Is a DSN (ODBC-derived) accessible from the Eclipse Java SDK?

I'm in the process of evaluating alternatives for implementing a (seemingly) straight forward Crystal report in the Eclipse environment. I can access a report (.rpt) that uses JDBC data source connection, but not DSN (ODBC) data source connection. Is it possible to access a report from the Java interface that has a DSN data source? (the objects in my program want to access the data source as a JNDI)
Thanks,
Roger

Hi there,
From My Experience you batter use older version of Eclipse - Helios:
Eclipse IDE for Java EE Developers | Packages
developers/heliossr2
Good Lack

Similar Messages

Admin Console should not be accessible from the Internet

Hi!
I am using WebLogic 6.1 and by default the Admin Console runs under the same port
like the deployed web applications. As a matter of fact, the Admin Console can
been seen from the Internet! :(
Is there a way to start the Admin Console with another port? Or is there any other
solution that the Admin Console is only accessible from the Intranet but not from
the Internet??
I couldn't find anything in the documentation related to this topic.
Thanks in advance.
Markus Richter

One solution I use is to place an Apache WebServer in front of the BEA HTTP server and use the Apache/WebLogic module to proxy requests.
Apache is much more configurable, robust etc etc as a webserver. If you configure a specific Apache Virtual Server for connections to your Weblogic server you can use Apache ACL's to control access to the console via specific IP addresses only.
The ACL in the Apache Virtual Server configuration could like something like this.
<Location /console/>
order deny,allow
deny from all
allow from 10.0.0.1
</Location>
hope this helps.
Mark P

Oracle VM 3 - only one virtual host accessible from the network (DELL R410)

Hi,
I have installed Oracle VM 3.0.3 and created the network for Virtual hosts. After installing two systems on the server only one is accessible from the network at a time. The second one is not.
Have no idea how e to enable the second host to reach a network.
Maby You have some idea?
Thanks,
Jarek

Hello!!
I'm not an expert but /OVS/Pool should be the directory naming of OVM 2.x, replaced by /OVS/Repositories/REPOS_ID in OVM 3.x
The "wierd directory name" it's the unique ID that OVM assigns to Repository, infact if you go to VM Manager in Repository tab and edit your current repository you will see this ID: 0004fb0000030000839f2d2faa5014c3
Under "0004fb0000030000839f2d2faa5014c3" folder, as you noticed, there are the classic folders ISO, VirtualDisk, VirtualMachine, etc. where files are placed.
I've never tried to import a pre-packaged template from Oracle but I would try importing it as an assembly from http/ftp! ;)
Hope this helps.
Greets!

Security Issue: How to create a derived role from the Base role

Hi All,
Kindly let me know how can i create a derived role from the base role?
Please respond at the earliest.
Thanks in advance.
Ramesh.

Go to PFCG and Create a role with desired Name.
In the Description Tab, on the Left Side there is a text box for "Derive From "
enter the Base role.
Now your newly created role is derived from the Base role.
Save the newly created role and again run PFCG, enter the Base role name and execute.Select Edit role. Go to Authorization tab.
Edit Authorization.
In the Menu Adjust Derived -> Generate and Adjust derive
This will Generate the derived role.
Now you may go and check the authorization in the derived role.

My bookmarks used to appear in dropdown menu from the address bar on my iMac G5. I switched to Mac Notebook & from Leopard to Lion. Now my bookmarks are not accessible from the address bar anymore (the line where you type in the website address)

'''My bookmarks used to appear in dropdown menu from the address bar on my iMac G5. I switched to Mac Notebook & from Leopard to Lion. Now my bookmarks are not accessible from the address bar anymore (the line where you type in the website address)'''

There appears to be a problem with Firefox 20 with UNC paths when using roaming profiles on a server.
*[[/questions/955140]] why is the 20.0 address bar unresponsive?
This is currently investigated and tracked via this bug report.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=857672 bug 857672] - Address Bar not working (roaming profiles;UNC path support OS.File)
(please do not comment in bug reports: [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html])

Design Studio 1.4 SDK: Issues when launching from the Eclipse IDE

Hi,
I am receiving various errors when launching Design Studio 1.4 from the Eclipse IDE for SDK development. All of the components appear in the Component panel as expected but I can't drag and drop any of the SDK components (or standard components for that matter) onto the canvas. When I launch Design Studio 1.4 independently of Eclipse everything works fine (event though I still see come errors in the Console).
I'm hoping the community can provide some guidance to help resolve the issue. The details are documented below:
Environment:
Design Studio Version: Release 1.4 SP0 Patch 1 (64-bit)
Eclipse Version: Java EE IDE Luna Service Release 1a (4.4.1) - 64-bit
Java Run-time Environment: Version 8 Update 25 (64-bit)
Operating System: Windows 7 64-bit
Eclipse Configuration for DS SDK:
Target Location:
Target Environment:
Target Run Configuration (Main):
Target Run Configuration (VM Arguments as per DS SDK Developer Guide):
Steps to Reproduce Error
1. Launch Eclipse
2. Launch DS 1.4 from Run command in Eclipse
The following screen appears immediately after launching DS from Eclipse:
At this point the DS error log is as per the attached DS_Log_After_Eclipse_Launch.txt file.
3. Create a new blank Application from the Application -> New menu. This time additional error messages appear as shown in the screenshot below:
It's not possible to drop any standard or SDK components onto the canvas because the internal browser doesn't appear to have been instantiated due to the above errors.
At this point the DS error log is as per the attached DS_Log_After_Eclipse_LaunchAndAppCreate.txt file.
3. Return to Eclipse IDE
The Eclipse Console displays the following errors:
The Eclipse Console Log is as per the attached EclipseConsoleLog.txt file.
4. Launch DS 1.4 Independently
The following errors also appear when I launch DS 1.4 independently of Eclipse but it in this case everything seems to work fine.
Any assistance would be greatly appreciated.
Thanks,
Mustafa.

Hi there,
From My Experience you batter use older version of Eclipse - Helios:
Eclipse IDE for Java EE Developers | Packages
developers/heliossr2
Good Lack

Problem with HowTo guide - Use the BI Java SDK in a Web Dynpro Application

Hello,
I am following the HowTo guide - Use the BI Java SDK in a Web Dynpro Application
at <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e49be590-0201-0010-0c83-fc20e5da124f">this link</a>.
I have configured the connector on the WAS as needed.
The problem is that when I run the application I receive an Unauthorized error on the connector URL.
If I open this URL on a browser I receive a pop-up for UID and PWD and when I enter the same UID and PWD I used to configure the connector I am able to login and see the WSDL.
Any ideas?

I've never tried using BI in WebDynpro !!!
But i foond one posting on the connection problem https://forums.sdn.sap.com/click.jspa?searchID=955524&messageID=2133396
Regards,Anilkumar

Site not accessible from the Load balanced web front end server - sharepoint 2010

I have a production environment with 2 WFE's(sp-wfe1 & sp-wfe2), 2 APP's and 2 SQL clustered VM's.
2 WFE's are load balanced using hardware load balancer.
An A-Record(PORTAL) is created in DNS for the virtual IP of the load balancer which points to the 2 WFE's.
A web application is created on the WFE's on port 80.
alternative access mapping is configured and the load balanced record "http://PORTAL" is used under the default zone.
Under IIS I have edited the bindings for the sharepoint site at port 80 and added the HOSTNAME as PORTAL.
Result: The site is accessible from outside the server and works fine.
ISSUE: The site is not accessible within the WFE's(sp-wfe1 & sp-wfe2).
When I browse the site from the WFE's server it ask for the credentials and when I enter the credentials and click OK it ask the credentials again and again and in the end displays a blank page.
Kindly help me in this issue because I am clueless and couldn't find anything helpful on the internet.
Regards,
Mudassar
MADDY-DEV Forum answers from Microsoft Forum

Loop back check.
http://www.harbar.net/archive/2009/07/02/disableloopbackcheck-amp-sharepoint-what-every-admin-and-developer-should-know.aspx

Should Welcome page be accessible from the web?

I have never really worried about this too much but what has everyone else done about removing the AMS welcome page from webroot? I had one of my team mention that they can browse to it from the web
Should we be concerned?

Hi stu_j_u,
Welcome page allows playback of some sample content out of the box. It should not be a concern. One can remove the index.html page and the associated assets from webroot, if desired.

Unable to call the RFC from the WD java Program

Hi All,
I have a table and three buttons Create, Edit, Save in the layout.
If no record available in the R3 the the end user will click on create and then he will click on save so that the insert RFC will be called accordingly and the record will be inserted.My table is limited to 5 records only. If i enter all the 5 records and Click on submit the record is inserting in the backend , but if i enter less than 5 records im unable to call the RFC what might be the issue.
My insert RFC takes one Table node and 4 import parameters i'm passing all of the all the mentioned import parameters.
Code:-
View Controller code
// This file has been generated partially by the Web Dynpro Code Generator.
// MODIFY CODE ONLY IN SECTIONS ENCLOSED BY @@begin AND @@end.
// ALL OTHER CHANGES WILL BE LOST IF THE FILE IS REGENERATED.
package com.gmr.ess;
// IMPORTANT NOTE:
// ALL IMPORT STATEMENTS MUST BE PLACED IN THE FOLLOWING SECTION ENCLOSED
// BY @@begin imports AND @@end. FURTHERMORE, THIS SECTION MUST ALWAYS CONTAIN
// AT LEAST ONE IMPORT STATEMENT (E.G. THAT FOR IPrivateAPPView).
// OTHERWISE, USING THE ECLIPSE FUNCTION "Organize Imports" FOLLOWED BY
// A WEB DYNPRO CODE GENERATION (E.G. PROJECT BUILD) WILL RESULT IN THE LOSS
// OF IMPORT STATEMENTS.
//@@begin imports
import java.math.BigDecimal;
import java.util.Date;
import java.text.DateFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
import java.util.ArrayList;
import java.util.Calendar;
import java.util.Collection;
import java.util.Iterator;
import com.gmr.ess.wdp.IPrivateAPPView;
import com.gmr.pck.Zst_Hr_Nominee;
import com.sap.tc.webdynpro.progmodel.api.IWDMessageManager;
import com.sap.tc.webdynpro.services.sal.um.api.IWDClientUser;
import com.sap.tc.webdynpro.services.sal.um.api.WDClientUser;
//@@end
//@@begin documentation
//@@end
public class APPView
Logging location.
private static final com.sap.tc.logging.Location logger =
 com.sap.tc.logging.Location.getLocation(APPView.class);
static
 //@@begin id
 String id = "$Id$";
 //@@end
 com.sap.tc.logging.Location.getLocation("ID.com.sap.tc.webdynpro").infoT(id);
Private access to the generated Web Dynpro counterpart
for this controller class. 
Use <code>wdThis</code> to gain typed access to the context,
to trigger navigation via outbound plugs, to get and enable/disable
actions, fire declared events, and access used controllers and/or
component usages.
@see com.gmr.ess.wdp.IPrivateAPPView for more details
private final IPrivateAPPView wdThis;
Root node of this controller's context. 
Provides typed access not only to the elements of the root node
but also to all nodes in the context (methods nodeXYZ())
and their currently selected element (methods currentXYZElement()).
It also facilitates the creation of new elements for all nodes
(methods createXYZElement()). 
@see com.gmr.ess.wdp.IPrivateAPPView.IContextNode for more details.
private final IPrivateAPPView.IContextNode wdContext;
A shortcut for <code>wdThis.wdGetAPI()</code>. 
Represents the generic API of the generic Web Dynpro counterpart
for this controller. 
private final com.sap.tc.webdynpro.progmodel.api.IWDViewController wdControllerAPI;
A shortcut for <code>wdThis.wdGetAPI().getComponent()</code>. 
Represents the generic API of the Web Dynpro component this controller
belongs to. Can be used to access the message manager, the window manager,
to add/remove event handlers and so on. 
private final com.sap.tc.webdynpro.progmodel.api.IWDComponent wdComponentAPI;
public APPView(IPrivateAPPView wdThis)
 this.wdThis = wdThis;
 this.wdContext = wdThis.wdGetContext();
 this.wdControllerAPI = wdThis.wdGetAPI();
 this.wdComponentAPI = wdThis.wdGetAPI().getComponent();
//@@begin javadoc:wdDoInit()
/** Hook method called to initialize controller. */
//@@end
public void wdDoInit()
 //@@begin wdDoInit()
 try{
 IWDMessageManager manager1 = wdComponentAPI.getMessageManager();
 IWDClientUser user = WDClientUser.getLoggedInClientUser();
 String logUser= user.getSAPUser().getUniqueName();
 wdContext.currentContextElement().setUserid(logUser);
 wdThis.wdGetAPPController().executeBapi_Employee_Getdata_Input();//Returns the user id for the employee
 Collection nomineeList = new ArrayList();
 wdThis.wdGetAPPController(). executeZ_Hrfm_Nominee_Disp_Input( );
 int nomineeTableSize = wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().size();
 for(int i=0;i< nomineeTableSize;i++){
 IPrivateAPPView.IDisplay_table_nodeElement ele = wdContext.nodeDisplay_table_node().createDisplay_table_nodeElement();
 ele.setAddr(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getAddr());
 ele.setDob(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getDob());
 ele.setGuard(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getGuard());
 ele.setName(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getName());
 ele.setPerc(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getPerc());
 ele.setRelat(wdContext.nodeZ_Hrfm_Nominee_Disp_Input().nodeOutput_Nominee().nodeNominee().getNomineeElementAt(i).getRelat());
 nomineeList.add(ele);
 wdContext.nodeDisplay_table_node().bind(nomineeList);
 wdContext.currentContextElement().setEdit_val_attr(true);
 if(nomineeTableSize<=0){
 wdContext.currentContextElement().setCreateButtonEnable(true);
 wdContext.currentContextElement().setEditButtonEnable(false);
 else{
 wdContext.currentContextElement().setCreateButtonEnable(false);
 wdContext.currentContextElement().setEditButtonEnable(true);
 catch(Exception e){
 wdComponentAPI.getMessageManager().reportException("",true);
 //@@end
//@@begin javadoc:wdDoExit()
/** Hook method called to clean up controller. */
//@@end
public void wdDoExit()
 //@@begin wdDoExit()
 //@@end
//@@begin javadoc:wdDoModifyView
Hook method called to modify a view just before rendering.
This method conceptually belongs to the view itself, not to the
controller (cf. MVC pattern).
It is made static to discourage a way of programming that
routinely stores references to UI elements in instance fields
for access by the view controller's event handlers, and so on.
The Web Dynpro programming model recommends that UI elements can
only be accessed by code executed within the call to this hook method.
@param wdThis Generated private interface of the view's controller, as
 provided by Web Dynpro. Provides access to the view controller's
 outgoing controller usages, etc.
@param wdContext Generated interface of the view's context, as provided
 by Web Dynpro. Provides access to the view's data.
@param view The view's generic API, as provided by Web Dynpro.
 Provides access to UI elements.
@param firstTime Indicates whether the hook is called for the first time
 during the lifetime of the view.
//@@end
public static void wdDoModifyView(IPrivateAPPView wdThis, IPrivateAPPView.IContextNode wdContext, com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
 //@@begin wdDoModifyView
 //@@end
//@@begin javadoc:onActionGetData(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionGetData(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionGetData(ServerEvent)
 //$$begin ActionButton(-535519310)
 //wdThis.wdGetAPPController().executeZ_Hrfm_Nominee_Disp_Input();
 //$$end
 //@@end
//@@begin javadoc:onActionEdit(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionEdit(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionEdit(ServerEvent)
 //$$begin ActionButton(-535519310)
 displayTablesize=wdContext.nodeDisplay_table_node().size();
 if(displayTablesize<5){
 for(int i=0;i<size-displayTablesize;i++){
 IPrivateAPPView.IDisplay_table_nodeElement ele = wdContext.nodeDisplay_table_node().createDisplay_table_nodeElement();
 wdContext. nodeDisplay_table_node().addElement(ele);
 operation="MOD";
 wdContext.currentContextElement().setTableReadOnly(true);
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setOperation(operation);
 //$$end
 //@@end
//@@begin javadoc:onActionCreate(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionCreate(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionCreate(ServerEvent)
 int month=0,year=0,day=0;
 String month1,day1,year1;
 try{
 displayTablesize=wdContext.nodeDisplay_table_node().size();
 wdContext.currentContextElement().setEdit_val_attr(false);
 if(wdContext.nodeDisplay_table_node().isEmpty()){
 if(displayTablesize<5){
 Calendar cal=Calendar.getInstance();
 month=cal.get(Calendar.MONTH)+1;
 if(month==1||month==2||month==3||month==4||month==5||month==6||month==7||month==8||month==9){
 month1="0"+month;
 else{
 month1=""+month;
 day = cal.get(Calendar.DAY_OF_MONTH);
 if(day==1||day==2||day==3||day==4||day==5||day==6||day==7||day==8||day==9){
 day1= "0"+day;
 else{
 day1=""+day;
 year = cal.get(Calendar.YEAR);
 year1=""+year;
 String strFormat=day1"."month1"."year1;
 wdContext.currentOutput_NomineeElement().setBegda(strFormat);
 wdContext.currentOutput_NomineeElement().setEndda("31.12.9999");
 for(int i=0;i<size-displayTablesize;i++){
 IPrivateAPPView.IDisplay_table_nodeElement ele = wdContext.nodeDisplay_table_node().createDisplay_table_nodeElement();
 wdContext. nodeDisplay_table_node().addElement(ele);
 operation="INS";
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setOperation(operation);
 wdContext.currentContextElement().setTableReadOnly(true);
 catch(NullPointerException npe){
 wdComponentAPI.getMessageManager().reportException("No Data Available",true);
 //@@end
//@@begin javadoc:onActionSaveData(ServerEvent)
/** Declared validating event handler. */
//@@end
public void onActionSaveData(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
 //@@begin onActionSaveData(ServerEvent)
 float percentage=0;
 float dupePercentage=0;
 boolean isTest = false;
 Collection DispTList = new ArrayList();
 IWDMessageManager manager1 = wdComponentAPI.getMessageManager();
 try{
 displayTablesize = wdContext.nodeDisplay_table_node().size();
 //for(int i=1;i<=displayTablesize;i++){
 for(int i=0;i<displayTablesize;i++){
 BigDecimal share = wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getPerc();
 String name = wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getName();
 percentage = share.floatValue();
 dupePercentage = dupePercentage + percentage;
 if(name!=null && share!=null){
 Zst_Hr_Nominee nominee = new Zst_Hr_Nominee();
 nominee.setAddr(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getAddr());
 manager1.reportSuccess(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getAddr());
 nominee.setDob(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getDob());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getDob());
 nominee.setGuard(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getGuard());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getGuard());
 nominee.setName(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getName());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getName());
 nominee.setPerc(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getPerc());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getPerc());
 nominee.setRelat(wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getRelat());
 manager1.reportSuccess(""+wdContext.nodeDisplay_table_node().getDisplay_table_nodeElementAt(i).getRelat());
 DispTList.add(nominee);
 wdContext.nodeZ_Hrfm_Nominee_Ins_Mod_Input().nodeNominee_ins().bind(DispTList);
 if((dupePercentage)!=100)
 wdComponentAPI.getMessageManager().reportException(
 "The sum of the share Percentages is not 100. Modify the percentages accordingly",true);
 wdContext.nodeZ_Hrfm_Nominee_Ins_Mod_Input().nodeNominee_ins().bind(DispTList);
 IWDMessageManager manager = wdComponentAPI.getMessageManager();
 String beginDate = wdContext.currentOutput_NomineeElement().getBegda();
 manager.reportSuccess(wdContext.currentOutput_NomineeElement().getBegda());
 String endDate=wdContext.currentOutput_NomineeElement().getEndda();
 manager.reportSuccess(wdContext.currentOutput_NomineeElement().getEndda());
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setBegda(beginDate);
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setEndda(endDate);
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setOperation(operation);
 wdComponentAPI.getMessageManager().reportSuccess(operation);
 wdThis.wdGetAPPController().executeBapi_Employee_Getdata_Input();
 wdThis.wdGetAPPController().executeZ_Hrfm_Nominee_Ins_Mod_Input();
 //wdContext.currentContextElement().setTableReadOnly(false);
 catch(Exception e){
 e.getMessage();
 //@@end
The following code section can be used for any Java code that is
not to be visible to other controllers/views or that contains constructs
currently not supported directly by Web Dynpro (such as inner classes or
member variables etc.). 
Note: The content of this section is in no way managed/controlled
by the Web Dynpro Designtime or the Web Dynpro Runtime.
//@@begin others
int nomineeTableSize = 0;
int displayTablesize = 0;
String operation= null;
int size=5;
// float dupePercentage=0;
//String mod_op="MOD";
//@@end
content of obsolete user coding area(s) -
//@@begin obsolete:javadoc:onActionSave(ServerEvent)
// /** Declared validating even
Component controller code
// This file has been generated partially by the Web Dynpro Code Generator.
// MODIFY CODE ONLY IN SECTIONS ENCLOSED BY @@begin AND @@end.
// ALL OTHER CHANGES WILL BE LOST IF THE FILE IS REGENERATED.
package com.gmr.ess;
// IMPORTANT NOTE:
// ALL IMPORT STATEMENTS MUST BE PLACED IN THE FOLLOWING SECTION ENCLOSED
// BY @@begin imports AND @@end. FURTHERMORE, THIS SECTION MUST ALWAYS CONTAIN
// AT LEAST ONE IMPORT STATEMENT (E.G. THAT FOR IPrivateAPP).
// OTHERWISE, USING THE ECLIPSE FUNCTION "Organize Imports" FOLLOWED BY
// A WEB DYNPRO CODE GENERATION (E.G. PROJECT BUILD) WILL RESULT IN THE LOSS
// OF IMPORT STATEMENTS.
//@@begin imports
import java.util.Iterator;
import com.gmr.ess.wdp.IPrivateAPP;
import com.gmr.pck.Bapi_Employee_Getdata_Input;
import com.gmr.pck.Bapip0002B;
import com.gmr.pck.Z_Hrfm_Nominee_Disp_Input;
import com.gmr.pck.Z_Hrfm_Nominee_Ins_Mod_Input;
import com.gmr.pck.Zst_Hr_Nominee;
import com.sap.lcr.api.util.SetProfileConnect;
import com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException;
import com.sap.tc.webdynpro.progmodel.api.IWDMessageManager;
//@@end
//@@begin documentation
//@@end
public class APP
Logging location.
private static final com.sap.tc.logging.Location logger =
 com.sap.tc.logging.Location.getLocation(APP.class);
static
 //@@begin id
 String id = "$Id$";
 //@@end
 com.sap.tc.logging.Location.getLocation("ID.com.sap.tc.webdynpro").infoT(id);
Private access to the generated Web Dynpro counterpart
for this controller class. 
Use <code>wdThis</code> to gain typed access to the context,
to trigger navigation via outbound plugs, to get and enable/disable
actions, fire declared events, and access used controllers and/or
component usages.
@see com.gmr.ess.wdp.IPrivateAPP for more details
private final IPrivateAPP wdThis;
Root node of this controller's context. 
Provides typed access not only to the elements of the root node
but also to all nodes in the context (methods nodeXYZ())
and their currently selected element (methods currentXYZElement()).
It also facilitates the creation of new elements for all nodes
(methods createXYZElement()). 
@see com.gmr.ess.wdp.IPrivateAPP.IContextNode for more details.
private final IPrivateAPP.IContextNode wdContext;
A shortcut for <code>wdThis.wdGetAPI()</code>. 
Represents the generic API of the generic Web Dynpro counterpart
for this controller. 
private final com.sap.tc.webdynpro.progmodel.api.IWDComponent wdControllerAPI;
A shortcut for <code>wdThis.wdGetAPI().getComponent()</code>. 
Represents the generic API of the Web Dynpro component this controller
belongs to. Can be used to access the message manager, the window manager,
to add/remove event handlers and so on. 
private final com.sap.tc.webdynpro.progmodel.api.IWDComponent wdComponentAPI;
public APP(IPrivateAPP wdThis)
 this.wdThis = wdThis;
 this.wdContext = wdThis.wdGetContext();
 this.wdControllerAPI = wdThis.wdGetAPI();
 this.wdComponentAPI = wdThis.wdGetAPI().getComponent();
//@@begin javadoc:wdDoInit()
/** Hook method called to initialize controller. */
//@@end
public void wdDoInit()
 //@@begin wdDoInit()
 //$$begin Service Controller(1490375209)
// wdContext.nodeZ_Hrfm_Nominee_Ins_Mod_Input().bind(new Z_Hrfm_Nominee_Ins_Mod_Input());
 Z_Hrfm_Nominee_Ins_Mod_Input input = new Z_Hrfm_Nominee_Ins_Mod_Input();
 input.addNominee(new Zst_Hr_Nominee());
 wdContext.nodeZ_Hrfm_Nominee_Ins_Mod_Input().bind(input);
 //$$end
 //$$begin Service Controller(-932523997)
 wdContext.nodeZ_Hrfm_Nominee_Disp_Input().bind(new Z_Hrfm_Nominee_Disp_Input());
 //$$end
 //$$begin Service Controller(-368783613)
 wdContext.nodeBapi_Employee_Getdata_Input().bind(new Bapi_Employee_Getdata_Input());
 //$$end
 //@@end
//@@begin javadoc:wdDoExit()
/** Hook method called to clean up controller. */
//@@end
public void wdDoExit()
 //@@begin wdDoExit()
 //@@end
//@@begin javadoc:wdDoPostProcessing()
Hook called to handle data retrieval errors before rendering.
After doModifyView(), the Web Dynpro Framework gets all context data needed
for rendering by validating the contexts (which in turn calls the supply
functions and supplying relation roles). In this hook, the application
should handle the errors which occurred during validation of the contexts.
Using preorder depth-first traversal, this hook is called for all component
controllers starting with the current root component.
Permitted operations:
- Flushing model queue
- Creating messages
- Reading context and model data
Forbidden operations:
- Invalidating model data
- Manipulating the context
- Firing outbound plugs
- Creating components
@param isCurrentRoot true if this is the root of the current request
//@@end
public void wdDoPostProcessing(boolean isCurrentRoot)
 //@@begin wdDoPostProcessing()
 //@@end
//@@begin javadoc:wdDoBeforeNavigation()
Hook before the navigation phase starts.
This hook allows you to flush the model queue and handle any
errors that occur. Firing outbound plugs is allowed in this hook.
Using preorder depth-first traversal, this hook is called for all component
controllers starting with the current root component.
@param isCurrentRoot true if this is the root of the current request
//@@end
public void wdDoBeforeNavigation(boolean isCurrentRoot)
 //@@begin wdDoBeforeNavigation()
 //@@end
//@@begin javadoc:wdDoApplicationStateChange()
Hook that informs the application about a state change.

This hook is called e.g. to tell the application that will be
<ul>
<li>left via a suspend plug and therefore should go into a suspend/sleep
 mode with minimal need of resources. errors that occur. Firing
 outbound plugs is allowed in this hook.
<li>left due to a timeout and could write it's state to a data base if the
 user comes back later on
</ul>
The concrete reason is available via IWDApplicationStateChangeInfo

Important: This hook is called for the top level component only!
@param stateChangeInfo contains the information about the nature of the state change
@param stateChangeReturn allows the application to ask for a different state change.
 The framework is allowed to ignore it considering i.e. the current resources situation.
//@@end
public void wdDoApplicationStateChange(com.sap.tc.webdynpro.progmodel.api.IWDApplicationStateChangeInfo stateChangeInfo, com.sap.tc.webdynpro.progmodel.api.IWDApplicationStateChangeReturn stateChangeReturn)
 //@@begin wdDoApplicationStateChange()
 //@@end
//@@begin javadoc:executeBapi_Employee_Getdata_Input()
/** Declared method. */
//@@end
public void executeBapi_Employee_Getdata_Input( )
 //@@begin executeBapi_Employee_Getdata_Input()
 //$$begin Service Controller(1705750894)
 IWDMessageManager manager = wdComponentAPI.getMessageManager();
 Iterator itrGetData = null;
 Bapip0002B out = null;
 try
 wdContext.currentBapi_Employee_Getdata_InputElement().modelObject().execute();
 wdContext.nodeOutput().invalidate();
 itrGetData = wdContext.currentOutputElement().modelObject().getPersonal_Data().iterator();
 while (itrGetData.hasNext()) {
 out = (Bapip0002B) itrGetData.next();
 empNo = out.getPerno();
 wdContext.currentZ_Hrfm_Nominee_Disp_InputElement().setPernr(empNo);
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().setPernr(empNo);
// manager.reportSuccess(empNo);
 //wdThis.executeZ_Hrfm_Nominee_Disp_Input();
 catch(WDDynamicRFCExecuteException e)
 manager.reportException(e.getMessage(), false);
 //$$end
 //@@end
//@@begin javadoc:executeZ_Hrfm_Nominee_Disp_Input()
/** Declared method. */
//@@end
public void executeZ_Hrfm_Nominee_Disp_Input( )
 //@@begin executeZ_Hrfm_Nominee_Disp_Input()
 //$$begin Service Controller(-366407911)
 IWDMessageManager manager = wdComponentAPI.getMessageManager();
 try
 wdContext.currentZ_Hrfm_Nominee_Disp_InputElement().modelObject().execute();
 wdContext.nodeOutput_Nominee().invalidate();
 catch(WDDynamicRFCExecuteException e)
 manager.reportException(e.getMessage(), false);
 //$$end
 //@@end
//@@begin javadoc:executeZ_Hrfm_Nominee_Ins_Mod_Input()
/** Declared method. */
//@@end
public void executeZ_Hrfm_Nominee_Ins_Mod_Input( )
 //@@begin executeZ_Hrfm_Nominee_Ins_Mod_Input()
 //$$begin Service Controller(1524028406)
 IWDMessageManager manager = wdComponentAPI.getMessageManager();
 try
 wdContext.currentZ_Hrfm_Nominee_Ins_Mod_InputElement().modelObject().execute();
 wdContext.nodeOutput_nominee_ins_mod().invalidate();
 catch(WDDynamicRFCExecuteException e)
 manager.reportException(e.getMessage(), false);
 //$$end
 //@@end
The following code section can be used for any Java code that is
not to be visible to other controllers/views or that contains constructs
currently not supported directly by Web Dynpro (such as inner classes or
member variables etc.). 
Note: The content of this section is in no way managed/controlled
by the Web Dynpro Designtime or the Web Dynpro Runtime.
//@@begin others
String empNo = null;
//@@end
Suman
Edited by: sumankumar kurimilla on Dec 23, 2008 9:26 AM

Hi,
I have checked from RFC side that is working fine only java app its not working can you tell any thing needs to be changed from my application end.
Please check in Savedata action.
Regards,
Suman
Edited by: sumankumar kurimilla on Dec 23, 2008 11:01 AM

Which jar file(s) from the Eclipse plug-in to use

Post Author: supermonkey
CA Forum: JAVA
Hi,I downloaded JRC plug-in and realized there are 47 jar files for CR. Now I'm wondering how many of these 47 files are being use when running CR from Java? My Java application resides on a server and users access the application thru web start. If users have to download all 47 jar files every time they run the application, it would su*k for them very much. Now does anyone know which jar files are actually being use during execution?The document here http://support.businessobjects.com/communityCS/TechnicalPapers/cr_xi_r2_jrc_deployment.pdf.asp told me that I only need about 20 or so of them. I plugged into the classpath or my test application and errors occurred. Exception in thread "AWT-EventQueue-0" java.lang.NoClassDefFoundError: org/apache/commons/configuration/CompositeConfiguration at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java:620) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124) at java.net.URLClassLoader.defineClass(URLClassLoader.java:260) at java.net.URLClassLoader.access$000(URLClassLoader.java:56) at java.net.URLClassLoader$1.run(URLClassLoader.java:195) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319) at com.crystaldecisions.reports.common.engine.ConfigurationManager.<init>(Unknown Source) at com.crystaldecisions.reports.common.engine.Engine.configure(Unknown Source) at com.crystaldecisions.reports.common.engine.Engine.getConfigurationManager(Unknown Source) at com.crystaldecisions.reports.common.engine.a.a(Unknown Source) at com.crystaldecisions.reports.common.engine.Engine.getKeycodeManager(Unknown Source) at com.businessobjects.reports.sdk.a.a(Unknown Source) at com.businessobjects.reports.sdk.a.<init>(Unknown Source) at com.businessobjects.reports.sdk.a.if(Unknown Source) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.void(Unknown Source) at com.businessobjects.reports.sdk.JRCCommunicationAdapter.connect(Unknown Source) at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.int(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportAppSession.initialize(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ClientDocument.for(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.for(Unknown Source) at com.crystaldecisions.sdk.occa.report.application.ClientDocument.open(Unknown Source) at com.crystaldecisions.reports.sdk.ReportClientDocument.open(Unknown Source) at JRCViewReport.launchApplication(JRCViewReport.java:26) at JRCViewReport$1.run(JRCViewReport.java:50) at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209) at java.awt.EventQueue.dispatchEvent(EventQueue.java:597) at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:273) at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:183) at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:173) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:168) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:160) at java.awt.EventDispatchThread.run(EventDispatchThread.java:121) Now does anyone know which jar files are actually being use during execution? Or are all them have to be present? thanks,

Post Author: supermonkey
CA Forum: JAVA
Hi Ted,Thanks for the reply. But what I was interested in knowing was how many of the Eclipse-CR plugin jar files does CR require for a successful execution? Or do I have to import all 47 jar files? thanks

Is it possible to get the Source from the Compiled Java Class File?

Hello All,
I wrote a java file which uses Java Swing to crea a GUI.I have also compiled the jave file.
The problem now is that i've made many changes and compiled it many times.Now suddenly due to some problem,the contents of tha Java file have been deleted and it shows 0 bytes.
Is there any way to recover my Java source file from the Class file?I would be thankful to anyone who can help me out on this.
Thanks in Advance,
Regards,
Vijayakannan

Yes and no, you can reverse engineer it to an extent, it wont look exactly like your original source though, it'll be full of commented out bytecode bits etc. As its your own code though you've got the best chance of deciphering it. Go to somewhere like www.tucows.com to download the software for doing it.
ARB

C410a won't to mac with OSX 10.8 but is accessible from the web server or from older OSX

The c410a has ceased to behave with Mountain Lion. The newer OS machines can still access via the embedded web server, but no other way. Older mac running Lion has no issues
Since I recently upgraded Norton on the newer machines, I suspect that may be an issue.
This question was solved.
View Solution.

What router?
Why are you using Norton? There is no such thing as a Mac virus and until there is....
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

An index of my desktop files appears in firefox. why is it there? does this mean my personal files are accessible from the internet? how can i make sure this goes away and stops?

i am seeing and index of my personal files on firefox. what is this? why is it there? how can i make it go away? does this mean my desktop files are on the internet? can someone explain clearly and simply (i am not tech saavy at all) thank you

This issue can be caused by an old bitmap version of the Helvetica or Geneva font or (bitmap) fonts that Firefox can't display in that size.
Firefox can't display some old bitmap fonts in a larger size and displays gibberish instead.
You can test that by zooming out (View > Zoom > Zoom Out, Ctrl -) to make the text smaller.
Uninstall (remove) all variants of that not working font to make Firefox use another font or see if you can find a True type version that doesn't show the problem.
There have also been fonts with a Chinese name reported that identify themselves as Helvetica, so check that as well.
Use this test to see if the Helvetica font is causing it (Copy & Paste the code in the location bar and press Enter):
<pre><nowiki>data:text/html,
Helvetica abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ 
Helvetica Neue abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
</nowiki></pre>
You should reset the network.http prefs that show user set on the about:config page. 
Not all websites support http pipelining and if they do not then you can have issues with images or other problems.
See also http://kb.mozillazine.org/Images_or_animations_do_not_load#First_steps

Creating an xml file from the Basic java Object

how to create an XML file using the values available in the object with reference to an xsd or dtd file..
(OR )
is it possible to write the contents of an object to an xml file without knowing the dtd or xsd file .......

how to create an XML file using the values available in the object with reference to an xsd or dtd file..
(OR )
is it possible to write the contents of an object to an xml file without knowing the dtd or xsd file .......

Is a DSN (ODBC-derived) accessible from the Eclipse Java SDK?

Similar Messages

Maybe you are looking for