Iphone doing some strange things!

I'll start from the beginning, I woke up this morning and my Iphone 4 wouldn't find a signal until I turned it off and on.
Skip forward an hour and I check it, it was saying (something along the lines of) 'Repair needed: Iphone cannot make or receive calls' so I turned it off and on again and that disappeared but now appeared 'Iphone needs to be restored' and it was on the emergency screen!
I plugged it into iTunes to restore it but it asked me for a lock code (which I had no way of typing in on the iPhone because it was stuck on the emergency screen! catch 22 or what..)
A quick google told me to put it into recovery mode and do a restore that way, which was all well and good until the end of the restore which popped up 'Error 1013'
I've tried this on my mac and my dads windows laptop and both give the same error.
Will I need to go to the apple store or is there anything I can do? I really don't want to have to make the trek to town unnecessarily (also I'm dying here without a phone! haha)
Can anyone offer some help?

A little long but this thread might help with the 1013 error... http://discussions.apple.com/thread.jspa?messageID=12632690&#12632690

Similar Messages

  • I want to reinstall CS4 as it has been doing some strange things regarding printing, etc. However, when I did this before, it created a major problem and I ended up buying a new computer because no one could figure out why it kept hanging up during the in

    I want to reinstall CS4 as it has been doing some strange things regarding printing, etc. However, when I did this before, it created a major problem and I ended up buying a new computer because no one could figure out why it kept hanging up during the installation. Hours on the phone, no results. I'm scared to do it on this computer. Should I try? Not even the Adobe support could get it resolved. I believe it was somehow reading a product number that could not be deleted or something, and nothing worked.
    Message was edited by: Doug Doug

    Hello, as an addition:
    In your case I would download a really new trial version of your program(s) in question and change it/them into a "real" version later, BUT because you said, that you "re-installed" already, so it will become a little bit more complicated. It would be necessary that you have to use "Adobe Creative Suite Cleaner Tool" as Keith wrote.
    Here an advice for that (The order varies depending on your individual needs. Please read all my proposals first, so you can better choose the first step:)
    1. Maybe you have to activate/deactivate, so please have a look there:
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    2. Sometimes, we know in the meantime, the "opm.db file" is the culprit. In this case you should delete it.
    3. Be careful with (de)installing aso. by (de)installing by your own resources. As much as I regret it and as strange as it may seem I fear it's a challenge for Adobe's Creative Cloud Cleaner Tool. Sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!)
    I quote: Adobe Creative Suite Cleaner Tool helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3-CS6) applications. The tool removes installation records for prerelease installations of Creative Cloud or Creative Suite applications. It does not affect existing installations of previous versions of Creative Cloud or Creative Suite applications.
    Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html   and follow the prescribed sequence of operations
    4. If necessary and for further questions click through http://helpx.adobe.com/contact.html and if "open" please use the chat, I for may part - as it seems unlike you - had the best experiences. I quote from Adobe's employee Preran: The chat button is activated as soon as there is an agent available to help.
    Hans-Günter

  • My iPad is doing some strange things. Any suggestions???

    Hi everyone
    Thanks for taking time to read this. My iPad is doing some odd things and I think it's been sicne iOS 4.2 update. The problems I'm having are:
    1) I installed The Sun newspaper app a few months back and it's been workng fine but recently it's having problems loading saying it cannot contact the server and to try later. My ISP says nothing is blocked their side. The Sun say everything is fine their side. I've updated my router but still no good. Now and again and with no pattern it will all of a sudden work. Interestingly thought, it works fine with my 3 MiFi dongle. The News Of The World App does the same thign, yet The Times and Financial Times apps work fine.
    2) When surfing on Safari it will now and again say there was a problem displaying the page. I refresh a few times and it will load. When it's saying it can't display the page I have jumped on my Windows 7 laptop and accessed the page fine.
    I have done a restore from back up and also a restore and setup as a new device. I've uninstalled/reinstalled the problem apps but to no avail.
    Anyone got any suggestions?
    Thanks again in advance.

    Hi,
    1. Try resetting network settings. Tap Settings / General / Reset / Reset Network Settings.
    2. For Safari. Tap Settings / Safari. Clear the history, cookies, and cache.
    Restart your iPad. Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.
    See if you notice an improvement. If not, try syncing but omit the Sun app.
    And try contacting the Sun app developer support.
    http://www.thesun.co.uk/sol/homepage/components/3061158/Appy-Days.html
    Carolyn

  • I traded my iphone in and now have a new one (iPhone 5) with the same SIM.  Since, I have had some iMessages meant for someone else and some strange things happening on my phone (applications opening by themselves, calls disappearing from log). Any ideas?

    I traded my iphone in and now have a new one (iPhone 5) with the same SIM.  Since, I have had some iMessages meant for someone else and some strange things happening on my phone (applications opening by themselves, calls disappearing from log). Any ideas?

    The answer is very simple: You were not the original owner of the phone. Target sold you a phone that had been returned. You can verify the date of the original sale here: Apple - Support - Check Your Service and Support Coverage. I suspect you will find that the warranty expiration date is not one year from the date that you bought it.

  • 2 bugs.. and some strange things..

    Hi, i use my new iphone 5 since a weekswith  iOS 6.1.4, and so far i found to bugs, first bug, i'am most of the time on Airplane mode (for my convenience..) if someone let me a voicemail and after i  listen it when i go back to Airplane mode i have a red icon just like i have a new Voicemail un listened, i get out of airplane mode and no more voicemail, i can do that many time alway red icon on airplane mode and in fact no new voicemail when not in airplane mode..
      Ieven try to delete the voicemail i have listen but i still have this red icon on voicemail and i go on airplane mode.. only 2 solutions for now, go on deleted voicemail and delete them from recycle bin, or a Real iPhone reboot (press 10 sec on start button...) i never had this problem on older iOS version on my iPhone 4..
    Second bug, i get sometime since 2 weeks i have a almost black screen, then i go on general > brightness and wallpapper and i see that brightness become set to almost 0, so i move the cursor to around 80 %, next day again same thing, so i uncheck auto adjustment and now it work, auto adjustment is cool and alway worked fine on my old version iOS on iphone 4, if you can fix that..
    Also as i talk to you (hope you read ;-) some impression, i prefer by Far the old Keypadto make a dial compare to new one who look B@d to me...
    each time i get our of airplane mode i have for 2 sec (no network, then he find, before he searched and then say no network if it's true, in fact i have more bad network and safari won't find any connection with my new iphone (same operator (SFR)
    I feel the battery of my iphne 5 get used more fast then the one on my iphone 4....,
    Thank's
    Stephane

    / isnt full, there is like 4gb free space...
    and i made a mistake, /sbin/shutdown was there, but when i typed "shutdown -h now" it says that "shutdown" is an unknown command. (i just had that error again!). root uses bash as default shell... it didnt work in tty, it didnt work in urxvt, this time i typed /sbin/shutdown -h now and that worked... but its still not like it should be. And it doesnt explain the random corruption of packages...
    EDIT:
    Same problem with any other files out of /sbin...  the strange thing is, in /etc/profile, $PATH looks like this:
    /bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/opt/bin:/home/jan/bin:/usr/local/bin
    but echo $PATH gives me:
    ./:/bin:/usr/bin:/usr/local/bin:/usr/bin
    Last edited by mienensuchkind (2008-03-09 15:52:26)

  • Some strange things happened this morning.

    Hi,
    just wanted to ask if anybody expirienced comparable things in the last time:
    Yesterday i hat no /bin/shutdown, so i couldnt shutdown... it was like *gone*. So i killed my PC the hard way. Today i was booting again, and the nvidia module couldn't be loaded for some reason... so i had to remove and reinstall it. Then, my centerim was gone, totally! Reinstalled it - no problems. Whats up with me?

    / isnt full, there is like 4gb free space...
    and i made a mistake, /sbin/shutdown was there, but when i typed "shutdown -h now" it says that "shutdown" is an unknown command. (i just had that error again!). root uses bash as default shell... it didnt work in tty, it didnt work in urxvt, this time i typed /sbin/shutdown -h now and that worked... but its still not like it should be. And it doesnt explain the random corruption of packages...
    EDIT:
    Same problem with any other files out of /sbin...  the strange thing is, in /etc/profile, $PATH looks like this:
    /bin:/usr/bin:/sbin:/usr/sbin:/usr/X11R6/bin:/opt/bin:/home/jan/bin:/usr/local/bin
    but echo $PATH gives me:
    ./:/bin:/usr/bin:/usr/local/bin:/usr/bin
    Last edited by mienensuchkind (2008-03-09 15:52:26)

  • Some strange things!??

    I have a Brand New Mac Book Pro 17" And I use Netscape but for some weird reason I get this ? mark with the quick timelogo behind it yet I have all the plug ins and it worked very well on my old Powerbook 17" Nobody can seem to help me. Anyone have this issue? I like Safari but it just a little bit of a pain to transfer all my password etc over yet. Also take a long time to fire up some programs................. I miis my old G4 Powerbook

    Hi Rubber Pants,
    Now I'm confused. I thought you could not play your
    videos. We told you Netscape is not a universal
    binary. Now you say you can play your videos using
    Safari, but Safari is acting up on your MBP? Try
    deleting the plist file. By doing this you will lose
    your settings, but not your bookmarks.
    User-Library-Preferences-com.apple.Safari.plist
    Also give both Firefiox and Camino a try.....
    http://macupdate.com/info.php/id/7548
    http://www.macupdate.com/info.php/id/10700
    Both are universal binary.
    Thanks......... the problem is not Safari but Netscape, as I said I really need to use this browser as I have too many saved users/passwords in it. Also I find I like it. I hope they come out with a new one soon for this new platform. Thanks

  • IPhone doing its own thing!

    I had to send away my IPhone 4 and get a replacement but the one I have is going crazy! It won't open up apps it won't close them, it won't turn off after a call, it keeps pressing numbers on its own and even opening apps by it self. Any ideas? Why it's doing it? How I can fix it? Thanks

    looks like hardware problem ! Take it back

  • Zen Micro Doing Some Weird THINGS PLEASE H

    well i've had my zen for a long time and enjoyed it for along time till one day the screen goes blank but i could still listen to my music. its way out of warranty and i tryed to upgrade the firmware but my device wasnt recognized bye the update. Napster says its corrupt and needs to be reformatted and i dont know what to do. i took it apart and somone told me i could fiddle with a black little chip to get the screen to come back.my computer recognizes it and i can brows the files on it is there any way i could manually do the firmware update? any suggestions!!!!!! PLEASE HELP I BEG OF YOU IM DIEING WITHOUT IT
    thanks
    -Cameron~!Message Edited by cameron200 on 05-09-20070:38 PM

    I (and many other people who own Creative products) had the same display issue that you are experiencing. I own a Creative Zen Micro. When I turned it on, the back blue light came on, but the screen was completely blank!? I could play my music, but could not see the menu, etc.
    I first tried to do the reboot process, then I also upgraded the firmware. Nothing worked. After writing to Creative Labs tech support, they informed me that my MP3 player was one month beyond the warranty period. It would cost $85-$35 for tech support to fix the display problem. Ridiculous!? My techie friend told me that since it was already out of warranty, it would not hurt for me to pop open the back and see if maybe the connector from the main board to the display was loose. Well, I got even luckier than that. I openned the back, removed the battery, then I moved the back plate around trying to figure out how to pop it off. Since it was not as easy as my friend had said, I put everything back together to take it to him for help. I?turned the MP3 player on to make sure it still worked and the display was fixed!? I am thinking there must have been something loose or I just got really lucky. Anyway, it has been over 6 months and the display still works. Who knows, try what I did and maybe the same thing will happen to you. I feel for you. It is so frustrating when you spend money on something that breaks and find out it is a known issue. Good luck.

  • FCPX may be doing some weird things to my iphoto library

    A few months ago I installed FCPX and since then my iphoto seems to swallow chunks of pics and store them in other places, ex. my external hard drive w/o my consent. Is this related to FCPX or strictly an Iphoto problem?

    I (and many other people who own Creative products) had the same display issue that you are experiencing. I own a Creative Zen Micro. When I turned it on, the back blue light came on, but the screen was completely blank!? I could play my music, but could not see the menu, etc.
    I first tried to do the reboot process, then I also upgraded the firmware. Nothing worked. After writing to Creative Labs tech support, they informed me that my MP3 player was one month beyond the warranty period. It would cost $85-$35 for tech support to fix the display problem. Ridiculous!? My techie friend told me that since it was already out of warranty, it would not hurt for me to pop open the back and see if maybe the connector from the main board to the display was loose. Well, I got even luckier than that. I openned the back, removed the battery, then I moved the back plate around trying to figure out how to pop it off. Since it was not as easy as my friend had said, I put everything back together to take it to him for help. I?turned the MP3 player on to make sure it still worked and the display was fixed!? I am thinking there must have been something loose or I just got really lucky. Anyway, it has been over 6 months and the display still works. Who knows, try what I did and maybe the same thing will happen to you. I feel for you. It is so frustrating when you spend money on something that breaks and find out it is a known issue. Good luck.

  • My PowerMac G5 started doing strange things today

    My G5 started doing some strange things this afternoon. i thought it was a sofware problem with one of my programs and decided to reboot. When i tried to restart the system it started to reboot, but then stopped. i tried several times with differing results. One time i got the white start-up scrdeen, but got no further. Another time i got the chime, but nothing else. i then noticed a liquid seeping from the bottom of the case. This doesn't appear to be water as it has a very slightly "oily" consistency. i have definitely not spilt anything anywhere near the G5. Very odd. Anyone know what is going on and can it be fixed?

    Thank you both for your valued input. My machine is the Dual 2.7 GHz PowerPC G5. I suspect that you have given me my answer as it is still leaking, although I do now have it up and running, for the time being! I hadn't realised that mine effectively had an in-built airconditioner, that could and would likely go wrong!
    I have been planning to replace my G5 for some time now and I guess that I will now have to bite the mighty bullet. In many ways this is long overdue, given all the PowerPC / Intel issues that I have with up-grading much of the software I require as a photographer.
    In the meantime I am ensuring that my backups are up to date, whilst it still has some life. I am also creating a full backup of my applications disk so that I can transfer stuff to a new machine without having to reload/ rundown some of my more esoteric apps. Luckily all my data is backed up twice daily.
    One further question if I may, do the current twelve core Mac Pro's use this type of cooling system?

  • I mac doing strange things

    imac, 20", running 10.5.8 Using any mouse (not mouse specific)
    There have been some strange things happening to the imac lately.
    Some examples:
    -in any browser (camino, safari) in Google maps for instance, placing the mouse curser in a map window, it'll zoom right down to the closest level. When I try zooming out, it zipps right back in.
    -in Aperture, while viewing a full screen photo and (using the keyboard) hitting the next arrow, it'll flay though ALL the photos instead of just the next one.
    -in Garage band, when trying to move (drag) a track in the timeline, it shoots back to wherever it wants to.
    -in Simms 2, the pointer disappears, menu bar flashes on and off, and the main view window spins (looking at sky, ground, up, down left right) all on it's own.
    This issue doesn't seem to be application specific, and I've tried different mice. I've run disk repair (and permissions etc) and run FSCK. will shut down and/or restart and the problem may be gone for a few hours, but keeps coming back. The imac is backed up with time machine.
    Any suggestions?
    Should I erase the drive and restore from Time Machine?
    (I've resisted going to Snow Leopard because I'm not sure Simms2 works with it)

    I would try resetting your computer's PRAM and running a Safe Boot. To do so, boot your machine with the Shift key held down. See this support document for more information.
    Since you're running 10.5, download and run the 10.5.8 Combo Updater. It will re-apply any system patches needed, and may fix whatever is going in with your zooming issues.

  • Lion and Mavericks (strange things going on)

    Hello everybody,
    I have a 2010 (white) macbook,
    I just installed Mavericks and updated it to 10.9.3. The macbook runs both 10.7 Lion (my main and most important partition) and 10.9, it's a dual boot.
    My partition with Lion is called ''Macintosh HD'' and the one with Mavericks is called ''OS X Mavericks''. (Mavericks is startup partition)
    Now i'm using both together some strange things are happening. First off when i opened Finder in Mavericks it only showed ''Macintosh HD'' like that was the partition Mavericks was installed on, now i've added the right partition in the sidebar of the finder (OS X Mavericks). This was already weird.
    When i went back into Lion everything was fine but it stated indexing ( i guess the mavericks partition ) this annoyed me because i want them to be seperate.
    So I went to settings > Spotlight > Privacy and added ''OS X Mavericks'' so Lion stopped indexing that part of my harddrive.
    When I went into Mavericks again, the spotlight on Mavericks was indexing and then randomly stopped. I went in to Setting > Spotlight and Privacy again.
    Only now in Mavericks. Guess what: in privacy ''OS X Mavericks'' partition was added.
    Is Mavericks reading from the wrong partition??
    Is spotlight running between two OS X versions?
    How can i make sure Mavericks is reading info from the right partition?
    It would be very nice if someone could tell me more about this..
    Thanks in advance !!

    I remember when Lion first came out, I installed a second Lion partiton and had issues similar to this. The MAS failed to work at all in the new Lion partition until I removed the original.
    I suspect there is something with Lion that only likes one OS X per drive.
    You might need to install Mavericks on an external drive rather than the second partition.

  • Strange thing happens when smplayer use xv-intel video overlay

    i started to notice some strange thing happens when i turn on the desktop composting effect on kde,smplayer's video  show blue colors,and smplayer menu has a thick blue line surrounding it.
    whatever other windows i dragged over the smplayer show the same effect,which is very annoying. i figured it's something with the video output.
    the default video output is xv-intel video overlay,so i changed it to xv,gl,etc,and things become normal,xv-intel textured video works fine,too.
    of course if i turn off the compositing effect,everything will be ok.
    so it's because there are conflicts between the desktop effects and the xv-intel video overlay output?

    [21:29:58:630] Paths::configPath: XDG_CONFIG_HOME: /home/merlin/.config
    [21:29:58:630] main: lock_file: /home/merlin/.config/smplayer/smplayer_init.lock
    [21:29:58:640] Paths::configPath: XDG_CONFIG_HOME: /home/merlin/.config
    [21:29:58:640] global_init
    [21:29:58:640] Paths::configPath: XDG_CONFIG_HOME: /home/merlin/.config
    [21:29:58:640] Paths::configPath: XDG_CONFIG_HOME: /home/merlin/.config
    [21:29:58:658] global_init: config file: '/home/merlin/.config/smplayer/smplayer.ini'
    [21:29:58:667] Paths::configPath: XDG_CONFIG_HOME: /home/merlin/.config
    [21:29:58:674] Paths::configPath: XDG_CONFIG_HOME: /home/merlin/.config
    [21:29:58:674] Preferences::load
    [21:29:58:675] AssStyles::load
    [21:29:58:685] Translator::loadCatalog: can't load qt_zh_CN from /usr/share/smplayer/translations
    [21:29:58:717] Translator::loadCatalog: successfully loaded qt_zh_CN from /usr/share/qt/translations
    [21:29:58:735] Translator::loadCatalog: successfully loaded smplayer_zh_CN from /usr/share/smplayer/translations
    [21:29:58:738] 这是运行在 Linux 上的 SMPlayer v. 0.6.8 (SVN r3213)
    [21:29:58:738] Compiled with Qt v. 4.5.2, using 4.5.2
    [21:29:58:738]  * application path: '/usr/bin'
    [21:29:58:738]  * data path: '/usr/share/smplayer'
    [21:29:58:738]  * translation path: '/usr/share/smplayer/translations'
    [21:29:58:738]  * doc path: '/usr/share/doc/packages/smplayer'
    [21:29:58:738]  * themes path: '/usr/share/smplayer/themes'
    [21:29:58:738]  * shortcuts path: '/usr/share/smplayer/shortcuts'
    [21:29:58:738] Paths::configPath: XDG_CONFIG_HOME: /home/merlin/.config
    [21:29:58:738]  * config path: '/home/merlin/.config/smplayer'
    [21:29:58:738] Paths::configPath: XDG_CONFIG_HOME: /home/merlin/.config
    [21:29:58:738]  * ini path: '/home/merlin/.config/smplayer'
    [21:29:58:738] Paths::configPath: XDG_CONFIG_HOME: /home/merlin/.config
    [21:29:58:738]  * file for subtitles' styles: '/home/merlin/.config/smplayer/styles.ass'
    [21:29:58:738]  * current path: '/home/merlin'
    [21:29:58:738] SMPlayer::processArgs: arguments: 1
    [21:29:58:738] SMPlayer::processArgs: 0 = /usr/bin/smplayer
    [21:29:58:739] SMPlayer::processArgs: files_to_play: count: 0
    [21:29:58:753] MyClient::MyClient
    [21:29:58:753] SMPlayer::processArgs: trying to connect to port 33181
    [21:29:58:754] SMPlayer::gui: changed working directory to app path
    [21:29:58:754] SMPlayer::gui: current directory: /usr/bin
    [21:29:58:770] Screen::setAutoHideCursor: 0
    [21:29:58:770] Screen::setAutoHideCursor: 0
    [21:29:58:799] Core::changeFileSettingsMethod: hash
    [21:29:58:799] Paths::configPath: XDG_CONFIG_HOME: /home/merlin/.config
    [21:29:58:799] Paths::configPath: XDG_CONFIG_HOME: /home/merlin/.config
    [21:29:58:799] MplayerLayer::setRepaintBackground: 0
    [21:29:58:799] Preferences::monitor_aspect_double
    [21:29:58:799]  warning: monitor_aspect couldn't be parsed!
    [21:29:58:800]  monitor_aspect set to 0
    [21:29:58:886] Playlist::setModified: 0
    [21:29:58:902] Playlist::loadSettings
    [21:29:58:902] Playlist::addItem: '/home/merlin/mnt/usb3/夏娃的诱惑-天使/夏娃的诱惑-天使.rmvb'
    [21:29:58:902] Playlist::setModified: 0
    [21:29:58:902] Playlist::updateView
    [21:29:58:954] Playlist::updateView: name: 'BT޼-www.btwuji.com'
    [21:29:59:008] Style name: 'oxygen'
    [21:29:59:008] Style class name: 'OxygenStyle'
    [21:29:59:022] Paths::configPath: XDG_CONFIG_HOME: /home/merlin/.config
    [21:29:59:022] Favorites::load
    [21:29:59:023] TVList::parse_channels_conf
    [21:29:59:030] VList::parse_channels_conf: /home/merlin/.mplayer/channels.conf.ter doesn't exist
    [21:29:59:030] TVList::parse_channels_conf: can't open /home/merlin/.mplayer/channels.conf
    [21:29:59:031] Paths::configPath: XDG_CONFIG_HOME: /home/merlin/.config
    [21:29:59:031] Favorites::load
    [21:29:59:031] TVList::parse_channels_conf
    [21:29:59:031] VList::parse_channels_conf: /home/merlin/.mplayer/channels.conf.ter doesn't exist
    [21:29:59:031] TVList::parse_channels_conf: can't open /home/merlin/.mplayer/channels.conf
    [21:29:59:035] BaseGui::initializeMenus
    [21:29:59:155] BaseGui::initializeMenus
    [21:29:59:156] BaseGui::updateRecents
    [21:29:59:156] BaseGui::updateWidgets
    [21:29:59:168] Core::changeUseAss: 1
    [21:29:59:168] Core::changeSubVisilibity: 1
    [21:29:59:168] Core::tellmp: 'sub_visibility 1'
    [21:29:59:168] WARNING:  tellmp: no process running: sub_visibility 1
    [21:29:59:168] Core::displayMessage
    [21:29:59:168] BaseGui::setStayOnTop: 0
    [21:29:59:168] BaseGui::setStayOnTop: nothing to do
    [21:29:59:168] BaseGui::updateWidgets
    [21:29:59:168] BaseGui::updateWidgets
    [21:29:59:169] BaseGui::updateRecents
    [21:29:59:169] Preferences::save
    [21:29:59:169] AssStyles::save
    [21:29:59:173] BaseGui::initializeGui: server running on port 37779
    [21:29:59:280] BaseGui::initializeMenus
    [21:29:59:281] BaseGui::updateRecents
    [21:29:59:281] BaseGui::updateWidgets
    [21:29:59:283] BaseGuiPlus::loadConfig
    [21:29:59:284] DefaultGui::createStatusBar
    [21:29:59:285] DefaultGui::createActions
    [21:29:59:289] DefaultGui::createControlWidget
    [21:29:59:289] DefaultGui::createControlWidgetMini
    [21:29:59:389] BaseGui::initializeMenus
    [21:29:59:390] BaseGui::updateRecents
    [21:29:59:390] DefaultGui::updateWidgets
    [21:29:59:390] BaseGui::updateWidgets
    [21:29:59:397] DefaultGui::loadConfig
    [21:29:59:397] DesktopInfo::isInsideScreen: geometry of screen: x:0 y:0 w:1024 h:768
    [21:29:59:397] ToolbarEditor::load: 'toolbar1'
    [21:29:59:397] ToolbarEditor::load: loading action open_file
    [21:29:59:397] ToolbarEditor::load: loading action open_dvd
    [21:29:59:397] ToolbarEditor::load: loading action open_url
    [21:29:59:398] ToolbarEditor::load: loading action separator
    [21:29:59:398] ToolbarEditor::load: adding separator
    [21:29:59:398] ToolbarEditor::load: loading action compact
    [21:29:59:398] ToolbarEditor::load: loading action fullscreen
    [21:29:59:398] ToolbarEditor::load: loading action separator
    [21:29:59:398] ToolbarEditor::load: adding separator
    [21:29:59:398] ToolbarEditor::load: loading action screenshot
    [21:29:59:398] ToolbarEditor::load: loading action separator
    [21:29:59:398] ToolbarEditor::load: adding separator
    [21:29:59:398] ToolbarEditor::load: loading action show_file_properties
    [21:29:59:398] ToolbarEditor::load: loading action show_playlist
    [21:29:59:398] ToolbarEditor::load: loading action show_preferences
    [21:29:59:398] ToolbarEditor::load: loading action separator
    [21:29:59:399] ToolbarEditor::load: adding separator
    [21:29:59:399] ToolbarEditor::load: loading action play_prev
    [21:29:59:399] ToolbarEditor::load: loading action play_next
    [21:29:59:399] ToolbarEditor::load: 'controlwidget'
    [21:29:59:399] ToolbarEditor::load: loading action play
    [21:29:59:399] ToolbarEditor::load: loading action pause_and_frame_step
    [21:29:59:399] ToolbarEditor::load: loading action stop
    [21:29:59:399] ToolbarEditor::load: loading action separator
    [21:29:59:399] ToolbarEditor::load: adding separator
    [21:29:59:399] ToolbarEditor::load: loading action rewindbutton_action
    [21:29:59:399] ToolbarEditor::load: loading action timeslider_action
    [21:29:59:400] TimeSlider::setDragDelay: 100
    [21:29:59:400] ToolbarEditor::load: loading action forwardbutton_action
    [21:29:59:400] ToolbarEditor::load: loading action separator
    [21:29:59:400] ToolbarEditor::load: adding separator
    [21:29:59:400] ToolbarEditor::load: loading action fullscreen
    [21:29:59:400] ToolbarEditor::load: loading action mute
    [21:29:59:400] ToolbarEditor::load: loading action volumeslider_action
    [21:29:59:400] ToolbarEditor::load: 'controlwidget_mini'
    [21:29:59:400] ToolbarEditor::load: loading action play_or_pause
    [21:29:59:400] ToolbarEditor::load: loading action stop
    [21:29:59:401] ToolbarEditor::load: loading action separator
    [21:29:59:401] ToolbarEditor::load: adding separator
    [21:29:59:401] ToolbarEditor::load: loading action rewind1
    [21:29:59:401] ToolbarEditor::load: loading action timeslider_action
    [21:29:59:401] TimeSlider::setDragDelay: 100
    [21:29:59:401] ToolbarEditor::load: loading action forward1
    [21:29:59:401] ToolbarEditor::load: loading action separator
    [21:29:59:401] ToolbarEditor::load: adding separator
    [21:29:59:401] ToolbarEditor::load: loading action mute
    [21:29:59:401] ToolbarEditor::load: loading action volumeslider_action
    [21:29:59:401] ToolbarEditor::load: ''
    [21:29:59:401] ToolbarEditor::load: loading action play
    [21:29:59:402] ToolbarEditor::load: loading action pause
    [21:29:59:402] ToolbarEditor::load: loading action stop
    [21:29:59:402] ToolbarEditor::load: loading action separator
    [21:29:59:402] ToolbarEditor::load: adding separator
    [21:29:59:402] ToolbarEditor::load: loading action rewindbutton_action
    [21:29:59:402] ToolbarEditor::load: loading action timeslider_action
    [21:29:59:402] TimeSlider::setDragDelay: 100
    [21:29:59:402] ToolbarEditor::load: loading action forwardbutton_action
    [21:29:59:402] ToolbarEditor::load: loading action separator
    [21:29:59:402] ToolbarEditor::load: adding separator
    [21:29:59:402] ToolbarEditor::load: loading action fullscreen
    [21:29:59:402] ToolbarEditor::load: loading action mute
    [21:29:59:403] ToolbarEditor::load: loading action volumeslider_action
    [21:29:59:403] ToolbarEditor::load: loading action separator
    [21:29:59:403] ToolbarEditor::load: adding separator
    [21:29:59:403] ToolbarEditor::load: loading action timelabel_action
    [21:29:59:404] Helper::qtVersion: 4502
    [21:29:59:408] DefaultGui::loadConfig: playlist visible: 0
    [21:29:59:408] DefaultGui::loadConfig: playlist position: 512, 461
    [21:29:59:408] DefaultGui::loadConfig: playlist size: 512 x 307
    [21:29:59:408] DefaultGui::updateWidgets
    [21:29:59:408] BaseGui::updateWidgets
    [21:29:59:413] BaseGui::showEvent
    [21:29:59:413] main: remove_lock: /home/merlin/.config/smplayer/smplayer_init.lock
    [21:29:59:418] BaseGui::loadActions
    [21:29:59:418] ActionsEditor::loadFromConfig
    [21:29:59:763] BaseGui::initializeMenus
    [21:29:59:763] BaseGui::updateRecents
    [21:29:59:763] DefaultGui::updateWidgets
    [21:29:59:763] BaseGui::updateWidgets
    [21:30:06:737] BaseGui::showMplayerLog
    [21:30:19:426] BaseGui::showLog
    [21:32:47:708] BaseGui::showLog
    [21:34:15:081] BaseGui::showLog

  • Help needed because of strange things with Lollipop!

    Hello everyone. I've updated to Lollipop 5.0.2 .... But some strange things are happening.
    I've updated using PC companion. When I finished downloading the update files from the Net
    ,and I've turned off my phone so the update starts. After 1 minute something wrong went with my
    computer. It restarts by itself. So my phone didn't boot anymore. I tried to reupdate it, but
    that couldn't be done cause the phone is not booting. So I had one option, which is to do
    a system repair to repair my phone. I did it and I succeed. So my phone is now updated to lollipop
    , but of course all the data in the phone were wiped out. This is not a problem, I can redownload the apps I want.
    The problem is that on Kitkat I used to play a game called ( plants vs zombies ) , but on Lollipop
    Whenever I open the game it shuts down after half a minute. I thought the problem was
    because I moved it to the SD card, so I moved it to the internal storage of my phone
    but no change. It still shuts down by itself.
    Another thing is that when I install an app, in normal state there are moving lines from the above
    to show that the app is installing . Sometimes those lines disappear , I don't know if this is a problem or not.
    This is a screenshot of the fault.As you can see , the line is still. There must be lines moving inside it.Thanks.

    Hi! Sorry, I've been busy and hadn't gone on the forum for about 2 weeks haha. Uhm I do not experience the problem anymore it was a long time ago, from where do you download your APK files? I used 1MobileMarket for the download of PvZ2 but I receive updates via Google PlayStore. The only thing I can suggest is that you uninstall it, try downloading it vis 1MobileMarket and see if it works. If not I really don't know what the problem is.. I had my problems with PvZ on the Z, not the Z2, but it was the same you are experiencing with the game. I did notice that whenever I did a factory reset or system repair, I'd lose all my PvZ gaming data although I had my Google Play Account logged it to sync my data. As for the lines while installing the app; If the apps work normal after installing (the lines still didn't show up or disappeared) I don't think it might be such a problem. As long as you can run the apps. Hope this helps!

Maybe you are looking for

  • Why am I having bluetooth & wifi issues?

    I just purchased a brand new 2012 Mac Mini i7 last week from Microcenter. I immediately installed 16 GB RAM into it and updated it to Yosemite. My magic mouse has been unbearably laggy every single day, and sometimes it disconnects randomly for no re

  • Outbound IDoc Adapter

    I have a file to IDoc scenario in my production XI box (EXP). This scenario sends the IDoc to my productions ECC box (EP1). In SXMB_MONI in EXP the message status is fail because "Unable to convert the sender service BS_SAPPI700_EXD200 to an ALE logi

  • Upgrade not accepting previous serial number

    I have purchased an upgrade from Creative Suite standard 5.5 to 6. It accepted my serial number for the new upgrade, and asked for the serial number for the 5.5. I entered it, but it won't accept it as valid, even though it is there in my Licensing r

  • Intuos creative stylus

    i cant connect newly bought Wacom intuos creative stylus to my MD524TU/A iPad4 with 7.1.1(11D201). Bluetooth adapters are on on both devices. Indicator is blinking on stylus and iPad is searchinf for devices avalable, but connection cant be set. i ca

  • Time Zone- patch 12?

    Hello experts I got SAP B1 8,8  p12. In a conference with a consultant, he showed his screen and  System Initialization- General Settings, there was a tab called "time zone". We have the same version, same product and I do not get this tab. Do you kn