IPod won't connect for longer than 30sec... what the heck?

This stupid animal is driving me crazy.
I dropped my mini a few months ago and it started giving me the "folder-with-exclamation-point" jazz. A friend told me that running iPod updater on it would fix my problem, and the support section of this website says the same. I have iTunes 7.02, and the pod is charged.
Now, the iPod repeatedly cycles through the same actions: it beeps twice, displays the "do not disconnect" screen, and my computer recognizes it. Before it has a chance to show up in iTunes, though, the pod clicks, the screen vanishes, and then displays the apple symbol. The computer stops recognizing it and, within about 30 seconds, it displays the folder-exclamation-mark icon again. Then it repeats the cycle, again, and again, and again...
If it would just stay awake long enough I'd update it, I swear!! Please help... I miss my music!!

iPod mini's carry a hard drive in them and as with any hard drives, dropping it could make it crash. That's bad news for your mini, as it seems that the disk has been damaged. See if you can restore your mini. If it doesn't work, and if it is still under warranty, try exchanging the mini for a new one.

Similar Messages

  • My 5th generation 30gb ipod won't play for more than an hour...

    my 5th generation 30gb video ipod will not play for more than an hour or two.. can you help??please??

    Keep iPhone on Wall Charger and Reset, hold both Home and Power buttons until the iPhone begins to start. This can take 20 seconds of holding both buttons while on charger.

  • Macbook Pro Airport won't connect for more than a few seconds on battery

    My Macbook Pro will not stay connected to my work Wifi lan running on cisco AP1213G. It connects for a few seconds then drops the connecion whenever it's on battery power. On mains power it connects after saying there was an error but will occasionally not pass any trafic
    SSID is hidden, network uses WPA.
    AirPort Card Information:
    Wireless Card Type: AirPort Extreme (0x168C, 0x86)
    Wireless Card Locale: Worldwide
    Wireless Card Firmware Version: 0.1.24
    Current Wireless Network: lonschap01-lan
    Wireless Channel: 5
    Any ideas?
    Rob
    Macbook Pro   Mac OS X (10.4.7)   2Gb Ram, 100Mb HD 2Gz Core Duo.

    Certain settings, e.g. printer sharing, can prevent sleep. There are other possibilities as well. See this kbase article:
    http://support.apple.com/kb/HT1776

  • My WiFi won't stay connected for longer than 5 minutes!

    My problem is that my connection is okay for roughly 5 minutes and then the connection just disappears for no reason whilst Airport is still showing as connected. If I run Network Diagnostics it tells me that I have a working connection and to check if I typed the address correctly. If I then turn Airport off and then on again I will get the connection back for the same amount of time until it goes again.
    And to add to the annoyance of this problem is that tomorrow my connection might be absolutely fine. But then 5 days later, out of the blue the problem can start up again. There is no consistency to this issue, its very unpredictable and a huge pain in the ***.
    Any ideas? I have looked at similar solutions on this website and in regards to IP address and other things that have been mentioned I am set up correctly. I have had this problem before and it was easy to fix just by resetting the Airport box manually and then creating a new wireless network and reconnecting. But I have tried that many times now and the problem still persists. Also, all phones and the 2 other computers in my house (one iMac purchased last year and a PC) do not have this problem. This is an older iMac running OS X version 10.4.11.
    Any solutions would be greatly appreciated!

    The problem is still persisting intermittently. Its incredibly annoying as the connection has been fine for a couple of weeks now, but today I get home from work and it's happening again. Unfortunately your solution did not work so I have included screenshots of the Airport and TCP/IP tabs of my network preferences if that helps.
    The screenshots below will appear when I click "configure", I don't have an "advanced" button or a DNS tab by the looks of it.

  • HT3258 My Microsoft word, excel,and power point is no longer supported!  What the heck!  Help!

    After installing Mountain Lion, my mocrosoft word, excel, and power point programs are no longer supported or accessable.  Help!

    Upgrade to Office 2008 or better, or switch to a product such as OpenOffice.
    (69121)

  • After installing the 8.1 update the Internet Sharing won't allow any devices to stay connected for more than a few hours.

    Internet sharing is turned "on" and appears to be working, but really isn't. Locking the screen, restarting, or a hard reboot helps, but it is extremely aggravating not to be able to maintain a connection for more than a few hours at a time!

        Thank you so much for the info! I apologize for having asked for your device model as that is the forum you posted to. Also, I know that we've set the expectation that the device will remain connected as long as a demand for signal flows through it, but that may not be entirely the case. After a period of constant use, any device (including the Lumia 822) may require or force itself to stop.
    You've mentioned that the device will freeze after a few hours usage. Is the device also connected to the charger while being used as a hotspot? If so, do you notice the device getting warmer than it normally would be?
    DionM_VZW
    Follow us on Twitter www.twitter.com/vzwsupport

  • TS1702 App won't stay open for long than few seconds

    Some apps won't stay open for longer than few seconds, does anyone know how to correct this problem

    power off phone and power back on
    reset phone
    air plane mode off and on
    clear out multi tasking ( double tap home button and hold down a app tell it shakes and hit the minus sign)
    reset network setting

  • IPod won't connect more than once

    When I plug my iPod into my computer, my iTunes registers and connects and syncs. Perfectly fine. But I want to change some settings on my iPod, such as the album artwork and playlists, and whenever I try to sync it again, my iPod won't connect and my iTunes can't find it, even though its plugged in.
    Help?

    Typically when only one device can connect to the AirPort base station, it may be because it is not properly configured as a NAT router ... which is its default configuration.
    One option is to perform a "factory default" reset on the AirPort, and then, try connecting one or more devices to verify that they now all get network/Internet access. Once verified, you can use the AirPort Utility to configure it per your networking requirements.

  • Ipod won't connect? can't register it either

    I just got an ipod nano 3rd gen. today. I downloaded the latest version of itunes, just like the directions said. The songs went to itunes without any problems. The problem is: the ipod screen says connected, eject before disconnecting. The little battery at the top doesn't look like it's charging. It's just white/light gray with a little black plug thing in the center of it.
    When I plug the ipod in, it automatically opens itunes. But when you try to find a song on the ipod, it says no songs, no music, no files blah, blah, blah. When I click on the little ipod icon in the list on the left side of itunes, it gives me an option to register the ipod later. It looks like my monitor cuts off the right side of the screen, so I don't know if there's a register now option. I even hooked up another monitor, which is about 19 or 20 inches, I guess. It does the same thing. The right side of the screen is cut off. I can click on the ipod icon again, and see the license agreement. I clicked the box at the bottom and hit save. The thing is, part of that sentence saying that you agree to the terms, is cut off.
    All I see is:
    "I have read and agree to the iPod Software License Agr"
    I don't know what the rest of it says. And there is NO scroll bar at the bottom. I've tried shrinking the window and stretching it to the right, but it won't stretch. I don't know if the ipod won't work bc I can't register it or what. I even uninstalled itunes and re-installed it. Still does the same thing. I'm totally confused. ANY help would be appreciated.
    Thanks, Randi
    I'm also on yahoo messenger:
    randi127

    Resize the screen resolution to 1024 or larger (right click on desktop and pick Properties then go to the tab for screen resolution).
    Patrick

  • I´ve forgotten my passcode and my ipod won´t connect or appear in my PC

    I´ve forgotten my passcode and my ipod won´t connect or appear in my PC - any ideas?
    Thanks.

    Place the iPod in Recovery Mode and restore via iTunes.
    If not successful, try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    If iTunes still does not see the iPod see:
    iOS: Device not recognized in iTunes for Windows

  • IPod won't connect to wifi but the wifi is fine

    My computer's wifi is fine but both mine and my sisters iPods won't connect to the wifi. What's wrong with my iPod?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My iPod won't connect to my network.

    I have a recently purchased iPod Touch 5 generation, that was updated to iOS 8.2.
    It is failing to connect to my home network, and I cannot understand why.
    The MAC address was added onto my MAC address filter (I know some may say to turn it off but I can't, I'm not the network admin and they are stubborn as a mule when it comes to leaving the filter on. -_-), but it won't connect.
    Initially it just said it was failing to connect, so I assumed an error was made in entering the MAC address to the filter, but the address matched.
    Now it is saying 'incorrect password' even though the password is valid (I checked it at least three times before entering it).
    It connects to my mobile phone's hotspot just fine if I turn it on, but that isn't a viable solution due to data restrictions.
    I am at a loss as to why it won't connect to my Wi-Fi.

    Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network.
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before?
    Try the following to rule out a software problem:                
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • My iPod won't connect to my Mac... Help?

    My iPod won't connect with my Mac anymore.
    It connected last time I tried it (four months ago, about). It's a Gen Two or Three (I don't know the difference, sorry) and I haven't changed anything about my Mac since then, or my iTunes.
    If you can help at all, please reply. And don't hesitate to ask for more info.
    EDIT: Oh, and I've tried resetting the iPod, putting it in Disk Mode, using a different USB port and restarting the computer (several times).
    The iPod says "Do Not Disconnect" and the iPod symbol appears on Finder and I am able to access it, but it won't appear in iTunes.
    Message was edited by: Hortaux

    I was having the same problem--no iPod on Desktop, no iPod in iTunes. This fixed it for me, at least:
    1. Open Applications > Utilities > Disk Utility. (My iPod DID show up here, though it wasn't mounted.)
    2. Select the iPod in the disk list on the left.
    3. Click "Verify Disk." (In my case, this revealed an underlying error.)
    4. Click "Repair Disk." (If this works, great--stop here. It didn't work for me...)
    5. Click the "Erase" tab at the top of the right-hand main pane.
    6. Choose Mac OS Extended (Journaled) for Volume Format.
    7. Click "Erase" button at bottom right.
    Almost immediately, my iPod showed up on my Desktop, iTunes launched, and it was as though I had completed a Restore of the iPod.
    Hope that helps....
    David

  • 2nd generation ipod won't connect to the internet, and i've never had a problem with it before.

    My ipod won't connect to the wi-fi but our computer will.

    - Reset the iPod. Nothing wil be lost
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset neteworks settings: Settings>General>Rest>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • 40GB Ipod Won't Connect...?

    My 40GB iPod won't connect to the computer when i plug it in. The display comes up with "Do Not Disconnect", but iTunes won't open or anything. It just stays like that.
    I've tried connecting to another USB port, restarting the computer and iPod, but nothing seems to work.

    The only time I use a USB is for my nano because it's not supported by a firewire; otherwise, I'm not a big fan of USB's and use the firewire for my other pod. Have you tried a firewire?
    http://docs.info.apple.com/article.html?artnum=93405
    http://docs.info.apple.com/article.html?artnum=32491

Maybe you are looking for

  • It is no longer possible to use ALT + N and ALT + P from the "get info" window.

    On a PC, previously, when in the "get info" windows, it was possible to use ALT + N and ALT + P to switch to the song information for the next and previous song.  Since the update to the newest iTunes, it's no longer possible.  Has anybody found a ke

  • WSPUBLISH not working after patching Discovery V2 system to SPS 15

    All, We have a eSOA Discovery (V2) system that we recently patched to SPS 15.  As you all probably know with SPS 14 SAP deployed a new SOAP runtime engine and obsoleted the use of WSCONFIG. I have followed all the installation, post installation, and

  • Reader X won't open

    Installed Reader X on Vista Business and sometimes can't open a pdf file from my browser IE (7). Sometimes freezes browser and have to use Task Manager to close. Some times if I open Acrobat 8 and just leave it open this helps, sometimes it doesn't.

  • Problems reading in with gui_upload

    Dear forum members, when I try to read in the text file with the FM gui_upload it doesn`t do exactly what I want!? My code is as follows: CALL FUNCTION 'GUI_UPLOAD'   EXPORTING     filetype = 'ASC'    filename = 'C:\Dokumente und Einstellungen\Sabani

  • Global Volume Slider (from library) to control drag and drop xml playlist

    hi there, have spent some time doing tutorial and looking online but can't seem to get a volume slider functioning. the scenario is : 3 circles which can be dragged over a target (one for each circle) When the circle is placed on its target it loads