IPod Touch is stuck in "connect to iTunes" screen. It is not recognized by iTunes or by my Windows (64-bit) computer.

I recently purchased a new laptop after my old one ceased to function. Therefore, I had lost ,my old iTunes, and my iPod is no longer authorized by a functioning computer. I downloaded the latest version of iTunes, plugged my iPod in, and tried to install the new iPod Touch software update. I got the error message that the installation had failed, and iTunes automatically ejected my iPod, leaving it in the "connect to iTunes" screen, in which it has been stuck ever since (about 9 days now). I have uninstalled and re-installed iTunes, have rebooted my computer numerous times, I have tried various holdings of the power button and home button as recommended on several help forums, etc. to no avail. I am using a Windows 7 (64-bit) system on a brand new HP Pavilion dm4 laptop with plenty of space and the newest version of iTunes installed. My iPod Touch (3G) is not being recognized by iTunes or by my laptop. I would like to, if possible, restore my iPod to original factory settings so that it can be authorized on my new laptop and will sync approrpiately. Any help anyone can provide will be immensely appreciated. Thank you.
Also, the iTunes is the version for a 64-bit Windows OS.

- First I would remove and reinstall all the Apple software using the following and then restoring the ipOd.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
- Next see if manually placing the iPOd in recovery mode will allow a restore. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Next try DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Next try another computer/cable to help determine if you have a computer or iPod problem.
- If the other computer works and yours does not see:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

Similar Messages

  • My iPod touch is stuck on the apple logo screen.  What do I do?

    My iPod touch is stuck on the Apple logo screen.  What do I do??

    Hello Melissa,
    Have you tried a hard reset yet?  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.  You may need to try this more than once. 
    Any luck there?
    B-rock

  • IPod Touch still stuck on connect to iTunes screen after the restore. iTunes went blank.

    Hi, I'm having problems with my iPod Touch. My iPod went off because the battery was empty. And when I tried connecting it to my laptop to recharge, the "connect to iTunes" screen suddenly appeared. According to iTunes I need to RESTORE it for it to work. And that's exactly what I did. However, after the restore and all, the screen is still stuck on the "connect to iTunes" screen.
    By the way, it's a 2nd generation iPod Touch. And it's an MC model.
    And to make things worse, my iTunes screen is totally empty. The RESTORE option is gone and I really don't know what to do anymore.
    Hope you guys can help me out! I'd really appreciate it. Thank you!

    I really don't know what happened but my iPod Touch is working now!!! Thank you so much! I'm not really sure if it went to DFU mode or not but all of a sudden I can access iTunes App Store already!!! WOOOOAAAAHHHH! And it asked me to type in a new name for my iPod! So everything's good! Thank you so much! Thank you! You have no idea how happy I am right now!
    For my iTunes:
    Thank you!
    P.S: Grrrrrrrr! My bad! I'm new here and I kind of messed up the Correct Answer and Helpful Answer buttons. Sorry. Dunno how to change them.

  • My ipod touch is stuck in connect to itunes screen. I've tried to press Power and Home button at the same time for 10 seconds and all it does is go to a black screen. Press power button again and the usb cable with an arrow towards an iTunes logo.

    I have a brand new Ipod touch with front facing camera. Not sure which generation it is. My wife connected the iPod Touch and chose the restore option when connecting to iTunes. It was a mistake and by the time I got there, I saw the screen with USB cable with an arrow facing towards iTunes logo. I cannot get the iPod out of this state.

    Try here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    Also reset the iPod.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.

  • IPod Touch 3rdGen stuck in connect to itunes mode and driver missing

    Ok what happened was I wasn't at my own house and and I wanted to put some new music on my iPod touch 3rd Generation. I had to update to the new itunes first. Then once I was finished I remembered I had to update my iPod touch so I clicked on update. Then at some point the ipod screen had the USB connect to itunes and a window comes up saying Windows needs to install driver software for your apple mobile device ( recovery mode ) and my computer cant find it. I have went into the device manager and when i click on properties for the apple mobile device recovery clicked properties and in the device status box it sais
    "This device is not configured correctly. (Code 1)
    There is no driver selected for the device information set or element.
    To reinstall the drivers for this device, click Reinstall Driver."
    I have looked to re download the drivers and I can't find them. The other problem is my primary computer is not working and if i have to completely reset my ipod i will lose practically everything because I have a feeling my primary laptop is getting reset.
    So to conclude it's really saying my apple mobile device recovery mode is there, but there is not a driver installed to it.

    - First I would remove and reinstall all the Apple software using the following and then restoring the ipOd.
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    - Next see if manually placing the iPOd in recovery mode will allow a restore. For recovery mode see:
    iPhone and iPod touch: Unable to update or restore
    - Next try DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Next try another computer/cable to help determine if you have a computer or iPod problem.
    - If the other computer works and yours does not see:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • My ipod touch is stuck on the apple logo screen, I've tried everything on the troubleshooting website but nothing worked, any suggestions?

    My ipod touch is frozen on the apple logo screen, I've tried everything on the trouble shooting page and nothing works, any suggestions?

    Please tell us what you tried (the support page) to avoid wasting ours and your time.

  • HT1430 cannot get my phone off of connect to itunes screen and wont be recognized by itunes

    i tried to do a restore on my iphone after updating software on my phone due to several other problems.  now i am unable to turn off phone.  it will not come off of the connect to itunes screen.  however when i connect to itunes it does not get recognized as a device on itunes

    Hey courtnoah,
    That sounds frustrating! I'm here to help. It sounds like your iPhone is currently in recovery mode. This means we will have to restore the device. However, if the device is not recognized in iTunes we'll need to refer to the following information:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    The most relevant information may be in Section 5: "Verify that the Apple Mobile Device USB Driver is installed" and excerpt "If the device is not recognized while in Recovery Mode". If those steps do not immediately resolve your issue, please follow the rest of the article.
    For more troubleshooting on recovery mode, you can also refer to the following:
    iPhone - Restore Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/restore/
    Thanks,
    Matt M.

  • IPod Touch is stuck on "Connect To iTunes" screen

    My iPod Touch won't turn on correctly. I'm able to reset it, and then turn it back on. But when I turn it back on it says that it needs to be connected with iTunes. So when I plug in my iPod, it comes up on iTunes saying that my iPod could not be registered because it's locked. Now I've realized that it says it's "locked" because there's a password you have to type in before it goes to the main screen.
    There's no way to type in the password, however. Which means that it won't connect to iTunes. Which, in turn, means that it's always stuck on the "Please Connect To iTunes" screen.

    See this: http://support.apple.com/kb/HT1808

  • IPod Touch 4G stuck on "connect to iTunes screen" after iOS 4.2 install

    Hi, I just got the new iPod Touch 4G. When I first plugged it into the computer, everything worked fine; iTunes recognized it, I set it up in iTunes, and I was even able to play with it temporarily. When I tried updating to the iOS 4.2, when the update was almost finished, I got an error message. Now it it just stuck on the "connect to iTunes screen"
    Yes, I have the latest version of iTunes.
    Yes, I uninstalled all Apple programs then re-installed iTunes (many times)
    Yes, I have updated the drivers
    Yes, my devices are "enabled"
    Yes, the Apple Mobile Device Service is started and automatic
    Any other ideas?

    I really don't know what happened but my iPod Touch is working now!!! Thank you so much! I'm not really sure if it went to DFU mode or not but all of a sudden I can access iTunes App Store already!!! WOOOOAAAAHHHH! And it asked me to type in a new name for my iPod! So everything's good! Thank you so much! Thank you! You have no idea how happy I am right now!
    For my iTunes:
    Thank you!
    P.S: Grrrrrrrr! My bad! I'm new here and I kind of messed up the Correct Answer and Helpful Answer buttons. Sorry. Dunno how to change them.

  • IPod touch is stuck on "connect to iTunes" but iTunes won't recognize my iPod touch

    So I was trying to update my iPod touch and left the room, thinking I had plenty of time to get stuff done while I waited. When I returned there was a warning saying that my iPod touch couldn't be updated and my iPod screen was stuck on the "connect to iTunes". I tried reconnecting and iTunes will not recognize it. I've tried restarting my computer and my iPod and I've tried reinstalling iTunes and restoring my iPod, but nothing is working. Any suggestions?

    - Try placing the iPod in Recovery mode and then restoring
    - Next try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - Try on another computer to help determine if you have a computer or iPod problem.

  • Ipod touch 5 stuck on connect to itunes screen

    We just purchased a used, factory reset, ipod touch 5 gen for our son to replace his 4th gen. we are attempting to "restore from itunes". i got the ipod to sync to itunes and everything is up to date, but the ipod doesnt continue onto the restart so it only stays on the "conect to itunes" screen! any ideas??! i tunes says that all our stuff is on the new ipod also. i tried manually restarting the ipod too but it just takes us back to the initial setups screen.

    Try DFU mode and then retore via iTunes.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:                                                             
    iTunes: Restoring iOS software
    To restore from backup see:
      iOS: Back up and restore your iOS device with iCloud or iTunes

  • My ipod touch is stuck in the apple loading screen

    my ipod is the 3rd gen it was frozen so i had turned it off than i turned it back on to find the appe loading screen its been on for thw past three hours i tried to connect it to itunes but its lock and i cant put my passcode in to unlock it help please

    Try here:
    iOS: Not responding or does not turn on
    Also try placing the iPod in recovery mode and restoring via iTunes. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • When I try to connect my iPod touch I get an error message that the "phone" is not recognized, unknown error 0xE8000084.  Help

    I am using my husband's old iPod touch and when I try to connect it to iTunes I get that error message.  It is recognized in my computer as unspecified under Devices and Printers

    Thanks.  I had searched for that error message but had the whole number and nothing came up.  I followed the directions and now it is recognized.  The only thing I hadn't done before was to disconnect my external hard drive.  Go figure.

  • I have been trying to restore my ipod touch for several weeks.  It shows on the ipod the usb to itunes screen but is not recognized by the computer.  I have tried 3 different laptops and a generic usb and nothing has worked.  Would appreciated any advice

    I have been trying to restore my ipod touch for several weeks.  The ipod is on the usb-itunes screen but the computer will not recognize it.  I have tried three different laptops and am now very frustrated.  I have also tried several different usb connectors. 

    Try putting the iPod in DFU Mode vs. Recovery Mode.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • My ipod touch no longer will connect to internet? it will not even let me connect to wifi

    i bought my ipod touch in 2010. i loved it. i could connect to the internet and everything.. after a recent update, i can no longer connect to the internet.. i cant even turn wifi on now.. any reason why? and solutions?

    If wifi is grayed out, go here:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    Frequently, it is due to a hardware problem and an appointment to the Genius Bar of an Apple store is in order.

Maybe you are looking for

  • Preview of DMS document error

    Dear all, I am a QM guy and using DMS. Now, I have a issue for DMS. Our vendor upload excel file to vendor inspection LOT using Supply portal. Then we can see the document in CV03N. When we click the file in CV03N, we can open the excel file. Vendor

  • Numbering Headings in the PDF output

    RoboHelp HTML 6 To create the RoboHelp project, I imported a Word document, which created a topic for each heading. Now, besides HTML help, I want to generate printed documentation in PDF. How can I create numbered headings (e.g. 1, 1.1, 1.1.4 etc) i

  • BAPI /BADI to trigger customised E-mail Information to mail ids

    Hi All, Is there any BAPI/BADI's to trigger E-mail information from SAP GTS system to personal- email Id's like (@hotmail.com/@yahoo.com), is there any specific Configuration settings that needs to be done for this in SAP GTS? With Regards Debasish

  • Can't rename Setting Group

    I create a new Setting Group which appears as an Untitled Folder in the Settings Dialogue. I have double clicked on the name, right clicked, Spaced, Returned... I can't figure out how to change the name of the folder. Any thoughts? Thanks! TAK

  • T code for inv output type

    Hi all, We have 2 SD inv type - standard output and attachment required. Can anyone tell me what transaction code would allow us to create others? Thanks Ciara