IPhone audio out stuck on 'headphones'

When I make a phone call, or recieve one, I do not hear any audio coming from the normal top speaker on the phone.  The person on the other end can hear me.  When i adjust the volume I see that it says 'headphones' on the screen, as though I have some plugged in.  I dont.
I encounter the same problem across the ipod, youtube etc, not just the phone app. 
When I do plug in headphones, I can hear everything normaly with no problem. 
I have restarted, and hard reset the device several times. 
Anyone have any thoughts?

The phone did not recognize that you unplugged the headphones. While the phone is active insert and remove the headphone plug a couple of times. this will usually fix it. If it doesn't there is dirt or moisture in the headphone jack, or the jack is broken.

Similar Messages

  • Iphone audio is stuck on "headphones"

    after using earphones last week (i've used same earphones many times b4 w/o prblms)
    my iphone audio got stuck on "headphones" mode, forcing me to listen to all my calls in spkr phone mode. Have tried rebooting...no luck.
    Anyone experienced this audio lock b4 ? Any idea how to rectify ???

    Try inserting and removing the earbuds several times in a row. If this doesn't work, have you checked inside the earbuds port for any lint or foreign material? It doesn't take much.

  • HT3310 why did my iphone 5 always stuck on headphone mode

    why did my iphone 5 always stuck on headphone mode

    Try plugging your headphones in/out about 20 times.
    Try cleaning your headphone jack and dock connector.

  • My iphone 4 is stuck in headphone mode.  Is there a way to switch it back??

    my iphone 4 is stuck in headphone mode.  Is there a way to switch it back??

    fixed it myself with reading other peoples review...   sucking the air out multi times and holding the center button down & turning the phone off at the same time     It took aabout 4 times but hopefully it stays normal

  • HT4806 Mac mini digital audio out through the headphone jack

    I'm misled by this sentence for audio out port from the support page: "For digital audio, you can use Apple iPhone headset with microphone".
    http://support.apple.com/kb/ht5539
    It is there for all mac minis starting from 2010 model.
    Does it mean electrical digital signal? Any chance to get S/PDIF coaxial signal?

    If an optical signal is OK,  you just need one of these:
    http://www.amazon.com/dp/B00016W6Y6
    To convert the optical signal to a co-ax one will need a more complex/expensive convertor.

  • Headphones in, audio out laptop and headphones

    Hello, I've recently purchased a Toshiba Satellite S55-A5295, with Windows 8 x64 bit, and have been having some troubles with the audio output.  When I plug my headphones into the computer, the audio either only comes out of the computer speakers, only out of the headphones, or out of both.  It's been like this since I bought it, and I can't figure out how to fix it.  I've tried setting my headphones as the defualt audio device, but when I plug them in, they don't come up as an option. I've tried finding the drivers, so I can reinstall them (It seems to be successful in the other posts') but I don't know which drivers to download, and I'm afraid of messing it up even more. Help would be greatly appreciated. Thanks
    Solved!
    Go to Solution.

    Thanks for the detailed information. Try reinstalling this driver:
    IDT Audio driver File: tca0096000g.exe Version: 6.10.6472.0 Posted Date: 2013-05-23
    - Peter

  • My iphone 5 is stuck in headphone mode and wont let me take calls

    I CANNOT GET MY IPHONE OUT OF HEADPHONE MODE.  IT WILL NOT LET ME TAKE CALLS OR PLAY ANY AUDIO WITHOUT THE HEADPHONES PLUGGED IN.  IS THERE A SETTING I CHANGED?

    What exactly happens when you try to restore via iTunes? Error message?

  • Iphone audio out put swtich

    hello every one i had a question that i need help with. i need to know how to manually disable and enable the headphone jack so it will only use the speaker for audio playback i need to do this because i have an otterbox armor case and i really dont like using the speaker phone function to make calls and dont like using my headphone either so if any one knows anything that could help that would be nice

    ps
    It plays fine thru the iphone's built-in speakers.
    syndi

  • My iphone 6 is stuck on headphones mode.

    I hadn't used the headphones before this happened. I've tried cleaning out the jack with a match (it looks very clean) and plugging the headphones in and out several times whilst watching a video. Neither worked.
    Any ideas?
    Thanks.

    I Had this issue for the first time the other day...
    I have an iPhone 5s and I don't think I've even used the headphone jack on this particular phone, because it's a replacement phone for a previous phone where the sleep wake button wouldn't work.  The other day I could not hear any phone calls and less I put it on speakerphone or I put in a headphone set.  I first did a hard reset on my phone, then I rebooted it and it went away it hasn't return sense but, people are now complaining that they cannot hear me when I'm talking not on speakerphone.   Three people have now told me that it sounds like I'm going in and out of the tunnel, and it's intermittent.   My call either sounds completely clear or it sounds like I'm in a tunnel.  Got to tell you it's a little bit annoying, and it makes me not want to upgrade to the next iPhone even though I'm eligible.  This is my third iPhone five because all the iPhones I've had so far in the five series had problems that required insurance claims. And of course when you have a cell phone provider and you do an insurance claim, they send you a refurbished phone

  • Dropped My iPhone in water Stuck in Headphone mode

    Last night around 11pm, I was getting up off the toilet, and my phone fell out of my pocket and into the toilet. I didn't think I instantly scooped it out of the toilet, popped off the case for the phone, dried it off with some paper towels, shut it off and threw it in Rice.
    This morning around 7am, I turned it on. Turned on just fine, didn't think anything of it. Got into my car, plugged her into the Aux port, played music just fine.
    However when I unplugged it, no sound was coming from the phone. I plugged headphones into it and sound came out, pulled them out and nothing.
    my "Ringtone works just phone when I receive a call playing through the speakers, but when I go to pick it up, I hear nothing. I have to plug my headphones in in order to head them.
    iPhone 6 plus 128GB.
    Things I've Tried:
    -Plugging the Headphone Jack in and out (7-10 times)
    - Blowing into the Headphone Jack
    -Sucking the headphone jack
    -Poking the headphone jack with a paper clip.

    I did mention the phone was in an Otterbox case correct?
    Where exactly did you mention it

  • Audio out both through headphone and and speaker (line out!)

    Using latest Snow Leopard with latest Windows 7 and Bootcamp 3.0 drivers.
    Everytime I plug in the headphones from the front of the Mac Pro, the speaker doesn't mute. I get sound out of both connections.
    I downloaded the latest drivers from Realtek and the same thing happens.

    Using latest Snow Leopard with latest Windows 7 and Bootcamp 3.0 drivers.
    Everytime I plug in the headphones from the front of the Mac Pro, the speaker doesn't mute. I get sound out of both connections.
    I downloaded the latest drivers from Realtek and the same thing happens.

  • Switching iPhone audio out when lightning plugged in

    Is it possible to switch an iPhone's audio output to "iPhone" while it is plugged into my car's USB to charge? ie so I can hear alerts, messages etc. while listening to the radio?
    It seems audio automatically switches to USB when plugged in, with no way to override it.

    Basics from the manual are restart, reset, restore from backup, restore as NEW device.  If those don't solve your problems, you'll need to go to Apple for evaluation.

  • IPhone Audio out Jack.

    Guys, just got my new iPhone and very nice it is too. Now I want to connect it to my car which has a built in 3.5mm jack for devices like iPods/iPhones. The two plugs, (iPhone headphone plug and my own extension) are identical in length but they differ by the number of sections each has;
    http://www.piccow.com/viewer.php?file=4d3o12_photo.jpg
    A standard stereo jack has 3 sections, one ground and two signal. Why does the Apple one have four? Does the extra part serve another function?
    Message was edited by: gumsie

    http://www.macworld.com/article/132284/2008/02/iphone_adapters.html

  • My iphone 4s is stuck on headphone mode have no sound cannot hear when i answer calls no sound but they can hear me

    cannot get my phone off of headphone mode cannot hear anything when i answer calls no sounds from it but the other person can hear me

    hey i had the same problem, look and i fixed it just slightly tighten the 2 screws on the bottom of the phone with the tip of the knife or a small screw driver!! and now my phone works perfectly
    guys it really worked trust me

  • My iPhone 5 is suddenly having audio issues through the headphone jack.

    So this is a strange situation, and I'll try to explain in depth so that someone might be able to suggest a solution. As reference, I have an iPhone 5 that I purchased in late-February. I've had every other model of iPhone except for the first iPhone, so I am pretty familiar with the device. I used to be on AT&T, and switched to Verizon when I upgraded to the iPhone 5.
    Two days ago, I was on a six hour road-trip, and I'd been playing my music like normal through my car's auxillary cable. After stopping for lunch, I went to plug my music again, but once the music started to play, I realized that only the drums were playing at normal levels while the vocals were very, very soft. I switched through a few different songs, and realized that all the songs were being played at different levels; sometimes the backup vocals were normal levels while the instrumentation and lead vocals were quiet, or vice versa. I decided to plug my iPhone in to charge, and when I did this, the audio levels were all normal. However, the iPhone was NOT charging. I removed the charger, and the audio went back to being weak and distorted. I went back and forth at this for a bit, trying to figure out what was going on.
    Since then and after some testing, I realize that my iPhone will now only charge anywhere EXCEPT in the car charger (I simply use my USB cable that came with my iPhone and plug it into the power adapter I have in the car). This morning, I tested the audio in my home speaker system, and I had the same audio issues. Only half the song's tracks would be at normal audio levels, while the other half would be at a very quiet, almost nonexistent level. I tried plugging my charger into the phone to see if that'd make a difference, but instead of the audio going back to normal like it does in the car, the music stopped and there was just crackling and very noisy distortion sounds.
    I'm super confused and not sure what to do. This has never happened to me with any of my iPhones. I am updating my software right now, and am hoping that that may help somehow. Otherwise, I'm at a loss. Any suggestions as to what I should do would be greatly appreciated!

    Do the new iMacs have digital audio out through the headphone jack?
    Yes.
    http://support.apple.com/kb/SP576

Maybe you are looking for

  • Problem in calling concurrent request from oracle forms

    Hi, I am using the following code to call the above concurrent request to transfer the data from AR interface table to the base table. req_id := FND_REQUEST.SUBMIT_REQUEST('AR','RAXMTR','','',FALSE, '1', '1023', 'CONTRA', '2009/10/30 00:00:00' ,'',''

  • Rebate accrual up to certain quantiy

    Hi, We have an requirement where in rebate needs to be accrued only for certain quanity. For Eg:- Material A, Quantity is 1600 PCs, so rebate should accrue for all customers for specific materail  only for 1600 pcs . Once system reaches 1600 pcs accr

  • Archiving in SAP 4.5b

    I'm trying the archive process in our system. After modifying all Customizing settings and adding new variant and executing the archiving process, i found out that i have entered wrong parameters in the variant that i created. so i cancelled the proc

  • Posting priveleges suspended "for a period of time".  Over a week later...

    Got caught up in the iPhone furor and had some posts deleted and my account temporarily suspended. It's been over a week and I still can't post. Anything I can do to get it going again? How long is "a period of time"? -TX Ciclista

  • How to get rid of PhotoShop as default

    I use a different program as a default when I load pictures from my camera. Since I've installed PhotoShop Starter - it automatically pops up to download camara photos. My other program still downloads programs as well. I can't seem to find any optio