Is Intel iMac (white) harddrive interchangable with white iMac G5?

I have a new (used) Intel iMac, and I'd like to put the harddrive from an iMac G5 (no iSight) into it. Do both these computers use the same type of harddrive? Can I just swap them? Thanks.

Kappy,
Thanks for the reply. So you're saying they should have the same mounting points as well? I know they use the same type of protocol, connectors, power supply, etc. I also need to make sure they are physically compatible as well. Just being cautious.

Similar Messages

Is iMac G5 (no iSight) harddrive interchangable with Intel iMac (white)?

I have a new (used) Intel iMac, and I'd like to put the harddrive from an iMac G5 (no iSight) into it. Do both these computers use the same type of harddrive? Can I just swap them? Thanks.

I have recently done the same thing with no problems. They are both SATA drives, so there would be no problem with the system recognising them, my only concern because of the "close to the edge" limitations regarding iMac power supplies was whether the larger drive would draw too much current and exceed the safe limit for the system. I checked with the manufacturer's web site and they both drew the same power so there was no problem. I went from a 250GB to a 400GB drive.

Intel imac (white) will not start up, please help.

I have a 20" intel imac (white not silver) running 10.6.4.
I can not get it to boot up on its own, the farthest it gets is to the Silver Apple with spinning gear.
I have tried:
1. safe restart - the result is - I get a circle with slash and the a folder with ? and then the silver apple with gear spinning.
2. booting from disk warrior and running it - the result I get is -"The new directory cannot replace the original directory because of a disk malfunction."
3. reinstalling the OS from the start up disk, - the result I get is - "The contents of this disk can't be changed."
4. starting from the OS 10.6 disk and running Disk utilities - the result I get is - "Invalid node structure, The volume Macintosh HD could not be verified completely. Error: This disk needs to be repaired. Click Repair Disk." When I hit repair button I get this result, "Error: Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
All of these methods have failed me. Can anyone please help me? I really need to be able to at least recover some files from the imac. That is my main concern at this point.
Thanks in advance.

The problem is I can not get my HD to boot up, I can start up with the install disk but disk utilities can not repair the disk. I can not dragNdrop, it wont let me select files. I can not reinstall the OS because it says their is a problem with my drive. It sounds like I'm screwed but my business related info is to important to just give up.
I was able to make a disk image of a folder that had I few files I need and was able to copy that disk image to my external drive. So I may have to do that (tideous but I am willing to do that to recover the data).
Any other thoughts before I take it somewhere?

Upgrade from 10.4.11 to leopard on White 24"intel iMac?

I am totally new to MACs and purchased a white Intel iMac for my daughter. It came with a Leopard upgrade or install disc. What is the preferred method to upgrade the system? I have nothing in data at all, its brand new. Should I just do the upgrade from the disc, or an erase and install or archive and install?
For example, does leopard work better with a fresh install or does it make no difference compared with an upgrade install? Any help appreciated. I am afraid to put leopard on it because it works great now and starts up in a unbelievable 15 seconds from power on to cruise-in the net.

In your case you must do an Upgrade install as that is the only option for an Upgrade disc. I would do the following:
First,
Repairing the Hard Drive and Permissions
Boot from your Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Next, continue with Leopard upgrade and follow the instructions provided.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger and Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Intel iMac hangs at startup on white screen, no logo

Suddenly, my Intel iMac won't boot. When I turn it on, it plays the tone and hangs forever at the white lit screen. I hear the CD-ROM drive spin up, but I can't get it to boot from a CD, even if I hold down "C". I have Bootcamp installed dual-booting Vista SP1 (by default) and OS X Leopard. I can't make the boot menu appear, either.
I tried resetting the SMC as described in a troubleshooting article by unplugging everything, waiting, plugging back in the power and then the other peripherals (only network, keyboard, mouse, and a secondary display.) It had no effect.
Any suggestions, if only to narrow down what the problem might be?

mquander....did the new hard drive resolve the problem?
I have the exact same problem. It all started on a hot day, my iMac froze while just surfing the web. Only option was to power it down manually. After that the machine would not boot into OSX, it would get as far as the blue screen, but never come up with the login window. Then it started acting up and certain keyboard boot combinations would not work consistently. For example holding option down would only occasionally bring up the boot list, other times, it would just stay at a gray screen indefinitely.
Now I can't boot to anything, CD, internal hard drive, external hard drive. The gray screen comes up with no apple logo, eventually if I leave it, 10 minutes or so later it will reboot itself and just do the same thing.
I'd be curious to find out if the new hard drive resolved your problems.
Thanks
Chris

Does the first white intel imac support usb3 cable?

Just wondering if a USB3 cable CF card reader will work on on my USB2 port on my old Intel 24" white iMac?

USB3 is downward compatible with USB2. So you can plug a USB3 cable into a USB2 socket.

Intel Imac stuck at white screen and 3 beeps sound continously....

Intel Imac stuck at white screen and 3 beeps sound continously when power on. Pls help......

Well Barry, as for the Ram, all this while are install by apple technician since very day i bought iMac on july 2008. Just wondering What's actually went wrong..
Very first day I bought iMac, few days later, system cant even on. AppleCare Centre exchanged a new set of iMac.
two weeks later, i notice several dead pixels appearing on screen, call to log a case with them, later on, they changed a new panel.
After several months pass, been using happily with iMac... but since now, this problem occurs. So fastrating... My third time encounters problem with iMac. sign
Any suggestion? If not, I guess i have to bring this bulky iMac to applecare centre again. sign

SOLVED-Install not booting on Intel Imac-white screen

I just tried to install Archlinux with the new install disc fo the fifth time, without succes.
When I restart the computer all i get is a white screen.
Restarting the install disc, mounting the harddisk partitions and arch-chrooting I can get into the installed linux, I can do everything even install new programs and get these working but when starting normally it's the white screen again.
It is an Intel Imac dual core with 27" screen on whitch the old install disc did it's work flawlessly.
Any idea where I can start searching?
Last edited by mianka (2012-08-03 14:14:52)

How long do you wait on that white screen?
I have arch on two different macs - and early iMac, and an early macbook. They both have long delays on the white EFI screen.
There are allegedly ways to fix this but I have never bothered as I do not reboot either of these machines that often. Many reports claim it should be a 30 second delay, but on the IMac I'm typing from now (in arch) it is at least 2 minutes. Whenever I need to reboot this machine, I just type reboot, then go for coffee.

My intel imac White screens when booting

My intel imac White screens when booting. I have completed; power off restart - comnd-option p-r
While off I held power button 30 sec power cycled holding the apple button.

Try to restart in Safe Mode and let us know what happens.
Roger

Different Bluetooth on Aluminium imac 10.5.5 vs white intel imac 10.4.10?

I cant seem to connect via bluetooth for file transfers on my new 24" imac, but had no probs with my 17" intel imac, or my 2.16 black book. Both machines are running 10.4.10 & the new aluminum 24" is running 10.5.5

Try using System Profiler (Apple menu -> About This Mac -> More Info...) to examine the Bluetooth situation on each computer. Click on the Bluetooth item under the Hardware item in the column on the left. That will tell you the Bluetooth software version, enabled state, etc.

White Intel iMac display and crash fix

My 20" 2.16 GHz Intel Core 2 Duo had become almost useless due to freezes and crashes- with NO crash reports in the logs.
They were often preceeded by video glitches, so I assumed it was a bad video card- unfortunately soldered to mother board.
Apparently, from forum postings, this is not an uncommon problem. The computer would run longer if the day was cooler, but rarely more than 10 minutes, so I suspected it was aggravated by heat.
Then I found this post from Bodomann on an Apple Support forum:
"Following up on my previous posting regarding my son's late model 2006 iMac that required a $900 logic board replacement:
Turns out the problem is apparently related to a bad CPU temp sensor. I installed 'iMac Fan Control' (Google it) which reported the CPU temp always at 32 degrees Fahrenheit (obviously incorrect). The same software allowed me to adjust the CPU fan manually. After multiple trials I set the CPU speed to 2800RPM after which the system would run forever - never freezing with the dreaded grey box 'reboot me' screen. I tried several times reverting the software to default speeds and the system would always crash within 10 minutes. "
I downloaded free Fan Control 1.2 for Imac from Derman Enterprises (they have an Intel iMac and a Mac Book/Pro version). It installs as a system preferences control panel. I cranked up all three fan speeds. The fans sped up noticeably. Horizontal lines have gone from screen (so far), no color artifacts and no crashes yet. I may have a real computer back! Hope Apple checks this out-
The control panel also gives the temps sensors are reporting at the CPU, hard drive and DVD drive. The CPU sensor reports the CPU temp as 32 degrees F- which is clearly wrong, unless Apple has been installing little refrigerators inside.
So thanks to Bodomann for posting- Hats off and three cheers to Derman and Cristoph for source code.
http://www.derman.com/iMac-Fan-Control
http://www.lobotomo.com/products/FanControl/index.html

Foregone you have saved my life! I was fed up and disgusted with the way this machine was behaving, always freezing and crashing and with the crazy random horizontal lines. Then I downloaded the Fan Control 1.2 and have had a crash-free, line-less night ever since.
I had tried adding more RAM, cleaning the vents, the old "zap the PRAM" trick from back in the day, even my Mac guru buddy hadn't a clue what to do. After many searches on this forum to try to figure out the line issue (thinking it was a graphics card problem), not even thinking I could ever fix the crashing issue, I stumble upon your post and now I am the savior of the family. My computer game-loving 13 year old boy just about cried with joy. Now his games won't crash all the time!

IMac Intel Core2Duo white - Lucent Firewire or not?

I have this iMac:
http://www.everymac.com/systems/apple/imac/stats/imac-core-2-duo-2.16-20-inch-sp ecs.html
Is my Firewire chipset one of the Lucent chipsets some have had trouble hooking up more than two devices to?

Hi AB
I've searched and searched and really can't find any solid answer to your question! I even looked at several take apart articles to see if I couldn't ID the blasted thing on the logic board.
In the [Developer's FireWire Product-Specific Details|http://developer.apple.com/documentation/HardwareDrivers/Conceptual/HWT echFireWire/Articles/FireW_implementation.html#//apple_ref/doc/uid/TP40003892-SW61200331173], I did find where it say's +"The 17-inch and 20-inch iMacs provide two FireWire 400 ports supported by an _Open HCI FireWire controller with an integrated FireWire 400 PHY (Physical Layer)_"+ if that helps.
I then Googled: [Open HCI FireWire controller with an integrated FireWire 400 PHY (Physical Layer).|http://www.google.com/custom?hl=en&client=pub-6263300333013957&cof=FORI D%3A1%3BGL%3A1%3BLBGC%3A336699%3BLC%3A%230000ff%3BVLC%3A%23663399%3BGFNT%3A%2300 00ff%3BGIMP%3A%230000ff%3BDIV%3A%23336699%3B&ie=ISO-8859-1&oe=ISO-8859-1&q=OpenHCI+FireWire+controller+with+an+integrated+FireWire+400+PHY+%28PhysicalLayer%29.&btnG=Search], but only found a twisted maze of FireWire controllers and links with no real hard evidence of exactly which controller is used in the Intel iMac?
*Are you having trouble hooking up more than two devices?*
Dennis

Printing with a networked Canon iR 3220 and my Intel iMac

I am at my wits end and I hope someone can help.
I am the sole Mac user in my company. I have a brand new, shiny 24" dual processor (intel) iMac running OS 10.4.9, that is connecting wirelessly to our network. We have a mixture of IIS and Linux servers (I believe the IIS is solely for the Windows Exchange server) Ther are 30 or so printers on the network and the one I am supposed to be printing to is a Canon Image Runner 3220 (iR 3220).
I am no Mac newbie, but I can't get the thing to print correctly. I have updated the driver from Canon (v. 1.70PS) and the PPDs (v. 2.25), followed the instructions and it will not automatically select the correct PPD. When I reset the PPD manually, it spools to the printer, but then stops all my print jobs. I try to resume and it spools and stops.
I have tried adding the printer via CanonIP, LPR, Appletalk (which gets me a message that I am connected incorrectly), setting up a sacrificial altar to the printing gods...nothing seems to work. I've tried using the iR 3200 driver and that doesn't work either.
Does anyone have any suggestions? I would appreciate any help I can get at this point.
Mike

Hello Mike,
The first thing you need to do is determine if the iR C3220 is using the Canon printer board or the imagePASS-C1/C2 print server option. If you look at the back of the iR C3220, and there is a rectangular box with an Ethernet cable connecting to the copier, and what looks something like a SCSI-2 cable also connected between the white box and the copiers interface board, then you have the imagePASS controller. This device requires a different driver to the PS v1.70 and PPD v2.x you are currently using. It also requires a queue name of 'print' or 'direct' (or 'hold' if you don't want the job to print) and it must be entered in lower case.
Since it sounds like there are PC's on the network, have a look at their printer setup and see which driver they are using. You can also check their port config to see how they are connecting.
If the iR C3220 doesn't have the imagePASS print controller and the PC users have the PCL5c driver installed, then you may find that the iR C3220 doesn't have the PS option - it may be PCL5c only. The easiest way to tell is to open the printers web page (called RUI) by entering the printers IP address in your browser of choice. With the default page open, select Additional Functions and then Custom Settings (you may be prompted for a system ID & password). If you get past this the new view will show if you have PS as well as PCL. If there is no PS, then you will have to look at installing the latest version of Gutenprint and selecting Generic PCL5c as your 'ppd'.
If the PS option is installed, then the v1.70 driver should be okay, although there is a trick to adding it. In the Printer Setup Utility, after clicking Add, select More Printers and then Canon IP (PS). In the new window input the IP address and a queue name of LP. When you click Add the copier is queried by the driver to determine what model it is, meaning that once it is displayed in the printer list it should show the iR C3220. Given that this didn't happen for you (and if the imagePASS is not being used) then a likely cause can be the disabling of SNMP in the copier setup. You may have to get the IT guys to enable this (or at least explain why it is off).
If you go the other way of manually selecting LPD as the protocol (AppleTalk is not supported by the PS v1.70 driver) then you need to ensure that for the print using you select iR C3220 CanonPS for the ppd. If you see Canon iR C3220, don't use this as it is the wrong ppd for the PS driver - it is there as part of the PPD installer.
If you want to try using the PPD, then you can use AppleTalk but of course this has to be enabled in the copier, and if your the only Mac then it is likely that it is disabled. Again the RUI page can tell you this or you can print a Config page from the copier (I think you go Additional Functions > Report Settings > Network > User Data List).
Hope something above is helpful and if not, please reply back.
Paul

Intel iMac with 10.5.8 - Grey Screen of Death but worse please help!

Okay, this has happened three times now in six months, and I'm about to go out of my mind. Everytime it's a little different but basically:
My iMac becomes unresponsive, whether by a system lock up, or I wake up in the morning (like this morning) to a black screen with the white light still on, as if it were asleep. Nothing I do wakes the computer or otherwise makes it respond, so I hold the power button down for a few seconds and it shuts off.
Now, when I boot up, I get a grey screen with the Apple logo with the spinning black/grey pinwheel.
Inserting a CD does nothing. In fact, now my only install CD of Leopard is stuck in the slot-loading drive. I've tried everything I can to eject it: hold down eject on boot, left mouse button on boot, option on boot, commandoption+pr, command+v, etc. etc. etc.
I'm a software developer for OS X and have extensive hardware knowledge, so I kind of know a bit about what I'm doing.
The iMac will not boot off of a CD. It doesn't even recognize the CD. I have an external USB 2.0 hard drive with a current Time Machine backup, but I don't think those are bootable.
Anyway, in the past, to resolve this issue, I've had to take the iMac apart, put the internal hard drive into an external enclosure, and mount the drive onto my MacBook Pro. Interestingly enough, when I do this the drive mounts perfectly fine and shows all files exactly as they should be. So it's something to do with Leopard destroying it's boot record, or some other system configuration.
Even worse, I cannot simply reinstall Mac OS X from the laptop, because the installer says the hard drive needs to be formatted before an install can occur. So either way I'm losing all my data (even though as I said I have a current backup).
Well this time I haven't taken it apart yet. But the install CD is stuck in the drive. Even if I got the hard drive out, and mounted on my MacBook, my other install CD is too damaged to use, so I MUST get this CD out of the iMac.
My questions are:
What do you do when the grey screen of death occurs, and the computer won't even boot off of the CD?
What do you do to get a CD stuck in an iMac out? Especially when the iMac is in the grey screen of death mode?
What in the world is causing this to happen EVERY 3-6 MONTHS??!
Someone please help... I'm going insane.

Hi I am having the identical problem with my 24" intel iMac 2007..... Did you ever figure out what the problem was? I'm on round 3 now and with a completely blank grey screen and it won't start up from the disk 1.. I also have diskwarrior and techtool pro as well as the osx leopard and snow leopard disk... The HD is new.. Replaced by apple 3 months ago.. Don't know the cause the first time this happened about 9 months ago.. 2nd time, 6 months ago it never rebooted from the office for mac 2008 critical update... Did a clean install after backing up to TC... Took it to apple replaced HD even though it appeared ok, they checked all hardware and I ran techtool pro daily ever since. Last week software update had several updates avail. Office for mac being one of them.. I updated and have never booted since.. . I swear to never ever use another Microsoft product as long as I live if I can just fix this once more... Help me please

Intel imac won't boot with usb powered hub attached

My intel imac has started to not boot with a powered (have tried a variety of them) attached. Just stops at the white screen. Also, after I attach the hubs (2, both powered) the computer got into spurts when it just kicks everything attached to the hubs off saying that something pulled too much power. At other times it is fine with the same set up. I've tried resetting the PRam but it didn't make any difference.
I see from other postings that this isn't too uncommon, but didn't see any fix.
Thanks

Can you determine if it is just one of the hubs? Resetting the PRAM probably didn't have anything to do with this problem but the SMC controls the power, try this reset:
SMC RESET
http://support.apple.com/kb/HT3964
Shut down the computer.
Unplug the computer's power cord and ALL peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
The 5 second timing is important to a successful reset.

Is Intel iMac (white) harddrive interchangable with white iMac G5?

Similar Messages

Maybe you are looking for