Iphone 4 crashed while downloading latest ios 7 software and wont turn on, stuck on the picture of plug into itunes? what do i do now?
Help me please
The device is in recovery mode. Do exactly as the image on the screen suggests, connect it to a computer running iTunes and restore.
Similar Messages
-
i plugged a usb in to my macbook pro and rhe computer went off and wont turn back on. the power light doesnt light. what do i do??? help!
Do you have Apple Care? Is there an Apple Store near you?
Sounds like a hardware fault... -
hello ?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..
Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
iTunes free download from www.itunes.com/download -
I have an iPhone 5, yesterday it wasn't receiving any signal. I reset it and when it cam back on it said plug into iTunes, i did that but now it comes up with error 9006 and 39. What do i do, i have tried different wires, and different plug in holes, I've left it for the night and tired again this morning.
Error code 9006 is related to the computer's security software settings, 39 is not listed inResolve iOS update and restore errors try turning the security/anti-virus software off if you are using something like that. Then you may need to restore via the recovery mode since that is what the graphic of a USB wire connecting to iTunes means, it has already entered recovery mode...see http://support.apple.com/kb/HT1808 for instructions on recovery mode restoring.
-
I updated my iphone4 and now it won't do anything it just tells me to plug into itunes what do I do
Hello h4davis,
Thank you for the details of the issue you are experiencing after updating your iPhone. If you have not resolved the issue, I recommend following the steps in the article below for an issue like this:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I'm trying to update my daughter's Ipad2 to the new IOS 8 and it's got stuck on the connect to ITunes display. We don't have a computer to connect it to and it's never been connected to one. How do I get past this?
You can try a soft-reset of pressing and holding both the home and sleep buttons for 10 to 15 seconds so that it reboots, but you are likely to get the same screen. If it does then it will need to be connected to a computer's iTunes so that it can be reset back to factory defaults - do you have a friend with a computer with iTunes installed on it, or is there an Apple store nearby that you could try going to (if there is then preferably make a Genius Bar appointment at it, or don't go at a busy time) ?
Has she been backing up to the cloud ? If she has then she should be able to restore to that. If not then what she can redownload for free from the stores will show in the Purchased tabs in the store apps. -
My phone started resetting today over and over and then shows the icon to plug into itunes. When I tried plugging in, a message pops up saying that itunes can't connect because my phone has a passcode and i need to unlock it to connect. my phone won't let me do anything more than make an emergency call. it wont give me the option to enter my passcode to unlock the phone. What can I do?
After a visit to the apple store, they were able to get through my pass code but unfortunately I found out that is was a problem with the logic board. Since Apple only wants to sell and not fix, I was able to locate an iphone repair near me that deals with logic boards and they are currently working on it right now. i should be getting it back soon. Im not sure if the problem you are experiencing is the same as i went through but it does sound like it may be also a hardware issue and would suggest searching online for an iphone repair place that can diagnose what exactly is wrong. Hope this helps.
-
I have a Mac computer and am trying to use a Photoshop CS4 program, but after accessing my desktop files through Adobe Bridge and clicking twice on any of the pictures to get into Photoshop, instead of entering photoshop, I get on the lefthand side an enlarged version of the picture with red, yellow and green buttons on top. Any suggestions on what is wrong, or what can be corrected ?
And there is the problem. Your pictures are opening up in Mac's own Preview app.
Do you want all your jpegs to open in Photoshop, or only when you are in Bridge?
Selecting a program to open a certain file is called: File Type Association.
You can choose this at the MacOS level or the Bridge level.
Here's how to do both:
Either MacOS or Bridge has the wrong app associated with the jpeg. Let's start with MacOS
Close Bridge and Preview. Select one of your jpegs, and press Cmd i, That will bring up the file info window.
Go down to the "Open with" section of File Info.
Choose Photoshop CS4 and click on the Change All... button to apply this choice to every jpeg on your Mac.
Then open Bridge and see if double-clicking opens it in Photoshop.
Now that means all jpegs on your Mac will open in Photoshop. Maybe you don't want that.
You can set your jpegs to open in Preview when Bridge is closed.
When you open Bridge, there is Preferences > File Type Associations where you can direct Bridge to open the jpegs in Photoshop when you are viewing in Bridge. -
I was on the facebook app last night and my ipod closed the app and now wont turn on or do anything even when plug into my laptop :/ help anyone
Try here:
iPod touch: Hardware troubleshooting -
I just downloaded the ios 5 and my ipod is stuck on the apple logo
help! i tried to update my ipod to the ios 5 and it said it cant be updated and my ipod got stuck on the apple logo and i cant turn it on or off and my computer cant recongize my ipod so i cant restore some please HELP!!! ASAP thx
Did you try to connect in recovery mode?
iOS: Unable to update or restore
iOS: Not responding or does not turn on -
I conected my iphone 3gs to Itunes It says there was an update so i agreed it also recommended I do a back up so I agreed. then half way through the process it failed and a message popped up saying unable to contact server try again later. and alls I have on the phone now is a picture indicating to plug into itunes.
Any Clues ???? as when I plug in it says I need to restore the phone and it fails again. it was working fine before I did the updateIs this phone locked to a cell carrier?
-
When I connect to itunes. It does not recognize my ipod and said I need to restore. I have tried to restore which says will take 4 hours but it never completes. The ipod still has the picture of "connect to itunes" Please help. I have tried to figure this out for days.
You might tell us many more things so we don't have to guess and might be able to help.
What computer do you have?
What iTunes are you running now?
What OS X system are you running are your computer now? Or is this a Windows machine?
Let us know a little more info. -
Downloaded latest IOS update and now can't open apps or mail attachments. Help?
Just downloaded the latest IOS update on my iPad and now can no longer access app's or attachments in my mail box.
I am receiving my e-mail but cannot access the internet, Google etc
Does anyone have any suggestions?
Many thanksTry a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
-
I had 67% power at 10 am but when I went to lunch at 1 my phone was dead. I tried plugging it into a power source but it still wont turn on, and as previously stated my lock button is broken. How do I turn it on?
If that is not successful try the remaining items of:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
not seen by pc on itunes with usb cable. holding sleep/wake button does nothing. only button that works is the on/off button. all I get is the apple screen WTH!
try this
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
Maybe you are looking for
-
Error Message is not displayed on the pop screen for chain end chain
Hi, I have called a screen in one of the standard program using enhancmenets, and i had put validations using chain and end chain, but the error message is not displayed immediately on the screen but it is displaying as log , i want the error should
-
Mid-Level Integration/Software Engineer Position
Mid-Level Integration/Software Engineer Position We have an immediate need for innovative, results-oriented people that desire a challenging, fast-paced environment in which to apply their skills. The ideal candidate is highly motivated and possesse
-
2 Ipods on one Computer? please Help!
Hi. I bought an 80 gig iPod about 4 months ago. Have had NO problems. Today my girlfriend bought a 30 gig iPod. I plugged in her iPod and registered her iPod with my/the same information already existing. WAS THIS A BAD THING? Now her iPod is downloa
-
Multiple account assignment PO with Asset
Hi all I am making an Asset PO with quantity 5 and with multiple account assignment selection & distribution on qty basis with different Asset No. for each In this PO the octroi charges are maintained. during the MIRO simulation the delivery cost is
-
Good morning guys, I dont know at where to give the points for the answers. pl help me. Thanks in advance. HAVE A NICE DAY