IPCCE 7 - Webview - when I getting report an agent appears twice

Hi All,
I was having a problem with an agent's name being in the Cisco database twice. In order to get any data for him I have to select both names. If I select just either one of them then there is no data available.
Prevously  I gave to this agent a new phone extension at Callmanager and IPCC staff , so was wondering if I could take out his name that is still associated with his old extension? Where do I have to find? I need leave only the new extension.
Thanks for your inputs
Andres

Login to the AW (either directly or remotely using VNC or MSTSC), open Microsoft SQL Query Analyzer, select the AW database from the drop down list, and type in the command and press "Execute".
If this is beyond you, do some reading on the Web about using Microsoft Query Analyzer. You really should have basic SQL skills to maintain and administer IPCC, so don't be afraid to start now.
Regards,
Geoff

Similar Messages

  • Why report section is appearing twice in the output of report designer

    Hi Gurus,
    I have created a report in the report designer and my report contains 5 sections.
    each report section is one query view.
    i inserted all the query views and done some formatting .
    but when i executed the report , one of the report section is appearing twice in the output.
    ex: i need the output like this
    section1
    section2
    section3
    section4
    section5
    But the output i am getting is as follows.
    section1
    section2
    section3
    section3
    section4
    section5
    report designer experts can please let me know why this problem is coming and also please provide possible solution for this.
    Thanks in advance.
    Raj.

    Hi Gurus,
    I have created a report in the report designer and my report contains 5 sections.
    each report section is one query view.
    i inserted all the query views and done some formatting .
    but when i executed the report , one of the report section is appearing twice in the output.
    ex: i need the output like this
    section1
    section2
    section3
    section4
    section5
    But the output i am getting is as follows.
    section1
    section2
    section3
    section3
    section4
    section5
    report designer experts can please let me know why this problem is coming and also please provide possible solution for this.
    Thanks in advance.
    Raj.

  • Sometimes when I get a text it rings twice

    iPhone 6 (but happened on my 4S too) -- with some texts... I get two notification sounds instead of just one.

    SMS has a limit of 160 characters IIRC. This means that larger messages are split into multiple messages (you normally get charged for each one). iOS glues these pieces back into one message (because the sender was typing one reply that was split by the carrier).
    Messages has a 'character count' setting in Settings app on iOS for seeing when you are about to go over the 160 character limitation, enable that to see if your SMS is getting a bit long .

  • When i run report through OC4J Application i get a exception message

    When i run report through OC4J Application i get a exception message saying Server returning invalid xml and the exception number is JBO -29000. The Reports Server is installed on machine having IP 10.191.99.254.
    Below is the exception message:
    (oracle.jbo.JboException) JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: java.io.IOException, msg=Server returned HTTP response code: 500 for URL: http://10.191.99.254:8888/reports/rwservlet/showjobidnull
    Anybody Please help me out with this issue.....because I am really fed up with this problem....want some urgent help.....
    One possible workaround which I could make out is there needs change to be made in the .rdf files in Report Builder and then inside the User Parameters we change the Initial Value to * from % because the Reports Server encodes every value as %Initial_Value% and hence if the initial value for the parameter is % then it does not get a valid value and hence it returns as an invalid xml
    But unfortunately it seems this workaround does not work.Please help as soon as possible.

    Hi,
    you said that some changes were made in the .xml files but i had said that all the files present in Reports Developer or Reports Builder are .rdf files and I had made changes in the .rdf files for this articular report and then compiled it thereitself and then ran a paper layout of the report but the report did not comprise any data.
    There was sufficient data also to populate the report. So this may not be a database issue. Please help if you can ASAP.

  • Question on "Get Reporting Statistic" and If statement issue

    Hello
    I worked up a "Get Reporting Statistic" in my script that looks for agents that are in the Not Ready state.
    Report Object:    CSQ IPCC Express
    Field:     Not Ready Resources
    Row Identifier:    Queue_Name   
    Result Statistic:    Not_Ready_Resources
    I have an If then statement:
    If(Not_Ready_Resources <1) then
    True - go to a prompt
    False - go to the queue
    It seems like this is behaving backwards. When I am logged in on my agent it seems to follow the True step which it should go to the queue. When I am logged out it goes to the false step, to the queue.
    Any thoughs on why it would behave backwards?
    thanks

    Apologies, replying via the email interface is a bit annoying.
    Your code is a tad confusing to begin with. Why are you checking to see if there are people in the not ready state before trying to queue?
    Instead a cleaner flow would simply queue first, play the prompt and any other actions in the queue step. This way your person is immediately placed in the queue and if someone is available they go straight to them otherwise they will hear your prompt. If I am understanding your code properly, the if statement is unnecessary.
    Regardless, why are you checking for agents not ready? (I'm honestly curious). Is there something more specific that needs to happen if an agent is not ready? Otherwise, your flow should be checking for Agents in the ready state
    if(Agents_Ready > 0)
         true:
              queue
         false:
              prompt
    but again this is entirely irrelevant considering:
    Select Resource Step
         queue:
              prompt
              // no available agents
         connected:
             //agents ready
    Perhaps I am completely misunderstanding? Apologies if that is the case.

  • Record of when a Supervisor makes an Agent Ready?

    Is there a record written somewhere of when a Supervisor uses the Supervisor Desktop to make an agent available? I haven't been able to find anything yet, I know you can get some details in HDS for instance of when a Supe barges in on a call, but no luck yet re: when a Supe makes an Agent available. Any suggestions are appreciated.
    Bill

    I believe you will need agent state trace enabled. There is an event name in the Agent_State_Trace table called
    MAKE_AGENT_READY (26) which should be what you are looking for. The data lives on the HDS database, and there is a built-in Webview report that displays the data from this table. Keep in mind Cisco recommends using the agent state trace feature sparingly due to the load it imposes on the system.

  • Get Reporting Statistic - Not Ready Resources

    Hi All - I have a script that currently checks for LOGGED IN agents .. If there are none, it goes to a voicemail. We have agents all over the globe and unfortunatly some stay LOGGED IN, but in a NOT READY state. Therefore the call goes into queue, and not routed to the voicemail.
    Does anyone know, if I change the "get reporting statistic" to look for NOT READY agents, vs. LOGGED IN agents, does it consider agents on a call "not ready"? Or will it look for agents that specifically put themselves into a NOT READY state?
    Thanks
    Jeff

    Hello Jeff, the agents on an active call will not count for the Not Ready state. When receiving the call (ringing) they will be placed in Reserved state; while the call is connected they will be in Talking state and after the call ends they could be placed in Work state for a while.
    HTH
    Pablo

  • Performance issues when creating a Report / Query in Discoverer

    Hi forum,
    Hope you are can help, it involves a performance issues when creating a Report / Query.
    I have a Discoverer Report that currently takes less than 5 seconds to run. After I add a condition to bring back Batch Status that = ‘Posted’ we cancelled the query after reaching 20 minutes as this is way too long. If I remove the condition the query time goes back to less than 5 seconds.
    Please see attached the SQL Inspector Plan:
    Before Condition
    SELECT STATEMENT
    SORT GROUP BY
    VIEW SYS
    SORT GROUP BY
    NESTED LOOPS OUTER
    NESTED LOOPS OUTER
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS OUTER
    NESTED LOOPS OUTER
    NESTED LOOPS
    NESTED LOOPS OUTER
    NESTED LOOPS OUTER
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    TABLE ACCESS BY INDEX ROWID GL.GL_CODE_COMBINATIONS
    AND-EQUAL
    INDEX RANGE SCAN GL.GL_CODE_COMBINATIONS_N2
    INDEX RANGE SCAN GL.GL_CODE_COMBINATIONS_N1
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES
    INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUES_N1
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUE_SETS
    INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUE_SETS_U1
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES_TL
    INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUES_TL_U1
    INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUE_NORM_HIER_U1
    TABLE ACCESS BY INDEX ROWID GL.GL_JE_LINES
    INDEX RANGE SCAN GL.GL_JE_LINES_N1
    INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
    INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
    TABLE ACCESS BY INDEX ROWID GL.GL_JE_HEADERS
    INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
    INDEX UNIQUE SCAN GL.GL_DAILY_CONVERSION_TYPES_U1
    TABLE ACCESS BY INDEX ROWID GL.GL_JE_SOURCES_TL
    INDEX UNIQUE SCAN GL.GL_JE_SOURCES_TL_U1
    INDEX UNIQUE SCAN GL.GL_JE_CATEGORIES_TL_U1
    INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
    INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
    INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
    INDEX UNIQUE SCAN GL.GL_BUDGET_VERSIONS_U1
    INDEX UNIQUE SCAN GL.GL_ENCUMBRANCE_TYPES_U1
    INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
    TABLE ACCESS BY INDEX ROWID GL.GL_JE_BATCHES
    INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
    INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
    INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
    TABLE ACCESS BY INDEX ROWID GL.GL_PERIODS
    INDEX RANGE SCAN GL.GL_PERIODS_U1
    After Condition
    SELECT STATEMENT
    SORT GROUP BY
    VIEW SYS
    SORT GROUP BY
    NESTED LOOPS
    NESTED LOOPS OUTER
    NESTED LOOPS OUTER
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS OUTER
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS OUTER
    NESTED LOOPS
    NESTED LOOPS OUTER
    NESTED LOOPS
    NESTED LOOPS
    NESTED LOOPS OUTER
    NESTED LOOPS
    TABLE ACCESS FULL GL.GL_JE_BATCHES
    INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
    INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
    TABLE ACCESS BY INDEX ROWID GL.GL_JE_HEADERS
    INDEX RANGE SCAN GL.GL_JE_HEADERS_N1
    INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
    INDEX UNIQUE SCAN GL.GL_ENCUMBRANCE_TYPES_U1
    INDEX UNIQUE SCAN GL.GL_DAILY_CONVERSION_TYPES_U1
    INDEX UNIQUE SCAN GL.GL_BUDGET_VERSIONS_U1
    TABLE ACCESS BY INDEX ROWID GL.GL_JE_SOURCES_TL
    INDEX UNIQUE SCAN GL.GL_JE_SOURCES_TL_U1
    INDEX UNIQUE SCAN GL.GL_JE_CATEGORIES_TL_U1
    INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
    TABLE ACCESS BY INDEX ROWID GL.GL_JE_LINES
    INDEX RANGE SCAN GL.GL_JE_LINES_U1
    INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
    TABLE ACCESS BY INDEX ROWID GL.GL_CODE_COMBINATIONS
    INDEX UNIQUE SCAN GL.GL_CODE_COMBINATIONS_U1
    TABLE ACCESS BY INDEX ROWID GL.GL_PERIODS
    INDEX RANGE SCAN GL.GL_PERIODS_U1
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES
    INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUES_N1
    INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUE_NORM_HIER_U1
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES_TL
    INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUES_TL_U1
    TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUE_SETS
    INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUE_SETS_U1
    INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
    INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
    INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
    Is there anything i can do in Discoverer Desktop / Administration to avoid this problem.
    Many thanks,
    Lance

    Hi Rod,
    I've tried the condition (Batch Status||'' = 'Posted') as you suggested, but the qeury time is still over 20 mins. To test i changed it to (Batch Status||'' = 'Unposted') and the query was returned within seconds again.
    I’ve been doing some more digging and have found the database view that is linked to the Journal Batches folder. See below.
    I think the problem is with the column using DECODE. When querying the column in TOAD the value of ‘P’ is returned. But in discoverer the condition is done on the value ‘Posted’. I’m not too sure how DECODE works, but think this could be the causing some sort of issue with Full Table Scans. How do we get around this?
    Lance
    DECODE( JOURNAL_BATCH1.STATUS,
    '+', 'Unable to validate or create CTA',
    '+*', 'Was unable to validate or create CTA',
    '-','Invalid or inactive rounding differences account in journal entry',
    '-*', 'Modified invalid or inactive rounding differences account in journal entry',
    '<', 'Showing sequence assignment failure',
    '<*', 'Was showing sequence assignment failure',
    '>', 'Showing cutoff rule violation',
    '>*', 'Was showing cutoff rule violation',
    'A', 'Journal batch failed funds reservation',
    'A*', 'Journal batch previously failed funds reservation',
    'AU', 'Showing batch with unopened period',
    'B', 'Showing batch control total violation',
    'B*', 'Was showing batch control total violation',
    'BF', 'Showing batch with frozen or inactive budget',
    'BU', 'Showing batch with unopened budget year',
    'C', 'Showing unopened reporting period',
    'C*', 'Was showing unopened reporting period',
    'D', 'Selected for posting to an unopened period',
    'D*', 'Was selected for posting to an unopened period',
    'E', 'Showing no journal entries for this batch',
    'E*', 'Was showing no journal entries for this batch',
    'EU', 'Showing batch with unopened encumbrance year',
    'F', 'Showing unopened reporting encumbrance year',
    'F*', 'Was showing unopened reporting encumbrance year',
    'G', 'Showing journal entry with invalid or inactive suspense account',
    'G*', 'Was showing journal entry with invalid or inactive suspense account',
    'H', 'Showing encumbrance journal entry with invalid or inactive reserve account',
    'H*', 'Was showing encumbrance journal entry with invalid or inactive reserve account',
    'I', 'In the process of being posted',
    'J', 'Showing journal control total violation',
    'J*', 'Was showing journal control total violation',
    'K', 'Showing unbalanced intercompany journal entry',
    'K*', 'Was showing unbalanced intercompany journal entry',
    'L', 'Showing unbalanced journal entry by account category',
    'L*', 'Was showing unbalanced journal entry by account category',
    'M', 'Showing multiple problems preventing posting of batch',
    'M*', 'Was showing multiple problems preventing posting of batch',
    'N', 'Journal produced error during intercompany balance processing',
    'N*', 'Journal produced error during intercompany balance processing',
    'O', 'Unable to convert amounts into reporting currency',
    'O*', 'Was unable to convert amounts into reporting currency',
    'P', 'Posted',
    'Q', 'Showing untaxed journal entry',
    'Q*', 'Was showing untaxed journal entry',
    'R', 'Showing unbalanced encumbrance entry without reserve account',
    'R*', 'Was showing unbalanced encumbrance entry without reserve account',
    'S', 'Already selected for posting',
    'T', 'Showing invalid period and conversion information for this batch',
    'T*', 'Was showing invalid period and conversion information for this batch',
    'U', 'Unposted',
    'V', 'Journal batch is unapproved',
    'V*', 'Journal batch was unapproved',
    'W', 'Showing an encumbrance journal entry with no encumbrance type',
    'W*', 'Was showing an encumbrance journal entry with no encumbrance type',
    'X', 'Showing an unbalanced journal entry but suspense not allowed',
    'X*', 'Was showing an unbalanced journal entry but suspense not allowed',
    'Z', 'Showing invalid journal entry lines or no journal entry lines',
    'Z*', 'Was showing invalid journal entry lines or no journal entry lines', NULL ),

  • Problem connection to database when opening Crystal Report in VB6 app

    Hi all, first post, so be gentle!
    I've developed a simple app and database using VB6 and SQL Server 2005 and is seems to be working well when i test it.
    Problem i have is after i installed the app on another PC. When the user tries to open the report they get an error when the report tries to connect to the database. It appears the report is trying to connect to the SQL Server using the user's AD account details, yet i set the report up with a trusted connection. I created a replica ODBC connection (as used by me when designing the report) on the users PC to see if that was what was missing. THis was set up to use the generic SQL Server logon details. Unfortubately the report is still trying to connect with the user's AD details.
    I had a bash at creating the VB commands to set the connection settings, but i couldn't get this to work.
    If anyone can help point me in the right direction or show me the correct code/steps to get th connection details correct, i'd be very grateful.
    Here is the code i have in my app:
    (Form1)
    Dim crxApplication As New CRAXDRT.Application
    Public Report As CRAXDRT.Report
    Private Sub cmdRunReport_Click()
    ReportPath = App.Path & "\" & File1.FileName
    If (File1.FileName = "SKU MTM Report - ADR.rpt" Or File1.FileName = "SKU MTM Report - BS100.rpt") Then
        Set Report = crxApplication.OpenReport(ReportPath, 1)
        Report.ParameterFields.Item(1).AddCurrentValue (Trim(DataCombo1.Text))
        Report.ParameterFields.Item(2).AddCurrentValue (Trim(DataCombo2.Text))
        Report.ParameterFields.Item(3).AddCurrentValue (Trim(DataCombo3.Text))
    End If
    frmreports2.Show
    End Sub
    (Form2 with Crystal ActiveX Viewer component)
    Private Sub Form_Load()
    CrystalActiveXReportViewer1.ReportSource = frmReports.Report
    CrystalActiveXReportViewer1.ViewReport
    End Sub
    Thanks in advance for any advice!
    Edited by: James McCaig on Feb 5, 2009 12:39 PM

    Here is an article on how to distribute the runtime using msm files. I think the articles was written in CR 9, but all applies, save the names of the msm files:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/901c0761-cf1d-2b10-dea4-8e83937a9337
    Note that you have to use a utility such as Wise, InstallShield, MS Visual Installer, etc., to create your deployment.
    I have also created a short wiki that describes the msm downloads for each version of CR:
    https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsReportDesignerComponentRuntimeDistribution-Versionspre8.0.xto12.0
    Ludek

  • Error when running a report in BPC NW

    I am getting the following error when running a report for my application in BPC NW.
    EVDRE encountered an error retrieving data from the Web Server (retrying in (X) seconds).
    This error comes with this dialog option box to either continue or cancel retrying retrieving data. Retrying doesn't help either.
    Any report I run (on any of my appsets), I get this error. I used the EVDRE function and also tried running a report using the template as the basis. But I get the error either way.
    Does anyone know why this error is occurs or how to debug this issue. I saw some information about this in earlier threads but could  not make much out of it.
    Appreciate any assistance.

    Sanjay,
      This  is a   very  generic  error...Couple  of  places  to  look  for....
    1)Reprocess the application (Modify application + Reassign SQL Index + Process Application)
    2)optimizing the application sometimes helps (Full Optimize + Compress Database + Index defragmentation).
    3)Create a "evdataserver_debug.txt" in user's private publication folder on  server side to populate very detail level logging  and  check  the  log on client side EVDRE_LOG.txt for  further  peek  into  where  things  are getting  messed up.
    if  evdataserver_debug.txt does not  get  populated on BPC 5.x...it  is  an  issue  with  IIS authetication on Application server.
    4)You have to check the event viewer into .NET server and also the BPC logs which can be found into
    BPC\Logging  for  further  details  ..
    Hope  this  helps..
    Edited by: Vishal Mahawadhi on Jun 24, 2009 9:50 AM

  • Error: Failed to open the connection when opening Crystal Report in CMC or

    Hello all,
    I am getting theError: Failed to open the connection when opening Crystal Report in CMC or Infoview
    with access database as the datasource which is in the network drive.

    Hi Sonali,
    This is because Crystal Reports does not recognize database connection from share drive
    1. Save the database locally on server machine
    2. Create a new database on server and link the new database with the database on Network.
    Steps to link the database.
    1.Create a new test database on server.
    2. Go to File --> Get External Data --> Link tables | Select the database on Network Drive.
    3. Select all the tables from the database.
    4. Save the Database  e.g. Test.mdb.
    5. Create an ODBC Connection on server machine, with the same name as on client machine using test.mdb database.
    Note: Click on Advanced button, enter the default user id and password for the odbc connection, it is not mandatory to give Login Name and Password, only if the user id and password are given then we need to provide the same user id and password in the CMC database configuration.
    6. Create a report using this ODBC connection, and save the report to Enterprise.
    Regards,
    Navin

  • Time out when run execute report on Webgui or transaction iView

    Dear All,
    We found the error as bellow when we execute report that load huge size of data so it would like many time to get it.
    500 Connection timed out
    Error: -5
    Version: 7000
    Component: ICM
    Date/Time: Thu Mar 6 19:33:49 2008 
    Module: icxxthr_mt.c
    Line: 2698
    Server: irpc16_QAS_50
    Error Tag: {-}
    Detail: Connection to partner timed out after 60s
    Anyone please tell us about the way to edit timeout of webgui or iView.
    Thank you very much,
    Anek.

    Dear Krishna
    It's helpful.
    Goto rz10 transcation
    Choose: Instance profile
    Select: extended maintaince
    Click: change
    Set value for parameter 'icm/keep_alive_timeout'
    If there is not parameter 'icm/keep_alive_timeout', create it.
    Save it.
    Restart SAP.
    Please tell me how to give point for you.
    Thank you for ur reply,
    Anek.

  • I have had bad luck lately I lost my computer to water cant be fixed and now my IPOD has been stolen when I get a new one how can I get my I tunes,games on the new one without my computer or old I pod

    I have had bad luck with electronics lately my computer got lost to water and cant be fixed now my Ipod has been stolen I reported it to Apple but now I need to know when I get a new one how can I get back my music and games etc. if I can get it just with my account

    What kind of iPod are you getting to replace it? If it is an iPod Touch, and you are in the US, after you set up the Touch you can use the iCloud beta and download your previous music, books and app purchases directly to your Touch.

  • Is there a way to affect the URL used when running a report subscription?

    We are using SQL Server 2008 R2.  I am finding out that when running a report subscription to extract a file in csv format, an extra blank line is created at the bottom (i.e., extra line feed), and the mysterious BOM characters also get inserted at
    the beginning.  Both of these "features" are causing problems with a client's import of these files.  Of course, it affects multiple clients.
    I have done some research and have found information on how to edit the rsconfigserver file to render CSV files using ASCII and to not use Excel formatting.  This removes both "features"/problems stated above.
    However, editing the server config file will affect all csv extractions on that report server.  Is there a way to control the URL of a specific report subscription to include these values (so only the reports that need the fix get it)?  For example,
    someone gave this URL as an example of how to add parameters including encoding in the URL.   http://MyReportServer/ReportServer?%2fReport+Folder%2fReportName&rs:Command=Render&rs:Format=CSV&rc:Encoding=ASCII
    Is there a way to have the report subscription run the report using a URL like this so it extracts it without the BOM characters?  I was thinking a data driven subscription would allow me to set the values like this, but these parameters are only pertinent
    AFTER the report is run and only needed for the final rendering.  Not sure how to do this. Maybe it's not possible. If it's not, that's fine.  I just need to write a proposal to our DBA's to talk them into making a couple edits to the server config
    file.
    Has anyone ever worked around this before in SSRS?
    Thank you!!
    Dana

    Hi DanaSSRS,
    According to your description, you want to have some report exported into CSV file with ASCII encoding when running a subscription. Right?
    In Reporting Services, when we run the subscription, it will call the Render Extension as we configured in rsreportserver.config file, we can't set the Render format with ASCII Encoding on subscription level. As you said, the Render Extension we configured
    in the rsreportserver.config will apply to all reports. In this scenario, you only want that extension apply to specific reports. For your requirement, we suggest you add a custom Render Extension in configure file. You just need to copy the CSV Extension
    and add a <OverrideNames/> to override a new name. Then set the <Encoding> in <Configure>. And you can select this custom Extension when creating the subscription. This might be the most effective workaround.
    Reference:
    Customizing Rendering Extension Parameters in RSReportServer.Config
    CSV Device Information Settings
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • How to get report of a sequence steps running in STA

    Hello Everyone!
    I am new here and don't know how to post a new question so please reply me.
    I am calling a sequence in STA and cannot get report of its steps. If i run indivisual steps from the sequence than there is report but when i run whole sequence there is no report of steps in it.
    I am using HTML report options and calling functions from a .Net API.

    any help guys..

Maybe you are looking for