Is a 3TB hard drive supported on 2009 Airport extreme?

I have a late 2009 Airport extreme and I recently connected my 3TB WD GReen HD to it and I am experiencing problems. It says that its in need of repair but when i connect it to my mac there isnt any issues, Please advise me on the best thing to do.

Quite often restarting is very useful for reextablishing a connection...each component, if you shut all down then startup sequentially, gets a new starting IP address and then is ready to farm out the DHCP addresses to the subsequent components.
Glad it is working for you now.

Similar Messages

I already have a hard drive connected to my airport extreme, and ws wondering if i could use it as a network storage device

I already have a hard drive connected to my airport extreme, and ws wondering if i could use it as a network storage device. If so would I have to format it with two partitions , one for time machine and the other for network storage. Aprreciate any advice

If you have the hard drive connected to the AirPort Extreme....it is a network storage device.
One issue that you may want to think about is that Apple does not support Time Machine backups to a hard drive at the USB port at the AirPort Extreme.
In spite of this, some users who try this are able to make it work. Others have some limited success and some have no success.
It's not supported....so there will be no help from Apple in the event of problems.
If you decide to proceed with this, make sure that the partition for Time Machine backups is formatted in Mac OS Extended (Journaled) as other formats will not work with Time Machine.
Having a secondary backup plan would also be something that you might want to consider.

HT201250 Time machine back up using a external hard drive connected to the Airport extreme

How can I setup a time machine back up using a external hard drive connected to the Airport extreme? Even better for time managment purposes I want to use the Eithernet Thunderbolt connection for the first back up and then through the wifi there after for daily routine Time Machine back ups.

You can attach a hard drive, but Time Machine backups to a drive at the USB port at the AirPort Extreme are not supported by Apple, so it's not possible to say what your actual results might be.
If you decide to try this, it would be wise to have a secondary backup plan in place as well.
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html

How do I use time machine to backup to an external hard drive plugged into my airport extreme

How do I use time machine to backup to an external hard drive plugged into my airport extreme? I used to be able to but now time machine will not recognize my hard drive to select as a backup when plugged into my airport extreme. I'm not sure what happened or changed. Any help is greatly appreciated. Thanks

First thing to do is go to the Pondini tips page, then follow the link to his full TM site for all the details.

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware

External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware on Extreme as well as both of my Airport Expresses. Hard drive is USB connected to Extreme.

Reboot the USB drive.. assuming it is powered.. or unplug and replug a self-powered drive.. (you should not use self-powered drives on AE before the latest model.. always use a powered hub).
Does the drive now appear in finder..
If not reboot both drive and the AE.. it should now appear.
If it doesn't work with direct connection try a powered hub.. that can help.

HT201250 Can I use Time Machine to backup a LaCie Hard Drive connected to an Airport Extreme onto a My Book that is connected directly to a Mac Mini?

I have a LaCie 2TB hard drive connected to a Airport Extreme Base Station. I also have a 1TB MyBook connected to a Mac Mini. My question is can you backup selected files (photos) from the LaCie drive to the MyBook drive using Time Machine, or any other software? If it will cost a fortune, I guess I can always just copy the newer files over.

Thank you for such a lightning-fast response Niel :-) Can I just double check with you the following ...?
The external drive where my iPhoto library is located has three partitions - Time Machine Backup, Pictures (where the iPhoto library is located) and SuperDuper Bootable Clone.
When you say 'Remove the external drive from the list of items set to be excluded from the backup, and then add everything else on it' - am I correct in thinking that I should remove Pictures partition from the items to be excluded but leave the Time Machine Backup and SuperDuper Bootable Clone as excluded items?
On my 2TB external drive (the one I'm backing up to) there are 5 partitions - Time Machine Backup, SuperDuper Clone, Pictures, Photo Archive and Document Archive. The Time Machine Backup is 700GB of which I still have 473GB available - when I include the Pictures folder that contains the iPhoto library that will use up another 148GB but I think there's still plenty of room to use it.
When you say if the partition contain the iPhoto library isn't dedicated to it it may be easier to create one which is, the only item I have on the Pictures volume is the iPhoto library so I think that it's dedicated to it. I was going to add images from the Pictures folder on my MacBook Pro but haven't done so at this stage so I won't do so. It wouldn't matter though, would it, if I copied the images from the Pictures folder on my MBP to the 'Photo Archive' partition of the EHD?
Thank you once more for your reply.
Tricia

Make a hard drive attached to the Airport Extreme work with Time Capsule?

I have an external hard drive attached to my airport extreme that shows up on my desktop as if it was attached locally, but time machine recognizes it as the wrong format. In the Get Info screen, the drive's format appears to be 'Appleshare', when it is actually Mac OS Extended (Journaled). How can I make it appear as Mac OS extended again?

There is nothing wrong. The drive will appear as Appleshare since the AirPort Extreme base station (AEBS) is providing file sharing services. That should not be a problem for Time Machine use.

Saving files to a hard drive connected to my Airport Extreme

I just upgraded to Leopard. I am unable to use Backup v 3.1.2 to save files to a hard drive i have connected to my Airport Extreme. Previously, using Tiger i was able to perform this task.
I use Finder and see my airport express network and my external hard drive. However, when i run my backup jobs using Backup the program can not located the external hard drives.

The discussion was helpful. My hard drive connected to my Airport Extreme is now recognized and i can backup files to a folder called 'Backups'. However, i am only capable of saving to this one folder. When i try to create subfolders and select one of them as my location in the Backup program i get an error message; "the selected location is not a valid destination". Any idea how to get around this problem?
Many thanks for the quick response to my previous mail.

How to move external hard drive (time machine) off airport extreme network?

For several years now, I've had an external hard drive connected to my airport extreme and it's servered as an awesome external back-up of my Macbook via Time Machine. However, now I've had to remove the external hard drive from my network (that's a whole other story). Anyway, when I connect the external hard drive to my MacBook, it doesn't recongize it as my Time Machine back-up. It is still looking for "My Book" on my network, which obviously doesn't exist anymore. Can I simply re-direct it to "my book" that is now connected via USB to my computer? Do I have to start over? If possible, I'd like to keep the back-ups I already had and simply continue with my new back-ups. Please advise! Thanks!

First thing to do is go to the Pondini tips page, then follow the link to his full TM site for all the details.

How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?

How do I access an external hard drive attached to an Airport Extreme using the Finder's "Go to the folder" feature?
I have an external hard drive attached to my Airport Extreme and I can access it just fine through Finder. I would like to be able to keyboard navigate to it in an efficient manner. I tried to use the "Go to the folder" feature but was unable to.
I had tried dragging the drive to the Network folder but the shortcut it created does not lead to the drive's contents...it seems to lead right back to the parent directory:
I hope I explained the question well. Thank you for all of your help and time in tending to my inquiry.

Cant you set up "back to my mac" then go to finder preferences and put a check mark under everything under the shared location. Also set up back to my mac on your airport extreme.

Why can't I connect to my external hard drive anymore through my AirPort extreme?

I have a WD 500 GB external hard drive connected to my AirPort extreme that I have been using just fine for some time now. All of a sudden, I cannot access the files on the hard drive and when I try to connect to my AirPort in finder, the connection fails. What can I do to fix this?

If I restart my Mac it notices them
This is puzzling. You should not have to restart your Mac for drives to mount.
Also I plugged the hard drive directly into my Mac and had to restart it before it noticed it
Same as above. You should not have to restart the Mac for the drive to be recognized.
Connect the drive directly to the Mac and restart the Mac if necessary to mount the drive. Then run Verify Disk using Disk Utility on the Mac. If repairs are needed, run Repair Disk. Locate Disk Utility as follows:
Macintosh HD > Applications > Utilities > Disk Utility
See if the drive is recognized at the AirPort Extreme. Post on your results.

Hard Drive not showing in Airport Extreme

i am using windows 7 ultimate 64 bit operating system
I have the hard drive showing in the Airport Utility but can't access the files
Now i have tried all of this from the apple website with no luck, am i missing something here i have read that it only supports fat32 operating systems which the hard drive is but struggling to connect to it.
Any advice is appreciated
Automatically mounting hard disks
From the main window of AirPort Disk Utility enable "Show AirPort Disks in the menu bar".
Enter the username and password required to access the AirPort Disk(s).
Manually mounting hard disks using the AirPort Disk menu bar item
Click the AirPort Disk menu bar icon () and select the Base Station with desired USB hard drive.
Select the desired hard disk(s) (AirPort Disk).
Enter the username and password required to access the AirPort Disk(s).
Manually mounting Mac OS Extended (HFS+) volumes
From the Finder's Go menu choose Connect to Server.
Enter the AirPort Extreme Base Station's LAN IP address (by default 10.0.1.1).
Enter the username and password required to access the AirPort Disk(s).
Select the desired AirPort Disk(s) from the available Volumes.
Manually mounting FAT16/FAT32 volumes
From the Finder's Go menu choose Connect to Server.
Enter the AirPort Extreme Base Station's LAN IP address preceded by smb:// (for example, smb://10.0.1.1 )
Enter the username and password required to access the AirPort Disk(s). Leave the Workgroup field empty unless you have assigned one in AirPort Utility.
Select the desired AirPort Disk from the available CIFS (Common Internet File System) volumes

You can usually enter anything you want for the user name, but the password will need to be the device password for the AirPort Extreme....(not the wireless network password).

SERIOUSLY slow USB hard drive on the new Airport Extreme 802.11n

I have recently bought the new airport etreme 802.11n. Great little device, look wonderful on the office desk. I had some troubles getting it up and running on my machine but finaly got there in the end.
The USB hard drive is a great little addition that I was very excited about, untill I got it running. It is amazingly slow, for example I tried to copy a folder that contained 15 files which amounted to 135.6mb and it took 20 mins and 24 seconds to upload!
Is this just the speed that it should be uploading or is there somehting wrong with my settings.
I'm running on 3 bars of signal and the settings I'm using are:
connect with password (which is the same as the base stations password)
Automatically discover disks
Show in menu bar
If anyone knows the technical data for the transfer speeds and can confirm my queries I'd really appreciate it!
Thanks in advance

I have recently bought the new airport etreme
802.11n. Great little device, look wonderful on the
office desk. I had some troubles getting it up and
running on my machine but finaly got there in the
end.
The USB hard drive is a great little addition that I
was very excited about, untill I got it running. It
is amazingly slow, for example I tried to copy a
folder that contained 15 files which amounted to
135.6mb and it took 20 mins and 24 seconds to
upload!
Is this just the speed that it should be uploading or
is there somehting wrong with my settings.
I'm running on 3 bars of signal and the settings I'm
using are:
connect with password (which is the same as the base
stations password)
Automatically discover disks
Show in menu bar
If anyone knows the technical data for the transfer
speeds and can confirm my queries I'd really
appreciate it!
Thanks in advance
Does your drive meet these requirements?:
You can connect USB-based storage devices to an AirPort Extreme (802.11n). Learn which formats and protocols are supported.
The AirPort Extreme (802.11n) supports USB storage devices that have a block size of 512 bytes, and are formatted as Mac OS Extended (HFS-plus), FAT16, or FAT32. Not all USB storage devices use a block size of 512 bytes.
The AirPort Extreme (802.11n) shares storage devices based on the format used to initialize the storage device. For example, if HFS-plus formatting was used, AFP and SMB/CIFS protocols are used to share the device on the network. If FAT16 or FAT32 was used, SMB/CIFS protocols are used.
The AirPort Extreme (802.11n) works with disks that have a single partition and are not RAID volumes (no more than one volume per physical disk).
Note: Use AirPort Disk Utility to discover and mount AirPort Extreme-based volumes over the network.
William

Can you share a hard drive with the current airport extreme

Hey all!
I read that you can share USB drives with the new airport extreme. Can you do that with the current ones?
Thanks,
B

Massi65, Welcome to the discussion area!
You really should start a new thread since your question is about the new square AEBS and the thread started with a question about the previous AEBS.
With either AEBS you could wirelessly gain access to a hard drive by one of these 3 methods:
Use a hard drive with wireless networking capabilities. The drive would connect to the wireless network like any other wireless client.
Use a hard drive with an Ethernet interface. Connect the drive to the AEBS's LAN port.
Connect a hard drive via FireWire or USB to another Mac and then share the drive from that Mac.
The new square AEBS offers a new possibility. You can connect a USB drive directly to the new AEBS and share it to devices connected to the AEBS's network.
What performance could I expect?
No one can answer this directly since no one has any of these devices to try.

I can not access the hard drive connected to my airport extreme! Any thoughts?

I can not access the hard drive connected to my ariport extreme. When I use the finder to connect a server and type in the IP of the a. extreme, 10.0.1.1 it does not work and I get an error message.
Any thoughts.
A

Is the hard drive formatted for Mac in Mac OS Extended (Journaled)?
If yes, you may need to use a powered USB hub since the USB port on the AirPort Extreme is under powered and it is often necessary to use a powered hub....even if the hard drive has its own power supply
If both items check out above.....have you checked Finder Preferences to make sure that "Connected Servers" will be displayed?
Finder Preferences > General > Show These Items on the Desktop > Connected Servers
Then with the Finder menus displayed at the top of the screen click the Go menu
Click Network and the AirPort Extreme icon should be displayed
Double click the icon to mount the drive on the desktop

Is a 3TB hard drive supported on 2009 Airport extreme?

Similar Messages

Maybe you are looking for