Is it possible to delete data from a block based on a view?

I have a data block based on a view. I have set the delete allowed property to 'yes' using the object navigator, have set the database permission to allow delete, done a search through all the code to see where the delete_allowed property on the block may be reset in some trigger yet cannot delete records from the block.
Any ideas?

There are at least two/three ways to do this...
Put an on-delete trigger on the block of the view with code something like this...
delete from mytable where mytable_id = :myblock.mytable_id;
...or...
dont do the above and add an instead of trigger to the view in the database. The instead of trigger intercepts the delete statement that would fail and executes code that you write in the trigger to go delete in mytable "instead of" the view.
... or...
if you want to base a block on a procedure.. See this thread... Notice the metalink id in the thread..
Re: Data block based on a procedure..
Message was edited by:
Mark Reichman

Similar Messages

  • Is it possible to delete data selectively from Business content cubes

    Dear Experts,
             Requesting you to help me out to know, is it possible to delete data selectively from Business content cubes.
    When I'm trying to delete selectively from Business content cubes, the background job gets cancelled with ST22 logs stating
    A RAISE statement in the program "SAPLRSDRD" raised the exception  condition "X_MESSAGE".                                                                               
    Since the exception was not intercepted by a superior program, processing was terminated.  
    and i tried  with few more Technical content cubes but the same thing happens.
    Pls let me know how to selectively delete data from Business content cubes if it's possible?.
    Thanks in advance for your favorable assistance.
    Regards,
    Ramesh-Kumar.

    Hi Ramesh,
    Follow below steps for selective deletion:
    1.     Transaction code: Use the Transaction code DELETE_FACTS.
    2.     Generate selective deletion program:
    A report program will be generated of the given name, here .
    3.     Selection screen:
    Take the deletion program u201CZDEL_EPBGu201D to the transaction code SE38 to see/execute the program.
    After executing it will take you to a selection screen:
    As we need to carry out deletion selective on Calendar week, we need to get the screen field for the field Calendar week. For this, click on the Calendar week field and press F1.
    Click on the technical information button (marked in red box above) you will get below screen:
         ABAP program to carry out the Calendar week calculation
    Problem scenario: As stated earlier the requirement is to delete the data from the cube based on the calendar week. Thus a code must be developed such that the number of weeks should be taken as input and corresponding calendar week should be determined. This calendar week should be then passed to the deletion program in order to carry out the data deletion from the InfoCube.
         Transaction code: Use T-code SE38 in order to create a program.
    Logic: Suppose we need to delete the data older than 100 weeks.
    a.     Get the number of weeks and system date in variables and calculate the total number of days :
    lv_week = 100.      *number of weeks      
    lv_dte = sy-datum.     *system date
    v_totaldays = lv_week * 7.      *total days
    b.     Get the corresponding calendar day from the total days. This is obtained by simply subtracting the total no. of days from the system date.
    lv_calday = lv_dte - v_totaldays. *corresponding calday.     
    c.     Now in order to get the calendar week corresponding to the calculated calendar day we must call a function module 'DATE_TO_PERIOD_CONVERT'. This function module takes input as Calendar day and Fiscal year variant and returns the appropriate fiscal period.
    Get the sales week time elements
      call function 'DATE_TO_PERIOD_CONVERT'
        exporting
          i_date                      = lv_calday
          i_periv                     = lc_sales
        importing
          e_buper                     = lv_period
          e_gjahr                     = lv_year
        exceptions
          input_false                 = 1
          t009_notfound               = 2
          t009b_notfound              = 3.
      if sy-subrc = 0.
        ls_time-calweek(4)      = lv_year.
        ls_time-calweek+4(2)    = lv_period.
      endif.
    v_week = ls_boots_time-calweek.
    Note: We can pass the fiscal year variant which can be obtained from the table T009B.For e.g. here fiscal year variant lc_sales = Z2. LS_TIME will be any table with suitable time units.
    d.     Now we have obtained the required calendar week in the v_week variable. This calendar week is the week till which we need to keep the data. And older data than this week will be deleted. This deletion will be done by the deletion program
    Submitting the Data deletion program for ZEPBGC01 and key field
    SUBMIT ZDEL_EPBG WITH C039 LT v_week.
              Here the calendar week value is submitted to the deletion program ZDEL_EPBG with the screen field of calendar week.
    Hope ... this will  help you..
    Thanks,
    Jitendra

  • Delete data from DSO only with a part of the key

    Hi experts,
    I have a DSO with 9 key fields and i want to delete some entrys. Our source system only provides 2 fields of the key. My problem is, that the BI is not able to delete from DSO unless I have the full key.
    Now I want to get the rest of the key fields from the active table of the DSO. Can sombody help me please with the ABAP Code? Or is there another possibility?
    I already found this thred in SDN but this is for BW 3.5:
    Delete data from ODS with only part of the key
    Thanks
    Ralf

    Ralf,
    the thread pointed out by you is for passing deletion entries to the DSO / target using the deletion entries .. namely recordmode = D.
    Are you looking at deleting data from the DSO as a one time activity or you want to handle the same using a start / end routine ...? and pass deletion entries to other data targets which get the data from this DSO ?
    Arun

  • Deleting data from another table with multiple conditions

    Hi frnds
    I need to delete some data from a table based on multiple condition I tried following sql but its deleteing some rows which is not meeting the criteria which is really dangerours. When i trying = operator it returns ORa- 01427 single -row subquery returns more than one row
    delete from GL_TXNS
    where TRN_DT in (Select trn_Dt from GL_MAT)
    and BR in (select ac_branch from GL_MAT)
    and CODE in (select CODE T from GL_MAT)
    and (lcy_amt in (select lcy_amt from GL_MAT) or
    fcy_amt in(select fcy_amt from GL_MAT)
    rgds
    ramya

    My answer is the same as Avinash's but I will explain a little bit more.
    ORa- 01427 single -row subquery returns more than one rowmeans that you have a subquery that Oracle is expecting one value from that is returning multiple values. In your case you need one value for the equijoin ("=") and you are getting more than one value back. The error happens even if all the values are the same - multiple values being returned will cause the error.
    The solution is to either allow multiple values to be returned (say, use the IN condition istead of "=") or only return one value if possible (say, forcing one value by using DISTINCT, GROUP BY, or a WHERE clause condition of ROWNUM=1) - but these workarounds must be checked carefully to make sure they work correctkly

  • Deleting data from a partition in a table

    There is a requirement to delete data from a particular partition in our PROD Env.
    Please let me know the syntax for the same.
    Also is it possible to truncate a partition?
    The DB version is 10.2.0.4 and OS is Solaris 10
    Regards,
    Narayan
    Edited by: user7202581 on Apr 14, 2013 12:11 AM

    Hi, You can use the following Syntex.
    -- For Truncate
    ALTER TABLE <table_name> TRUNCATE PARTITION <Partition_name>;
    -- For Delete
    DELETE FROM <table_name> PARTITION <partition_name>;

  • Error  While  Deleting Data  From ODS

    Hi all,
    We are getting short dump while deleting data from a perticular ODS.
    Part of short dump is--
    trigger Location of Runtime Error
       Program                                 SAPLRSAC
       Include                                 LRSACU75
       Row                                     535
       Module type                             (FUNCTION)
       Module Name                             RSAR_TRANSTRUCTURE_ACTIVATE
    help is desperately required
    Regards
    Srini--

    try to activate InfoSource and later delete data.
    Check if all ODS related objects are consistent and active.
    also pls attached the whole dump for more clarity if this does not work.

  • Error while deleting data from a write optimized DSO using a Process Chain?

    Dear Bwers,
    I am facing a strange error while using process chains to delete data from data target which is a write optimized DSO. The process shows as failed but the data gets deleted in the DSO. The error message is as below. Did anybody have a similar problem? Any suggestions.
    Thanks
    Raj
    Error while deleting content of InfoCube/DataStore object ZLSD_G03
    Message no. RSDODSO153

    Please, check if you get any short dump in ST22 related to this issue.

  • Open HUB ( SAP BW ) to SAP HANA through DB Connection data loading , Delete data from table option is not working Please help any one from this forum

    Issue:
    I have SAP BW system and SAP HANA System
    SAP BW to SAP HANA connecting through a DB Connection (named HANA)
    Whenever I created any Open Hub as Destination like DB Table with the help of DB Connection, table will be created at HANA Schema level ( L_F50800_D )
    Executed the Open Hub service without checking DELETING Data from table option
    Data loaded with 16 Records from BW to HANA same
    Second time again executed from BW to HANA now 32 records came ( it is going to append )
    Executed the Open Hub service with checking DELETING Data from table option
    Now am getting short Dump DBIF_RSQL_TABLE_KNOWN getting
    If checking in SAP BW system tio SAP BW system it is working fine ..
    will this option supports through DB Connection or not ?
    Please follow the attachemnet along with this discussion and help me to resolve how ?
    From
    Santhosh Kumar

    Hi Ramanjaneyulu ,
    First of all thanks for the reply ,
    Here the issue is At OH level ( Definition Level - DESTINATION TAB and FIELD DEFINITION )
    in that there is check box i have selected already that is what my issue even though selected also
    not performing the deletion from target level .
    SAP BW - to SAP HANA via DBC connection
    1. first time from BW suppose 16 records - Dtp Executed -loaded up to HANA - 16 same
    2. second time again executed from BW - now hana side appaended means 16+16 = 32
    3. so that i used to select the check box at OH level like Deleting data from table
    4. Now excuted the DTP it throws an Short Dump - DBIF_RSQL_TABLE_KNOWN
    Now please tell me how to resolve this ? will this option is applicable for HANA mean to say like , deleting data from table option ...
    Thanks
    Santhosh Kumar

  • Update/insert/delete data from xcelsius to Database via web service

    Hi,
    I need to create dashboard that go function can <b>update/insert/delete</b> data send to <u>Database</u> thru <u>web services</u>, as i know got 2 xcelsius add-on software which support those of function <b>InfoBurst</b> and <b>flynet </b>
    <b>InfoBurst</b>
    http://www.infosol.com/azbocug/minutes/4-Writeback%20to%20a%20Database%20with%20Xcelsius.pdf
    <b>flynet </b>
    http://www.flynetviewer.com/public/community/Blogs/FlynetXcelsiusServerUser/default.aspx
    Except this 2 purchase add-on xcelsius, any other solution ?  
    Maybe need to write some in MSSQL or C# programming which enable insert, update, delete ...etc  ?
    *note: i not use Xcelsius Engage Server , i use Xcelsius Engage only
    thanks,
    regards
    s1
    Edited by: Leong Pui Kee on Mar 1, 2011 6:06 AM

    Hi,
    As of now in Xcelsius/Dashboard Design there is no feature or functionality to insert/update/delete data from database.
    Solution:
    Create a Web service in let’s say C# or Java, which will perform insert/update/delete operation.
    In Xcelsius add Web Service connection and user above web service.
    Xcelsius Web Service connection provides option to pass input values to a Web Service (Input Pane) and get the result (Output values pane).
    We can pass values to be written to the database as a input to Web Service via Web Service connection from Xcelsius and write data to the database.
    Note:
    Performing delete operation from Xcelsius Dashboard could be risky and may delete important data from database. I would not prefer giving delete option/functionality in Xcelsius dashboard.
    Hope this helps!
    Thank you.
    Regards,
    Vinay Mhaske

  • Delete data from archive server

    Hello,
    we have following question : How do you delete data from archive server which has passed the retention time and need to be removed from archive server.
    Have you any ideas?
    Thanks,
    Stefan

    Hi Planung,
    For deletion of data SARA transaction is used. Also deletion indicator is required to set for the documents which you are not using. Use the bapi BAPI_DOCUMENT_DELETE  for deleting the documents which are set with deletion indicator.
    I hope this will resolve the query.
    Regards,
    Ravindra

  • Is it possible to delete files from time machine?

    Is it possible to delete files from time machine? I had a drive crash, restored the files to a new drive, and now the old versions and the new versions of the files are both backed up, taking up a mountain of drive space. Do I just have to wait 'til the drive gets full and then tell it what to delete first?

    Hi, I need help in a related problem. I have 500gb time capsule. I needed larger hard drive, so I now use TM to back up to a different 1tb hard drive. So I don't need the TC as a TM back up device. But I want to use the TC's hard drive as an extra external hard drive. I deleted the files that were on it. but it still shows it has a sparsebundle file with a size of over 400gb ( probably the size of the old backups). When I use disk utility to try to erase it, I am not offered the erase tab. This "disk" does show on the desk top as a mounted disk (I think) with only 53 gb free. How can I set this up so all the disk space is free and I can use it for storing files, not as a back up? Thanks

  • Unable to Delete Data from PSA

    Hi Experts,
    I have a process chain which delete data from PSA on weekly basis . it running good . Since one month one of data target PSA data not deleting.
    it gives me error like DDL time(___1): .........2 milliseconds
    Delete request REQU_03RM2LOJ284N3GLM7Q574WLAO from PSA 8Z0MM_O39_OA: Error - subrc: 2
    When i am tring to delete manually it gives me above error only.
    I used programme (RSAR_PSA_CLEANUP_DIRECTORY)
    for deleteting PSA Data this programme gives me errors request already deleted from data base. But still those request available when i am looking into PSA data.
    it's happen only quality system not in the Production.
    Kind Regards,
    ve.

    Hi Srinath,
    when i am looking into system there is no programeme with name(SAP_PSA_ZEROCORREC) But another programme RSAR_PSA_CLEANUP_DIRECTORY is available i tried with these programme for deleting PSA it gives me error like request deleted from database.
    But it gives me an error indicator only.
    i  am tried to delete manually by selectiong those request from PSA it gives me error DDL Time (______1) 2 milliseconds.
    Kind Regards,
    ve.

  • Unable to delete data from a partition

    Hi,
    Unable to delete data from a partition
    I am using the command as:
    ALTER TABLE TEST DROP PARTITION DATE_20090820090000
    Its giving 0 rows deleted.Bu there are 200 rows for the Partition.
    The partition is getting deleted but the data remains.
    I want a command where the data in the partition also to be deleted along with partition.
    Any help will be needful for me

    SQL> CREATE TABLE range_part (
    prof_history_id NUMBER(10),
    person_id NUMBER(10) NOT NULL,
    organization_id NUMBER(10) NOT NULL,
    record_date DATE NOT NULL)
    PARTITION BY RANGE (record_date) (
    PARTITION yr0 VALUES LESS THAN (TO_DATE('01-JAN-2007','DD-MON-YYYY'))
    PARTITION yr7 VALUES LESS THAN (TO_DATE('01-JAN-2008','DD-MON-YYYY'))
    PARTITION yr8 VALUES LESS THAN (TO_DATE('01-JAN-2009','DD-MON-YYYY'))
    PARTITION yr9 VALUES LESS THAN (MAXVALUE) );
    Table created.
    SQL> INSERT INTO range_part VALUES (1, 1, 1, SYSDATE-720);
    INSERT INTO range_part VALUES (2, 2, 2, SYSDATE-360);
    INSERT INTO range_part VALUES (3, 3, 3, SYSDATE-180);
    INSERT INTO range_part VALUES (4, 4, 4, SYSDATE);
    1 row created.
    SQL>
    1 row created.
    SQL>
    1 row created.
    SQL>
    1 row created.
    SQL>
    SQL> commit;
    Commit complete.
    SQL> SELECT * FROM range_part;
    PROF_HISTORY_ID PERSON_ID ORGANIZATION_ID RECORD_DATE
    1 1 1 31-AUG-2007 05:53:22
    2 2 2 25-AUG-2008 05:53:22
    3 3 3 21-FEB-2009 05:53:22
    4 4 4 20-AUG-2009 05:53:22
    SQL> SELECT * FROM range_part PARTITION(yr7);
    PROF_HISTORY_ID PERSON_ID ORGANIZATION_ID RECORD_DATE
    1 1 1 31-AUG-2007 05:53:22
    SQL> alter table range_part drop partition yr7;
    Table altered.
    SQL> SELECT * FROM range_part PARTITION(yr7);
    SELECT * FROM range_part PARTITION(yr7)
    ERROR at line 1:
    ORA-02149: Specified partition does not exist
    SQL> SELECT * FROM range_part;
    PROF_HISTORY_ID PERSON_ID ORGANIZATION_ID RECORD_DATE
    2 2 2 25-AUG-2008 05:53:22
    3 3 3 21-FEB-2009 05:53:22
    4 4 4 20-AUG-2009 05:53:22

  • Is that possible to transfer data from old apple id to new apple id becoz my old apple id is not working

    Is that possible to transfer data from old apple id to new apple id becoz my old apple id is not working.

    Merging of Apple ID accounts is not possible.

  • How to delete data from a DSO using start or end routine

    Is it possible to delete records from a DSO in the start or end routine.
    My example:  I have order 123, item 10, sched line 1.  This gets loaded into the DSO.
    Next day I have order 123, item 10, sched line 2 coming in.
    I want to delete the first one (with sched line 1) from the DSO and load the second one (with sched line 2).
    Can code be put in the start or end routine to do this?

    unless I can do it within the start routine I don't want to have to create new records.
    In the start routine I am comparing records coming in with what are already in the DSO.  If there is a match on order and item and the sched line is different, then I want to delete the record from the DSO and load the new one.  Is there code that I can put in a start routine to accomplish this?

Maybe you are looking for