IPhoto automatically starts up

I just inherited a G5 at work from a co-worker who left. I've created a new user account and log in under it. But for some reason iPhoto automatically starts when I log in.
I've looked under my system account preferences for start-up items, but nothing is selected. I don't see any automatic start-up selections under iPhoto preferences either. How can I prevent iPhoto from starting up every time I log in?
Thanks.

Thanks for the tip about the dock icon, but "open at login" was not checked.
There is a Lacie hard drive that had been attached to my old G4 that is now plugged into this G5. Perhaps that is the culprit.
Is there a way to instruct iPhoto not to launch when it thinks a camera (or other USB device) is connected?
Thanks.

Similar Messages

  • IPhoto automatically starts when macbook starts up

    Hello
    i recently updated iPhoto to 9.5.1 and ever since then, every time i turn on my mac book air ,i photo automatically launches. I've checked the settings and i don't find anything to disable it from automatically starting /opening upon laptop start up.
    does this happen to anyone else? what can i do to stop it from automatically starting??

    Hello!
    Please go to "apple menu > system preferences > users & groups" and remove iPhoto from the login items using the minus-button
    Also, after clicking "apple menu > shut down" make sure the checkbox below in un-checked

  • How can I disable iPhoto from automatically starting when I connect my iPhone?

    Whenever I connect my iPhone to my Mac it automatically starts iPhoto?  How can I make this not happen?

    Go into iPhoto's General preference pane and set the Connecting camera opens to No Application:
    OT

  • Is there a way to synch/charge my iphone 4 with my imac without automatically starting iphoto on my imac?

    Is there a way to synch/charge my iphone 4 with my imac without automatically starting iphoto on my imac?

    SuzanneHasib786 wrote:
    Thank you, i dont think they can do much unless i go to the apple store and they do it there and then.
    Did you try? The Apple store might not be able to do it as they have no access to account security (it is a separate team). I would call the store before making the trip.

  • How to stop iphoto from automatically starting when it detects photos?

    I keep photos on my flash drive but don't want iphoto to start up and want to import them everytime I plug in the flash drive. I can't find the setting anywhere...did I just miss it?
    TIA
    Tim

    It would be best to ask in the iPhoto 6 forum - http://discussions.apple.com/forum.jspa?forumID=1116 - it is very confusing to have questions (and answers) about different versions in the iPhoto '08 forum
    LN

  • Automatic start question

    How do I disable the automatic start of iPhoto every time I connect a camera? My camcorder is also a camera but I don't want iPhoto to open. Thanks!

    I also want to disable auto-start for cameras in iPhoto too, but I cannot find an option in the Preference Menu (iPhoto) or any other menu (iPhoto). Could someone point me in the right direction ???

  • IPhoto automatically flags entire library

    My iPhoto has started flagging all pictures if I flag more than about 20.
    I flag some to move to their proper events, and if I do just a few, I can click on "flagged" on the side album and see what I've selected. But if there are 30 or 40, it automatically flags all the rest of the 37,000+ photos.
    Then after unflagging, I have to close and open iPhoto for them to unflag

    Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto and try again.
    NOTE 1: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto.  You'll also have to reset the iPhoto's various preferences.
    NOTE 2:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    OT

  • How can i disable imessage from automatically starting up when i turn on macbook air?

    how can i disable imessage from automatically starting up when i turn on macbook air? i dont know my imessages to pop up on my laptop when it turns on. But i dont want to disable imessage totally on my macbook.

    Welcome to the Apple Support Communities
    First of all, check that Messages is closed when you turn off your MacBook. This is so important because, by default, OS X will reopen all opened apps the next time you start your Mac.
    Apart from that, when you go to  > Shut Down, or  > Restart, in the window you see to restart or turn off your MacBook, unmark "Reopen windows when logging back in". This will avoid that your Mac opens all opened apps the next time you start the MacBook, so Messages won't start automatically at startup

  • SAP system doesn't automatically start after restart (but manual start ok)

    Hi,
    We've got a new production line of SAP EP 7.0 systems, which have CI on HP-UX and DIs on windows. The version is NW2004s SPS09.
    What we see is that after a restart of the windows servers (usually because of windows patching), the SAP system doesn't automatically start up. It doesn't start up if I restart the SAP<SID>_<instance> service either. 
    However, I've got no problem starting the system with the MMC.
    Any idea what I am missing here? is it as simple as a profile parameter ?
    As far as I can see the profile used seem ok.
    After a restart of the windows server the following files have log entries in the c:\usr\sap\<SID>\J<instance>\work folder
    sapstartsrv.log
    trc file: "sapstartsrv.log", trc level: 0, release: "700"
    Fri Nov 17 15:51:26 2006
    <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_LIB_NOT_FOUND
    sapstart.log
    Starting WebService thread
    SapSSLInit failed => https support disabled
    Webservice named pipe thread started, listening on port
    .\pipe\sapcontrol_97
    Webservice thread started, listening on port 59713
    sapstart.trc
    Starting WebService thread
    SapSSLInit failed => https support disabled
    Webservice named pipe thread started, listening on port
    .\pipe\sapcontrol_97
    Webservice thread started, listening on port 59713
    The windows event log have the application events
    (first)SAP Service SAP<SID>_<instance> successfully started.
    (at the same time)
    Failed to update service environment from user (STATOIL-NET\<sid>adm) environment. [ntservmgr.cpp 201]
    (note that this doesn't happen for all systems which have this problem, for other there is no entry like this)
    I see no failed login attemps in the security event log, but see the that a login is performed for SAPService<SID>.
    Since it also fails to automatically startup when I restart the service, I am able to use filemon to see what happens at a file level. Here I see that it can access the shared file system without any problems, and can read the profile and everything.
    MOM is running on the server and gets some Access denied errors since it doesn't have access to the shared file system, but I don't think that matters.
    Cheers
    Dagfinn

    hi  we are using sap bw 3.5 . database is oracle 9i
    i applied a kernel patch and when i tried to start the services . there was no problem with the oracle services  and saposcol but the service sap<sid>_nr did not start .
    when i went to check the error in work folder ..
    it say " SapSSLinit failed => https support disabled  .
    then i tried to start sap from cmd pmt . din`t work .
    is there a way to statrt this ...
    thanks alot.
    arjun

  • When I first turned on iMovie all videos from iPhoto automatically were found. Now I have more videos on iphoto, how do I get iMovie to find the new ones?

    When I first turned on iMovie all videos from iPhoto automatically were found. Now I have more videos on iphoto, how do I get iMovie to find the new ones?

    jtcollins wrote:
    if iMovie is open, connect your iPhone to comp. iMovie '11 will now find your phone and look for videos as it would if camera was connected
    (Underline is my emphasis)    
    Hi jt - Alex was actually referring to video clips in iPhoto not appearing in the item "iPhoto Videos" in the Events Library in iMovie - thanks for your post though (the 2 words are very similar).
    John

  • When I insert an audio CD into my iMac, it automatically starts playing

    When I insert an audio CD into my iMac, it automatically starts playing, and I can't figure out why, nor how to stop this behavior. When I click in the upper right corner of my screen where it says "Finder", it shows the Finder as the only application running, and yet SOMETHING must be causing the CD to play. If it is an Extension that is being loaded, is it possible to terminate the Extensions one by one without restarting the computer to see which one is playing the CD?
    Is the OS9.1 operating system supposed to automatically play audio CD's when they are inserted into the iMac? Or could it be an Extension that is doing it?And if so, why is no means provided to actually CONTROL the playing of the CD (such as a control panel with PLAY, STOP, SKIP, etc. buttons)?
    On a PC, I can press Control/Alt/Delete to bring up the "Task List" that will show me ALL applications and processes currently running, and then terminate apps and processes one by one without having to restart the computer to see which one is playing the CD. Is there an equivalent way to display this information on an iMac that will show me which application or process or extension might be causing the audio CD to play, and allow me to terminate them one by one without restarting the computer until I can see which one is the "problem"?
    Jerry

    Hi, Jerry -
    Welcome to Apple's Discussions.
    Finder uses QuickTime in the background to do that, hence no specific app is shown in the Application menu (the far right item in the main menu bar) in addition to Finder.
    To unset automatic playing of CDs (and DVDs) -
    Open the QuickTime Settings control panel (Apple menu > Control Panels > QuickTime Settings).
    In that control panel, select AutoPlay from the pulldown menu in the control panel. Uncheck both the items shown in the new window. Close the control panel.
    No restart should be needed in order to make the change effective.
    Doing this will also guard against the (now ancient) AutoPlay virus, which could still be lurking somewhere on the net.

  • Tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery

    tried to reinstall OSX Mountain Lion 10.8.4 and every time i start with the installation i get a requested time out message, had to shut down my MacBook Pro retina. Now when i start up it automatically start internet recovery for two ouers. After the internet recovery the same problem with reinstalling OSX message

    Gave up on the GUI.  This script derived from http://blog.netnerds.net/2012/07/os-x-how-to-setup-nat-on-lion-and-mountain-lion / seems to work for me:
    gwdev=en0 # This is my WiFi connection (has Internet connection)
    targetdev=en1 # This is the USB to Ethernet adapter (to give Internet connection)
    /sbin/ifconfig $targetdev down
    /sbin/ifconfig bridge0 create
    /sbin/ifconfig bridge0 up
    /sbin/ifconfig bridge0 addm $gwdev
    /sbin/ifconfig bridge0 $HOST_ADDR
    /sbin/route add default -interface bridge0 -ifscope bridge0 -cloning
    /usr/sbin/sysctl -w net.inet.ip.forwarding=1
    /sbin/ipfw add 100 divert natd ip from any to any via $gwdev
    /usr/sbin/natd -interface $gwdev -use_sockets -same_ports -unregistered_only -dynamic -clamp_mss -enable_natportmap -natportmap_interface $targetdev

  • Whenever i start my ipad2 the applications automatically starts to open and close automatically jumps from one screen to another

    Whenever i start my ipad2 the applications automatically starts to open and close automatically jumps from one screen to another cannot operate the ipad at all, tried switching off and back on again, also restored the ipad but of no use

    try restart
    http://support.apple.com/kb/HT1430

  • In Lion, running on an i MAC (late 2006), how can I stop certain programs from automatically starting up when I start my MAC?

    In Lion, running on an I MAC, (late 2006), how can I stop certain programs (iTunes, Word) from automatically starting up when I start the computer?

    Any application that is open when you shut down will re-open when you restart unless you deselect this when shutting down/restarting:
    Also check System Preferences>Users & Groups>Login items tab and make sure there's nothing listed there that you don't want launched.

  • How do I prevent Firefox from automatically starting when I boot-up my Mac in the morning?

    Whenever I boot up my Mac in the morning Firefox automatically starts and displays my home page. I would only like to see the desk top with no applications running. I am running OSX 10.4.11 on my laptop.
    == Started possibly a few weeks ago.

    Hmm.. Okay I've done a bit more digging and tried the following two things before the last restart.. Not sure which one actually worked but give these a shot (one at a time) and let us know which is the ''actual'' solution! :)
    1. Open Safari -> Preferences -> General
    - change "Default Web Browser" to Safari
    - Close all applications
    - Relaunch Safari and change default browser back to Firefox.
    2. Remove the check from "Reopen windows when logging in" in the logout dialog and logout of the computer..
    I suspect step 2 is actually the proper solution, but I did both so, hopefully one of them works for everyone else!

Maybe you are looking for

  • Voice memo won't sync with iTunes

    Help! I have a 25 minute recording which won't play on my iphone and won't sync and download onto my iTunes! What do I do?

  • Re: logical database

    Hi,     What is the logical database. I know how to create. I think it is useful for dynamic selections of parameters. This logical databases use by HR ABAP. Is it right? But i heard that these will increase performnace of ur coding. How can u justif

  • The print window settings dialog box will not come up

    When attempting to print a website, I need to select the option to print as laid out on the screen as described in this how-to: https://support.mozilla.org/en-US/kb/how-print-websites#w_print-window-settings. However, I have attempted to get this dia

  • Re: Lookup Links in Express

    I've been trying to set up a lookup link in Express and can not get the lookup type to come up as an option on the Link Properties window. Any ideas why not? Thanks, KirstinKirstin, In your business model the relationship between the tables must be a

  • How to install my CS3 for PC onto my MAC OS X

    Hello, I own CS3 design premium for PC, is there anyway to transfer it over to my MAC OS X snow leapord?