IpodT auto redirects to the power off (slide) option while in use. Then while not using it, it will not power off to conserve the battery. I have to enable the assistive touch to save battery life. Software is up to date with 6.1.6. PLEASE HELP!

version 6.1.6(10B500); model#MC547LL/A; 60GB (40 used/20 avail)
IpodT auto redirects to the power off (slide) option while in use. Then while not using it, it will not power off to conserve the battery. I have to enable the assistive touch to save battery life. Software states up to date with iOS 6.1.6. PLEASE HELP!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

I need to install the find my iPhone app on my ipad, it's won't install. Any reasons. Do I need to change something in my settings? I am up to date with my ios7. Please help!

I need to install the find my iPhone app on my ipad, it will not install. Any reasons. Do I need to change something in my settings? I am up to date with my ios7. Please help!

Try closing the App Store app via the iPad's taskbar and then do a soft-reset and see if you can install it after the iPad has restarted. To close the App Store : double-click the home button to open the taskbar, and then swipe or drag the App Store app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Read the fixes and still having problems. Firefox will not open at all and I receive a crash report upon launch. Have restarted, shut down, run virus and malware checks and even tried downloading and reinstalling with no response. Please assist.

Read the fixes. Cannot open Firefox in safe mode. Have tried reinstalling Firefox. Crash occurs each time I try to launch Firefox. Have run scans, checked for malware, spyware, installed all windows updates and still no luck.
Have accessed my crash reports. One of the reasons indicated is:
GenuineIntel family 6 model 23 stepping 10
Crash Reason
EXCEPTION_ACCESS_VIOLATION_WRITE
Have no idea how to fix this and have had crash reports since yesterday evening.
Signature: nsStandardURL::SchemeIs(char const*, int*)

Sorry believe something got miscommunicated. Wasn't trying to qualify firefox as malware - was terming it that way because the malware was crashing Firefox and no other issue. Worked on it and had isolated the virus in avast (put it in the chest) and was searching for assistance on why even after isolating the virus and restarting (some forums had indicated to then uninstall and reinstall Firefox, which I did), still would not launch without the crash report.
Worked the problem and eventually installed a 5.0 version of Firefox and it launches. Only seems to have the crash report with 6.0 or higher.
The forums had suggested that if after isolating the malware in avast or disinfecting it with MBAM (tried that too), to uninstall and then reinstall the latest version of firefox. That's when I tried the older versions. Had run a boot log scan as well and didn't see any additional problems. Just can't launch in 6.0 or higher.

I am making my first keynote presentation. I transferred the slides from a power point. I did not use a 'theme' from keynote. Keynote will not let me 'name' the presentation and the 'save as' option will not come up in the menu. What have I done wrong

I am making my first keynote presentation. I transferred the slides from a power point. I did not use a 'theme' from keynote. Keynote will not let me 'name' the presentation and the 'save as' option will not come up in the menu. What have I done wrong

When it comes to Keynote, I try and start with a presentation that's 1680 x 1050 preset or something in that range. Most projectors that you'll get at a conference won't project much higher than that and if they run at a lower resolution, it's better to have the device downsize your Keynote. Anything is better than having the projector try and upsize your presentation... you work hard to make it look good, and it's mangled by some tired Epson projector.
As far as slides go, scan them in at 150 dpi or better, and make them at least the dimensions of your presentation. Keynote is really only wanting 72dpi, but I do them at 150, just in case I need to print out the presentation as a handout later, and having the pix at 150 dpi gives me a little help with their quality on a printer.
You'd probably have to drop in the 150 versions again if you output the Keynote to .pdf or Word or something, but at least you have the option.
And Gary's right (above) go ahead and scan them as TIFFs. Sooner or later you'll want to do something else with these slides (like make something for an iPad or the like) and having them as TIFFs keeps your presentation looking good.
Finally, and this is a big one, get to the location for your presentation ahead of time if you can, and plug the laptop in and see what you get. There's always connection problems. Don't let the AV bonehead tell you everything will work just fine ('... I don't have any adapters for a Mac...') . See it for yourself... you're the one that's standing up there. Unless it's your boss, then you better be really sure it works.

Hi, I'm having a problem with my first gen. iPad switching back to the apps page by itself. This started after upgrading to ios5. It will do this from safari or kindle. I have turned it off manually as suggested by a tech rep. without any improvement.

Hi,
My 1stgen iPad keeps. Switching back to the apps. Pages by itself after installing ios5. I have shut it down manually as suggestedby a tech rep but the problem still exists.
Thanks, Jim

1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

Please help block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!

please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!. thanks

Place the iPOd in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore

My iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black

my iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black. can anyone help me please??

christobell86 wrote:
... it will not restore my phone as i have got the app find my iphone switched on.
You can access iCloud.com on a computer to turn it off.
http://support.apple.com/kb/PH2702

HT4199 I just got a new iPod touch 4th generation and I'm trying to connect to my router and my iPod says, 'Cannont find network.' I don't know what to do! No other networks come up on the list so I can't 'tag' along with thier wifi. Please help. I need a

I just got a new iPod touch 4th generation and I'm trying to connect to my router and my iPod says, 'Cannont find network.' I don't know what to do! No other networks come up on the list so I can't 'tag' along with thier wifi. Please help. I need advice.

What type network is yu router set up for? The 4G iPod can only connect and see 2.4 GHZ networl like B, G and the 2,4 GHz N. There is also a 5 GHz N but the iPod will not even seethat network.
See:
iOS: Troubleshooting Wi-Fi networks and connections
iOS: Recommended settings for Wi-Fi routers and access points

Tried to upgrade to osx 10.9 from 10.7 and I didn't notice that it downloads in the launcher. I turned my mac off and ever since then it has glitched out and will not download no matter what I do. I have had it for 3 years which is out of warranty.

Tried to upgrade to osx 10.9 from 10.7 and I didn't notice that it downloads in the launcher. I turned my mac off and ever since then it has glitched out and will not download no matter what I do. I have had it for 3 years which is out of warranty. It now has a blank bar under the launch pad and no matter how many times I try re-downloading it or restarting my computer it does not work. I use too play starcraft and other games on this computer although new patched/updates have made it that I can no longer do that now. Really frustrating having to deal with this especially after buying this computer upfront and now out of warranty.

Go to your Applications folder and find a file called "Install OS X Mavericks". Send it to the trash and delete it. Then try the download again.

The lock button on my Phone 5 has stopped working completely. It just will not work anymore so I have to rely on the auto-lock . Will apple replace me phone?

I have an Iphone 5 on contract with T-mobile/EE. The lock button on my Phone 5 has stopped working completely. It just will not work anymore so I have to rely on the auto-lock . Will apple replace my phone or do I ahve to take it back to T-mobile? It is just short of a year into a 24 month contract.

Yes; If it's under the one year hard ware warrnety and it doesn't have any damage on the device you can get it replaced, contact Apple ASAP

My ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything

my ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything

Get it fixed then, make an appointment with the Apple genius bar.

I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!

I lost my iPhone 5S battery percentage after I upgrade the system to the newest one. I do turn on the percentage in battery usage, but it doesn't work. I also tried to restart my phone but nothing changed. Could somebody please help me? Thank you!

You did turned in Settings > General > Usage > Battery Percentage: ON?
Try a
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data

My ipod touch 4g will not connect to tv, will not display picture. keep getting a message saying this accessory is not supported by ipod touch, what do ido to make this work and get rid of the message i keep getting?

My ipod touch 4g 5.0.1 will not connect to tv, will not display picture. Also keep getting a message sayin this accesory is not supported with ipod touch. How do i get this to work and stop getting this message? Please help.

- What cable re you using? Digitasl, VGA, composit, componet and who made it?
- TV out only works with apps that support it. It does not morror the iPod's screen
- Have tired another TV or other display?

TS1702 Just got the Iphone 4s in June, now everytime I go to download an app, it will not download. When I go to get updates, the apps will not download. I tried, reinstalling, resyncing, turning the phone off and on, what is happening? How do I fix thi

Just got the Iphone 4s in June, now everytime I go to download an app, it will not download. When I go to get updates, the apps will not download. I tried, reinstalling, resyncing, turning the phone off and on, what is happening? How do I fix this?

Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

Photoshop Elements 13...downloaded software...when I click on the icon the program opens to a choice of organizing or editing photos. Editing photos will not open...the bar above just spins. Why is that?

Photoshop Elements 13...down loaded software...when I click on the icon the program opens to a choice of organizing or editing photos. Editing photos will not open...the bar above just spins. Why is that?

Hello flarogue7
This issue means there is certain issue with your HOSTS file.
Just navigate to C:\Windows\System32\drivers\etc on your computer, rename the HOSTS file and try to install. It will install.

IpodT auto redirects to the power off (slide) option while in use. Then while not using it, it will not power off to conserve the battery. I have to enable the assistive touch to save battery life. Software is up to date with 6.1.6. PLEASE HELP!

Similar Messages

Maybe you are looking for