Is it possible to add some sort of physics to this?

I have this game where you have to click on tiles, if there is 3 or more then they break and you get points pretty basic.
But I want to add physics to it to make it more interesting. I know i can have it so if i export if for actionscript with the namve DynamicCircleShape then it would be a dynamic circle. But the objects allready have classes exported to them, so is there any other way? Im not completely set on box 2d, If there is a way to use in flash physocs then great!

Well im definately considering doing it, but i don't know where to start really.
I was hoping i could cheat or something by having a movieclip exported with the box2D class, then have a movieclip within that having another export with the other export..

Similar Messages

Is it possible to add some offset on the Y-Scale of a graph when autoscale mode is enabled.

Hi All,
I am plotting on a waveform graph with autoscale mode enabled. I want to have some offset on the upper and lower side of the Y-Scale. Is there any way of implementing this.
Thanks in advance,
Cooldude
Solved!
Go to Solution.

The only way that came to my mind is to do the autoscale by your own:
-Find the min and max (ready vi for that)
-Add a percentage of the range to min and max
-Optional coerce the new min,max accordingly to a round number (depending on log(range) )
-Set Scale with properties
Another way:
Add a plot with same data (or only the min and max point) with tranparent colour and multiply that data with 1.xx (xx percentage additional range)
Message Edited by Henrik Volkers on 09-18-2009 12:40 PM
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

I have a macbook pro retina, is it possible to use the screen for my xbox, I know the hdmi is an output not an input but didn't know if there was some sort of workaround for this?

would really like to play xbox on my macbook pro retina screen, please help?!

Outputs yes but not input. You might be able to find some kind of video input device but that would most likely have to run inside an app and would cost much more than a small monitor for your Xbox.

APPLESTUDIO DISPLAY 17"(ADC/CRT) - possible to add external power?

Hi there,
is it possible to add some external power to this monitor(12v)?
APPLESTUDIO DISPLAY 17"(ADC/CRT) :
http://www.everymac.com/monitors/apple/studiocinema/specs/apple_studio_display_17cl.html
Are there any technical schematics to download?
In theory one should find the power cables that is normally integrated in the ADC cable?
Many thanks,
CF

The best solution would to buy a new graphics card that can support 2 inputs. Certain applications/tasks (like video editing) don't handle 2nd card well. So I have never ran a PCI card for my second monitor. You'll have to specify what you intend to do with your graphics card for better recomendations of cards that just aren't overkill for your usage. All of my systems use Dr bott connectors & I have never had a problem with them. Depending on what card you buy you may need one or two of the ADC to DVI connectors on the site. Best of luck
http://www.drbott.com/prod/db.lasso?code=0111-DVAD

Is it possible to add a new Technology Scope? JDev 10.1.3.3.

Hi,
I'm trying to create a new application template in JDeveloper for other developers to use. I'd like to add some custom written jars to this template along with standard technology scopes like JSF and ADF BC. I can't seem to see how to create a brand new technology scope that would include these custom written jars.
Is this possible? If not, is there another way of accomplishing this?
Thanks,
Paul.

To my knowledge, you cannot add new Technology scope for JDeveloper. What you could do is goto Application -> Default Project properties -> Libraries -> Add new .jar files
regards,
~Krithika

How can I add some fields with LSMW standard program(Direct methods)

Is this possible to add some fields with LSMW standard program?I like to upload data for MM01 using LSMW direct method,but some fields are not in standard program.How can I solve this problem?kindly help me pls.....

Hi
I think this should be possible. While doing LSMW, when the first record is uploaded system reads the fields ans stores them.
Regards]
Aravind

Need add some T.codes in APB_LAUNCHPAD

Hello Experts,
I have one strandard portal application is there. In this application they created Tranction links. If i click on one link it will open SAP report Program. (i.e, for this link they configured T.code).
Here my Problem is i want some more T.code in this Portal Application. Here they are using WEBDYNPRO Component name is APB_LAUNCHPAD.
Can you tell me how can i add some more T.code fo this application. Is there any Table is there?
Regards,
Sri

Check this:
link: [ABAP Launch Pad|http://help.sap.com/saphelp_ppm50/helpdata/en/45/de6583f81c5591e10000000a1553f7/content.htm]

How do I get firefox to display images clearly? I've got Windows 2000 Pro and Firefox 3.6.6. Internet Explorer shows images clearly, so I'm sure I have the correct graphics driver. Do I need a plugin or add-on of some sort? When I go to "updates", it

When I use Firefox the images and logos don't show up clearly/correctly. I'm using Windows 2000 Pro. and just installed Firefox 3.6.6. I'm sure I have the right graphics driver as I'm able to see the images and logos clearly in Internet Explorer. I only have the "default plugin 1.0.0.15" installed. I'm thinking that I'm missing a plugin or add-on of some sort, but I'm not sure which one(s). When I go to "updates" it says there were no updates available. When I go to "Add-ons" it gives a list of Add-ons but I'm not sure which would help my issue. Any help would be appreciated.:)
== This happened ==
Every time Firefox opened
== I decided to Download and Use Firefox on this computer. I was using IE before, and it works fine. ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

Firefox works fine on Windows 2000 SP4 for me.
Any chance you have a dial-up connection that uses a web accelerator to speed the loading of content?

I no longer get my bookmarks in my dropdown menu on my yahoo tool bar plus i cannot add or delete apps on my yahoo toolbar.i believe this all started w/ a firefox upgrade of some sort.

i no longer get my bookmarks in my drop down menu on my yahoo tool bar plus i cannot add or delete apps on my yahoo toolbar. i have emailed yahoo and they said it is not their trouble & to call at&t and i called att and they said not their trouble go back to yahoo .......but i believe this all started w/ a firefox upgrade of some sort.

I know you can't help with my Yahoo problem, however, apparently at some time in the past I have went to the Sync and tried to figure it out on both my laptop and my desktop, because I have the long snyc key information. However, when I go to try to sync both computers I never get the box to enter that key on either one. That is my problem. So should I try and get a new sync key and see if that works.

Is it possible to add an 'Upload Image' option to a form in Muse CC 2014

Hi,
Im building a website via Muse and BC for a movie star client who has images of herself tattooed by ardent fans. Basically, the website is a gallery for fans showcasing the very best in inked images of herself on their skin. On the contact form in Muse, I'd like to add an option somewhere for the client to upload an image of their own tattoo to be included in the gallery (which will be added/edited manually in PS).
Is this possible without too much xtra code? Or, will I need a single page where folks can upload their image to us which will include some sort of widget? I'd like to be able to manage it though without giving out an email address if possible?
Any help most appreciated.
Cheers

Hi Rohit, thank you for that.
I do have a FormsCentral account and notice on a tutorial I found on AdobeTV, that you can specify file types. This is something I'd like to be able to do as they will be images so PSD, png, jpg etc. But just looking over on BC I see that you can add 'Attach File 250mb limit' to a form (as you advised) but I can't see where you can limit to type? Is it in there?
Finally, will the image be uploaded to the BC server-side (if I use BC form creation method and not FormsCentral) in some type of assets folder or, will the form simply send any clients uploaded images to the specified email account within the form?
Whoops, final finally: Do you think that it is better to use FormsCentral for this or BC? I want the page to be customised so the form sits on some b-ground artwork. The client has a famous image where she is holding a burning card invite. I have already used this and overlaid a contact form in Muse which has worked really well, so I want to create a (hidden from menu) uploaded page looking exactly the same and this page will be linked directly from the other Contact page, driving any fans there who wish to then upload an image rather than just send a general contact. I hope that makes sense?
I guess what Im trying to find out is wether FormsCentral data gets fed back to BC in the same way a BC-created form would be seen in the dashboard area.
Thanks Rohit

Is it possible to add a user using the RESTful Web Services SDK

Others have asked before about user management features in the RESTful Web Services SDK. However I can find no answers or links which provide an answer to the question 'Is it possible to add a user using the BI 4.1 SP2 RESTful Web Services SDK'?
Any help would be appreciated.
Regards,
Steve

Hi Steve
Unfortunately, not possible. The BI RESTful can only get "stuff" that is already there. I suppose this would fall under some sort of "Object Creation" API and that is not there. Yet. Rumors abound, but nothing firm. Just as a BTW.; the Business Intelligence platform RESTful Web Service Developer Guide 4.1 is here:
http://help.sap.com/businessobject/product_guides/sbo41/en/sbo41_bip_rest_ws_en.pdf
SAP Web Intelligence RESTful web service SDK User Guide, SAP BusinessObjects Business Intelligence platform 4.1
SAP Crystal Reports RESTful web services - SAP Crystal Reports RESTful web services
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Is it possible to add or change OCR text in a batch process?

Hello,
This is my first submission. Really hope you can help as if there's a solution to this it will significantly help our business.
Is it possible to 'batch process' the adding or changing of OCR text in a PDF?
This might sound like a strange process but let me explain what we do:
1. We scan old, handwritten books and registers. Typically these registers contain lists of information. Each page will be scanned to a filename like pge01.jpg, pge02.jpg, pge03.jpg etc.
2. We transcribe the content of each page. Each page will contain mulitple records (i.e. 20 records) typical fields might be:
Unique ID
Surname
Forename
Year
Address
Filename (i.e. pge02.jpg)
3. We provide this content back within database driven software so that when a user performs a search on say 'Surname=Jones' & 'Year=1945' then all of the scanned pages that match that contains handwritten text that matches that search criteria is displayed in a list. The user can then click on a search result and see the scanned page containing that record.
Rather than provide database driven software, we'd simply like to produce a standard PDF file. Each page within the PDF will show each of the scanned pages (pge01.jpg, pge02.jpg, pge03.jpg etc.). But where you would normally store the 'ocr recognised text' behind each image, we would like to show our transcribed content.
If this is possible, then I realise that it's likely that you can't do field searches (i.e. 'Surname=Jones' & 'Year=1945') but at the very least I'd be able to type 'Jones' in to the search box and it would find all pages that contained the transcribed word 'jones'.
If it's possible to add the transcribed data as 'ocrd text' then is it possible to do it in some sort of batch process? We scan lots of big books and capture millions of records - so doing it manually is not an option.
Any help that anyone can provide will be hugely appreciated.
Thanks,
Paul

I don't think it's possible to manually add OCRd text, but you can add form
fields with the text in them. And yes, it is possible to search the content
of form fields, using a script.

Two tabs now open, one telling me I'm updated, second for some sort of addon checker

First tab says congratulation Firefox is updated, I already know that, now it opens this tab each time I open my browser.
Second tab is some sort of addon checker thingy.
Thought it might have happened with the upgrade to 16 from 15, down graded, happens there as well. So now back to 16 and still have the problem, except now I have this first tab opening as well.

Did you try to delete the prefs.js file in case there is a problem with some prefs?
It is also possible that there is a problem with the file(s) that store the extensions registry.
Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
*https://support.mozilla.org/kb/Profiles
New files will be created when required.
See "Corrupt extension files":
*http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
*https://support.mozilla.org/kb/Unable+to+install+add-ons
If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to check if there is a compatibility update available.
If this hasn't helped then also try to delete the addons.sqlite file.

TS3276 I have recently had a problem with one of my hotmail accounts, some sort of virus sending random emails to people in my address book. Hotmail advised me to change my password for that account, which I did. Why won't mail recognise the new password?

I have recently had a problem with one of my hotmail accounts, some sort of virus sending random emails from my address book. Hotmail advised me to delete all contacts and change the password for that account, which I did on my laptop running windows XP. The change was successful and I was able to send and receive emails with no problem. I then had to change the account password on my iPhone 4s, which I did and it too was successful but when I came to change the password on my iMac, running the latest version of Lion it would not recognise the new password. I have tried to remove the account details and re-install but every time I go to add new account my old details are in the box. This is very frustrating as I use my iMac for all my profects and I need to access my email. Please help.

hi guys,
I had already deleted all reference to the hotmail account in question from the keychain access app, I have also tried to delete and re-instal the account details from within mail. The icon in the side bar dissapears but when I go to Add Account, the old account details are in the new account box. I then input my new password but am told that the server does not recognise it. If I access hotmail via google on the iMac I can get into my account with no problems. I am thinking there must be some other form of security system within the mac software that is blocking the new password. This is driving me nuts. I have been trying to resolve this for the last two days. Thank you for your advise anyway.

I believe that I have a keylogger or some sort of spyware installed on my mac, please help!

I followed this procedure to check my files:
Please read this whole message before doing anything.
The following procedure will help whether your system has been modified. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.
I believe that I have a keylogger or some sort of spyware installed on my mac, please help!
POST YOUR OUTPUT FOR REVIEW/COMMENT.
After running these commands, here is the output. Can you please tell me if you see anything here. I would be so grateful.
com.oxsemi.driver.OxsemiDeviceType00 (1.28.13)
at.obdev.nke.LittleSnitch (4052)
Password:
com.wdc.WDSmartWareServer
com.wdc.WDDMservice
com.sierrawireless.SwitchTool
com.oracle.java.JavaUpdateHelper
com.oracle.java.Helper-Tool
com.microsoft.office.licensing.helper
com.lacie.desktopmanager.service
com.google.keystone.daemon
com.adobe.fpsaud
at.obdev.littlesnitchd
jp.buffalo.NASPower
com.oracle.java.Java-Updater
com.lacie.eventsactions.launcher.agent
com.hp.messagecenter.launcher
com.hp.devicemonitor
com.google.keystone.system.agent
at.obdev.LittleSnitchUIAgent
com.nds.pcshow.uninstall
com.nds.pcshow
com.facebook.videochat.thomasbrown.updater
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
com.adobe.AAM.Scheduler-1.0
LaCie DiscRecording/LaCie DiscRecording.pkg:
Contents
/Library/Address Book Plug-Ins:
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
EWSMac.framework
HPDeviceModel.framework
HPPml.framework
HPScan.framework
HPServicesInterface.framework
HPSmartPrint.framework
HPSmartX.framework
NyxAudioAnalysis.framework
PluginManager.framework
Snapfish.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
Flash Player.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
o1dbrowserplugin.plugin
/Library/Keyboard Layouts:
/Library/LaunchAgents:
at.obdev.LittleSnitchUIAgent.plist
com.adobe.AAM.Updater-1.0.plist
com.google.keystone.agent.plist
com.hp.devicemonitor.plist
com.hp.messagecenter.launcher.plist
com.lacie.eventsactions.launcher.agent.plist
com.oracle.java.Java-Updater.plist
jp.buffalo.NASPower.plist
jp.buffalo.NASPower_pla.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.fpsaud.plist
com.apple.remotepairtool.plist
com.google.keystone.daemon.plist
com.lacie.desktopmanager.service.plist
com.microsoft.office.licensing.helper.plist
com.oracle.java.Helper-Tool.plist
com.oracle.java.JavaUpdateHelper.plist
com.sierrawireless.SwitchTool.plist
com.wdc.WDDMservice.plist
com.wdc.WDSmartWareServer.plist
/Library/PreferencePanes:
Flash Player.prefPane
HP Scanjet.prefPane
JavaControlPanel.prefPane
/Library/PrivilegedHelperTools:
.DS_Store
NasNavigator2.app
com.microsoft.office.licensing.helper
com.oracle.java.JavaUpdateHelper
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
/Library/Spotlight:
GBSpotlightImporter.mdimporter
Microsoft Entourage.mdimporter
Microsoft Office.mdimporter
iWeb.mdimporter
iWork.mdimporter
/Library/StartupItems:
ChmodBPF
HP IO
LocSvc
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
04b-08.suit
Arial
Brush Script
Times New Roman
Verdana
Wingdings
Wingdings 2
Wingdings 3
encodings.dir
fonts.dir
fonts.list
fonts.scale
Library/Frameworks:
EWSMac.framework
Library/Internet Plug-Ins:
FacebookVideoCalling.bundle
Move-Media-Player.plugin
PlayerPlugin.bundle
fbplugin_1_0_3.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.facebook.videochat.thomasbrown.plist
com.nds.pcshow.plist
com.nds.pcshow.uninstall.plist
Library/PreferencePanes:
Opera Preferences
TomTomHOMERunner, LDMStatusItem, apple-scc-20130209-112927
thank you much for helping...sincerely. tlenbro.

I followed this procedure to check my files:
Please read this whole message before doing anything.
The following procedure will help whether your system has been modified. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.
I believe that I have a keylogger or some sort of spyware installed on my mac, please help!
POST YOUR OUTPUT FOR REVIEW/COMMENT.
After running these commands, here is the output. Can you please tell me if you see anything here. I would be so grateful.
com.oxsemi.driver.OxsemiDeviceType00 (1.28.13)
at.obdev.nke.LittleSnitch (4052)
Password:
com.wdc.WDSmartWareServer
com.wdc.WDDMservice
com.sierrawireless.SwitchTool
com.oracle.java.JavaUpdateHelper
com.oracle.java.Helper-Tool
com.microsoft.office.licensing.helper
com.lacie.desktopmanager.service
com.google.keystone.daemon
com.adobe.fpsaud
at.obdev.littlesnitchd
jp.buffalo.NASPower
com.oracle.java.Java-Updater
com.lacie.eventsactions.launcher.agent
com.hp.messagecenter.launcher
com.hp.devicemonitor
com.google.keystone.system.agent
at.obdev.LittleSnitchUIAgent
com.nds.pcshow.uninstall
com.nds.pcshow
com.facebook.videochat.thomasbrown.updater
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
com.adobe.AAM.Scheduler-1.0
LaCie DiscRecording/LaCie DiscRecording.pkg:
Contents
/Library/Address Book Plug-Ins:
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
EWSMac.framework
HPDeviceModel.framework
HPPml.framework
HPScan.framework
HPServicesInterface.framework
HPSmartPrint.framework
HPSmartX.framework
NyxAudioAnalysis.framework
PluginManager.framework
Snapfish.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
iTunesLibrary.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
Flash Player.plugin
JavaAppletPlugin.plugin
Quartz Composer.webplugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
SharePointWebKitPlugin.webplugin
Silverlight.plugin
flashplayer.xpt
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
npgtpo3dautoplugin.plugin
nsIQTScriptablePlugin.xpt
o1dbrowserplugin.plugin
/Library/Keyboard Layouts:
/Library/LaunchAgents:
at.obdev.LittleSnitchUIAgent.plist
com.adobe.AAM.Updater-1.0.plist
com.google.keystone.agent.plist
com.hp.devicemonitor.plist
com.hp.messagecenter.launcher.plist
com.lacie.eventsactions.launcher.agent.plist
com.oracle.java.Java-Updater.plist
jp.buffalo.NASPower.plist
jp.buffalo.NASPower_pla.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.fpsaud.plist
com.apple.remotepairtool.plist
com.google.keystone.daemon.plist
com.lacie.desktopmanager.service.plist
com.microsoft.office.licensing.helper.plist
com.oracle.java.Helper-Tool.plist
com.oracle.java.JavaUpdateHelper.plist
com.sierrawireless.SwitchTool.plist
com.wdc.WDDMservice.plist
com.wdc.WDSmartWareServer.plist
/Library/PreferencePanes:
Flash Player.prefPane
HP Scanjet.prefPane
JavaControlPanel.prefPane
/Library/PrivilegedHelperTools:
.DS_Store
NasNavigator2.app
com.microsoft.office.licensing.helper
com.oracle.java.JavaUpdateHelper
/Library/QuickLook:
GBQLGenerator.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
AppleIntermediateCodec.component
AppleMPEG2Codec.component
/Library/ScriptingAdditions:
/Library/Spotlight:
GBSpotlightImporter.mdimporter
Microsoft Entourage.mdimporter
Microsoft Office.mdimporter
iWeb.mdimporter
iWork.mdimporter
/Library/StartupItems:
ChmodBPF
HP IO
LocSvc
/etc/mach_init.d:
/etc/mach_init_per_login_session.d:
/etc/mach_init_per_user.d:
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Fonts:
04b-08.suit
Arial
Brush Script
Times New Roman
Verdana
Wingdings
Wingdings 2
Wingdings 3
encodings.dir
fonts.dir
fonts.list
fonts.scale
Library/Frameworks:
EWSMac.framework
Library/Internet Plug-Ins:
FacebookVideoCalling.bundle
Move-Media-Player.plugin
PlayerPlugin.bundle
fbplugin_1_0_3.plugin
Library/Keyboard Layouts:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.facebook.videochat.thomasbrown.plist
com.nds.pcshow.plist
com.nds.pcshow.uninstall.plist
Library/PreferencePanes:
Opera Preferences
TomTomHOMERunner, LDMStatusItem, apple-scc-20130209-112927
thank you much for helping...sincerely. tlenbro.

Is it possible to add some sort of physics to this?

Similar Messages

Maybe you are looking for