IPad 3 stuck in "Connect to iTunes" screen after attempting to update to iOS6.0

Tried to update to iOS 6.0, and the iPad 3 is stuck on the "Connect to iTunes" screen.  After plugging it back in and connecting it, iTunes recognizes it, and sees it in Recovery mode. Nothing has worked so far.  I've tried:
1. connecting to another MacMini and trying to restore (same (-1) error)
2. Deleted the iPad software update from the library and tried to download and restore again. (same (-1) error)
3. one hour on the phone with applecare tech support. multiple things tried: holding the sleep/wake and home buttons ect...  (same (-1) error)
Has anyone else seen this? I noticed someone else asked the same question, and someone offered a blank link.
I'll try anything.
Thanks guys

Yes, thank you though.
I've done that roughly 30 times over the last 8 hours.  That was one of the methods I tried with AppleCare Tech support.
The biggest issue I'm seeing is that the device can't BE turned off.  Holding the slep wake button does nothing.  The "Connect to iTunes" screen (usb to iTunes logo) seems to be stuck on the screen, unless it's going through the restore process.
When I go through the restore steps via iTunes, it gets all the way to the "Installing Firmware" portion, (roughly about 75% done according to the ipad screen, and thats when the error message pops up again. 
I even just tried doing the whole thing from a PC and got the same message.
...I touched a PC...
...Must sterilize hands...
thanks for the reply though.
Hopefully, I can figure something out, or I might have to make a two hour drive to an apple store to get a replacement.

Similar Messages

  • IPhone 5 stuck on connect to iTunes screen after attempted iOS7 update

    Updated iTunes to 11.1 with no problem. Plugged my phone in to update to iOS7 and now its displaying the USB thing with an arrow up to the iTunes symbol yet won't connect to iTunes when I plug it in.... any ideas????

    Hey corubathedog,
    It sounds like your iPhone was kicked into recovery mode, which I understand can be very frustrating. However, the following article will help to resolve this issue:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks,
    Matt M.

  • IPad stuck on "Connect to iTunes" screen after iOS 8.0.2 Update

    Attempted to update to iOS 8.0.2 last night on my 4th Gen iPad. After verifying the download, the iPad instructed me to "Connect to iTunes". Once connected, iTunes stated that my iPad was in need of a restore, which I attempted to do so. Upon "extracting software" iTunes states that it cannot recognize my device and fails the restore. My iPad is still stuck on "Connect to iTunes" screen.
    So far I've:
    Attempted restore on iTunes 3 times
    Attempted hard restart (reboot) by holding home button and top button down for ten seconds.
    Don't know what else to do, Please Help!!!!

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • IPod Touch stuck on "Connect to iTunes" screen after attempting to install iOS6

    Like the title says, I attempted to update my iOS on my 4th generation ipod touch. Not only did the update not install due to some unknown error, my ipod has been stuck at the dreaded "Connect to iTunes" screen. It isn't being recognized by Windows 7 when I plug it in, either. I've gone through the apple pages and followed their trouble shooting guide, and still nada. I've reinstalled iTunes, restarted my computer, done the sleep/wake and home button tricks, updated the drivers, uninstalled/reinstalled the drivers, used 3 different cords to connect my ipod to my PC, let it die then try to connect it; you name it. Does anyone else have advice on how to fix this? It's only a month old, and this is really frustrating.

    To try recovery mode try using this program instead of the buttons.
    RecBoot: Easy Way to Put iPhone into Recovery Mode

  • Stuck on "connect to itunes" screen after trying to update

    Update was interupted because of "unknown error"
    Now my Ipad is stuck on "Connect to Ituns"
    Have tried to reset by holding both buttons for a long time but still only returns to Connect to Itunes sceen.
    Itunes does not recognize the ipad.
    Anyone any ideas exept for turning it in for service

    Makes sure you disable any antivirus or software firewall on your desktop. They can get in the way of the update, causing this problem.
    Have you actually got the update downloaded yet? If not, it might be helpful to download and install separately

  • Phone stuck on connect to itunes screen after update attempt

    Hi, hope someone can help me. I connected my iPhone to my computer to transfer my photos from the phone to the PC. I have automatic syncing turned off.
    When I connected, I was prompted to update the iTunes version, which I did. It's now version 9. Then I attempted to update the iPhone version. I got a message saying I had to transfer my purchases first, which I did. Then I tried the update again. The update seemed to take awhile, then I got a message saying it failed. There was a "More Information" button which just prompted me to send info to Apple, which I did. Unfortunately I didn't save the info.
    At that point all my iPhone info no longer showed in iTunes, and the only active option is Restore. It does say "Your iPhone software is up to date," which would seem to indicate that the update did work...I tried disconnecting and reconnecting my phone. When I do this, I get the message "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
    I would rather not Restore the phone unless I have no other options, since I have 600 pics, contacts, etc on the phone...Of course not backed up since this is the first time I've tried to transfer data.
    So I tried a few things:
    - I disconnected and reconnected the phone several times.
    - I restarted the computer several times.
    - I went to the Apple site and tried the troubleshooting steps for "stuck on connect to itunes screen" (which is what my phone is currently doing).
    - I ran the diagnostic checks in iTunes (output below - I ran this while the phone was plugged in yet it says it's not found).
    - I held down the Home and the Sleep/Wake button until I see the Apple icon.
    - I went to My Computer > Manage and tried to update drivers, but the phone doesn't show in the device manager.
    - I tried a different USB port and there are no other devices connected to the machine.
    Nothing worked, my phone is stuck on the connect to iTunes screen and I get the error message every time I plug it in. I haven't tried another computer bc I don't have one and I'm not sure how to create/use another user account on this machine.
    I wouldn't mind calling support but my phone doesn't work...Any help is much appreciated. Thanks in advance.
    ============
    Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
    ASUSTeK Computer INC. 1005HA
    iTunes 9.1.0.79
    QuickTime 7.6.6
    FairPlay 1.7.16
    Apple Application Support 1.2.1
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.0.0.102
    Apple Mobile Device Driver 1.46.0.0
    Bonjour 2.0.0.34 (214.3)
    Current user is an administrator.
    The current local date and time is 2010-03-31 02:42:39.
    iTunes is not running in safe mode.
    Video Display Information
    Mobile Intel(R) 945 Express Chipset Family
    Mobile Intel(R) 945 Express Chipset Family
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2010-03-31 02:22:42.
    ** iPod/iPhone Connectivity Tests **
    iPodService 9.1.0.79 is currently running.
    iTunesHelper 9.1.0.79 is currently running.
    Apple Mobile Device service 3.0.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Device Not Currently Connected:
    Fifth Generation iPod (iPod with video) running firmware version 1.3
    iPhone 3G running firmware version 3.0
    ** iPhone/iPod Touch Sync Tests **
    No iPhone or iPod found.
    Message was edited by: gobblygook
    Message was edited by: gobblygook

    Your only choice at this point is to restore your iphone. Since it appears from your post that you have never synced to this computer, you of course will not have a backup to restore from. That means your only choice is to restore as a new device & re-sync your itunes content. Unfortunately, all of your contacts, calendars, pics in your camera roll, etc., will be lost. Its not a good idea to use the iphone or any phone for that matter as a storage device, as things like this can & do happen. You should be syncing on a regular basis. The first thing done when you do sync is an iphone backup. You should also transfer pics in your camera roll to a supported application on your computer on a regular basis, much like any digital camera. You can always sync pics back to your phone, but if the only copies are on the phone, you run the risk of losing them.
    See if you can force the phone into recovery mode:
    Leave the USB cable connected to your computer, but NOT your phone, itunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • Iphone 5 is stuck at connect to itunes screen after the last software update

    The last thing which I did on my phone is software Update and left it at night .Today Morning I saw my IPhone 5 is stuck at connect to iTunes screen
    I  tried connecting to iTunes with my laptop and clicked on restore and update still it is at same screen
    Rebooted the device still same screen
    Please let me know if you are aware of this fix

    Hi vadlapavanigeetha,
    Welcome to Apple Support Communities.
    Did you see an alert window when you attempted to update your iPhone? The suggestions in the article linked below will resolve most update and restore issues.
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    Cheers!
    -Jason

  • My iPad 2 is stuck on the connect to iTunes screen after trying software update

    I was updating my software on my iPad 2.  Now it is stuck on the connect to iTunes screen. Help!

    That is telling you to connect to iTunes on your computer because now you need to restore the device. Something went wrong when you updated. So connect you iPad to your computer's iTunes and restore.
    iTunes: Restoring iOS software

  • HT201263 My iPhone 4 is stuck on the "Connect to iTunes screen" after trying to update to iOS 7.0.4! Help!

    I was attempting to update my iPhone 4 to the new iOS 7.0.4 via my computer after I plugged it in to create a backup copy and something went wrong before it could finish and I recieved an error message. Now my phone is stuck on the "Connect to iTunes screen". I've tried everything to reset & restore my phone with no luck!
    I have:
    -Restarted my computer
    -Updated iTunes to most current version
    -Turned phone on and off several times, waiting up to a half hour before turning on (to be greeted directly with apple logo then the connect to iTunes screen)
    -Turned on, turned on and held home button (nothing happens)
    -My computer is NOT recognizing my device at ALL! But when I plugged my boyfriends iPhone in, it detected it no problem.
    I tried calling my phone from the other phone and it goes straight to voicemail. I am super frustrated! Does anybody know what is going on?

    I was able to restore my phone!!!
    I called Apple and they said there was nothing more I could do. I called my carrier Verizon and was able to get my computer to recognize my device after trying this-
    Solution:
    After trying EVERYTHING this is the ONLY thing that worked-
    I took the USB connector cable out of the USB port it was in, and tried another one on the otherside of my laptop and iTunes was able to discover my phone in recovery mode. My phone was reset and everything is fine ( thank gosh for backup copies!)

  • IPod Touch still stuck on connect to iTunes screen after the restore. iTunes went blank.

    Hi, I'm having problems with my iPod Touch. My iPod went off because the battery was empty. And when I tried connecting it to my laptop to recharge, the "connect to iTunes" screen suddenly appeared. According to iTunes I need to RESTORE it for it to work. And that's exactly what I did. However, after the restore and all, the screen is still stuck on the "connect to iTunes" screen.
    By the way, it's a 2nd generation iPod Touch. And it's an MC model.
    And to make things worse, my iTunes screen is totally empty. The RESTORE option is gone and I really don't know what to do anymore.
    Hope you guys can help me out! I'd really appreciate it. Thank you!

    I really don't know what happened but my iPod Touch is working now!!! Thank you so much! I'm not really sure if it went to DFU mode or not but all of a sudden I can access iTunes App Store already!!! WOOOOAAAAHHHH! And it asked me to type in a new name for my iPod! So everything's good! Thank you so much! Thank you! You have no idea how happy I am right now!
    For my iTunes:
    Thank you!
    P.S: Grrrrrrrr! My bad! I'm new here and I kind of messed up the Correct Answer and Helpful Answer buttons. Sorry. Dunno how to change them.

  • IPod stuck in "connect to iTunes" screen after updating software

    I wanted to update my iPod touch to iOS5 after waiting for a long time. I synced and transferred purchases twice to make sure all my stuff was in my iTunes library, and then updated it. The update went fine but there was an error message saying that it could not restore the iPod. I went to troubleshooting and it said to update to the latest version of iTunes, which I did, involving a restart. When I started up iTunes again, it said it was the most recent version 10.7 and all of my songs, apps, etc. are in the library. The problem is I can't get my iPod to connect to iTunes now. It went into the connect to iTunes screen before I updated the software and it has stayed like that. I tried plugging and unplugging it, switching the USB ports and cables, putting it into recovery mode, but it will not show up on iTunes or on my computer. I also noticed that when I hold down the sleep/wake button for a few seconds, it shuts down immediately instead of having the "slide to power off" screen come up, and then the apple comes back onto the screen and it goes to the "connect to iTunes" screen again. I have tried all of the troubleshooting guides on the website, but it doesn't change the screen. I tried putting it into DFU mode and something came up on the computer saying "installing driver software" and it said DFU mode or something, which usually happens when I plug in my iPod, but after my iPod wouldn't turn on at first, and when it did, the same screen came up again. When I unplug it from the USB cable, it stays on the screen for about a minute before it turns off and the screen goes black. This is the screen it's stuck on
    I'm not sure what else to do, all suggestions will be greatly appreciated! Thanks so much.

    You try on another computer to help determine if you have a computer or iTunes problem. If it works on the other computer that indicates a computer problem and more work is required to fix that problem.
    If iTunes on the other computer yuo can do the following to make that computer the syncing computer until you can fix the other computer. For how see:
    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    Sync Your iOS Device with a New Computer Without Losing Data - How-To Geek
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • I am not able to move out of connect to itunes screen after pressing software updATE IN ipad 3 please help

    please help me how to get out of the connect to i tunes screen which came after trying to update software of ipad 3 through software update in the ipad i t is not coming out of the connect to itunes scree neither being able to switch it off

    Try and force your iPad into Recovery Mode
    1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
    3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.
    Note: Data will be lost. You may have to repeat the above many times.

  • Ipad stuck on connect to itunes screen but won't come up on computer in itunes

    Hi,
    I have just bought a brand new ipad mini. When i connected it to my itunes it needed to be updated so that is the first thing i did. As it was updating my laptop suddenly turned off therefore the update was not complete.
    Now my ipad is stuck on the connect to itunes screen, when i connect it to my

    Hi,
    I have just bought a brand new ipad mini. When i connected it to my itunes it needed to be updated so that is the first thing i did. As it was updating my laptop suddenly turned off therefore the update was not complete.
    Now my ipad is stuck on the connect to itunes screen, when i connect it to my laptop it makes the noise to say it is connected but does not come up in itunes so i cant restore it.
    I dont know what to do have tried everything i have read so far and none of it has worked!!!
    Please help!!!
    Thanks

  • IPod Touch 4G stuck on "connect to iTunes screen" after iOS 4.2 install

    Hi, I just got the new iPod Touch 4G. When I first plugged it into the computer, everything worked fine; iTunes recognized it, I set it up in iTunes, and I was even able to play with it temporarily. When I tried updating to the iOS 4.2, when the update was almost finished, I got an error message. Now it it just stuck on the "connect to iTunes screen"
    Yes, I have the latest version of iTunes.
    Yes, I uninstalled all Apple programs then re-installed iTunes (many times)
    Yes, I have updated the drivers
    Yes, my devices are "enabled"
    Yes, the Apple Mobile Device Service is started and automatic
    Any other ideas?

    I really don't know what happened but my iPod Touch is working now!!! Thank you so much! I'm not really sure if it went to DFU mode or not but all of a sudden I can access iTunes App Store already!!! WOOOOAAAAHHHH! And it asked me to type in a new name for my iPod! So everything's good! Thank you so much! Thank you! You have no idea how happy I am right now!
    For my iTunes:
    Thank you!
    P.S: Grrrrrrrr! My bad! I'm new here and I kind of messed up the Correct Answer and Helpful Answer buttons. Sorry. Dunno how to change them.

  • My iPhone 4 stuck in the "connect to iTunes" screen after trying to update to iOS 7

    Hey guys.
    So i have a pretty big problem here. Today after a little bit of work I updated my iPhone 4 to the new iOS 7. I went to bathroom at some point, while my phone was updating, and when i returned the screen of iPhone showed the "connect to iTunes screen" and no matter what I did, it just stayed there. iTunes doesn't recognize my phone anymore, doesn't matter how many time I plug it in and out. I tried this thing: http://support.apple.com/kb/HT1808 ,but it did not worked. I tried reinstalling my iTunes, but it did not work either. If the little things matter I left "lauch iTunes" box unchecked after reinstallation. Any help apriciated guys, im desperet here.

    YESSSSSSS HUGE PROBLEM!
    Iphone 4 downloaded ios 7 i hit the install button and the phone entered recovery mode and hasnt woke up since, tried tiny umberella and it wont kick it out of recovery mode. Itunes recognizes it in recovery mode, hit update restore, after the update nothing pops up or happens, and right back to square one like i never even updated or restored.
    Help pleaseeee

Maybe you are looking for

  • Cargo management tab is missing in Ocean freight booking

    Hi Experts, I found cargo management tab is missing in Ocean freight booking/ Transportation cockpit, though hierarchy types assigned for the functionality to create drayage orders. Please suggest if any configuration is missing. Thanks, Shakti

  • Director and Flash Paper

    Hi Adobe forums, I've just about putting the finishing touches together for an interactive CD at work using director 1.0.11. I've provided users with a print button that then in theory should open the corresponding flash paper file and then the user

  • Missing templates (Pages and Keynote)

    Could anyone please help answer if templates were removed and are not included in the most recent versions of Pages 5.1 and Keynote 6.1?    Specifically:   1) Did Pages 5.0 have a template for "Grove Surfboards?" 2) Did Keynote 6.0 have a template fo

  • PO or MIGO reference in Line item of cenvat clearing when MIRO posted

    Dear All, In J1IEX at the time of Part II posting in FI doc PO no is coming in cenvat Clearing line item. But when we post MIRO in that FI doc cenvat clearing line item there is no PO No which create problem in clearing the GL. I have refered the not

  • Black screen in i-mac

    Dear Apple Support I have problem in i-mac when i switch (ON)  my mac i hear the tone for start i-mac normaly but the screen is black. No light in the screen how can i know the problem hardwear or softwear and please help me to repair this problem. T