Is DART available on XI(PI)?

I have searched on our XI(PI)7.0 but failed to find DART.
Is DART available on XI(PI)? If so, how to access it?
Thanks a lot!

Hi,
When a new service pack is first released, the patch level goes back to zero. Subsequent patches that apply to that service pack are then numbered from one onwards.
It would however be technically possible to install a service pack and the patch level still stay the same. For example if you were on V2005 SP0 Patch 0, and installed the Service Pack 1 upgrade, the patch level would remain at 0.
The version info on the file should also contain a property for the servicepack as well as the special build. You can check them both for completeness.
Regards
Pankaj Prasoon

Similar Messages

  • DaRT with Windows 8.1 not working on some machines

    Problem: x64 bit DaRT8/801/8.1 not recognizing the OS and utlities are greyed out/unavailable on some machines.
    System: Windows 8.1 x64
    Steps taken:
    Tried different DaRT toolset versions, set BIOS SATA operation to different modes, tried both UEFI and Legacy mode secure boot mode off/on, created the DaRT image with Windows 8 installation media and Windows 8.1, tested the DaRT boot iso on Virtual Machines
    and it worked, all the utilities available.
    Eventually gave up and booted into MiniXP from Hirens boot CD and reset the local account password with NTpass tool.
    Why would DaRT work on some machines and not on others?

    How was the SATA configured originally? If it was configured for RAID/AHCI and the DaRT disk does not have the RAID/AHCI driver the operating system may not be detectable, even if the mode is changed in the firmware.
    Brandon
    MDOP on the Springboard Series on TechNet

  • AnyConnect 3.1.05160 - no valid certificates available for authentication

    Hi all,
    one of our customer is running the above AC version and hitting the above error.
    form the DART file I gathered the following information
    Description : Server certificate validation failed with the following errors:
    Certificate does not match the server name.
    Certificate is from an untrusted source.
    Certificate is not identified for this purpose.
    Certificate is malformed.
    Certificate is explicitly distrusted.
    I am sure the Cert is valid however reading the following article got me thinking,  https://supportforums.cisco.com/discussion/11533701/cisco-anyconnect-3008057-certificate-validation-failure.
    could this be the same reason, haven't mentioned this to my customer as he is running 3.1.05. but could this be related to the same issue?
    thanks in advance
    Lance

    I also had the problem of "no valid certificates available for authentication", although it only prompted once, rather than a flood like the OP.
    However, the cause and solution for my problem was:
    The certificate used for authentication was issued by my internal CA, to the Computer, NOT the user.
    Although the user that is logged on is a local administrator, the AnyConnect Client application does not have the permission to send the certificate from the Computer store.
    The application needs to 'run as administrator'
    Right-click the application shortcut-> Properties->Compatibility->Privilege Level.
    Tick ->Run This Program As Administrator.
    I needed to reboot the client pc before this worked.
    n.b I was using Windows 8

  • DART: creating extracts for company codes

    Hi,
    in light of an archiving project of financial documents, extracts needs to be build with DART. This has to  be done on the level of company code. We would like to have approval from the FI department for the DART extracts, but we have currently 22 different company codes. 
    Do you have experience with creating extracts for multinational companies, and what was your way of working for getting approval before archiving ? Were there any external tax auditors involved ?
    thanks for sharing,
    kind regards,
    Rolf

    Hi Rolf,
    For your project you have to make a table with document type's G/L accounts how long you want to let them them in your system. This form (table should be signed of by the bussines and  auditors.
    Note: When you archive data for FI you can archive the documents (BKPF/BSEG and line items. When you only archive the documents you can still see al the postings on line items. When the archive files are still available you can go direct from the line item to the achived document. Have a look to to the archive information system perhaps here you can store more information with linkes to the archive system?
    In some FI reports it is possible to get information out of SAP and the archive system.
    With the table make a proprosal by yourself and let sign that.
    Think about that a lot of information is stored on other places to, like controlling and PCA. Offen there is no reason to keep the FI documents the information is still somewhere els available
    Paul

  • Any way to play Spotify on shuffle -- ALL the available songs not just a playlist?

    Is there any way to just play Spotify songs on shuffle, have it pick randomly among all available songs?  I would think this would be available but do not see how to do it.
    Thanks
    Bob
     

    WadeCottingham wrote:
    Well, let's be clear, this was a PAST FEATURE that was simply removed.  Early on you could easily shuffle tracks among all playlists. Later that was removed. I posted on here somewhere and some smart person on this forum told me I could just shuffle from 'Library'.  OK, that was fine, that worked, I was happy. Now, with the Black Update, 'Library' is gone, along with the ability to shuffle-play songs randomly automatically darting in and out among all my playlists. That is a feature I dearly liked too, dang it. I agree, it's LAME to not be able to shuffle play ALL SONGS in ALL PLAYLISTS. 
    It would be great to shuffle all music available on Spotify but for now I would be very happy to just have the old 'library' function back.For now I just made a folder which I named 'Library' and put all my playlists in it. Since I also have a lot of songs that are not in a playlist I always save every song/album to a playlist named 'All music' and put that playlist in the 'Library' folder as well. I just like to play my music on shuffle and be surprised by some song I haven't heard in ages, don't know why it's not possible to just implement this in Spotify.I know it's not a pretty workaround but since there is no other option I got used to it. Too bad the folder won't show a the songs in it as a list...no logic behind that because it makes things more difficult like search and clicking on album art for instance.

  • Dart is now in [community]

    Hi,
    Dart is a programming language by Google that is increasing in popularity. Some say it's Google's attempt at making a user friendly programming language and environment that is accessible for "everyone". Others prefer it over JavaScript for making web applications. In any case, it has now been made an official Arch Linux package and is readily available as "dart".
    However, the default download (big blue "Download Dart" button on the front page of http://dartlang.org) not only comes with the dart-sdk and dart-editor, but also dartium, a modified version of chromium that can be used for debugging dart applications and for running the dart language directly (and faster) instead of translating it to JavaScript first. As I understand, Google wish that dart was the preferred language of programming web-applications, instead of JavaScript, and has hopes that it one day may be included in all the most widespread browsers.
    Dartium takes 391 MB, while the rest (sdk+editor) only takes 83 MB. The SDK and Editor is still fully usable and when clicking "run", the dart applications start just fine in Firefox, Chrome or whichever browser that has a sufficient amount of JavaScript support.
    While the Arch Linux policy is normally to package the defaults provided by upstream, it seems somewhat excessive (and bloated) to include the 309 MB large dartium browser together with the sdk+editor. Only packaging the sdk was also a possiblity, but I think 83 MB is an acceptable size and there's also the consideration that upstream provides all this in the default download.
    Unfortunately, dartlang.org provides no source releases, only binary releases and access to various source repositories. They, as many other google projects, depends on gclient in order to fetch the right source code from various repositories. It's currently not a tempting prospect to package dart from source (but by all means, if someone wants to do this, submit an AUR package an get in touch! ).
    The comments on the page for the dart-sdk package in AUR gradually came to be more about dart as a whole, rather than about the dart-sdk package, which is why I post this here.
    Splitting dart into dart-sdk and dart-editor would also be a possibility, but they are provided as one package by upstream and I imagine that most users would want to use them together. I would also imagine that 83 MB is an acceptable size, but not 391 MB.
    My main question is this: Should dartium be included in the dart package, making it a whopping 391 MB? (or should we instead nag upstream to provide both source releases and downloads that are split into the respective components?)
    Moving dart back from [community] to AUR, while waiting for the whole thing to mature, is also a possibility. But that wouldn't be any fun.
    Last edited by xyproto (2013-11-04 08:55:38)

    I have been packaging Dart for Ubuntu in my PPA for a while now. Through user feedback and the like I have come to the conclusion that the best split-up (as defined by making most people happy) was like this:
    dart: meta package, pulls all others in
    dartvm: includes only the 'dart' executable, nothing else
    dartsdk: includes the entire dart folder of the upstream zip file
    darteditor: includes only the editor but nothing else
    dartium: includes only the chromium directory of the upstream zip file
    I am then installing the things and symlinking around in such a way that nothing in the packages is installed (or downloaded) twice and all components find each other automatically. Basically you simply have to recreate the structure that the contents of the original zip file have for things to be happy.
    This way people can install as much or as little of Dart as they want. For example the DartVM package is only about 8MB and is all you need to run command line Dart scripts.
    About Dartium: AFAIK it is planned that Dart will eventually be included in standard Chromium Builds but this won't happen before 1.0 and might not happen for quite a while after. It is also possible that the Chrome team will decide that Dart hurts the web more than it benefits in which case it will never happen. All those things are not yet decided. Therefore I think it would be best to simply rip the Dartium out of their binary release and use that for the time being. It is nothing more than a debugging tool for Dart programmers for now anyway.
    Also Dartium is not recommended to be used as your standard browser but rather just for Dart coding. I have made some changes in my packaging to the included chromium start scripts to make it use its own profile rather than the normal chromium profile because of this. I know that Arch has a as-close-to-upstream-as-possible mantra but I think in this case it makes sense to not mix up a release browser's profile with a experimental debugging browser that might mess things up in there.
    Last edited by hachre (2013-11-05 06:56:30)

  • BDO darts on BT Sport catch up player

    I been enjoying BT coverage of the BDO darts but I missed some of it last night and the night and only seen the BBC highlights late last night while getting ready for bed.
    I went on the BT catch up play to find only up to day 6 was being showen. What  about last night day 7 and the days darts day 8.
    BT seem a little slow at times in doing there BT sports catch up service.
    Darren
    Solved!
    Go to Solution.

    The reason might be due to the sharing of broadcasting rights with the BBC, highlights may have to be shown on BBC first before becoming available on BT Sport catch-up.

  • DART Version 2.6

    Hello Seniors,
    We are currently using ECC 6.0. We are planning to test/implement DART version 2.6 available in our system as per our current requirement. We are only working around the transaction FTW0.
    What we are looking for is : - more information on how to run queries/reports to get required data using reporting/queries.
    Also, it would be very helpful if anyone can provide me the complete details, Technical + Functional procedure involved in DART as used in a project as we are very much in need of it. Your help is highly appreciated. Thank you all in advance,
    Chaitanya.

    Dear Mark,
    Thank you for the reply. I see information of countries that use DART. It helps us to an extent. Actually what I am looking for is a complete technical + functional approach on DART 2.6 on ECC 6.0. Any solutions, suggestions or screen shot documents will help us greatly. As documents can help us understand the procedures and configurations involved. As I said previously, we are working on DART 2.6 on ECC 6.0 and we are working on FTW0 for trial runs.
    We have a short dump and the system shows:
    ""A DART extraction tool terminates with runtime error RAISE_EXCEPTION in program SAPLTXW2. The exception condition is
    INVALID_STRUCTURE.""
    We see that we have an error reading "INVALID_STRUCTURE". We are currently looking for notes / solution to fix this issue. We found a note "SAP Note 176811 - DART tool terminates with RAISE_EXCEPTION". This note didn't address any fixes for ECC 6.0 though. Could you please let us know about any technical (& or) Functional documentation. Sorry for the delayed reply, Thank you in advance...
    Chaitanya CN

  • DART - Creating multiple extracts (FTW1A)

    Is there any issue (performance or error) with running the DART extract job RTXWCF02 for different extracts at the same time?  I have been running extracts one at a time for each company codewe have in SAP and I was hoping to minimize the time by running all the extracts at once.

    Hi,
    Dart extraction depends on the nnumber of  Back Ground Processors available .You can get this information from the Basis Team.
    The more the number of background processors available to you the better are the chances of executing multiple dart extracts .
    Normally the best practise is to extract dart files in background mode on a company code basis,fiscal year and the posting period.It is always advisable to  extract dart files during Off-peak times( generally weekends OR during Night times).
    Please let me know if i have answered your question.
    Edited by: Spike on May 23, 2008 4:47 PM

  • DaRT relevant countries

    Hi,
      My Company is starting a data archiving in the system, before Data Archiving we wanted to implement the DaRT.
    As our ERP system is available in 100+ countries it is not fesaible to run the DaRT extract for all companies.
    If anybody has the list of countries for which DaRT is mandatory please pass on to me.
    Thanks and Regards,
    Ankit Gupta

    Dear Ankgupta,
    surely there are countries listed in official documents for DART usage based on projects or official SAP documentation.
    DART Solutions available for: Germany, USA, Portugal, Poland
    Countries covered by Standard DART: Austria, Switzerland, Netherland, Czechia and others.
    Counties which has to be extended in DART: Hungary, Spain, France.
    On top other countries like Italy or Russia are legally allowed to request everything but you might not get a clear statement
    by the country. Besides I  know from my previous projects that Brasil, Canada and Mexico also requested the usage of DART with extensions. 
    Therefore  I would suggest that you first organize meetings with your HQ tax responsible to implement a sign off procedure which allows you to get a clear overview about each single country. This sign-off procedure should easily ask the countries if they need DART and if the current field catalogue is sufficient This is only way how to make it correctly on long-term as only the country responsible can decide if they need DART for Tax Audits. They know their law at its best. Currently more and more countries decide to switch to electronically tax audits; you would never be updated  without them.
    Based on this sign-offs you can prepare your Data Archiving preparation country by country.
    As you have very strong dependencies between the residency and retention times of the countries, DART extracts and also between several archiving objects. You should have a look in the service market place service.sap.com/ilm. There you will find an excel spreadsheet which clearly shows you the full dependencies between DART and each archiving object.
    If you think for this activity you need consultancy I would suggest to ask SAP directly for support.
    They know the right persons which can support you and help you to get in contact to other SAP customers
    which have a similar problem like you.
    I hope my small explanation could help a little bit.
    kind regards
    Bernd Nowack

  • My mac's software is only available under my profile on MacBook pro. How can other family members get to the optional SW logged in under their own profile

    Is there a way to share purchased SW under mote than one profile on the MacBook pro?
    Thanks

    If the software is in the HD>Applications folder it's available to everyone. If for some reason you put software into User>Applications folder it will be available only to that user.

  • Adobe Cloud is installed on my desktop and one laptop computer. Upon noticing updates were available yesterday, I successfully installed them on my laptop. Today, I cannot get Abobe Cloud to open on my desktop.

    Adobe Cloud is installed on my desktop and one laptop computer. Upon noticing updates were available yesterday, I successfully installed them on my laptop. Today, I cannot get Abobe Cloud to open on my desktop.

    We don't know what Apple plans on doing to change this (and it may not be just Apple but more likely the publishers, since Apple would, of course, do whatever it could to maximize sales/profits).  Right now you can only read Apple books on mobile devices. Sure, buy them from Amazon if you want to read them on the computer. We don't work for Apple so we're pretty impartial on this kind of advice.
    You might also see what your library can offer.  My wife can browse the county library from her iPhone, borrow e-versions, and read books on it too.  Free!

  • Service Desk - Expert Mode - Not all actions are available

    Dear SAP colleagues,
    I have just implemented the Service Desk in our SOLMAN system.
    1. I choose Incident Management
    2. I click on Queries
    3. I click on a ticket (Transaction ID).
    4. I edit the message
    5. When I select Actions, I only have the 4 following options :
        - Send Message to SAP
        - Maintain SAP Logon Data
        - Display SAP Action Log
        - Update SAP Message
    When I consult some demos, there are many differents options available in Actions menu, as, for example :
    - Open System fro SAP
    - Confirm Message to SAP
    - E-Mail to Message Creator (Mail)
    - Print Message
    - Create Change Document
    - Call Solution Manager Diagnostics.
    Is it due to an missing authorizations (roles and profiles) ?
    Thanks for your input.
    Best regards
    CP2009

    Dear Rajeev,
    First of all, thanks for your input.
    I have choosen SIVA when I have activated BC Sets.
    Should I activate also BC Sets for transaction type SLFN ?
    1. I have started SPPFCADM and follow your recommandations.
    2. I have choosen CRM_ORDER
    3. I have then click on "Condition Configuration (Transportable Conditions)
    4. There are many entries related to the Support and Service Desk
    Example : Support Desk Message Action Profile
    I have 5 actions defined -
    Action 01 : Send Message to Processor
    Action 02 : Create/Change Basis Message from CRM Procedure
    Action 03 : Send Notification to SAP
    Action 04 : Update Message from SAP
    Action 05 : Confirm Message to SAP
    I have activate BC Sets for transaction type SIVA, not for SLFN.
    Best regards
    CP2009

  • (Request for reporting available) is not coming in Cube

    Hi All,
    I have Cube & DSO.
    I  added fields in DSO & Cube.
    Cube1 has Aggregrates built on it.i added 5 infoobjects on it, Now when i load data from DSO to Cube(Request for reporting available) is not coming up. i cant do reporting on it. can anyone help.
    thanks in advance,
    Kiran.

    Hi ....
    Have you done the Roll up ?
    Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
    Regards,
    Debjani....

  • My app store wont let me download apps, says they are not available in the uk please help??

    my app store wont let me download apps, says there not available in the uk?? please help??

    Try This...
    Close All Open Apps...  Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
    http://support.apple.com/kb/ht1430

Maybe you are looking for