IPod Freezing when connected to computer

My problem seems to be similar to all of the other problems people are having with iTunes 7, but I couldn't find something the same as mine, so here's my problem. Whenever I connect my iPod to by Powerbook G4 (this is only after i installed iTunes 7, my ipod shows the 'Do Not Disconnect,' but freezes - the circle with the cross does not flash. I proceed to reset the iPod, after which I can connect to my computer with no problems (iTunes 7 is really annoying, but i assume an update soon?????).
Is my problem an issue with iTunes 7 and will be solved with the supposed update, or does anyone know what might be causing it.
Thanks a lot

Hi Everyone.
I've been having the same problem. i have a 5G ipod.. i did the latest firmware update a while back, and the iTunes 7 update. After that, whenever i connect the ipod to a mac, i see the red circle with a line through, and its not flashing, then the ipod is locked up. only way to make it work is reset the ipod while its connected..
I tried a full restore, and that did not help.. then I pretty much gave up, and hoped that Apple would release new firmware.
In a last attempt of hope, i thought i would connect the ipod to my new makbook pro.. just to see if it was a problem with the imac. well, same again. ugh. rats..!
So, i tried a full restore from this 'new' computer..
This time, i noticed something different.. iTunes decided to download the firmware again, and re-flash the iPod.. (with the same version)
ah.. now it works !!! i went back to the imac.. connected it.. loaded up all my tunes.. and it works.. disconnect.. plug back in.. no freeze !!!!
So, it seems that if you can try another mac, and restore.. or indeed get the firmware to download again, and apply to the iPod.. it just might work !!!
Hope this helps some folks out!
Cheers, Keith
imac CD, MacBook Pro C2D, macmini PPC   Mac OS X (10.4.8)  
imac    

Similar Messages

  • Ipod freezes when connected to computer and cannot restore

    When I connect my ipod to my computer itunes does not recognise it for a long time, when it does it says the ipod may be corrupted and to do a restore. So I click restore, and the warning message comes up about erasing the songs. I click yes then an error message comes up saying that the resource is not available. When I click eject, the ipod dissapears from the source list but the do no disconnect thing stays on the ipod screen and dosent even flash.
    My ipod has not been recognized by itunes since the latest update, so I uninstalled the ipod driver and this problem has been happening since

    If you look through the forum there appear to thousand of people who have this problem. Here's what we know so far:-
    1. The problem is related to iTunes v7 and the firmware v1.2 on later ipods.
    2. it is a bug in the firmware that gives any/all of the following symptoms
    - freezes after re-set
    - freezes during restore
    - cannot sync
    - cannot eject
    - cannot switch off
    - basically CANNOT USE IPOD AT ALL
    3. the problem appears to have been known to apple for at least a couple of weeks but they have not found a solution and for the time being they have also chosen to not even acknowledge the problem to re-assure users that their hardware is OK and a software fix is on the way.
    4. Contentious posts are being deleted by Apple (I have already had 2 removed so get this one while it's hot)
    keep the pressure up!!!
    They will have to acknowledge it and fix it

  • IPod freezing when connecting to computer

    Hi, I've been running with iTunes since 4.7 but after the 6.0 upgrade everything's been unuseable for me. The biggest issue is that my iPod can no longer sync, or do anything -- anytime I plug it into the USB port on my computer, everything freezes. The ipod sits there with the Do Not Disconnect message, and the computer sits there frozen, no longer taking any mouse or keyboard input.
    I tried remove itunes and quicktime, reinstalling, and reimporting my library but that didn't change anything. It doesn't appear to be itunes related, I just grabbed the most recent ipod updated and installed it, but the same freeze happens when plugging in the ipod, even without itunes running. So I currently can't update the ipod at all, let alone sync it. Any suggestions?

    hmmm. are those USB mice and keyboards?
    Yes, thanks much for the quick reply, I've tried on a different USB bus and the mouse and keyboard no longer freeze (although this is not a good long term solution since I can't really use this port easily), but things still don't seem to be working. When plugged in, the ipod sat there for maybe 10 mins saying Do not disconnect. Then the iPod updater window appeared, but it was frozen. Then after about 30 minutes or so the updater window appears to be useable, but the Update button is grayed out and the Name, Serial Number, Software Version and Capacity all say N/A. The obvious thing to do is Restore, but I'm a little nervous, at least right now I can use my ipod with the music I had loaded before all this happened, if I restore and still can't sync then it's just hosed.

  • IPod Classic 80 GB Freezes when connecting to Computer

    Hi.
    My iPod Classic 80 GB Freezes when connecting to my computer (Vista... yes... I know). I've got my iPod for over a year now and I've never had real trouble with it.
    When I plug it in (iTunes already running) my computer gives me the 'thumbthumb' noise because an USB thingamajib is connected to the computer. At this moment my iPod freezes and stays on. iTunes doesn't seem to find my pod. When I disconnect my iPod, it'll stay on (doesn't go energy safe mode) and stays frozen until the battery is empty. But by then, I've already lost my playing info (Which I really value).
    Pllllllease help me out her.

    Someone has finally found a solution to this problem and i decided that i would spread the word around ... so here are the steps:
    1) Quit iTunes.
    2) Delete iTunes from your Applications folder.
    3) Go to your ~/Music/iTunes folder. Delete or rename the "iTunes Library" file.
    4) Open the "Previous iTunes Libraries" folder and look for the backup of your old pre-9 library; it should be dated at about the time you first ran iTunes 9. Copy it back out to the ~/Music/iTunes folder, and rename it to "iTunes Library".
    6) Go to <http://support.apple.com/downloads/iTunes8_21> and download iTunes 8.2.1. The page says it's for G3, but the Read Me file says it'll run on G4, G5, and Intel too. Open the diskimage and run the installer.
    You should now be able to run iTunes 8.2.1 again.
    And your iTunes will restore to before you upgraded and you won't lose anything.
    *If you download the iTunes file from the "support.apple" link, and you can't open it, go to http://www.mydigitallife.info/2009/06/28/apple-itunes-8-2-and-quicktime-7-6-2-di rect-download-links/ and download "iTunes 8.2 for Windows: iTunesSetup.exe
    WhittWhitt

  • My ipod freezes when disconnected from computer

    Help!!!! Although my ipod works when connected through itunes, once i disconnect it, it will not respond whatsoever. The screen says its in disk mode even though i never put it in disk mode. How do i get it to respond?

    Reset your iPod, then put it into disk mode (doing it yourself). Connect your iPod to your computer again and what does it say to you now? "OK to Disconnect", "Charging", "Do Not Disconnect", etc...
    If you want to get your iPod out of disk mode, reset it.

  • Ipod won't sync and freezes when connected to computer

    I can no longer sync my ipod. When I connect it to my computer my ipod freezes. It remains frozen for 4-5 hours after disconnected from my computer. It eventually just unfreezes by itself.
    I think it is a virus or something but my virus scan shows nothing.
    any ideas?

    Have you seen this post? http://discussions.apple.com/click.jspa?searchID=-1&messageID=8451088

  • Ipod not being recognized/freezing when connected to computer

    Hey all
    My Photo Ipod has stopped syncing with my computer. When I plug it into the firewire cable it just freezes on whatever screen it is on and doesnt appear in Itunes, or under My Computer. I have tried resetting the Ipod while it is connected to the computer, it gets so far as the apple screen and then locks up and stays on that screen till I unplug it. I know the issue is not the dock connector, because it works just fine when I plug it into my FM Transmittor in the car. Any help would be appreciatted.
    Thanks

    Have a read
    http://discussions.apple.com/thread.jspa?messageID=2001071#2001071

  • IPOD Nano freezes when connected to computer

    I got my ipod about six months ago. It worked fine until about a month ago, it started freezing as soon as I connected it to the computer. I have tried restarting the computer while it's connected. I have tried restarting the ipod while it's connected and when it's not connected. I have tried reinstalling the latest version of itunes on my computer. Of course, I can't restore the ipod, because it freezes within seconds of connecting to the computer. NOTHING works. The ipod still recharges, but I can't restore it, or download any new songs because it just freezes on the Do Not Disconnect message. I have tried different computers (Dell Laptop, MacBook Pro, Compaq PC) but it does the same thing on every computer. Does anyone know what to do about this? I have tried all the suggestions on the Mac Support page. Please help! This is so frustrating :_(

    have you looked at this one yet?
    http://docs.info.apple.com/article.html?artnum=32222
    Yes, thanks for the suggestion, but as I mentioned, I have gone down the list of all the apple support recommendations and nothing has worked. I need NEW ideas if anyone has had the same problem or I guess I'll have to take it in for servicing.

  • Computer doesn't recognize ipod and ipod freezes when connected via USB

    My ipod has developed a problem.
    1. When hooked up to a computer it suddenly is not recognized by the computer--there is no "sync" noise and it odesn't appear in itunes. Also, all the buttons cease to function.
    2. Interestingly, it still works fine in my Boise player and also when in the car via audio cable.
    3. When i unplug it from the computer it works fine again.
    4. I tried a manual reset into disk mode hoping that i could "start over." Bad idea--still no connection AND now everything is off it.
    Any ideas to help with this?
    Thanks a ton.

    I have tried with two different cords and in different USB ports. I think it is an ipod problem, not a computer problem.

  • IPod freezes when connected to PC

    This might be related to a problem i have with some songs not playing, but now when i connect my ipod to the computer to sync it just freezes - not charging or syncing. Could anyone help with this problem?

    yeah this is still happening, and it won't sync any of my music, it will only charge it. could anyone help at all?

  • Ipod freezing when connecting to pc

    i just purchased a 30 gig ipod this summer, but when i plug it into my pc, the ipod lights up and freezes on the first menu...the ipod stays on this screen until the batteries drain. This has happened all but one time when plugging it in.
    i can't even turn it off when its frozen.
    any help??

    If your iPod shows up in Explorer under 'my computer' try changing the drive letter:
    -- Click on Start=>Control Panel=>Admin Tools=>Computer Management=>Disk Management
    -- Right-Click on the iPod and select “change drive letter”
    -- Choose something further along in the alphabet that is unused (Usually, “M”, “N”, “O” or something similar)
    -- Safely eject the iPod
    -- Reboot the PC

  • Ipod crashes when connects to computer

    My 20 GB Ipod has been acting funny the last couple of days showing me the battery sign with the exclamation mark, not allowing me to turn it on, I have managed to correct this by placing it on charge with the mains adapter. The Ipod now starts fine and plays all the songs with no errors but as soon as I connect it to the computer it crashes and freezers on the position it was left in, not even reaching the "do not disconnect screen". The computer only sees it as a un- recognizable USB device. I have to restart it to get it working again but as soon as I try and complete the connection with my PC again it crashes. There is also a new sound when I start the Ipod like 2 little faint beeps that have never been there before.
    Please can somebody help as I use my Ipod as my hard drive plus over 2000 songs that are not backed up.
    Thanks

    I still have no look with my pod, ive tried everything, it plays fine but will not connect to the computer and crashes, i am now able to get do not disconnect sign and the disk drive logo but it just freezers and stays on that screen. It also generates a Removable disk drive in My Computer but cannot access it.
    Please can somebody help me out there
    Thanks

  • IPOD freeze when connect to Mac

    have a 80 gig 5th gen IPOD and every time I connect it to my Mac (OS X) it freezes.
    The computer seems to recognize something it's being attached but it doesn't show up in Itunes and the "Do Not Disconnect" pops up on the IPOD. However, it will flash once and then freeze up. I have to restart the IPOD while it's connected to the computer to get it working and connected.
    This is a MAJOR pain. Does anyone know a solution to this?
    Software on both sides is up to date.

    I have the same problem with mine - 5th generation. I can get it to reset by unhooking it from the computer "even though it says do not disconnect." Then I push and hold the wheel and menu buttons. That may take a couple of tries. I get it to reset. But can't hook up to iTunes and download new songs and books. It will charge though. Not sure what is going on. I have the latest update etc. Just started doing this in July. Wish someone would post the reason and the fix.

  • 20G iPOD freezes when connecting to home stereo and other components

    When i connect my iPOD to my home stereo through a docking station the iPOD buttons become disfunctional. it only plays one song and then it "shuts down". Not really shuts down because the iPOD is still on and as soon as i remove it from the docking station, it works fine again. Any ideas?

    "However, most of the cables I find use the headphone output. "
    Yep, thats fine, just get one of those!
    MiniJack (3.5mm; small headphone output) - L/R Cinch Audio Jack, as you say.

  • Why doesn't iPod respond when connected to computer?!

    I've never had this problem before. All of a sudden, one day I connected my iPod to the computer (windows xp)- and big fat NOTHING happened. No connecting doo-deep like usual, nothing. I was shocked. Annoyed. And I ran off and connected it to my charger to check it still worked and confusingly (but luckily) it did. I looked at all the solutions to this on the apple website so far but none of them have helped. So unless someone can help me out then I guess I just have to assume that my precious iPod Touch is somehow screwed :'( ....... Hey, at least I can still get new apps and stuff. As for updating my picture library, well, let's just say that won't be happening.
    p.s. my iPods about 1 and 1/2 years old (so my guarantee is soooo over) but apart from that lil' connection prob. it seems fine.

    Welcome to Apple Discussions
    Don't run out and buy a new iPod just yet. It sounds like the critical piece of software that communicates with the iPod and iTunes. This software is known as the Apple Mobile Device Services. For troubleshooting help with this, see these two articles:
    http://support.apple.com/kb/TS1567
    http://support.apple.com/kb/HT1747

Maybe you are looking for

  • After reboot only have black screen with text I don't understand

    I was listening to itunes and hit pause and got the forever pinwheel. I rebooted and now can only get a black screen that says: hfsswapBTNode:offsets 29 and 30 out of order (0x18D0, 0x14DC) /etc/master,passwd: Input/output error localhost:/I have no

  • I pod code for volume (forgot number code)

    Hello... my I pod has a code where you have to put in a number(code) to change the volume. I had forgot the number code to be able to change it. What can I do to change this so that I mite be able to use the correct volume(limit)? Also this is under

  • How do i get hawaii in iOS 6 clock - world clock?

    Trying to add Maui or Oahu to the world clock.  Can't find anything that is in the Hawain Islands. Does anyone know a way to add one? Thanks

  • No LUck with inserting flash video

    I can still create the video and the files and it all works in dreamweaver when I preview in iexplore. When I put the files and the page into the host server it shows the skin and no video. If my paths are wrong I do not know where to  check them. I

  • Web Dynpro ABAP in SAP BPM

    Hello, I want to know if it is possible to integrate Web Dynpro ABAP in a BPM Process or it only supports JAVA Web Dynpro. If yes, how can I do this? Thanks & Regards SU