Cargo management tab is missing in Ocean freight booking

Hi Experts,
I found cargo management tab is missing in Ocean freight booking/ Transportation cockpit, though hierarchy types assigned for the functionality to create drayage orders.
Please suggest if any configuration is missing.
Thanks,
Shakti

Hi Matt,
you can find associations DRAYAGE_TOR (from booking to freight order(s)) and DRAYTOR_BOOK (from freight order to booking) under the ROOT node of business object /SCMTMS/TOR. If you check those in TA /BOBF/CONF_UI, you can also have a look at the corresponding implementing classes - however, there should be no need to do this
Technically, the references are stored on ITEM_TR level, but as determining the correct references can be tricky, I would strongly recommend to use the above mentioned associations in order to get the pre-carriage order (or booking vice versa), instead of trying to determine them on your own from various DB tables - we already implemented the tricky part in the associations, so there is no need for you to worry about that
Best regards,
Sabine

Similar Messages

Dump in Cargo Management tab

Dear all,
After the application of SP10 TM 110, the system is raising a dump when selecting the tab Cargo Management in a Ocean Freight Booking. It seems like attribute CONT_CNT_VAL_AQ_CA is missing after the SP upgrade. I havent found any note about it. Any help?
Best Regards, Marcelo Lauria

Please check if the following OSS notes can help you fix the problem you are encountering.
Note 1300229 - CL_OS_TRANSACTION dump when returning to calling application
Note 1276014 - Dump on CL_OS_TRANSACTION modules while calling BP from CIC0

Ocean Freight booking number from freight order - SAP TM

Hello experts,
I have a requirement to display Freight Booking Number on Adobe form (copy of standard SAP TM Form /SCMTMS/FP_FBL).
{ Steps to execute the form:- Go to NWBC - Freight Order Management - Edit Freight Order - Output Management - Generate List of Actions (Custom Action is configured here) - Document preview to open the form }
For the ocean freight order I need to display Ocean freight booking number on the form. Now on the print structure of the Form '/SCMTMS/S_PRINTOUT_FBL' only the existing document (ie freight order) related information is available not for the predecessor or successor documents.
I have found that these 2 documents (freight order & freight booking ) are related to freight unit (in my case ocean dry container) but I am unable to identify how they are directly related to each other in the system. Checked below link but still cant find any relation.
(Pick-up and Delivery Freight Orders - Freight Order Management - SAP Library)
Is there any way I can identify the freight booking number from freight order in SAP TM system?
Thanks in advance.
Puneet

Hi Matt,
you can find associations DRAYAGE_TOR (from booking to freight order(s)) and DRAYTOR_BOOK (from freight order to booking) under the ROOT node of business object /SCMTMS/TOR. If you check those in TA /BOBF/CONF_UI, you can also have a look at the corresponding implementing classes - however, there should be no need to do this
Technically, the references are stored on ITEM_TR level, but as determining the correct references can be tricky, I would strongly recommend to use the above mentioned associations in order to get the pre-carriage order (or booking vice versa), instead of trying to determine them on your own from various DB tables - we already implemented the tricky part in the associations, so there is no need for you to worry about that
Best regards,
Sabine

Few folders like Forwarding order management, Freight order management, Planning are missing in NWBC menu.

Hi Experts,
I found in my new system few folders like Forwarding order management, Freight order management, Planning are missing in NWBC menu (Ref. menuarea marked red in the attachment.).
So please suggest if any settings are missing for NWBC.
Thanks,
Shakti

Hi,
These are all the user parameters. We dont need to set anything here.
Please check your user roles. Goto SU01-> enter your sap user id-> press display-> Navigate to Roles tab and check all the specified roles are exist for your user.
Also please check the screenshots for the better understanding.
Regards,
Dinesh

Project - Change Management Tab missing

Hi Guys
After renaming a test Solution Manager, which is a copy from an existing System, Change Management Tab is not visible in the a Project Attributes.
Before the SID renaming, the tab was visible, but after chaning the name to SMT, it no longer appear.
When accessing SOLAR_PROJECT_ADMIN transaction, under System Landscape, there are only three tabs instead of four
Some logical relation is missing? Any idea where can I verify why?
Thanks!
Copied and Renamed system (SMT) with SOLMAN_ADMIN, client 200
Original System (SSM), user SOLMAN_ADMIN on Client 200

Hi,
as you copied the system, probably there is a missing entry which defines the client in which ChaRM will be active. Check in SPRO below "Change Management->Basic Configuration" the IMG activity "Activate Integration with Change Request Management->Activate Change Request Management and Set-up client". It must have your client 200 specified.
Regards,
Raquel

Why is that the switches tab is missing from device management page of my Aruba Central account?

Q: Why is that the switches tab is missing from device management page of my Aruba Central account?
A: Aruba Central is a cloud-based platform that enables you to manage your Aruba Wi-Fi network. Designed as a software-as-a-service (SAAS) subscription, Central provides a standard web-based interface that allows you to configure and monitor Instant Access Points (IAPs) and Mobility Access Switches.
Switches tab is available only when the end-user's aruba central account have the license to manage the switches. If only IAP license is available, then switches tab do not appear in device management page of Aruba Central.

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

BI Content Tab goes missing in between the Project

Hi Experts,
I have been finding a very strange behaviour in the BI 7 System of late. The BI Content tab has gone missing suddenly and its been more than a week till now. We have been installing and activating BI Objects regularly and suddenly one day its gone blank. I am a Tech Manager and was surprised when my consultant told me that BI Content tab is missing. I wanted to check if anyone else has faced this problem and if so whats the way out. Pls also let me know what are the reasons behind this so as to not repeat these mistakes in future. Would appreciate an immediate response - Swami.

Swami,
This is surprising.
Check, whether you are able to access BI content from menu (RSA1->Goto-> Install BI Content)
Adjust the screen resolution and check whether the BI content tab is hidden.
Also check in tcode : RSORBCT.
Ravi

Workload Analysis tab is missing in E2E Anaysis

Hi Guru,
I am in process of generating EWA reports for portal ,below are the steps I have completed successfully.
1. SMD agent installation on portal.
2. Defined portal system in SMSY.
3. completed SOLMAN_SETUP.
4. Completed Setup Wizard for managed system.
5. Deploy IS agent via SDM in Solman.
6. Introscope agent setup done for managed system
7. Managed system data is visible in IS Enterprise Manager.
When I checked t code solman_workcenter->RCAtab-> E2E Anaysis->selected the portal system i cant find Workload Analysis tab i.e Workload Analysis tab is missing could you please help me to resolve this issue.
System Configuratoi: SAP EHP 1 for SAP Solution Manager 7.0 and portal is netweaver 7.0
Thanks
Abullais

Hi,
Kindly check security guide for RCA authorization,
https://websmp102.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000718044&_SCENARIO=01100035870000000202
It may be due to authorization issue.
Regards,
Karthik

SC DPM 2012 r2 Console Crashes when attempting to Open the Management Tab after Update to RU2

Recently we Updated our DPM server to DPM 2012 r2 ru2 from ru1. and after that every time we open the management tab in the console it crashes with the following error
mmc has stopped working
Application Name: mmc
Application Version: 4.2.1205.0
Module Name: mmc.exe
Module Version: 6.3.9600.16384
Exception Name: System.NullReferenceException
Exception Point: Microsoft.Internal.EnterpriseStorage.Dls.UI.ObjectModel.AgentManagement.ProductionServerController.UpdateProtectionStatus
Other: AC213896
OS Version: 6.3.9600.2.0.0.400.8
Locale ID: 1033
at the same time the following event is logged in the application events
event ID 999
An unexpected error caused a failure for process 'mmc'. Restart the DPM process 'mmc'.
Problem Details:
<FatalServiceError>
<__System>
<ID>19</ID>
<Seq>0</Seq>
<TimeCreated>6/23/2014 4:25:37 PM</TimeCreated>
<Source>DpmThreadPool.cs</Source>
<Line>163</Line>
<HasError>True</HasError>
</__System>
<ExceptionType>NullReferenceException</ExceptionType>
<ExceptionMessage>Object reference not set to an instance of an object.</ExceptionMessage>
<ExceptionDetails>
System.NullReferenceException: Object reference not set to an instance of an object.
at Microsoft.Internal.EnterpriseStorage.Dls.UI.ObjectModel.AgentManagement.ProductionServerController.UpdateProtectionStatus()
at Microsoft.Internal.EnterpriseStorage.Dls.UI.ObjectModel.AgentManagement.ProductionServerController.OnUpdateProtectionStatus(Object unUsed)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
</ExceptionDetails>
</FatalServiceError>
We have updated the dpm agents on all of the servers that we back up by installing the update on the servers manually and according to the data in the DPM database it has acknowledged that they are indeed updated.
From what I can tell from the errors is the console is attempting to read the updateprotectionstatus from the database and it is not returning a value and thus causing it to crash. but I have no clue as to where this might be in the database to even
check if it simply missing from an update gone wrong.
I did notice that the update attempted to install twice through windows update and failed. The update does show as installed under installed updates in programs and features control panel
Any help on this would be appreciated as it does make it difficult to manage our dpm server

Hi,
See if this is relevant.
1. Take a DPMDB backup.
2. Open SQL Management studio and connect to the DPM instance.
3. Expand the DPM database and go to the table tbl_AM_Server.
4. Edit the table, and under the "ServerName" column check for the DPM server name. It should be the FQDN. If it is the NetBIOS name then change it to the FQDN.
5. Try re-opening the DPM console and navigate to the management tab and see if that works now.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

How to enable the cash management tab in payment method window in r12

Hey gurus,
when i am defining my payment method as cheque in Oracle Payroll in xx legislation.
The Cash Management TAB is disabled.
The following TABs are Enabled :
Source Bank,Costing,General Ledger,Other.
But Cash Management is disabled.
I think i am missing some profile option but i don't know which one.
Please can you help me gurus!

All modules are licesed ofcourse.
Its quite vague when u say necessary setups.
please explain me.
as normal setups of AP,AR and CE are done.
Payroll module is definately enabled.
Please help me gurus

Station Options - User Manager tab

Within the Station Options, I see the User Manager tab. If I use the default configure location, the Users.ini file will live in C:\Program Files\National Instruments\TestStand 3.5\Cfg\Users.ini. Is this where BOTH the development and target Users.ini file will live, or is this only the development location? If this location applies only to the development, where is the target location specified?

That's correct.
All of my deployments, locally and at our contract manufacturers, are connected to a network. For the CM's we provide an inexpensive server that is connected to the CM's network. The testers are connected to a network provided by the server. All test results go to the server. That makes it easy for both the CM and my company to get test results. Also, the sequence files, test steps, model files, etc. are all deployed to the server. This makes it simple to update all testers at once and I don't have to worry that one tester out of several and 3 thousand miles away missed getting updated. Servers are cheap.

'Project Cycle' tab is missing ...

Hi,
In t_code solar_project_admin I go to the 'System Landscape' tab, and then the 'Project Cycle' tab is missing ... exist only : Systems , Central Objects and IMG Projects tab.
Can any one of you help me in this regard.
Thanks
Venu Madhav

I had the same problem. Actually Jason is right, it's called "Change Requests" now. If you don't see that tab as well, go to SPRO --> SAP Solution Manager Implementation Guide --> SAP Solution Manager --> Configuration --> Scenario-Specific Settings --> Change Request Management --> Standard Configuration --> General Activities --> Activate Integration with Change Request Management:
1.) "Activate Change Request Management and Set-Up Client" --> set your CHARM client
2.) "Integration Solution Manager" --> Enter application S (Change Request Management) and destination NONE
--> IMG documentation says something it's not required nevertheless this entry must be maintained
3.) "Integration Change Request Management" --> enter
Appl                         +              Dest          +              +
CHARM                     W     NONE     CUST620     1.0
CHARM_DEST     W     NONE     CUST620     1.0
--> not documentated properly in the IMG documentation as well
For me, is was especially 2.). After I made that entry, I had the tab "Change Requests" ... and new problems ...
Cheers,
Andy

Cisco SRP527w can't find User Management tab

Hi,
Can anyone help me? I just bought a new Cisco SRP527w and I'm just new on this kind of equipment. I can't locate the user management tab as I'm trying to change the default password.
Also, I can't acess the internet. My dsl modem rj45 is connected to the WAN/LAN port with IP Static settings. What did I missed here? your help is much appreciated.

Hi Ronald,
In this case, I would be inclined to suggest that you try to use the SRP in place of the Bayan modem - this may be easier than managing the modem configuration to get traffic to and from the SRP efficiently. It's really your choice though at the end of the day.
If you replace the modem with the SRP, try the following (I referred to the following post for information):
Delete the second ADSL PVC you had configured above,
Edit the configuration of the first PVC (PVC0) and select:
Encapsulation = PPPoE
Username is your BayanDSL username with @sod at the end (i.e. myusername@sod)
Password is you BayanDSL password.
Set your VPI/VCI manually to 8 and 33 (or possibly 8/35 as you had before).
This should be enough. The IP address that Bayan has assigned for you should be assigned automatically during PPP initiation.
If this doesn't work, then it may be that your service is bound to the modem you have.
Andy

Unable to find the master data loaded request in manage tab

Hi All,
Iam unable to see the loaded request in the master data manage tab after some time of loading.
Immediately after loading i could see the request.If i revisit the manage tab,iam unable to see the request.
However data is available for the info object .
Can anyone please suggest on this.
Regards,
Kavya

hi Devupalli,
Note your request number, find it using RSRQ tcode. Now click on the target icon and see if it takes you to the manage of your infoobject.
There is a very common error which we sometimes make: are u sure you're checking the right thing? please check that if your infoobject has text, attribute and hierarchy, you're checking in the manage of the relevant one.
For ex, if you're loading text, you have to go to manage of the text.
Hope this helps!
Sheen

RH7: Project Manager Tab keeps refreshing continuously

I have upgraded my project from RH5 to RH7. There were in all 65 projects (.xpj) files that I upgraded. However, i have this issue with some of the files. When I open the xpj file, the Project Manager tab keeps refreshing. I cant scroll and select the files that are towards the end because the moment I click the scroll bar, the the tab refreshes and I cant click on the file.
Most of the files that I upgraded work fine.
Please suggest a solution. Thanks.

Have you tried renaming the CPD and reopening RH to make it create a new one?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Cargo management tab is missing in Ocean freight booking

Similar Messages

Maybe you are looking for