Is it possible to send a Mail message from the keyboard (Macbook pro)?

Occasionally while I am composing a message in Mail the send command is somehow activated and the half complete message is sent. I don't want this to happen and can find no keyboard command that I might be mistakenly typing. I certainly don't click on the send button in the tool bar. Any ideas would be appreciated. This is irritating and sometimes embarrassing.
Thanks.

Shift CMD D is the keyboard shortcut, not exactly easy to hit by mistake though.
Captfred

Similar Messages

Is it possible to send a text message using the UDP protocol?

Support doc
http://www.adobe.com/support/director/multiuser/using_udp/using_udp02.html
says to use the following format with connectToNetServer:
errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
"chatServer.myCompany.com", #logonInfo: [#userID: "Bob",
#password:
"MySecret", #movieID: "Tech Chat"], #mode: #smus,
#localUDPPort: 1627,
#localAddress: "123.45.67.89", #remoteTCPPort: 1626])
But if I change the mode to #text, it still sends out
messages as smus.
In fact, if I leave out the UDP parameters altogether but
still use the
list parameters for connectToNetServer, it still always sends
as smus.
Sends as smus:
errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
"chatServer.myCompany.com", #logonInfo: [#userID: "Bob",
#password:
"MySecret", #movieID: "Tech Chat"], #mode: #text,
#localUDPPort: 1627,
#localAddress: "123.45.67.89", #remoteTCPPort: 1626])
Sends as smus:
errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
"chatServer.myCompany.com", #logonInfo: [#userID: "Bob",
#password:
"MySecret", #movieID: "Tech Chat"], #mode: #text])
Only the string parameter method can be made to send text
messages.
Sends as text:
errCode = gMultiuserInstance.connectToNetServer("Bob",
"MySecret",
"chatServer.myCompany.com", 1626, "Tech Chat", 1)
Am I missing something? Is this a known issue? Anyone have a
work around?
-Jeremy

Drat!
Thanks for the answer though.
alchemist wrote:
> The multiuserXtra supports either tcp text or tcp smus
connections.
> The ability to send udp messages was an expansion to the
original mus
> protocol/xtra and is valid only for muXtra instances
already connected in
> smus mode.
> So, if you are asking if you can create a udp instance
and use it at will
> (exchange udp messages with some remote udp socket),
then the answer is no.
>
>
> "Jeremy Aker" <[email protected]> wrote in message
> news:[email protected]...
>> I'm really sorry that I wasn't clear enough. I'll
repeat the questions
>> more concisely.
>> Is it possible to send a text message using the UDP
protocol? If so, how?
>> Is the bug I described in my original message (see
below) really a bug or
>> am I doing something wrong?
>> If it's a bug, does anyone have a work around?
>>
>> alchemist wrote:
>>> And the question is?
>>>
>>> "Jeremy Aker" <[email protected]> wrote in
message
>>> news:[email protected]...
>>>> Support doc
>>>>
http://www.adobe.com/support/director/multiuser/using_udp/using_udp02.html
>>>> says to use the following format with
connectToNetServer:
>>>> errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
>>>> "chatServer.myCompany.com", #logonInfo:
[#userID: "Bob", #password:
>>>> "MySecret", #movieID: "Tech Chat"], #mode:
#smus, #localUDPPort: 1627,
>>>> #localAddress: "123.45.67.89",
#remoteTCPPort: 1626])
>>>>
>>>> But if I change the mode to #text, it still
sends out messages as smus.
>>>> In fact, if I leave out the UDP parameters
altogether but still use the
>>>> list parameters for connectToNetServer, it
still always sends as smus.
>>>>
>>>> Sends as smus:
>>>> errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
>>>> "chatServer.myCompany.com", #logonInfo:
[#userID: "Bob", #password:
>>>> "MySecret", #movieID: "Tech Chat"], #mode:
#text, #localUDPPort: 1627,
>>>> #localAddress: "123.45.67.89",
#remoteTCPPort: 1626])
>>>>
>>>> Sends as smus:
>>>> errCode =
gMultiuserInstance.connectToNetServer([#remoteAddress:
>>>> "chatServer.myCompany.com", #logonInfo:
[#userID: "Bob", #password:
>>>> "MySecret", #movieID: "Tech Chat"], #mode:
#text])
>>>>
>>>> Only the string parameter method can be made
to send text messages.
>>>> Sends as text:
>>>> errCode =
gMultiuserInstance.connectToNetServer("Bob", "MySecret",
>>>> "chatServer.myCompany.com", 1626, "Tech
Chat", 1)
>>>>
>>>> Am I missing something? Is this a known
issue? Anyone have a work
>>>> around?
>>>>
>>>> -Jeremy
>

How can I sync my iPad 2 with my new MacBook Pro when it is already synced with my old MacBook? I am getting a message on the new MacBook Pro that says I am not allowed to sync the iPad 2 because it is synced to another iTunes library.

How can I sync my iPad 2 with my new MacBook Pro when it is already synced with my old MacBook? I am getting a message on the new MacBook Pro that says I am not allowed to sync the iPad 2 because it is synced to another iTunes library.

1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPad but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPad with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.
also, there are PhoneView and iRip.

Mail transfer from the old macbook to the newer retina macbook pro

Hey, My father moved from an old macbook to the new retina macbook pro about 2 months back. Now as he is a business man he requires all his emails from his old mac onto the new macbook. The problem is to integrate his old mail data with 2 months of his current mail data.
All the instructions i have yet found online only seem to be for a new macbook where all the mail data and preferences could be transfered.
Thanks in advance,
Cheers

Hey, My father moved from an old macbook to the new retina macbook pro about 2 months back. Now as he is a business man he requires all his emails from his old mac onto the new macbook. The problem is to integrate his old mail data with 2 months of his current mail data.
All the instructions i have yet found online only seem to be for a new macbook where all the mail data and preferences could be transfered.
Thanks in advance,
Cheers

How to send a text message from the IPad 4 while on Wi Fi?

I have attempted to send text messages using my iPad 4. The messages will not go through. Receiving them is no problem. How can I send messages using my WiFi?
JOhn

Are you trying to send standard sms and mms messages or iMessages

Nokia 5310 Is it possible to send a sms message fr...

Hi Guys
I am using a Nokia 5310 and was wondering if it was possible to send a sms message from my phone to my computer via Bluetooth? I can't seem to find an option to do this and don't know whether I am missing it or if it's just not possible.
Any help or advice would be great.
Thanks Claire xxx

You can't send an SMS. However, if the phone (I don't know the 5310) has a note-taking application where you can create text notes/memos, the application might have an option to send the note/memo over Bluetooth. You might also be able to find some Java application to send text messages (still not SMS, technically) over Bluetooth, if the phone doesn't have such a feature built-in.

TS3276 Unable to print e-mail messages from Mac book pro directly to my HP ink jet printer. Can print from Word, Excel, Safari. E-mail messages only print the date and "sent to" name.

Unable to print e-mail messages from my Mac book pro directly to my HP ink jet printer. Can print from Word, Excel, Safari. E-mail messages only print the date And "sent to" name, the remainder is blank.

If you haven't done so already, try resetting the printing system.
Reset Printing System

I'm trying to send a message from my new MacBook Air, I can type the message but when I hit enter the message does not go?

I'm trying to send a text message from my new MacBook Air, I can type the message but when I hit enter the message does not go.

Have you addressed the message to someone? Is that address capable of receiving text messages?
What happens when you hit enter?

How to Send Foreign Language Email from the iPhone

See this site for online keyboards for some other languages which can be used to generate a mail message from the iPhone.
http://pointatme.com/keyboards/keyboard.html

The keyboard included in the current version of the iPhone is limited to English. But at this site you will find online keyboards for some European languages which can be used to generate a mail message from the iPhone.
http://pointatme.com/keyboards/
And if you point the iPhone browser to this page you can send email in Japanese:
http://n.h7a.org/iphone/mail/

The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your server administrator

I got this problem when I tried to configure out-going email and add an account to farm administrator group.
I configure out-going email according to this website http://technet.microsoft.com/en-us/library/cc288949.aspx
Here are the screen shots.
The SMTP server and email accounts work out OK when I use Outlook 2010 to test.
Anyone can help me about it? Thanks.
Here is the log.
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
8gsf
High
#160008: The e-mail address 'admin3.sharepoint@domain' contains illegal
characters. df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation General
8kh7 High
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation E-Mail
7946 Critical
Cannot complete this action. Please try again.
df98555c-612f-4a58-9443-ab6e9a4fcc53
09/20/2012 09:21:00.36 w3wp.exe (0x1F7C)
0x1138
SharePoint Foundation Runtime
tkau Unexpected
Microsoft.SharePoint.SPException: The user or users have been added successfully, but there was an error in sending the e-mail message. The server may not be set up correctly to send e-mail. To verify that e-mail is configured correctly, contact your
server administrator. at Microsoft.SharePoint.ApplicationPages.AclInv.SendEmailInvitation(EntityEditor picker, String subject, String message) at Microsoft.SharePoint.ApplicationPages.AclInv.BtnOK_Click(Object sender, EventArgs e)
at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String
eventArgument) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStage...
df98555c-612f-4a58-9443-ab6e9a4fcc53
The e-mail address I have tested it for several times and there is no problem.
Anyone has any clue about this error?

Hi.
This I have seen before...
It can be that the SMTP relay server is configured to only allow certain IP ranges or addresses.
It can be that the firewall on the SP server does not allow for SMTP traffic (normally 25, for example for Exchange).
It can be that there is an Antivirus on the SP server(Client AV) that prohobits the Timer service to send email from this server. I have seen MacAfee do this. Needed an policy change.
If, its the builtin SMTP service you are using, check this link:
http://blog.sharepointrx.com/2010/11/18/setting-up-the-iis-smtp-server-for-sending-email-from-sharepoint-2010-on-server-2008-r2/
Check that and try again.
Regards
Thomas Balkeståhl - Technical Specialist - SharePoint -
http://blog.blksthl.com
Download the SharePoint Branding Project here
Download the SharePoint 2010 Site Settings Explained here

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can i see the choices at the bottom of that window?

I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can I see the choices at the bottom of that window?

I tried to send it through gmail and the acct is a POP acct
I'm not concerned about sending to the long address list. I just can't get the email and window that says "cannot send emai using the server..." to go away. The default must be "retry", because although I cannot see the choices at the bottom of the window if I hit return it trys again... and then of course comes back with the very long pop up window that I cannot see the bottom of so I can tell it to quit trying...

TS3899 I send an e-mail message from my iPhone 5c and it shows up in Sent folder as a duplicate, 2 of the same e-mail messages sent at the same time.

I send an e-mail message from my iPhone 5c and it shows up in Sent folder as a duplicate message. 2 identical messages sent at the same time. What's up with this? Tried Apple Support by phone, and did a couple of troubleshoots, then my connection with Apple Support was cut off. Issue not resolved yet.

Did the mail get sent? Is the only issue the fact that it appears twice in the Sent folder?

Is it possible to use Siri to send text messages to groups? I want to be able to say to Siri "Send a text message to the people in 'group 4' category." I then dictate the text message, confirm, and out it goes. Groups of 100 to 250 contacts.

Is it possible to use Siri to send text messages to groups (categories, distribution lists)? I want to be able to say to Siri "Send a text message to the people in 'group 4' category." I then dictate the text message, confirm, and out it goes. Groups of 100 to 250 contacts. What app(s), if any, would I need? Is this in anyway dependent on my carrier?
Thanks in advance for your help.

Hmmm, that's strange - just checked again and it is 1066288.
Note 1066288 - ESS LEA:Workitem XXXX cannot be executed in status COMPLETED
Perhaps you can't see it because it is a "Pilot Release"?
Release Status: Pilot Release
Released on: 26.02.2008 04:54:32
Priority: Correction with high priority
Category: Program error
Primary Component: PT-RC-UI-XS Self Services Web Dynpro

When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message. I use Exchange 2010 only local users.

When I send e-mail messages with file by using a POP3 in Exchange 2010 I received delivered message with file. How I can disable this functions that file do not include to delivery message. I use Exchange 2010 only local users.

I think there is not native rule for this, but you could try a transport rule which removes all attachments over a very small file size like 1KB.
http://blogs.technet.com/b/exchange/archive/2009/05/11/3407435.aspx
CRM Advisor

Using Safari to send HTML Mail message but Mail keeps dropping images?

I'd like to use Safari to send html Mail messages, but when I click on File>Mail Contents... Mail opens a new window but my graphics are gone. (I'm creating the html pages using MS Word for the Mac.) I get a flash of the graphics for a second, and then they are replaced by a little blue lego. Any ideas? I've tried all kinds of mail preferences but nothing seems to help.

Figured it out (at least one way): had to load the image to a server and then add the image as a link only (uncheck "save picture with document" box).

Is it possible to send a Mail message from the keyboard (Macbook pro)?

Similar Messages

Maybe you are looking for