Is it possible to change the number of rows while printing a contact sheet in Iphoto? Please help

Hi guys, I am struggling to find out how to change the number of rows on a contact sheet on Iphoto , i have selected my photos and i want it to print 6 photos on each page however I am not able to do it.      Please help me out, im a Art student and i need to submit my contact sheets for an assignment  Thanks in advance guys !!!!!

I don't think you can do that with the Contact Sheet layout.  If you have Pages or a 3rd party image editor that supports layers you can do what you want.  Or try the demo version of OmniGraffle for Mac It will run fully operational for 14 days. 

Similar Messages

  • Is it possible to change the number of rows to be displayed in adf query ?

    Hello,
    is it possible to change the number of rows that are displayed in an adf query similar to an adf form ?
    I need to display approx 5 rows per column instead of displaying all the fields in a single column ? Thanks.

    Thanks , how do you add in the code ,is it something like follows :
    <af:query id="qryId1" headerText="Search" disclosed="true"
                                value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
                                model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
                                queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
                                queryOperationListener="#{bindings.ImplicitViewCriteriaQuery.processQueryOperation}">
                        <af:inputText value="#{bindings.PrtDesc.inputValue}" label="Desc"
                                      required="#{bindings.PrtDesc.hints.mandatory}"
                                      columns="#{bindings.PrtDesc.hints.displayWidth}"
                                      maximumLength="#{bindings.PrtDesc.hints.precision}"
                                      shortDesc="#{bindings.PrtDesc.hints.tooltip}" id="it3">
                          <f:validator binding="#{bindings.PrtDesc.validator}"/>
                        </af:inputText>
                      <af:column>
                       <af:outputtext/>
                        <af:outputtext/>
                     </af:column>
                      </af:query>

  • Is it possible to change the number of weeks to be displayed in the month view in calendar (mavericks)?

    I'd like to know if it's possible to change the number of weeks to be displayed in the month view in calendar? Thanks!

    No.
    There are up to six calendar weeks that might be used to display the 31 possible days in a month.
    So the month view displays six weeks.

  • How to change the number displaying rows in a table

    Hi all,
    i have a table for resources in Debrief Work order (Standard Screen), we need to change the default displaying rows. inistially it displayed 3 empty rows.
    i tried to change the Records Displayed for the table but it did not affect.
    also it is possible to change the "Add 3 rows" button in the table to add for example 5 rows instead?
    any idea?
    Regards,
    Mahdi Charara

    Hi,
    Through personalization we can do.On standared page top right u will find personalization link.click on the clink next expand all there find apporiate table .Here u will fine reorder button set as u want display and save. then u can see the change.For add row functionality u need to extend the co.

  • I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!

    I have changed default language in the program & have set Language & region in system preferences. My Word (Mac2011) keeps on changing the default language to US english every time I check. Please help!

    If you're having trouble making changes to files that are inside your home folder (represented by a house icon in the sidebar of a Finder window), or if you can't get changes to the settings of an application to stick, then please see below.
    Back up all data.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
    Step 1
    If you have more than one user, and the one in question is not an administrator, then go to Step 2.
    Triple-click anywhere in the following line on this page to select it:
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
    You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password dialog will open. You’re not going to reset a password.
    In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
    Select your username from the menu labeled Select the user account if it's not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • Is it possible to change the number or rings on a phone before voicemail starts

    Is it possible to reduce the amount of rings a call can do before going to voicemail?

    That's controlled by your carrier. Contact them.

  • How do you change the number of rows returned by an advanced datagrid...Only displays 1000 rows....I

    I am using coldfusion to query an oracle table....Query returns approximately 2000 rows, however the max rows the datagrid will display is 1000.  Does anybody know how to change this...THANKS!!

    Thanks so much for your answer that sounds like a good idea...
    I found the answer to my initial problem...In my coldfusion I had set maxrows = 1000.  So the datagrid was always returning 1000 records even when a lot more than that should have been returned...When I removed the maxrows parameter in the coldfusion code, my datagrid was now been populated with the correct number of rows...
    thanks again for your help,
    Ronnie Raigrodski (Aka -- FlexNerd)

  • I am unable to change the preferences on my Premiere Pro CC 2014 program...Please help!

    Hello, I use Premiere Pro CC 2014 on my Mac Computer. I am unable to change the settings in the preference of Premiere Pro. When I change a setting and click "OK" Premiere doesn't respond. I can click cancel and the window closes, but when I click ok the window does not close. Since Premiere doesn't respond when I click ok, any setting that I have changed remains the same. I tried reinstalling the program, but after the installation I still have the same issues. Does anyone have a solution?

    Hi,
    What preferences exactly? Are you trying to change them under Premiere > Preferences? What OS are you on? Can you please attach a screenshot?
    Thanks,
    Rameez

  • Is it possible to change the number of days for a calendar alert?

    It would be nice to be able to give a week or ten days notice for such things as anniverdaries and birthdays.  Especially for persons who are not local.  I can't find a way to this and end up sending cards and gifts that ultimately arrive late.  Very frustating.  Apple wake up here and help with this.

    Do you have an iCloud account?  What system version are you running? Where do you want to make the change?  In your Calendar app on your MacBook or online in your iCloud account?
    OT

  • Hi, I can't put a pontuaction mark in a password to acess one of my accounts (I can't remember the master password, so I can't change the previous one). MacBook Pro 10.6.8 Could you please help me?

    Hi, I can't insert a pontuaction mark in a password (which I did until yesterday) to acess one of my accounts. I don't remember the master password, so I can't change that one. I have a MacBook Pro and 10.6.8. Could you help me, please.

    What I'd do in this situation:
    connect both macs to same LAN
    turn them on
    login to new mac
    go network, find your old mac
    connect using "connect as" button (up right of window)
    use credentials from login you can't access - mean user name and password. If you still can't add that ~ you can copypaste password there from any text editor
    You will get full access to all data of that blocked account - just copy all you need
    Other way:
    connect both macs to same LAN
    turn them on
    login to new mac
    on new mac run "migration assistant" from Utilities folder
    tell there that you want import account data from other mac
    follow instructions of migration assistant
    thus you'll import account to new mac - but probably with filewault enabled and same password, I didn't check this in such situation
    Try first method first )

  • Why does iCal change the time of my events when I import my schedule? PLEASE HELP

    When importing my schedule (from my school website, week by week), I had no problem in September.  Now, something must be screwed up in my iCal, because the same documents are importing 3-4 hours behind my current time zone (Atlantic).  Atlantic time is specified in the files, so it isn't that.  This happens in the guest user as well.
    I turned off time zone support (I feel as though this is what made it stop working, as the default was off and I turned it on around the time it stopped working).  It still doesnt work even with time zone turned off and the time on my computer is set manually (instead of automatically detecting it).  Also, I tried to find the preference file in my library>preferences, but it didn't exact... not one single com.apple.ical plist file in there!!! It seems to work fine from my iphone EXCEPT it creates 2 events for each single event (at the same time) which is rather annoying.
    Anyone know/have any ideas on how to fix this??

    Yeah that was it, I realised straight afterwards (I'm just impatient lol). Thanks anyway

  • How to increase the number of rows to be displayed in BEx Web Analyzer

    hi,
    I am viewing reports using BEx Web analyzer option. It is displaying only 24 rows  of data at a time. How to increase the number of rows? do i need to any kind of settings?
    pls reply.

    Hi,
    I think the standard template in 2004s is named 0ANALYSIS_PATTERN. You can find it in Web Application Designer, open, and search for the technical name. If you want to change the number of rows or columns, you can find this setting near the bottom of the XHTML view of the template:
    <bi:BLOCK_COLUMNS_SIZE value="4" />
    <bi:BLOCK_ROWS_SIZE value="17" />
    Then just save, and ignore the error messages.
    Message was edited by:
            vind Reinsberg

  • Why is the "Number of Rows" for a report seem to be cached in the session?

    When I change the Number of Rows in any given report that this change doesn't immediately take effect. After much poking around and gnashing of teeth -- I found that I have to go into Manage Session State and Remove State for my session before these changes go into effect.
    Can anyone explain why this setting would be stored in the users' session state and why when I login and get a new session_id this setting seems to persist.
    Thanks,
    Jason

    1. if you login with a new session, the pagination should be reset and the new number of rows should be displayes - which version do you use. I just checked on apex.oracle.com and it worked.
    2. You should try using reset pagination option to see what happens.
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
    -------------------------------------------------------------------

  • How do I change the number of plot areas in a Mixed Signal Graph

    How do I *programatically* change the number of plot areas in a Mixed  Signal Graph?  I recognize that the developer can choose to add or  remove a plot area during edit mode but I want to select between 2 or 3 visible plot areas and scale the plot areas appropriately.  Is there a property that tells me how many plot areas (or yscales) there are?  I also need a property that I can write to as to set the number of plot areas available.
    Aside from manually making too many plot areas and then hiding the unneeded plot areas how can I do this?
    Jonathan

    Hello,
    I don't think that is possible - I searched the property and invoke nodes but didn't find something to do that.  This would make a great product suggestion though, which you can submit (it goes directly to R&D) by clicking the word feedback in the bottom left corner of the Contact NI page linked below:
    Contact NI:
    http://sine.ni.com/apps/utf8/nicc.call_me
    Best Regards,
    JLS

  • Is it possible to increase the number of authorised computers with itunes.

    Hi with Apple now selling more devices than ever is it possible to increase the number of authorised computers for sharing on iTunes.
    we have 2 x MBP and a 27" iMac 2 x ipads 3 x ipods and 2 x iphones in the house, we would obviously like to share the one account with all of them and I think that seeing the number has not changed in years yet the number of products able to use. It would make sense to at least double the authorised number.

    You are limited to 5 devices. Maybe Home Sharing offers options

Maybe you are looking for