Ipod, nano 4th generation, will not charge using my PC or my dock.  It's 5 years old and has charged using both methods since I got it.

My ipod will not charge when connected to my dock or my computer.  I will play when connected to both.  I have tried both USB ports, checked the connections on my dock (power light is on) and it will just not charge. 

Howdy Crickety22,
Using the USB cord in different locations is a great way to help isolate this kind of issue. Since you have done that, the next step I would recommend is testing a different USB cable with the device.
Check out this info from the article named Archived - iPod's battery doesn't charge found here http://support.apple.com/kb/ta44551
Faulty cable
If something is wrong with the FireWire or USB cable that came with iPod, it may not supply any power to charge the battery. Note: Only iPod models with a Click Wheel can get power from a high-powered USB port using the supplied cable (includes iPod mini, iPod (Click Wheel), iPod photo, iPod with color display, iPod nano, and Fifth Generation iPod).
Make sure you are using the cable that came with iPod. Some third-party cables may not work properly with iPod.
Make sure nothing is in or blocking your computer's FireWire or USB ports.
Check the connections to make sure the cable is completely plugged in.
Try another known-good FireWire or USB cable if available.
If this resolves the issue your FireWire or USB cable needs to be replaced. You can arrange for replacement at theiPod Service Website.
And this part as well:
Faulty dock connector or FireWire port on iPod
If something is wrong with iPod's FireWire or Dock Connector port, it may not supply power to iPod.
Make sure nothing is in or blocking iPod's FireWire or Dock Connector port.
Check the connection to make sure the FireWire or Dock Connector cable is completely plugged in.
If this did not resolve the issue iPod needs to be repaired. You can arrange for repair at the iPod Service Website.
Regards,
Sterling

Similar Messages

  • My ipod nano 4th generation will not turn on or charge.  It is just sitting (frozen) at a black screeen.

    My ipod nano 4th generation will not turn on or charge.  It is just sitting (frozen) at a black (blank) screen.  What do I do?

    Hello, HJA-heartgirl. 
    There are a couple things you can try to troubleshoot this issue.  Below, I have included a couple articles that will help you troubleshoot your iPod.
    How to reset iPod
    http://support.apple.com/kb/ht1320
    iPod nano (4th generation) Troubleshooting Assistant
    http://www.apple.com/support/ipod/five_rs/nano4gen/
    Regards,
    Jason H. 

  • My Ipod nano 4th generation will not charge or turn on! Please help

    I bought a refurbished Ipod nano 4th generation 2 weeks ago from a good reliable ebay seller. It arrived and was in great working order with no issues what so ever. However this evening I realised it was out of battery, so I went to charge it and nothing. No light up, no recognition of it being plugged into the PC or when I try via a plug socket. I have contacted the seller about this asking for a refund as I have not done anything or put it anywhere that it would die like this. However I thought before I try to send it back I would try here and see if anybody knows what may be wrong with it.
    Thanks

    You need a new battery. 

  • What do you do when your ipod nano 4th generation will not turn on even if you charge it?

    i have a 4th generation ipod nano and it died so i tried charging it for an hour and it wouldn't turn back on. then i connected it to my computer and it would not even turn on or show up on my computer. What do i do?

    You could try taking it to a Mac store and see what they have to say, but it might just be dead.

  • My ipod nano 4th generation will not turn on when i rstart it it gets stuck on the apple icon screen what do i do

    my iPod will not turn on when I charge it or restart it it just gets stuck on the apple icon screen what do I do to fix it

    Hello crimsonflare,
    Try this first:
    Apple - Support - iPod Troubleshooting Assistant
    If that does not work, use this:
    Putting iPod into Disk Mode
    and try to restore you ipod.
    Hope this helps.
    ~Julian

  • My ipod nano 4th generation will not sync

    I am trying to sync the photos onto a new computer but it does nothing

    it is usually one way from pc to ipod nano, not the other way around

  • My ipod nano 4th generation will not connect to my windows vista computer.

    I am attempting to add new songs to the nano but it is not recognized by my computer.

    The following may help: iOS: Device not recognized in iTunes for Windows

  • My ipod nano (4th Generation) will not turn on

    I just got my ipod 3 months ago and its been working fine until today. The only reason I can think of is- ok my mistake- I was in my hot tub and I had my ipod on the IHOME (I believe that is what you call it)...... and I might just splash a little. The problem is that I put the IHOME up after I get out and I leave the Ipod on the IHOME. And I find the next day that it won't work. So now I'm freaking out so if there's anybody there.......HELP!!!!!!!!!!!!!!!!!!!
    P.S. The port where you put the USB cord in the Ipod smells burnt

    OK:Because I already had one water damaged,here is what I am going to do.Apple should be doing this because I think leaving the adapter port wide open is inviting water damage disaster(a bit of sweat,splash of water from the kitchen sink)
    I ordered 2 oem travel chargers for .68/each.
    I'm going to cut off the charging cable and use the adapter plug to protect that opening while using the nano.
    Anything is better than nothing.

  • My ipod nano 4th generation will not turn on, and is no longer detected by the computer and itunes. What to do?

    help me please !!

    Sounds like a dead battery. Take it into your local Apple store/Genius bar and see if there is anything they can do for you.  Another option is to send it in to a third party repair company who can replace the battery at a pretty low cost.
    B-rock

  • My ipod nano, 4th generation, is not being recognized by my computer or itunes

    my ipod nano, 4th generation, is not being recognized by my computer or itunes, what do i do? I've tried using different cords, but nothing will pick it up.

    I am experiencing the same issue.  I have Mavericks with updated iTunes, reset both, not detected

  • My ipod nano (5 generation) will not charge.

    My ipod nano (5 generation) will not charge. Sometimes, if I connect it to the computer, turns on and appears on the screen a battery. Other times I connect it, and will not turn on anything. If you load it, I can use it, but if I turn off the ipod, after does not turn on. I tried to reload it with an outlet to the current, but does not turn on. Can I fix it? How much does it cost?

    You need a new battery. 

  • My ipod touch 4th generation will not charge or cut on? can you please tell me whats wrong with it.. i have tried the holdin the home and lock button at the same time and still won't cut on

    hello my ipod touch 4th generation will not cut on or charge. i have tried the holding the home and lock button and still won'ty work. i don't know what to do. can you help me please

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • HT1459 MY IPOD NANO 6TH GENERATION WILL NOT TURN ON I GOT IT FOR CHRISTMAS AND PLAYED THE RADIO ON IT WITH OUT PLUGING IT INOT ITUNES AND I WAS WONERING HOW TO FIX IT ?

    hi my ipod nano 6th generation will not turn on what should i do ...no batery left and never pluged it into itunes

    Hi meganisawsome,
    If your iPod will not turn on and you are getting indicators that there is no battery left, the first step would be to make sure that the iPod has been charged correctly. You may find the following article useful:
    Apple Support: Charging your iPod battery
    http://support.apple.com/kb/HT1384
    If you are still having issues after charging, you may want to look at this article:
    iPod nano (6th generation): Hardware troubleshooting
    http://support.apple.com/kb/TS3474
    Regards,
    - Brenden

  • My ipod nano 6th generation will not turn on.

    My iPod nano (6th generation) will not turn on. I have charged it (attached to my computer) for 30 minutes. I have tried to reset it (held down Wake and Volume Down for 8 seconds)- no response. I have factory restored it (through iTunes)- no response. It shows up as connected to my computer and will sync in iTunes, but the display on the iPod will not turn on. Any ideas?

    Hey s.mccarter2010,
    Thanks for the question. After reviewing your post, it sounds like you have tried a lot of things and the iPod still will not turn on. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
    iPod won't turn on
    If you have tried the solutions above and iPod still won't turn on, check the following:
    Make sure iPod is the only device in your FireWire or USB chain. Disconnect everything but the mouse, keyboard, and your iPod, then see if it will turn on.
    Make sure you are using the FireWire or USB cable that came with your iPod, and that the cable is in good condition.
    Try connecting iPod to the built-in port of a different computer to see if that works. Note: If using a portable computer, make sure it is plugged in to a power source and that the lid or display is open. If the lid is closed the computer may go into either standby, sleep, or hibernation mode and iPod will not charge properly.
    If you still can't turn iPod on after performing these steps, it may need to be repaired. You can arrange for repair at the iPod Service Website.
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • IPod shuffle 4th generation will not connect to iTunes.

    iPod shuffle 4th generation will not connect to iTunes.  Windows Vista and iTunes, all updates current.  Cables secure & connected.  Device driver will not load.  iPad will connect when tried with several other computers.  When I try to connect it will hang iTunes until I re-boot.  iPad does NOT appear in Windows Explorer either.

    Oh, so the iPad DOES work fine connected to the same computer and the same port.  I thought you said it did not in the first post, but maybe you got that working (or I misunderstood before).
    NOTE:  When things are working properly, the shuffle will not appear in Windows Explorer (except when actively syncing), unless you have Enable disk use turned on for the shuffle.  So not seeing it in Windows Explorer may not be a problem.
    Is this shuffle a new purchase... so it did not previously work for you on this computer?  If so, make sure that the shuffle end of the USB cable is fully inserted into the headphones jack.  The fit can be tighter than expected, and it may seem connected, but is not.  For a surprising number of people, this was the problem.
    In iTunes, is the sidebar (along left side of window) visible.  If it is hidden, from the iTunes menu bar, under View, select Show Sidebar.  When there are no devices connected, the heading DEVICES should not appear in the sidebar.  When you connect your iPad, DEVICES should appear, with the iPad listed below.  If you connect the shuffle, it is be added to the list under DEVICES.  To confirm, you do not see the shuffle listed there under DEVICES, when it is connected?
    When you connect the shuffle, does its light on the shuffle do anything?

Maybe you are looking for

  • Qosmio F60 keeps freezing up

    Ok Im getting desperate here, I really dont want to get my F60 repaired. Ive had it for about 2 weeks now, and it constantly freezes. It freezes mainly when I put the thing to sleep. It also freezes sometimes when booting up, waking up, switching use

  • Report Manager & Essbase

    Does anyone know if you can use Microsoft Report Manager to connect to Essbase?  If so, is there an additional licensing needed?

  • Export from Premiere to Encore to create a Blu-ray

    Hi! I've imported in Encore CS4 an HDV footage that I've edited in Premiere CS4. The footage was exported using Blu-ray H264 settings. I inserted the video and audio file into the project, I burned fine the Blu-ray, but the final result was that the

  • If you use your home wifi, can your parents see your iMessages?

    I'm just wondering if you use your home wifi can your parents see your iMessages?

  • Su command: Terminal does not read root's bash profile.

    When I enter the su command to gain root access, the user id changes to root but it does not seem to read the .bashrc file in the root directory. One symptom is that the prompt symbol remains '$' rather than changing to '#' If I enter the bash comman