[iPhone] Certificate found when no name given, but provisioning not

I haven't done any iPhone programming for two months or so. I'm also using a different device now and don't have access to the previous one for testing (it was replaced by Apple).
So yesterday I created a provisioning profile for the new phone and downloaded my certificate again. The certificate no longer shows up under "My Certificates" in the keychain, but that seems to be the way it should be according to the screenshots in the docs on the portal page.
Now my problem is that when I only enter "iPhone Developer" in the code signing identity, it is found and I can pick the new provisioning profile from the drop-down list right below. But then, the code signing fails when I do a build. When I add my name, it doesn't find the certificate and it doesn't show me any provisioning profiles. I tried that several times, and even copied&pasted the name of the certificate from the keychain.
Any ideas what I'm doing wrong?

I haven't done any iPhone programming for two months or so. I'm also using a different device now and don't have access to the previous one for testing (it was replaced by Apple).
So yesterday I created a provisioning profile for the new phone and downloaded my certificate again. The certificate no longer shows up under "My Certificates" in the keychain, but that seems to be the way it should be according to the screenshots in the docs on the portal page.
Now my problem is that when I only enter "iPhone Developer" in the code signing identity, it is found and I can pick the new provisioning profile from the drop-down list right below. But then, the code signing fails when I do a build. When I add my name, it doesn't find the certificate and it doesn't show me any provisioning profiles. I tried that several times, and even copied&pasted the name of the certificate from the keychain.
Any ideas what I'm doing wrong?

Similar Messages

  • When I touch buttons voice names them but does not really respond.  What should I do to restore normal work?

    When I touch buttons voice names them but does not really respond.  What should I do to restore normal work? Thank you

    I have the same problem, its an ipod touch, the most recent version, for my granma. she is blind. it wouldn't respond when you pick something, double tapping or even identifying it when either of use it.
    i can see that i am tapping the buttons in VO mode and it doesn't respond. It also says to scroll with three fingers and that takes 20 tries to get to work. I bought this for my grandmother to use VO and it doesn't work. Its a load of crap. I thought if I updated that might help, it doesn't need to be updated.
    And the voice speed is almost at the lowest and it still talks fast.
    It is ridiculous to have a feature like this and it not be useable. Disgruntled and disgusted by Apple's disregard for the people who could most benefit from this type of technology. I've looked on websites for the blind. So far, no help or advice.

  • ICloud password works on everything but erasing all data. I got a new iPhone and need to wipe this one but am not sure how else to do this since the password is not working. Any suggestions?

    iCloud password works on everything but erasing all data. I got a new iPhone and need to wipe this one but am not sure how else to do this since the password is not working. Any suggestions?

    Firefox also makes regular backups of your bookmarks in a folder named bookmarkbackups in your personal settings folder. You can restore the backup to your new Firefox, but unlike importing the HTML-format file, it is a complete drop-in replacement, so if you have saved new bookmarks you do not want to lose, the export/import method may work better for you.
    By default, Windows hides your personal settings folder so the easiest way to access it is from inside Firefox. You can use either:
    * "3-bar" menu button > "?" button > Troubleshooting Information
    * (menu bar) Help > Troubleshooting Information
    * type or paste about:support in the address bar and press Enter
    In the first table on the page, click the "Show Folder" button. This will launch a window showing your Firefox settings files.
    You might want to back up this whole folder if you have other data you want to preserve from your XP computer.
    Either way, you should find the bookmarkbackups folder here and when you click into it, find maybe 10 files with dates in their names.
    The procedure to restore the file once you have it on removable media or some other convenient place is described in this article: [[Restore bookmarks from backup or move them to another computer]].
    Regarding the other files and what you might find of use: [[Recovering important data from an old profile]].

  • I need to move my photos and contacts from my old iPhone 3 to my new iPhone 4.  When I open iTunes, it is not letting me sync my old phone so I can back up to my new phone.  Any thoughts?

    I need to move my photos and contacts from my old iPhone 3 to my new iPhone 4.  When I open iTunes, it is not letting me sync my old phone so I can back up to my new phone.  Any thoughts?

    Buy a Mac OS X 10.6 DVD from the online Apple Store, install it, and run Software Update twice.
    (96978)

  • HT4528 My iphone 4s is connected to my wifi but will not connect to internet

    My Iphone 4S is connected to my wifi but will not connect to the internet.  Does anyone know how to fix this?

    Try going to settings>general>reset>reset network settings. Once you've reset your network settings you will need to be able to plug in your wifi/router password to your wifi appliance. (password to wifi router)
    Good luck.

  • IF YOU HELP MY NANO upgraded when you install PERFECT BUT DOES NOT APPEAR ON THE SCREEN NOTHING BUT as if you were OFF if turned PLEASE HELP OR MORE AND HAS THE NEW UPDATE

    IF YOU HELP MY NANO upgraded when you install PERFECT BUT DOES NOT APPEAR ON THE SCREEN NOTHING BUT as if you were OFF if turned PLEASE HELP OR MORE AND HAS THE NEW UPDATE

    iPod not recognized in 'My Computer' and in iTunes for Windows

  • After the trial period I bought when starting an application, but does not advance. As I can activate it?

    After the trial period I bought when starting an application, but does not advance. As I can activate it?

    Hi,
    Do you get any error while activating Muse, or could you please provide some more details.

  • Getting "No trusted certificate found" when attempting to connect to 10g DB

    Greetings,
    I have an Oracle 10g DB configured to listen via TCPS. I am able to tnsping and sql+ into the DB just fine. However, when attempting to connect via SQL Developer, I get the following error:
    *"Status: Failure -lo exception: sun.security.validator. ValidatorException: No trusted certificate found"*
    Here is my tnsnames.ora entry:
    EMCECCH01.CORPORATE.MY.COM =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCPS)(HOST = emcecch01.corporate.my.com)(PORT = 1575))
    (CONNECT_DATA =
    (SERVICE_NAME = rambdb)
         (SECURITY = (MY_WALLET_DIRECTORY = C:\DBSafes\Cincinnati\dbSafe))
    Obviously when I create my connection, I am using 'TNS'. I've also attempted to connect via the JDBC thin driver, but when testing the connection, it just sits and spins without ever returning a result. Here is the URL I'm using:
    jdbc:oracle:thin:@emcecch01.corporate.my.com:1575:rambdb
    I've verified that the appropriate JAR files are in place in the jlib directory.
    Any advice in this matter would be greatly appreciated.
    Regards

    Hi,
    If your connection entry is unusual you could try these simple things that may cause variation/different code paths:
    1/ORACLE_HOME being set /unset by for example a bat script before launching sqldeveloper [see in sqldeveloper help/about/properties/ oracle.home and jdbc.library to see what oracle is using]
    (you could be using sqldeveloper or other oracle install jdbc)
    2/Tools/preferences/database/Advanced Parameters/Use oci thick driver set/unset
    (you could be using 'pure' jdbc thin or 'mixture of c & java' ie. thick oci driver using another Oracle Home or instant client)
    3/use Connection type=advanced then you can enter a fancy description (these descriptions are simple but you could have load balancing for example):
    thin is pure java
    jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=MACHINE_NAME_OR_IP)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=dev11gr1)))
    oci8 is thick/c/oci-java
    jdbc:oracle:oci8:@(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=MACHINE_NAME_OR_IP)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=dev11gr1)))
    (or get SQLDev to look up tnsnames.ora, connection type = tns might work)
    Please post your findings and put in an enhancement request for particular connection feature support, documented with a test case.
    -Turloch

  • Iphone 5 was sent to get unlocked but 'sim not valid'

    My phone was given back to me on wednesday the 21st Januray after giving it to get unlocked on monday 19th january. The phone was locked to vodafone and now should be on giffgaff and unlocked to all networks.
    The guy said it can take upto 3-5 days for the phone to work with the new giffgaff sim, it is not the 5th day and it is still not working and it says
    SIM not valid - the sim card that you currently have installed in this iphone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iphone. Please insert another SIM card from a supported carrier or request that this iphone be unlocked by your carrier. Please contact apple for more information.
    When i take the sim out, i am able to use the iphone in terms of going onto apps and only using wifi but it says no service due to no sim being in the phone.
    the carrier on the settings says giffgaff 17.0 which is why i think the phone should be unlocked but is not working
    i have been advised to 'reset network settings' but im scared this might lock the phone back as the phone is unlocked
    what do i do?

    Your iPhone has not been unlocked,the "guy" has hacked it to remove the Carrier lock and in doiung so has voided your warranty ,post warranty support and help from Apple or for that matter this Community
    The ONLY way to unlock an iPhone is for the Carrier who holds the lock to process the release and then follow this process
    How to unlock your iPhone for use with another carrier - Apple Support
    any other attempt involves jailbreaking the iPhone
    It seems in your case the hack failed .........................and has screwed your iPhone .

  • My iphone 4S shows up on my computer but does not show up in itunes devices. I have all security

    I just got an iPhone 4S and am unable to get it to show up as a device in iTunes.
    I previously backed up my old iPhone on my Windows 7 PC. When I connect my 4S to the PC it is recognized by the PC but does not show up as a device in iTunes.
    I have turned off all virus protection software & have tried uninstalling iTunes and all associated Apple software. I reinstalled all Apple software with no results in my 4S showing up as a device in iTunes.
    Any help is greatly appreciated.

    Try restarting the AMDS >  iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • My iphone4 recently stopped working in my car and no longer asks for audio sources.  It is paired and turns off the radio when a call occurs but does not utilize the speakers or mic in the car.

    My iPhone recently stopped asking for audio source in car and no longer works through the speakers.  It pairs with the vehicles just fine, turns off music, but I must use the actual phone to communicate.  What happened?

    The same problem I have today afternoon.
    My car audio system is compatible with iPod USB connector and worked fine for also 6 months.
    When connecting my iPod nano 6rd gen via USB to car audio system, iPod displays on its screen a sucessfull connection, and music tracks is successfully displayed on the car audio system. But do not play. Switch forward or backward by playlist (by the buttons on the car audio system) works also, but still there is no start playback.
    I tried plugged my iPhone 5 via USB to car audio system - it's works fine.
    I plugged iPod to my mac computer - itunes says it's all Ok.
    I am confused and do not understand what is happening.
    May be restoring to default factory settings iPod....

  • Need help removing malware dfrgsnapnt.exe Have found solutions on the internet, but do not know if they can be trusted.

    My PC recently started booting up & web surfing very slowly, causing me to suspect a virus. I discovered this file on my computer (dfrgsnapnt.exe) when running Microsoft troubleshooting, but haven't located it on my C: drive yet. Did a quick internet search & learned that it is malware. There are fixes and free software downloads on the web, but I don't know which ones are safe!

    I downloaded & ran Malwarebytes and it found & quarantined 3 suspicious items. I did the same for Super Antispyware & ran a complete scan afterwards w/that, but nothing was found, so hopefully I am in the clear. My system seems to be running faster, but I have not yet shut down & rebooted, partly out of fear. I originally discovered the file when running Microsoft troubleshooting & it came up as an item running on Startup, so I originally unchecked it so it would not run (before I reached out to Mozilla for help), but now I don't know where to look for it to be sure it is gone? Or should I just trust that the software got it? Thanks

  • HT5661 i have an iphone 3gs that i want to sell but can not remember my restriction code to reset my phone

    i have an iphone 3gs that i want to sell but cant remember the restriction code to reset my phone

    Connect to iTunes & hit the restore button on the Summary Pane. This will restore as a new device. Eject when finished.

  • I have 2 iphones that share the same apple id but do not want them to share contacts and apps, how can I change this

    I have 2 iphones that share the same apple ID I do not want them to share contacts and apps how can I change this?

    You can use separate AppleIDs for iCloud, iMessage and iTunes - you just need to create unique AppleIDs for the iCloud accounts if syncing contacts that way (you will need an email address that is not already registered as an AppleID though to get another AppleID).
    Apps are a different matter in that purchases are tied to the AppleID used to log in to the store to make the purchase.  So you can create another AppleID for iTunes as well and use different ones on the different phones, but any apps you have already purchased with your existing AppleID are permanently tied to that AppleID.
    Really, unless you are sharing apps, content and such, there is no reason to use the same AppleID on each anyway.  So the simplest solution is to create new AppleID(s) for the second device.  If you need an email address to do that, just get a gmail account (or hotmail, yahoo or any other free email account).

  • TS1363 my iphone 4 shows up in computer folder but will not connect to itunes

    I have unintalled and reinstalled itunes, updated iphone 4 and it still comes up in my computer folder but will not connect to itunes itself says there is an error to connecting help please!

    Hey there Jachin W.,
    It sounds like you are unable to connect to your home Wi-Fi suddenly on 2 different iOS devices. I would be interested to know if the affected phones are able to connect to a different Wi-Fi connection, but barring that I would use the following article to help troubleshoot the devices and the Wi-Fi connection:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    And this section from toward the bottom if needed:
    Unable to connect to a Wi-Fi network
    Verify that you're attempting to connect to your desired Wi-Fi network.
    Make sure you're entering your Wi-Fi password correctly. Passwords may be case sensitive and may contain numbers or special characters.
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
    previously connected Wi-Fi networks and passwords
    recently used Bluetooth accessories
    VPN and APN settings
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

Maybe you are looking for