IPad has backlight but no video on screen

It is a 1st gen iPad, and the screen still appears to work. When I power it on, the Apple logo appears, and the screen is backlit, but after it gets done booting there is no image on the screen. Sound still works fine, and touch response swill works as well. I've tried holding down the power button and home button to do a reset to no avail. Anyone have any suggestions?

Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Similar Messages

I came home and attempted to power on my iPad2. I can see the backlight but nothing on the screen. When I try to reset by pushing the off button and the power button at the same time I can sometimes see the characters briefly but the screen has lines and

I came home and attempted to power on my iPad2. I can see the backlight but nothing on the screen. When I try to reset by pushing the off button and the power button at the same time I can sometimes see the characters briefly but the screen has lines. Can someone tell me if there is anything else I can do before a trip to the repair shop?
Will

If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

My Airplay is delivering Audio but no Video (black screen). The drop down box has a new selection "use airplay to; it does not let me select 'Mirror my IMac', it is stuck on 'extend desktop' any suggestions appreciated.

My Airplay is delivering Audio but no Video (black screen). The drop down box has a new selection "use airplay to; it does not let me select 'Mirror my IMac', it is stuck on 'extend desktop' any suggestions appreciated.

here is fix! i tried only step 1 and then restarted my computer and now it works. Choose remove All Files
Hope it helps.
https://discussions.apple.com/thread/5952624?tstart=0

HT5278 Since updating my iPad 2 to IOS6 and activating my icloud for backup, my iPad has permanently locked. Message on screen is "iPad Not Backed Up". I click ok but no response. Cannot turn power off and cannot restore via my pc itunes. What are my opti

Since updating my iPad 2 to IOS6 and activating my icloud for backup, my iPad has permanently locked. Message on screen is "iPad Not Backed Up". I click ok but no response. Cannot turn power off and cannot restore via my pc itunes. What are my options?

Thanks to everyone who responded and related subject helped. Holding the home button and power button simultaneously for 10-15 seconds does unlock the screen. I can now use my ipad again. However, a futher problem has arisen since updating to IOS6 and activating icloud at same time, Although not sure if its related. The problem is that when connected to my PC the itunes message appears 'Cannot read ipad'. It instructs you to restore but keeps timing out after about 1 hour. This maybe internet issue but can't understand why itunes cannot read my ipad. May need to completely erase all content & reset. Or any other suggestions why this has happened?

HT4174 Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... Hwo do I get the vido to show in the viewer?

Not sure what I did but projects are not showing up in the video window as i skim... Event footage does but project footage has sound but the video screen is gray... How do I get the vido to show in the viewer?

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

After exporting to quicktime file, the file has sound but no video, what am I doing wrong?

after exporting to quicktime file, the file has sound but no video, what am I doing wrong? The self contained movie box is not checked.

Hi
Did You go via Compressor ?
Did You use QuickTime Conversion ?
I don't
I do
• In TimeLine set In and Out-Points to the full Movie/Project
• Select ALL - Clips and Audio
• Go up to Sequence and down to Render Only - down to Mix Down Audio
• then Sequense and Render Selected - Both (Video and Audio)
• then Export and as QuickTime .mov (NOTHING ELSE)
• I use to do - Not Self-Contained as it saves both time and space
Your Start-Up (Mac OS) Hard Disk - Needs lot's of free space to work OK - I never go under 25Gb free space on this one,
Good Luck - Yours Bengt W

Burned dvd has audio but no video

Anyone ever have this problem: Burned a DVD from imovie and it works on the mac. When trying to play on dvd player, it has sound but no video. Anyone?

First thing you might do is in iDVD, use the menu option to "Delete encoded assetts" in case the previous garbage from the last project or burn is messing things up. If that doesn't work here are my standard list of things I do when I have issue or even just before I go to burn a new project...
Run Cache Out X (free download) to clear all system and application caches.
Run MacJanitor (free download) to do all the Unix Cron Maintenance scripts.
Run Disk Utility (Applications -> Utilities) and repair disk permissions on your start up drive (typically your internal drive). Also verify any other drives mounted on the system.
Run Preferential Treatment (free download) to check for corrupt/damaged application and system preference files.
Reboot your Mac.
Patrick

HT1766 My iPad has a frozen message on the screen which says "This iPad hasn't been backed up. Backups happen when this iPad is plugged, etc." I have connected the iPad to a power source and the iPad charged but the message is still frozen on my device.

My iPad is frozen with the message that the iPad is not backed up. I thought that it automatically backed up when I plugged the device into a power source. I have done that but the machine will not even open.

Try giving it a reset. Hold down the sleep and home keys for about 20 seconds or so until it reboots and see if that helps.

My ipad has disappeared but shows "offline" constantly so I cannot locate it. it

My ipad 2 WiFi (not 3G) has disappeared. It may be lost or stolen-we simply cannot find it. Last seen it was on standby mode.That was 9 days ago. It was 4 digit passcode protected. I have now activated the find my ipad app via icloud but it shows the device is constantly offline. (1) If it is lost then I presume by now the battery will have run down so it will carry on recording offline forever until we find it (unless it accidentally went in the bin with eg the newspapers) ? OR (2) If it is "stolen"/found by someone inclined to keep it would they be able to wipe it and use it for themselves and simply acquire new apps etc for it and have it good as new so to speak...? AND (3) If they do that is there any way I can check if there is "usage" / another user showing against my ipad serial number on Apple's records -not because I expect Apple to blacklist the device as I know they do not do that- but just so I can give up on this insane constant checking on icloud.com whether the find my ipad app has reverted to "online" so I can track its location? If there were usage then I would know once and for all that it has been wiped and is gone for good and I can move on and buy a new one but if there is no usage it would tell me it must be around somewhere and I should keep tearing the house apart to find it.....???

The same way that you would find a lost wallet.

Flash player is playing audio but no video (black screen)

I have a tablet running Android 4.04. I installed the latest flash player 11.3 from the google play store. It works fine when playing videos from the http://nieuws.vtm.be site with in the default (google) browser delivered with Android. When playing these flash-videos within the firefox beta version, only the audio works. The screen remains black.
I tried several videos and had always the same result.

In the Android Firefox Beta App I don't see any button from which I can get into the options tab. I only find a settings tab at the top right side, but this one does not show any options for enabling/disabling graphics acceleration. As extra information, the tablet I`m working on, is based on an Allwinner A10 (ARM8 1.2 Ghz + 400 Mhz Mali GPU) microprocessor.

5c has power but no video

screen has a blueish glow. we have reset but does not help. any solution out there?

You can try restoring it, but most likely, it's a hardware failure.
Make an appointment at the genius bar of your local Apple Store.

Video & Podcast has sound but NO video

When I sync video or podcast to my 30g Ipod, It just shows a small still picture with the title beside it. It does play sound but absolutly no video. How do I fix this problem?

On your iPod go to "Videos / Video Settings".
Then select "TV Out" and either set it to "off" or "ask".
Also, make sure you are accessing the video through the videos menu. If you have a video mixed in an audio playlist and you access it through that, you also won't be able to see the video.

Since 10.7 DVD Player has sound but no video

MBP with 10.7 is not showing video I get a black screen, although there is sound. DVD in question worked prior to upgrade.

I tried playing it in VLC while doing that I first closed DVD pLayer, then when I was waiting for VLC DVD PLayer opened up full screen and started playing, so I guess it resolved itself.

FCPX has audio but no video

Videos play fine in QTPro but when loaded into FCPX there is no video. What's going on here?
I just downloaded FCPX on a new MacbookPro ( MAC OS X Lion 10.7.1, quad core I7). FCPX is version 10.0.1 configured with most current updates. Videos have .mov extension and are DV 720 x 480 and were created in FCP 6 in when converting VHS to digital. Vids play just fine in QuickTime Pro on the MacBook. No prior version of FCP was present on the new computer. I'm pulling out what little hair I have left so any help or suggestions would be greatly appreciated.

I'm having exactly the same problem; it happens on every file I import regardless of file size. I've tried it on some quite small files (1 minute of AVCHD footage imported from DSLR, for example). It also happens on imported .mov files. The symptoms are:
1. Thumbnail image is visible in event browser
2. Audio waveform is visible in event browser
3. Skimming plays audio but there's nothing but a gray background in the canvas/viewer
4. Placing the playhead in the middle of the clip and pressing the spacebar to play results in an extended beachball (at least 30 seconds for even a short clip) followed by the appearance of a black video image in the canvas/viewer plus the audio playing normally.
I called AppleCare about this and we walked through some diagnostics; nothing fixed the problem, but creating a new test account on the Mac DOES result in the problem going away. Following this determination, I:
1. Deleted FCPX and all its projects, events, folders, and preferences
2. Booted to safe mode
3. Rebooted to user mode
4. Repaired disk permissions
5. Reinstalled FCPX from the App store.
No effect; the problem is still there. Clearly something about my user account settings, or something about other software installed, is causing the problem. However I cannot figure out what it is.

My iPad has suddenly gone to the White Screen of Death.

I have tried resetting, plugging into my Mac and going back to factory settings, all of the factory instructions have been tried. Tried holding the home buttton with the sleep button and even the up button. Nothing, absolutely nothing has worked. Getting the "error 37" when trying to reload the iPad. What now?

Let the battery drain.

IPad has backlight but no video on screen

Similar Messages

Maybe you are looking for