adding new field to data source -can not see them

Experts,
I have added 4 fields to the data source 0FI_AA_11 .
I can able to see these fields in the append structure or in RSA2,but i can not able to see in RSA6.I reactivated append structure ,still i can not see these fields in RSA6.
Please advice me how can i see them in RSA6.

Hi Manoj,
Have a look, similar post:
Re: not able to see new fields in datasource
Hope it Helps
Srini

IP11 - Maintain Maintenance Strategies, Adding a field to a package row

Similar Messages

Maybe you are looking for