Is it possible to import images larger than 32,768 pixels in a 64-bit version of Photoshop (CS4 or later)?

I deal with grayscale images that are 33,000x33,000 pixels. Right now I am limited by the amount of RAM I can allocate in CS3 which is 32bit. I would like to upgrade to a 64bit version of Photoshop but still be able to import my images.

Shaun E. wrote:
Noel, I've copied a link to an image I made https://dl.dropboxusercontent.com/u/6333610/33k_ccittfax4.tif
Just for reference, a set of test results:
Photoshop 6.0 does not open the image, emits this error:
Photoshop CS2 opens the image at an odd ratio after a warning:
Photoshop CS3 behaves the same as CS2:
Photoshop CS4 x64 does not open the file, with this error:
Photoshop CS5 x64 does not open the file, with this error:
Photoshop CS6 x64 does not open the file, with this error:
Photoshop CC x64 does not open the file, with this error:
Photoshop CC 2014 x64 does not open the file, with this error:
-Noel

Similar Messages

PS Touch needs a warning message when importing files larger than 2048x2048 max resolution

I opened 6500x5000 px files into PS Touch in iPad for some minor retouching. PS Touch - without notification - reduced the images to fit within 2048 x 2048 px. It happily let me open these files, work on them and save and never let me know it was reducing the file size, rendering all the work I did utterly useless since 2048x2048 is far too small for print res for these files.
PS Touch needs a notification or warning when importing files larger than the app's max resolution. Resizing files without notification is just asinine.

Hi Jeff,
For improvements or feature requests - please create an Idea for others to vote for:
Thanks,
Ignacio

Can I print a image larger than 4x6 directly from iPad's photo application to a HP Air Print printer without a additional app?

Can I print a image larger than 4x6 directly from iPad's photo application to a HP Air Print printer without a additional app?

jerryone1942 wrote:
Can I print a image larger than 4x6 directly from iPad's photo application to a HP Air Print printer without a additional app?
It depends upon the capabilities of your printer. If you have an HP printer with a photo tray then the Photo app will print to whatever size you load in to that tray.
There's some more information here:
Using AirPrint to Print Various Photo Sizes
With other printers the user is given a choice from the printer's loaded paper sizes. You can see an example of that here:
The Many Faces of the iOS Print Panel

IDVD create disk image larger than DVD-R capacity

Here's the background:
- I made an iMovie 6 in 16:9 NTSC that is 1:32:00:06 long. I put that into iDVD 6, use the 5.0 Theme called "Wedding White", no slideshow, just a few photos and one 128k audio AAC file for menu music. Motion menu right now is about 5min45sec, but I can change that no problem.
- In iDVD 6's "Project info", left hand column shows "NTSC", "Widescreen (16:9)", "Best Quality", "Single-Layer (SL) - 4.2GB"; all correct.
Right hand column - Project Duration is 97:47min, Motion Menus is 5:46 of 7:30, Tracks 1 of 99, Menus 3 of 99; all green.
"DVD Capacity" was shown as ~3.3GB before the burning.
Here's the problem:
- When I first burned directly onto a single-layer DVD-R, an error will come on during burning or multiplexing near the end. Disc will eject, and the disc IS PLAYABLE on all DVD players. Only problem is that the movie will end (or says "Disc scratched or dirty", then crashes DVD Player on my Mac) at around 1:30:50; about 1min 11sec short. iDVD will also hang, and need to be forced quit.
- If I check that finished DVD-R with Disk Utility, it'll show:
--Capacity 4.4GB (4,706,074,624)
--Used 4.4GB (4,739,385,344)
- Same results with two decent media, a Sony 16x and a Ritex G05 8x.
- After reading a lot of posts in this discussion board, I tried two things:
1. Clean up my primary HD, which was down to <10GB free. I realized that I need double the disk space to properly burn. Now, it's at around 30GB free.
2. Instead of direct burn, I saved it as Disc Image. Results:
-- Video_TS file totally fine when played with DVD Player.
-- Disc Utility shows: Capacity 4,739,923,968 Bytes, Used 4,739,385,344 Bytes
But when I tried to burn that image onto a disc in Disk Utility, it says the media doesn't have enough room.
3. I went back to iDVD 6's "Project Info", and the "DVD Capacity" bar is now filled, yellow and says "4.2GB of 4.2GB".
[I actually tried earlier with a slightly different version with longer motion menus, and a slightly longer movie. And the DVD it tried to burn is even larger, at 4,847,159,296 Bytes. Similar results, but that DVD will end about 4 minutes short. But I didn't write down all the iDVD 6 details that time.]
SOOOOOO....
It seems to me that iDVD 6 is miscalculating its rendering or compression ratio, and is creating a final disc image larger than the capacity of a single-layer DVD-R, even though all parameters are set and displayed correctly.
For me, I'll cut down on the motion menu duration to see if that will help, as I'm right now JUST BARELY over the capacity.
Because of the early audio problem with iMovie/iDVD 6, this is the my first "finished" iDVD 6 product. Before, I have had no problem with movies that are close to the 120-minute limit, though this is the first time I use a 5.0 Theme with motion menus.
So, any ideas, any comments? Please post. Also, what else should I do besides posting here to let Apple and other users know of this problem? Thanks!
G4 Gigabit Ethernet Dual 1.6GHz Mac OS X (10.4.5) Pioneer DVR-110D, 1.12G RAM
G4 Gigabit Ethernet Dual 1.6GHz Mac OS X (10.4.5) Pioneer DVR-110D, 1.12G RAM

An update:
I cut down the loop duration of the motion menus, from 5:46 to 2:50. The resulting disc image is down to 4.25GB (4,563,716,096 bytes) and will fit onto a single-layer DVD-R.
So, I finally made my first successful DVD using iDVD 6. Still don't know why this has been such an adventure compared to earlier iLife versions.

ERROR ITMS-9000: "Images larger than 2000000 pixels are not allowed in books

How to reduce image to resolve following issue ?
ERROR ITMS-9000: "Images larger than 2000000 pixels are not allowed in books
Thanks.

Hi there djking!
I have an article for you here that can help you with that issue. The article is all about adding images to your books, and can be found here:
iBooks Author: Add and edit photos and other images
http://support.apple.com/kb/PH2797
Thanks for using the Apple Support Communities!
Cheers,
Braden

Problems with photoshop elelements 11 - can't handle images larger than appr 15-40 MB (jpeg)

Someone who knows the limitastions of PE 11 about possible size of images (jpeg)?

Yes, here is the link:
http://helpx.adobe.com/photoshop-elements/kb/maximum-image-size-limits-photoshop.html

MDM Not Able To Load Linux Kernel Images Larger Than 32MB?

Hi All,
I've been building linux initramfs images for use with a Kintex7 (KC705) running a MicroBlaze processor and have been running into an issue with loading the images using the MicroBlaze Debug Module. It seems the system won’t boot if the image is larger than 32 MB. Unfortunately, my use case requires all application code to be contained in the kernel image and I won't have local non-volatile to boot from.
Some key factors:
Petalinux 2014.4
FPGA image built using Vivado 2014.4 on Windows 7
1GB RAM on KC705
Loading images using TCL script on XMD on Windows 7
As an example, I built an image that would fit within the 32 byte "limit" and booted it with no issues:
Image Type: MicroBlaze Linux Kernel Image (uncompressed)
Data Size: 31035828 Bytes = 30308.43 kB = 29.60 MB
MicroBlaze Processor Configuration :
Version............................9.4
Optimization.......................Performance
Interconnect.......................AXI-LE
MMU Type...........................Full_MMU
No of PC Breakpoints...............1
No of Read Addr/Data Watchpoints...0
No of Write Addr/Data Watchpoints..0
Instruction Cache Support..........on
Instruction Cache Base Address.....0x80000000
Instruction Cache High Address.....0xbfffffff
Data Cache Support.................on
Data Cache Base Address............0x80000000
Data Cache High Address............0xbfffffff
Exceptions Support................on
FPU Support.......................off
Hard Divider Support...............on
Hard Multiplier Support............on - (Mul64)
Barrel Shifter Support.............on
MSR clr/set Instruction Support....on
Compare Instruction Support........on
PVR Supported......................on
PVR Configuration Type.............Full
Data Cache Write-back Support......off
Fault Tolerance Support............off
Stack Protection Support...........off
Connected to "mb" target. id = 0
Starting GDB server for "mb" target (id = 0) at TCP port no 1234
System Reset .... DONE
Downloading Program -- simpleImage.mb
section, .text: 0x80000000-0x802a2b27
section, .init.text: 0x80359000-0x803727a3
section, .init.ivt: 0x803749c0-0x803749e7
section, .note.gnu.build-id: 0x00000000-0x00000023
section, __fdt_blob: 0x802a2b28-0x802aab27
section, .rodata&colon; 0x802ab000-0x8032085f
section, __ksymtab: 0x80320860-0x803254f7
section, __ksymtab_gpl: 0x803254f8-0x80327f17
section, __ksymtab_strings: 0x80327f18-0x803380f6
section, __param: 0x803380f8-0x80338417
section, __modver: 0x80338418-0x80338fff
section, __ex_table: 0x80339000-0x8033a59f
section, .sdata2: 0x8033a5a0-0x8033afff
section, .data&colon; 0x8033b000-0x8035809f
section, .init.data&colon; 0x803727a4-0x803749bf
section, .init.setup: 0x803749e8-0x80374cdb
section, .initcall.init: 0x80374cdc-0x80374fa3
section, .con_initcall.init: 0x80374fa4-0x80374fab
section, .init.ramfs: 0x80374fac-0x81d991b3
section, .bss: 0x81d9a000-0x81dabb7b
Then, I added a 10MB random file (created using dd from /dev/urandom) to the same rootfs and tried booting again unsuccessfully:
Image Type: MicroBlaze Linux Kernel Image (uncompressed)
Data Size: 41521588 Bytes = 40548.43 kB = 39.60 MB
MicroBlaze Processor Configuration :
Version............................9.4
Optimization.......................Performance
Interconnect.......................AXI-LE
MMU Type...........................Full_MMU
No of PC Breakpoints...............1
No of Read Addr/Data Watchpoints...0
No of Write Addr/Data Watchpoints..0
Instruction Cache Support..........on
Instruction Cache Base Address.....0x80000000
Instruction Cache High Address.....0xbfffffff
Data Cache Support.................on
Data Cache Base Address............0x80000000
Data Cache High Address............0xbfffffff
Exceptions Support................on
FPU Support.......................off
Hard Divider Support...............on
Hard Multiplier Support............on - (Mul64)
Barrel Shifter Support.............on
MSR clr/set Instruction Support....on
Compare Instruction Support........on
PVR Supported......................on
PVR Configuration Type.............Full
Data Cache Write-back Support......off
Fault Tolerance Support............off
Stack Protection Support...........off
Connected to "mb" target. id = 0
Starting GDB server for "mb" target (id = 0) at TCP port no 1234
System Reset .... DONE
Downloading Program -- simpleImage.mb
section, .text: 0x80000000-0x802a2b27
section, .init.text: 0x80359000-0x803727a3
section, .init.ivt: 0x803749c0-0x803749e7
section, .note.gnu.build-id: 0x00000000-0x00000023
section, __fdt_blob: 0x802a2b28-0x802aab27
section, .rodata&colon; 0x802ab000-0x8032085f
section, __ksymtab: 0x80320860-0x803254f7
section, __ksymtab_gpl: 0x803254f8-0x80327f17
section, __ksymtab_strings: 0x80327f18-0x803380f6
section, __param: 0x803380f8-0x80338417
section, __modver: 0x80338418-0x80338fff
section, __ex_table: 0x80339000-0x8033a59f
section, .sdata2: 0x8033a5a0-0x8033afff
section, .data&colon; 0x8033b000-0x8035809f
section, .init.data&colon; 0x803727a4-0x803749bf
section, .init.setup: 0x803749e8-0x80374cdb
section, .initcall.init: 0x80374cdc-0x80374fa3
section, .con_initcall.init: 0x80374fa4-0x80374fab
section, .init.ramfs: 0x80374fac-0x827991b3
section, .bss: 0x8279a000-0x827abb7b
I've also tried the same test with a plain Petalinux image and none of my application code or other customizations to rule out a configuration issue. Additionally, I've tried updating Vivado to 2015.2 and rebuilding the FPGA image, also with no success.
FYI, here is the TCL script used to load the images:
fpga -f system_top.bit
connect mb mdm
after 2000
dow simpleImage.mb
con
disconnect 0
I've done a bunch of research on initramfs and haven't seen anything that points to a size limit (except as it relates to RAM size). Anyone have an idea what's going on?
Thanks!
-Nick

Some additional information:
When the system fails to boot, there is no error message displayed either on the XMD window or the linux console output. The console remains blank.
I have been able to add random files to the ramdisk that do not push the size over the 32MB boundary and the system successfully boots.

Is it possible to import images into a specific iPhoto album?

I have an Album in iPhoto I use for great sample images that inspire me.
I'd like to import images straight into that Album from the Finder or my iPhone.
Is there any way to do this, I tried using Automator but could not get it to work.

This is on 10.7 - it may not be on 10.6...
1. Launch Automator
2. Choose to make a Service
3. On the top of the Right Hand Pane: Choose 'Service Receives Selected... Image Files from the Drop Down menu
4. Extreme left hand pane select Photos
5. Middle pane: Select 'Import Files to iPhoto' and drag it to the Right Hand Pane
The option to select an Album is built-in to the Action

Is it possible to have fonts larger than 72pt?

Have been looking for a work around for this problem for awhile now but can't seem to get anywhere. Is it possible to have fonts bigger than 72pt? If not that is a massive fail.

I see what you mean now, it seems to be an issue with artwork PDF forms, I don't have a problem with a standard PDF form.
I did get the font size to stick, https://acrobat.com/#d=RnEQbNdhe26z-bPYyVnEYQ is my sample.
But I had to edit the XML Source (from the View menu), so the line;
<body xmlns="http://www.w3.org/1999/xhtml" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/"><p>99</p></body>
became
<body xmlns="http://www.w3.org/1999/xhtml" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/"><p style="font-size:300pt">99</p></body>
That is I added the font-size style attribute.
Hope that helps.
Bruce

Image button imports much larger than actual size

I have a lot of custom image buttons in my Captivate project. I am now trying to scale them down in size, to reduce overall file size of my project. Some of my custom png images show up as 100 px in Photoshop, then when I import them into Captivate, they stay the same. However others, that show as 100px in photoshop, are importing in at 400px! Any ideas why this would happen. The original set was 400px. But I have overwritten the files with smaller ones in the gallery and re-inserted them - but still no luck. Thanks.

Hi
i am posting this again due to lack of response. Its urgent. so i will really be thankful to anyone who can help.
My application prints out cd labels. As i checked the width of a cd label is 12.5 cm which is 472 pixels. Now when i set component size to 472 pixel and print just that component, the out put seems to be much larger. like it covers almost 90% width of a A4 page. My code is like this:
I want to print LabelContainer
private function print():void
     printjob = null;
     printjob = new FlexPrintJob();
     LabelContainer.printDataGrid.selectedIndex = -1;
     try{
          if(printjob.start()){
               datamodel.showTitles = false;
               printjob.addObject(LabelContainer,FlexPrintJobScaleType.NONE);
               printjob.send();
               datamodel.showTitles = true;
     }catch(e:Error){
          Alert.show(e.message);
can some one please help me. I really dont understand this.

IDVD creating disk image larger than it should be.

I exported an iMovie to iDVD and set up the dvd using one of the supplied themes. I checked the disk info to make sure it will fit the DVD-R. The program says my file should be about 3.9 Gigs. The disk burn was incomplete so I tired to create a disk image instead. The size of the disk image is 4.57 gigs.
The incomplete dvd would play all the way until the last few minutes of the movie and then crash the dvd player.
The last time this happened to me I had to reinstall the OS and lost the project I was working on as a result. Does anyone have a less drastic solution?
I have about 60 gigs of free space on my hard drive still.
Thank you

The movie was just under two hours long. It is about the length that I used to make all my previous movies. I know that if I reinstall the OS and software that it will correctly create the disk image. I have already tried reinstalling the iDVD software and the result is the same problem. I also know that the file should fit the disk because when I look at the project info it shows that the project size is 3.8 gigs. It is just that when I do create the disk image the final file size of the image is around 4.57 gigs. (The project info still shows 3.8 gigs after creating the image.)
It would take several days of backing up and reinstalling software and I would like to avoid that if possible as I would also lose a lot of my preference settings. One other symptom, if I tried to burn data disks from the finder, I have to restart between burns or the second disk will fail to burn.

Image larger than specified

Hey guys,
I started a new project. I set the file criteria for 4" wide 5" high, 300 resolution, CMYK.
When I save the file as a JPEG and export it for print the image is huge. I don't know what I'm doing wrong.
I check the settings again, after noticing they are huge, and the settings show it's still 4" wide 5" high, with 1200 pixels wide, 1500 pixels high.
What am I doing wrong? How can I avoid it on future projects, and how can I fix this project?
Thanks!!!

Sorry for confusing you guys. I've been working 80 hours this week, and I guess my cognitive ability has been impaired, LOL. I'm sending the files via JPEG to a friend, who in turn is taking them to FedEx kinko's to have them printed out. When she opens the files for print she says the come out way too large. I'll send her TIFFs as well and see if that helps.

Importing CDs larger than 700MB in total size

When i try to import a CD with a total file size over 700MB the last few songs will not import and the details of the song are in the library but the song cannot be played and the track length is "not available". Any ideas this is very annoying.
I have tried selecting only the offending songs and importing them but this doesn't work either.
THe first songs on the disc import as normal

Hi Jeff,
For improvements or feature requests - please create an Idea for others to vote for:
Thanks,
Ignacio

Make image larger than 2048x2048

How to make a PSTouch document size 2048x4096
Create document 1024x2048
Tap "&", then "Image Size"
Break the size ratio link (tap the chain)
Set width to 2048
Establish the size ratio link (tap the chain)
Tap "OK"
Now your document is 2048x4096
Need a huge landscape? (4096x2048)
Add this step..."&", "Rotate", "Rotate 90 CW"

Thank you for this tip! It makes it run a little slower, but I can deal with that. It amazes me that pst hasn't figured out a way to allow full res pics to be edited when other lesser photo apps have. Crossing fingers it's coming soon.
Thanks again!

Import video larger than project

Hi,
I would like to know if there is a good way to import a 2880x1920 mov in a 1920x1080 project.
When i import the .mov in the project, the file become 1920x1080 ( 100% scale) and i don't i want that because i want to be abble to zoom inside the 2880x1920 file.
Thanks

Set the spatial conform in the video inspector to none.

Is it possible to import images larger than 32,768 pixels in a 64-bit version of Photoshop (CS4 or later)?

Similar Messages

Maybe you are looking for