Is it possible for a process to participate in two separate clusters

Is it possible for a process to participate in two separate clusters? For example if our application would like to get market data in one cluster that has a separate multicast address, and post order in another.

The easiest way for a client to access multiple clusters is via Coherence*Extend:
     http://wiki.tangosol.com/display/COH33UG/Configuring+and+Using+Coherence*Extend
     The client would not be a member of the cluster, instead it would connect to the cluster via a proxy node that is in the cluster. Using <remote-cache-scheme>, you can configure a cache to point to one proxy (in cluster A) and have another cache point to another proxy (in cluster B.)
     Thanks,
     Patrick Peralta

Similar Messages

Is it possible for me to have CC on two computers at once with my current licensing? I would like to have it on my desktop and my laptop.

Is it possible for me to have CC on two computers at once with my current licensing? I would like to have it on my desktop and my laptop.

Each CC allows you to activate it two times, it can be on the same computer or different.
So you can install &a activate it on two computers but as End user license agreement you can not work on them simultaneously.
http://www.adobe.com/legal/licenses-terms.html
Creative Cloud Help | Creative Cloud / Common Questions
http://helpx.adobe.com/creative-cloud/faq.html
Regards
Rajshree

Is it possible to store your itunes library in two separate locations?

I currently have my entire iTunes library on a My Passport external hard-drive but I would also like to store my iTunes library on a separate My Book external hard-drive. The My Book is 2TB and I essentially wanted to store the movies on that external; not necessarily the movies and music currently in iTunes. Is there a way I can keep my iTunes library on the My Passport but also have it on the My Book external hard-drive as well?

Move one of the folders in the iTunes library to the external drive in the Finder, and with iTunes not running, open the Terminal in the /Applications/Utilities/ folder. Enter the following:
ln -s
The l in the command is a lowercase L. Drag the folder on the external drive into the Terminal window followed by the folder on the laptop drive. Next, drag the folder on the laptop drive to the desktop in the Finder and press Enter in the Terminal window. Reopen iTunes and verify that everything works properly; when this has been done, delete the original folder from the laptop drive's desktop.
(12418)

How can I define the possible entries for "invoicing process" at fkkinv_ma?

At the transaction code fkkinv_ma, I fill in the fields "Date ID" and "Identification" but I have a problem with the field of "Invoicing Process". When I psh theF4 button, there comes no search help. What should I do? Should I define the possible entries first? If I should, how can I define the possible entries for "invoicing process"? How is the customization done?
Thanks in advance for the answers.

You have to define them in the IMG
Financial Accounting (new)
Contract Account Recievable and Payable
Business Transactions
Invoicing
Invoice Types
You have to set up a number range, decide what type of Financial transactions should not be invoiced -- like Dunning Charges
then you have to have a developer create the form and form class of invoice.

Show information for BPM process instances to possible future assignees

Hi all,
My environment is 11.1.1.4.
I want to develop an ADF application that shows users information for BPM process instances which will possibly produce a user task assigned to them in the future.
What I have done is
1. Get BPMAppRole from the user name.
2. Get the list of CompositeInstance with STATE_RUNNING from the BPM process name obtained from the BPMAppRole.getName().
From the list of CompositeInstance, I have to extract the instances that will possibly produce a user task assigned to the user in the future.
But I have no idea how to do this.
Maybe my current approach is totally incorrect.
Please help!
Regards,
Kenji

Hi,
By chance I found a method that you can use:
oracle.bpel.services.workflow.query.model.TaskSequence getTaskSequence(oracle.bpel.services.workflow.verification.IWorkflowContext p1, oracle.bpel.services.workflow.task.model.Task p2, java.util.List p3, java.util.List p4, java.util.List p5, boolean p6) { }
getTaskSequence might help you. This is under ITaskQueryService interface.
HTH.

Error in bdc (Background processing not possible for material)

Background processing not possible for material with serial number reqmt
Message no. M7419
Diagnosis
You tried to enter the count for a material managed with serial numbers using background processing. This function is not supported.
Procedure
Use the transaction 'Enter inventory count' (MI04) to enter the count for materials managed with serial numbers.

Can You Run this BDC in Foreground Mode
I am doubtfull for that.
please check
Gaurav Sood

Parallel datapackage processing possible for file datasource in NW2004s

Hi,
We have a huge flatfile which is quite slow in loading due to the fact that it processes all datapackages serially (25.000 records each). Is it possible at all to do this in parallel like it is possible for R/3 datasources via the control parameters option (table roidocprms- ? According to the help, the customizing RSCUSTV6 is the one to be used for flatfiles but this doens't include the number of parallel processes.
If not, would it be better for the performance to use bigger package seizes for flatfiles ?
thanks

Just to clarify :
In this case we load via the old methods (infosources/update rules) so no usage of transformations and DTP's.

Is it possible to config memory size for a process?

Dear experts,
I would like to control the memory size assigned for a process on Solaris 9. Can i config memory size assigned for process??
Many thanks,
Shun

You can use ulimit/limit to assign a bound on the amount of space that a process and its children can allocate.
I'm not sure if that's what you're asking though.
Darren

Is it possible for Apple to unlock my iPhone?

My iPhone apparently has a SimLock for Vodafone Germany. My two years of contracet with Vodafone Germany (required minimum time to be able to get it unlocked from Vodafone) are over.
Now my problem is as I had my iPhone swaped at the AppleStore so Vodafone can not unlock my iPhone because it is not an IMEI that they have in their systhem. Apple tells me that I have to talk to Vodafone. Now what Vodafone suggested is that they send me a certificat saying that I can have my iPhone unlocked and that I go do it at the AppleStore if that is possible. So that is actually my question: is it possible for me to get y iPhone unlocked at the AppleStore with the certificat from Vodafone?
Thanks for any help
And one other thing... I was on an Apple site (I can not find it anymore) where I was in contact with an Apple support member via Chat. Does anyone know how to get to that site?
Thanks again

Apple cannot unlock your iPhone via any "certificate". The only way it works is that the carrier generates an electronic unlock authorization which goes though Apple's automated process to get sent to iTunes on your computer. Sorry, but Vodaphone will have to figure out the IMEI issue on their end, and if they can't, then you probably will not be able to get your iPhone unlocked.
Regards.

Is It possible for a Non Shippable Inventory Item sold in OM update INVENTORY Levels

Is It possible for a Non Shippable Inventory Item sold in OM update INVENTORY Levels?
I have created an Item which is inventory tracked but not shippable. Customer & Internally Ordered. But upon booking the Sales Order, the INVENTORY level of the said item does not get updated with the sale.
How can i make it update INVENTORY without going thru shipping module?
thanks.

Hi Jay
How are you.
Yes, in process sampling only.
Is it not neccessary to have a wip validity rule for wip products in the specs. I am able to create samples for wip products with inventory validity rule.
Regards
Prem.

Is it possible for SA540 to work in transparent bridge mode?

Hi all,
I've been considering to use a Cisco SA540 in an industrial project; please consider Scenario 1 and 2 files attached (bear with me - I'm an engineer, not an artist).
All networks mentioned in both scenarios are regular and well known Ethernet TCP/IP networks. The Corporate Network and Automation Network (including the DMZ) are in different subnets. The Corporate Network is the biggest one, similar to any company's corporate network you all know. The Automation Network exists for the purpose of operating and maintaining the industry process; it's smaller but highly critical. Only specific staff (automation staff and dedicated operators) have access to it. Although many devices and networks in the Automation Network are industry specific - not so well known, a small segment of it is plain Ethernet TCP/IP, as I've already stated. The Automation Network has a DMZ, where we lay servers that provide industry process information for the Corporate Network.
Scenario 2 may look at a first glance the best option, since it's simpler, doesn't require another router and benefits from Cisco SA540 support for both a LAN and a DMZ. The problem with Scenario 2 is the following:
Since both networks are maintained by different teams under different management, TI staff would have absolute control over the Cisco SA540. This way automation staff could not grant that the Automation Network is really protected from the Corporate Network.
TI staff may even demand for another device to interface with the Automation Network - which is not Cisco SA540, since they rule everything that lives in the Corporate Network. In this case, I have my hands tied!
Scenario 1 solves the above problems. Since automation would have absolute control over the Cisco SA540, they could grant security for the Automation Network (except for DMZ, but that's the reason why it is called a DMZ!). TI staff could ask for any router they prefer to interface with the DMZ, I would never mind about it.
Considering the above, I will probably be forced to adopt Scenario 1 instead of Scenario 2. So here comes my question: is it possible for Cisco SA540 to work with the same subnet for both WAN and LAN interfaces (in Scenario 1, no DMZ interface is required)? In other words, is it possible for Cisco SA540 to work in transparent bridge mode? I've been through all of the Cisco SA540 Administration Manual and as far as I could understand, routing is not an option - it is demanding.
Although I understand I could adopt Scenario 1 and still have different subnets for DMZ and the rest of the Automation Network by connecting the DMZ to the WAN interface and the rest of the Automation Network to the LAN interface in the Cisco SA540, I believe it's not worth the effort. The Automation Network is so small and we do all we can to keep it as simple as possible.

Adriano, there is a RV042G, which supports the gig ports and a 800 mbps nat throughput. Here is the datasheet
http://www.cisco.com/en/US/prod/collateral/routers/ps10907/ps9923/ps12262/data_sheet_c78-706724.html
If you are using a DSL connection, the SRP527/547 models may be an alternative. These models support the RFC 1483 Bridges EOA Please note the SRP547 should be 10/100/1000. Also note the SRP521/541 are Fast Ethernet units and they do differ from the SRP527/547. The main selling point of these devices are the FXS/FXO ports. So this may also be a bit of an "unfocused" solution. But it's worth throwing the idea out there!
Here is the admin guide;
http://www.cisco.com/en/US/docs/voice_ip_comm/unified_communications/srp540_series/administration/srp500_AG_2567701.pdf
Here is the datasheet;
http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps10500/data_sheet_c78-550705.pdf

I am able to get color images in the continues shot but when i try to snap a color image which i need for my processing i get only a monocrome image

I have been using lv_vfw.llb VI's for grabbing images from a CREATIVE WEB CAM ,i am able to get color images in the continues shot but when i try to snap a color image which i need for my processing i get only a monocrome image ,i have been trying to play around with the RGB weightings but i am unable to get a color iamge,it shall be of great help if you could help me in doing this as it is urgent for me.Thanks for your help.

vicky,
I am unfamiliar with the lv_vfw.llb, and have not used it before. However, I noticed that you stated that you are able to grab in color, just not snap in color. If this is the case, why not just perform a grab and then extract a single buffer from this grabbed data, which would likely be in color? This seems like a possible solution to the issue that you are seeing.
Other than that, I really don't know enough about the lv_vfw.llb to be of much help on this issue. Hopefully another member of this forum will be able to assist you with this software.
Regards,
Jed R.
Applications Engineer
National Instruments

Goods receipt not possible for delivery 80016425: error code 4 in MIGO

Hi friends,
I created STO from ME21N tr.code(document type:UB), then I created outbound delivery from VL10B tr.code based on STO.
After that, goods issue is made by vl02n.Lastly , when I want to make a goods receipt based on outbound delivery from MIGO
(with mvmt type:101),it gives me error about"Goods receipt not possible for delivery 80016425: error code 4 in MIGO tr.code" .
Take your opinions

Hi,
Error 4 indicates there is/are no delivery item/items.
Check following options:
option-1--->Check material number extended to the both plants with storage locations
option-2--->Check the material received already WRT the delivery
option-3---> Check confirmation control key in material that needed in creation of an inbound delivery to have GR process
option-4--->Check The latest goods receipt date in STO
option-5--->Check(done any setting) if any billing to be done after PGI and then can do GR WRT delivery
Regards,
Biju K

Goods receipt not possible for outbound delivery...error code 4

hi ,
i created a stock transfer order.
an outbound delivery was created.
pgi was done..
gr was done against this delivery.
but this gr was then cancelled.
now when i am doing gr against this outbound delivery.
i get this eror message.
Goods receipt not possible for delivery 1134930096: error code 4
i have then reversed PGI of this delivery in vl09.
then did PGI again.
but still same error message.
please help.
regards
shashank

Hi,
When system gave you the message with the error code 4, you can click on the message.
There may be various reasons for the error of GRn agaist delivery -
1) GRN already posted against the Delivery
2) Delivery is deleted
3) Delivery is currently processed by another user
System gives you the detailed analysis aling with the codes. You can check what reason is mentioned for reason code 4.
Regards,
Prashant

Serial numbers for subcontracting process

Hello Experts,
We are using SAP ECC 6.0 and trying to implement the subcontracting process with serial numbers. This scenario is focused on those materials that we need to keep track on how many times it has gone to repair (for example, a motor) by specific item. Suppose there's a material called "Material A". However, there are MANY "Motor A"'s, and thus, the need for serial number to keep track on the number of repairs each one has had.
So, having said that, the scenario is working so far. However, the user CAN'T type in the serial number of the material at the REQUISITION LEVEL. This can be done at the PO level and at the goods receipt level.
This brings a problem since the Purchasing dept. doesn't know the serial number. This information is known by the user, but there's "serial number" functionality in the requisition. Is there a configuration for this? Could it be possible for the serial number to be in the requisition and then inherit it to the PO?
We want this in order to automate the process.
The configuration we made was in the "Plant Maintenance and Customer Service" section, using procedures MMSL "Maintain goods receipt and issue doc." and POSL "Serial numbers in purchase orders". There's no procedure for purchase requisitions. If this can be also done from a Work Order, that will be just fine.
Let me know if it is possible or if you have any idea on how to do this.
Regards,
Gilberto Gallardo.

Hi,
Serial no can be used for the following business transactions.
1. Goods Receipt/Goods isssue and other inventory postings.
2.sales orders and delivery notes
3.maintenance orders
4.production orders.
Settings:
1. create a serial number profile in customising.
2. Assign the serial number profile in the material master record in work
scheduling view for fert and raw material in plant data / stor2 view..
Business procedures may be assigned in configuration to a serial number profile.
The assignment to the serial number profile determines if serial numbers are required , can be assigned, must be assigned,are assigned automatically
MMSL : Goods issue , receipts,stockj transfers,stock transport orders
Thanks
nandha

Is it possible for a process to participate in two separate clusters

Similar Messages

Maybe you are looking for