IPhone contacts: file transfer to Windows 7 via USB-cable  My iPhone can communicate with the computer only via USB-cable (no mobile data, no bluetooth, no internet, no outlook). As I want to get the phone to the "doctor" I want to save specifically

iPhone contacts: file transfer to Windows 7 via USB-cable
My iPhone can communicate with the computer only via USB-cable (no mobile data, no bluetooth, no internet, no outlook). As I want to get the phone to the "doctor" I want to save specifically my contact data and calendar details on the computer (OS: Windows 7). How can I solve this task? I will appreciate your valuable information, thanks.

Using the iPhone, the USB cable, iTunes and Windows Contacts, sync the iPhone contacts to Windows Contacts. That will save them there. They are also included in the iPhone backup made in iTunes, and if you use iCloud.
I'm sorry, I missed the calendar part the first time I looked. For calendar, you need a supported application on the computer (Outlook) or if you use iCloud, you can use the iCloud contacts and calendar app to sync.

Similar Messages

  • I am using Microsoft office 2011 for mac, publisher is not included, meanwhile I have publisher files saved from windows, is there any recommended software I can install on the mac so that I can open the files?

    How can I be able to use my Windows publisher files on my Mac computer, since Microsoft office 2011 for Mac doesn't have Publisher? What's most recommended software to use for this purpose?

    Just an FYI here Allan, and clinton.
    Version 4.0 or newer of Libre Office can open and edit Publisher files, this is fairly new, you may not have noticed it yet,
    I tested it last week for another OP, it works very well, so finally there is a Mac application that can replace Publisher.
    Here's a link to the post.
    VikingOSX deserves the credit for finding it.

  • Leopard Upgrade and Loss of File Transfer to Windows PC

    Loss of File Transfer to Windows PC - I successfully upgraded my MacBook to Leopard with the following exception where I was previously able to transfer files to a Windows PC. I can still connect to the PC but unable to see the folders in "finder" or move files over to it. I can still do this however from my other Mac (iMac) which is still on Tiger. What would the upgrade have done to prevent file transfer being done?
    Thanks Neil

    I had similar problems with browsing Windows shares... Initially I performed an Upgrade installation of Leopard. A temporary work-around was to use the IP address of the Windows computer.
    For example (in the Connect To Server dialog) use:
    smb://<IP address>/sharename
    Obviously, you'll have to determine the local network IP for your Windows computer and know the name of the share. You can do this by opening up a CMD window and issuing the following command at the prompt:
    ipconfig/all
    Hope that wasn't too "technical".
    Note: What fixed the whole problem for me was to perform a clean installation of Leopard... Now all the Windows computers on the network appear under Shared in the Finder sidebar.

  • Communicate with the camera application using dde

    Hi,
    I´m trying to develop an application that can communicate with the camera application in my PDA (Qtek 2020).
    In order to communicate with the camera application, I want to use the DDE mechanism.
    I would like to know if it is possible to use the DDE VIs in LabVIEW 7.1 PDA Module.
    And also, if anyone has already tried to develop some similar application and knows where
    can I get information about the communication protocol, so that i can send the correct messages to the camera application.
    Thanks for any help,
    Pedro

    Is this camera application and your LabVIEW application running on the
    client PC or the PDA? If one of them is running on the PDA I'm pretty
    sure it won't work. DDE is an old legacy technology and most probably
    not supported in Windows PDA OS. And if both applications are not on
    the same device it gets even more complicated as then you really would
    need NetDDE which always was a hassle to setup and there is probably no
    chance that Windows PDA OS would support that.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • Communicate with the soft keyboard on iPad

    Hi guys, I'm using Air 2.7 CPU mode... I've got some code that calls a contact form within a movieclip to the stage on my iPad app... works really nicely and I've also got a button on screen that then removes the contact form from the stage.
    Unforunately if you're in the middle of typing in a field and press the close form button, the ipad soft keyboard stays on screen and so does the text that's been typed.
    I'm wondering if I can communicate with the ipad keyboard to make it go down. I'm hoping I can somehow communicate via actionscript with the small button in the right hand corner of the ipad keyboard which makes the keyboard leave the screen.
    Thanks, Mike

    Does anyone know if you can target the second keyboard screenon the ipad?
    For instance, I was playing around with a Maths learning game, where the user would input numbers only into
    an input box.
    When they click on the input field it would be great if it went straight to the keyboard numbers tab, to make it seamless.
    Thanks,
    Matt

  • I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone,

    I can't get my Windows 7 pc to recognise my old LG VN251 phone via USB.   The verison software upgrade assistant runs and my phone is up to date.   I do get a window that pops up that says I can either run the bootstrap or look at the files on the phone, but I cannot see any photos.   Thoughts?

    We want to make sure we move your pictures to your computer schpee! Do you have a memory card on your phone? If your pictures are not on your http://vz.to/1OvJVey memory card we would want to move them. After you move them than try http://www.verizonwireless.com/support/knowledge-base-45147/ to move them to your computer. Keep us posted.   AmberF_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • HT5163 I turned my iphone off when visiting the doctor's surgery and now it won't turn back on.  It had 73% battery left and I have tried connecting it to my computer with USB but nothing happens.  I have taken out and replaced the sim card too.  Any sugg

    I turned my iphone off when visiting the doctor's surgery and now it won't turn back on.  It had 73% battery left and I have tried connecting it to my computer with USB but nothing happens.  I have taken out and replaced the sim card too.  Any suggestions

    If wjosten's tip doesn't work try plugging it into a USB charger (not through your computer), wait about 30 seconds and it should come on. If it doesn't remove the cord from the phone and keep trying this. I've had this same issue and found a combination of the reset & charging cable tends to work. Sometimes it takes about 5 minutes for the phone to respond.
    Best of luck.

  • I have signed to up to iCloud and am pretty sure that all of my settings are turned on appropriately. However I get syncing from iCloud to my Mac and to my iPhone, but I am unable to get my iPhone to sync with the iCloud and most obviously calendar events

    I have signed to up to iCloud and am pretty sure that all of my settings are turned on appropriately. However I get syncing from iCloud to my iMac and to my iPhone, but I am unable to get my iPhone to sync with the iCloud and most obviously calendar events, so that if adding an event on my iPone it never appears on my other hardware? Can anyone help me sort this out?

    Re: check that the appointments in my phone are going into iCloud calendars....exactly how do I do this?  I fear this is a really stupid question!
    My iCloud account is set up with my Apple ID as one email account (for example [email protected]) which is the email account I use to sign up for internet sites like Amazon, Apple,etc, so that I can differentiate vendors/mass emails.  But my default calendar on my iPhone is in a different email name (ie [email protected]) which I use for most communications to friends, relatives, etc. and it is this account that holds most of my appointments.  To further complicate things I have other email accounts that I use for business/professional and community work.  If I want all my calendars to show on my iPhone AND sync to my iCloud, do I set this at the phone level or the iCloud level?  or both?   
    Let me clarify....It looks like if I go into appointments that I previously set up through my personal account (ie above [email protected]) and edit the entry on my iPhone, selecting the iCloud "home" calendar within the entry, it will then sync to my iCloud account, no problem....do I have to do this to EVERY entry I have? or is there  a way to name my personal account as one to sync to iCloud?

  • Is it possible to sync an iPhone 4 calendar with the Windows 8 calendar?

    My son recently upgraded his computer to the new Alienware 14, running Windows 8.  He begins college next week and he would like to be able to sync his iPhone 4 calendar with the Windows 8 calendar.  Unfortunately, Microsoft no longer supports syncing calendars via Goggle.
    Is it possible to synce between the two devices or does anyone know of an alternative solution?
    Thanks,
    David
    Bristow, VA

    You can do either one.
    You can have seperate iTunes media folders or libraries under the same computer login account. This will require logging in and out of each iTunes library before each device is synced. Eliminates being able to sync each device with iTunes via wi-fi without having to log in and out of each iTunes library before doing so.

  • My iPhone 5 pairs with my automobile except it does not allow me to "pickup" calls using the car facility.  I've contacted Acura RDX 2013 about this problem.  It referred me Apple for a fix. My iPhone 4 worked with the car technology.

    My iPhone 5 pairs with my automobile except it does not allow me to "pickup" calls using the car facility.  I've contacted Acura RDX 2013 about this problem.  It referred me Apple for a fix. My iPhone 4 worked with the car technology.  Is there a fix for the iPhone 5 to allow call pickup via the Acura?
    Thanks

    HI Friend,
    Probably the problem it is because your iPhone 4 and your car have the same Bluetooth technology ( 2.1 ), but iPhone 5 has new Bluetooth technology ( 4.0 ).
    http://www.apple.com/iphone/compare-iphones/

  • I have two iphone 4's with the same name on one computer.  Can I change the name of one so that I can sync each phone separately

    I have two iphone 4's with the same name on one computer.  Can I change the name of one so that I can sync contacts separately?

    How to rename your device in iTunes

  • How do i get my iphone to sync with the itunes on my device?

    how do i get my iphone to sync with the itunes on my device?

    Try viewing this article:  http://support.apple.com/kb/ht1386

  • A lost my remote control for apple tv. I want to use my phone as a remote but the applications can' pair with the Apple TV device , how can I pair them without remote?

    A lost my remote control for apple tv. I want to use my phone as a remote but the applications can' pair with the Apple TV device , how can I pair them without remote?

    Setup for remote app: http://support.apple.com/kb/ht1947
    Specifically:
    Set up Apple TV (2nd and 3rd generation)
    On Apple TV, select Settings from the main menu.
    Select General > Remotes > Remote App. If Home Sharing isn't set up on your Apple TV, you should turn it on.
    Apple TV (2nd and 3rd generation) uses Home Sharing to stream content from your iTunes library on your computer to your HDTV.  If  you connect your Apple TV to your iTunes library using  Home  Sharing, you can use Remote to browse and play content from any  iTunes library in the Computers   section of your Apple TV. You can also  use Remote to select  between available speakers to enhance  your  audio and video experience.

  • HT1414 Hello, do you know what I can do when my Iphone is blocked with the apple appearing ? I cannot enter into the phone and I don't know what to do ? Thank you

    Hello,
    Do you know what I can do when my Iphone is blocked with the apple appearing ?
    I cannot enter into the phone and I don't know what to do ?
    Thank you for your help
    AMGSO

    Basics from the manual are restart,  reset, and restore.
    Have you tried these?

  • I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated

    I am running windows 7 64bit, have a brother printer MFC-J4510W with the latest driver update, have Adobe reader 11.0.10.32 and as of today I cannot print any pdf files that before I could, all help appreciated
    I followed the FAQ troubleshooting and that didn't help

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Maybe you are looking for