IPad 2 very unresponsive after 8.3 update

Three weeks ago I updated my iPad 2 to iOS 8.3 having been running iOS 7.1.2 Now the lag in wireless is very frustrating and apps are slow to load and respond, sometimes hanging altogether. I have tried a soft reset, hard reset, reset my wireless router but all to no avail. Has anyone got a solution or ideas for me to try? I have read that it is too late to revert to iOS 7.1.2 but if there is a way ..?
I do not wish to buy a new iPad as this one was working with no problems before the upgrade. Many thanks.

Hi Have you tried a Factory Reset this will get rid of any bugs . Cheers Brian

Similar Messages

  • Touch Screen unresponsive after iOS 8 update

    My 1 year old 64GB iPhone 5 touch screen started to become unresponsive after iOS 8 update
    It's not consistent. Touch screen functionality will seize whilst phone is being used for either answering calls, typing messges, surfing, gaming etc and won't become responsive until it is turned off and on again (via power button). Home button is functioning with no problems.
    As the phone is now out of its warranty period I want to verify if it's the OS that's causing this or do I actually have a hardware issue.

    I have the same issue. iPhone 5, 1 year-old, not even a scratch.
    Sometimes my touch screen works, sometimes not. When it works, it is just for some seconds, then some phantom touches start to happen all over the screen, but specially, when i'm typing, it types z or m, when I try to type something in, and it receives it, it will act as z or m again....
    If I switch off my screen and switch on again... sometimes it will work, sometimes it wont... veeery unstable.
    I considered downgrading to 7.1.2 but since I heard it is ilegal I decided to wait for a new iOS release.... any suggestions? (already wiped it and the issue continued...)
    Is it really not recommended to downgrade it and have my phone funcionalities back?

  • I tried updating my ipad over a wireless, after downloading the update i was unable to install with a message an error occurred installing ios 7.0.3

    i tried updating my ipad over a wireless, after downloading the update i was unable to install with a message an error occurred installing ios 7.0.3

    Hello mom_5_01,
    The following article should be quite beneficial in your endeavor to update your iPad.
    iPad: Unable to update or restore
    http://support.apple.com/kb/HT4097
    You may encounter the following symptoms while updating or restoring your iPad:
    iPad continually restarts but never displays the Home screen.
    An update or restore did not complete and the iPad is no longer recognized in iTunes.
    iPad stops responding, showing the Apple logo with no progress bar or a stopped progress bar, for over ten minutes.
    If this occurs, you can place iPad into recovery mode and attempt to restore again. If iTunes displayed an alert with an error code, see this article before attempting the steps outlined here.
    Cheers,
    Allen

  • HT1766 ipad no longer functions after accepting an updated version of "Hayday"

    ipad no longer functions after accepting an updated version of "Hayday"

    Unfortunately it was a blinding flash of the obvious that fixed my issue...
    Simply rebooting the iMac brought it back to life.
    Duh.
    I assumed that since Apple usually forces reboots after updates if they are required that this didn't require one, apparently it did.

  • My mind 2014 macbook pro keeps freezing and is very slow after the yosemite update

    HI my macbook 2014 model keeps freezing and it is very slow after i had updated it to yosemite

    Why don't you try these: ( might or might not help, but it's worth a try )
    See what you have loading on your login items.
    Open up activity momitor, under All Procesess, see what's using most of your CPU resources (%).
    Hightlight the one using the highest % on the CPU then click on quit process and see if that works.
    Once you're done with that, go to Disk Utility and do a verify disk.  After that, do a verify disk permission and repair if needed.
    See if that helps you.

  • IPad 3 very slow after updating to iOS 8

    I Updated my iPad 3 to iOS 8 the day it was released and almost immediately after it finished updating I started having problems.
    1) The Wifi connection is incredibly slow on every device I update.
    2) The entire iPad 3 itself runs very slowly whether I am running apps or switching between (yes I have been shutting down programs when not using them as to conserve RAM but it still runs poorly)
    I also did download 8.0.1 with no new issues but did also download and install 8.0.2
    I just would like to know if there is anything I can do to get better performance back to my iPad.

    No, this is definitely an iOS 8.3 bug, Allen. I have an iPad mini (original, 24/12 old) and an iPhone 5 (not S, 18/12 old). Updated both from 8.2 to 8.3. I keep them and the apps up to date and run a tight ship.
    Since the update, the iPhone has been behaving normally.
    However, starting immediately after the update, the iPad has been rebooting: when you plug it into the power and it goes to sleep, it reboots itself. This NEVER ONCE happened before the 8.3 update -- and I think I started with this iPad on iOS5 or at least 6, with all the updates inbetween. If you want to use it again shortly after plugging it in, you have to wait about five-ten minutes (as other have reported).  So far, it has always rebooted successfully. But you do have to put in your passcode in response to "you have to enter your passcode upon rebooting" message; and tell it to trust your current computer connect once again.
    It just now rebooted itself once again when plugged into the computer USB port, while in the middle of a sync (the screen went to sleep). Not happy about that; potential to damage data.
    I confirm: this NEVER happened before 8.3, and it now reliably happens EVERY TIME I plug the iPad into power and it goes to sleep. I have three power sources (computer USB, individual Apple charger, aftermarket reserve battery charter) and it happens with all of them.
    As far as I can tell, it only reboots itself once per charger-plugin, and doesn't do so again until you unplug it and plug it back in again (somewhat confident, but not 100% sure, of that).
    Hope that helps. The bug needs squashing, and soon.

  • IPad unresponsive after iOS 7 update

    iPad completely unresponsive after iOS 7.0.2 update. Please help.

    Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • HT4623 my keypad on the ipad working very slow after update

    After  the ios update when i try to type the keys take a long time to work and then sometimes wrong letter.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             

  • IPad mini initially unresponsive after turning on?

    My iPad mini is consistently unresponsive after I first turn it on from shut down. It opens to the lock screen, but I can't type my password.
    I found that pushing the power button 4 times (two cycles of turning off the screen, then again to turn on the screen) will solve the problem, but it's really frustrating each time I turn on my iPad. Has anyone else experienced this?
    I am presently still running the last version of iOS 6. Would updating to iOS 7 fix this? I have concerns about significantly decreased battery life with the new OS. Any advice or comments would be much appreciated!
    Thanks,
    Kelly

    Running iOS 7 has not significantly decreased my battery times from what I was getting in iOS 6, but there is no question that what I was getting in iOS 5 and comparing that to what I get now, there is about one hour's difference. I used to easily get 10 hours in iOS 5 and that gradually decreased with every update in iOS 6 and has continued to decrease a little bit in iOS 7, but I still get 8-1/2 - 9 hours out of a full charge.
    As for the weird unresponsive screen issue, have you rebooted the iPad by holding down on the sleep and home buttons at the same time until the Apple logo appears on the screen?
    Tried resetting all settings! Settings>General>Reset>Reset all settings. If you do this you will have to enter all device settings again, but no data will be lost.

  • Internet connection slow/unresponsive after iOS 7 update

    Using my iPad is very frustrating right now. The internet is either VERY slow (sometimes 5 min to load a simple page) or completely unresponsive (error loading page message). Then after a few minutes of this, it works fine for a short while... then back to being slow again. Most apps require the internet, so this thing is pretty useless when it is not working. PLEASE HELP.

    For the both of you I would try a reset. Hold both buttons on screen and on the top for about 10 seconds, or until the device turns off and then the apple logo appears, then release. You can also try going to settings>general>reset>reset newtork settings. Might help clear some things up for you.
    If that doesn't help just let me know and we can take some further actions to help.

  • IPAD 2 NO SIM AFTER  IOS 6 UPDATE

    IPAD 2 NO SIM AFTER  IOS 6 UPDATE

    Ditto here. Updated to IOS6 and now my SIM isn't being recognised. Did a factory reset, got a new sim but still not recognising it. Phoned apple - cant downgrade. Disappointing as my Ipad2 worked perfectly until the upgrade.  Apple can you please sort this out? or is it some hardware in the Ipad2 that has made it incompatible?
    If anyone finds a solution please let me know.  I'm going to pop into the apple store and see what they have to say. I'm just outside my warranty but I've looked after the ipad2 really well and now it seems to have let me down.

  • Keyboard is randomly unresponsive after latest Mavericks update. How to fix this?

    My keyboard is randomly unresponsive for a minute or two after the latest update. This happens a few times a day. Does anybody else experience this problem?
    I'm on a 2011 Macbook Air, using Mavericks.

    When you have the problem, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • IPad will not charge after IOS 7 update unless the brightness is dimmed,..Why?

    I recently updated my 4th gen IPad 64Gb to ios7. Previous to the update I loved my iPad and it worked flawlessly. Since updating the iPad now will not charge unless I dim the brightness of the screen, and slowly when it does. Why? Is there a way to remedy this?

    I do not know if it's iOS7 related or not. My 2 is still working. However, my first 2 was returned to best buy after the charging port on it died. So that can happen. ANd it happens with little to no warning. CHarges monday, doesn't on tuesday.
    As far as I know the issues with 'unsigned' lightning devices is just the cable, not the power brick, but there's no official word (nor do I expect one)
    Lightning cables have a little chip in them and if that chip isn't signed by Apple then your device kicks up an error but should still work.
    However since this is an iPad 2, that's not the case since 2's use 30 pin chargers, not lightning.
    Usually when a 2 doesn't charge, common troubleshooting is to swap out the charger, cable and outlet, to confirm or rule those out. Also to do the reset. (the soft reset that's holding down the sleep and home keys until it reboots). Also to look in and blow out the port in case there's some lint or such in there.
    Usually those things fixes it. If not, then it could be the port.

  • IPad 2 constantly rebooting after ios 7 update

    My IPad is hosed!  After the IOS 7 update, it is constantly rebooting.  I've tried to reset to factory settings to do a restore but it won't stay on long enough to get it done. Any one out there have any ideas/suggestions?  (besides giving up)

    Have you tried to reset iPad?
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • IPad 2 iBooks unresponsive after iOS 8.1.1 update

    After updating to iOS 8.1.1 on my iPad 2 this morning, iBooks fails to launch properly. It seems to freeze with a blank screen (no Library), then the iPad goes back to my home screen. Double-pressing the Home button shows my iBooks Library window, but when I switch to it iBooks is completely unresponsive.  I have shut down and restarted my iPad, but the same thing happens.
    Any suggestions?

    Owner of an iPad 2 here with iOS 8.1.1. It sounds like the iBooks app has been corrupted somehow, as it works fine on my tablet.
    Did you upgrade from iOS 7 to iOS 8 on the iPad over the air? The reason I ask, and this applies to ANY operating system, is that garbage from an older version can be carried through into the newer version giving exactly the kind of problems you describe. I would recommend that for any new major release of an OS to scrub the device and set it up as a new machine. This is a short-term P.I.T.A. but it does help preempt these kinds of niggles.
    In your case let's try the non-drastic approach first: if you can, uninstall the iBook app and then reinstall it via the App store. This usually fixes minor annoyances, but if the iPad persistently misbehaves, nuking it via iTunes might be your best bet. Backup your stuff before you do that, though.

Maybe you are looking for

  • Migrating JRC to CRJ with a SERVLET

    Hi everyone, I have transfered the JRC to CRJ without success. Problem 18:17:03,769 INFO  [[/report-viewer]] ViewerServlet: Displaying report C:\WINDOWS\TEMP\11-report-viewer\tmp\report-5834- 111002-1248711423753 for client with id 5834 offline false

  • Error code 1014:1014

    With windows 8.1, and internet explorer 11.0, and adobe reader version 11. I get the error "there is a problem with adobe acrobat/reader if it is running please exit, and try again 1014:1014: In searching this error the suggested fixes are apply a pa

  • IllustratorCC Error after Apple update

    does anyone here had some trouble too ? today afternoon i saw an update on appstore, im using mavericks10.9.2, and after the safari update my illustrator open but when i click new file or try to open a file it crashes ..  =/ here goes the log : http:

  • PXI-5406: unable to generate 10 mV p-p sine wave with 1.5 V dc offset

    I'm using the PXI-5406 and FGEN Soft Front Panel to output a low amplitude sine wave. It works fine when I have the amplitude set to 10 mV and the DC offset set to 1V but when I increase the dc offset (I want it to be set to 1.5V) the FGEN front pane

  • SQL Job failed on mirror failover

    We have a SQL Server 2005 database mirroring configuration on two Windows Server 2008 R2 servers.  There is a SQL Agent job that is triggered by a WMI Event Alert, using the query "SELECT * FROM DATABASE_MIRRORING_STATE_CHANGE WHERE State=8 AND Datab