Is it possible to Split A1 in little A4 peaces with Mac OS X?

Hi,
is it possible to split a pdf or jpg which is A1 to little A4 peaces so that i can print it out. I know that this is possible with Acrobat but is it also possible with onboard features of 10.4?
greets and thx

I never knew that feature existed. I just use the slider in System Preferences > Sound and keep it on my toolbar.

Similar Messages

Split document when ever page starts with specific text

Is it possible to split document when ever page starts with specific text

If you look at your code you will see
cPath: "/F/temp/"+filename+"_" + i +".pdf"
which is the Acrobat version of saying
F:\TEMP\ ... your filename ...
Clearly won't work unless you change it to use your own preferred path.

Possible to split one large pdf into multiple pages (in the same pdf?)

I have some well logs that have been scanned - problem is they're coming is as one loooong page in the pdf. Is it possible to split it up into several 8.5 x 11 pages within Acrobat, or do I need special software?

Depends on what you have and the amount of length (a time issue). The simplest way is to use the crop tool to get a page worth and save it, then repeat for the next page, etc. Once all the pages are saved, you can put them back together. You should then use redax or such (print to a new PDF in a pinch) to remove the cropped portions. As I said, this is a bit time consuming, but can do the job. There are likely quicker ways and possibly some 3 party products that can do the job also.

How is it possible to split the table cells in Pages, Version 5.1

How is it possible to split the table cells in Pages, Version 5.1?

This is a feature removed in the change from Pages 09 to Pages 5.0.1.
If you need this facility, revert to Pages 09. If you upgraded to 5.0.1, then the earlier version is still in your Applications folder in a folder called iWork.

Is it possible to split invoice Item category wise?

Is it possible to split invoice Item category wise

In trx VTFA (if your billing is sales order based) choose your billing type and SO type, there select your item categories and there select the field VBRK/VBRP data. In that field you will see the currently used routine. With the help of your ABAP guy create a copy of that routine under a different number and add your lines of code. Let's say you use routine 001.
FORM DATEN_KOPIEREN_001.
Header data
VBRK-xxxxx = ............
Item data
VBRP-xxxxx = ............
Additional split criteria
DATA: BEGIN OF ZUK,
MODUL(3) VALUE '001',
VTWEG LIKE VBAK-VTWEG,
SPART LIKE VBAK-SPART,
END OF ZUK.
ZUK-SPART = VBAK-SPART.
ZUK-VTWEG = VBAK-VTWEG.
VBRK-ZUKRI = ZUK.
ENDFORM.
This is how it should look after modification:
Header data
VBRK-xxxxx = ............
Item data
VBRP-xxxxx = ............
Additional split criteria
DATA: BEGIN OF ZUK,
MODUL(3) VALUE '001',
VTWEG LIKE VBAK-VTWEG,
SPART LIKE VBAK-SPART,
PSTYV LIKE VBAP-PSTYV, <- New line
END OF ZUK.
ZUK-SPART = VBAK-SPART.
ZUK-VTWEG = VBAK-VTWEG.
ZUK-PSTYV = VBAP-PSTYV. <- New line
VBRK-ZUKRI = ZUK.
ENDFORM.
After this routine is created and activated place it as the default copy control routine instead of the old ones

Syndicator Server: possible to split the export file in multiple file?

Hello,
is it possible to split the export files into multiple files e. g. at 5000 records?
Perhaps there is a possibility in the mdss.ini? Or a setting in the mapping?
Thank your for your responses!
Melanie

Hi Melanie,
- If you are syndicating in the Xml format you have the option to syndicate one xml for every record. or multiple records one xml.
For this you have to make a simple setting in the Syndicator-> Map properties->XML file output->(multiple files/single file)
Other way around is:
- If you are syndiacting in any other format say text then the output file goes as one file for all records present in the MDM repository, for this you can use the search options.
- Create a search on some field value which will select a set of records from the lot.
- Then you can syndicate only those records which satisfies the search criteria.
- In this way it is possible to syndicate in parts
Hope It Helped,
Kindly Reward Points if found useful
Thanks & Regards
Simona Pinto

Is it possible to split a number off family plan and start separate account?

is it possible to split a number off family plan and start separate account?

I was just coming to check how to do this.
I added my mom and step dad to my account now want them off. I pay the majority of the bill and it's getting expensive. Just found out my mom get's a big discount through her work. 26% of bill, $50 dollars off of Smartphones, plus her company will reimburse her $65 a month towards her bill. Can't believe I've been paying all this time.

Only price control "V" is possible for split valuation'

Hi
For semi finished items price control has been assigned as 'V'.when i am trying to change the same to S' I got the error message is"Only price control "V" is possible for split valuation''.Even i checked and corrected the MRP views in Material master.
Can any one help me to sort out this issue
Regards,
P.Selvakumar

Hi,
I guess that you are getting the error message M3 185 ('Only price control "V" is
possible for split valuation').   This message is correct.
ONLY materials with Moving Average Price can use the split valuation
function.
The reason is the following one:
If there are 2 valuation types, named X and Y.
There is an equality:
Material pricetotal quantity = Price Xquantity X + Price Y*quantity Y
In order to balance,
When X and Y is 'V', the header material should use 'V'.
When X is 'V', Y is 'S', the header material should use 'V'.
When X and Y is 'S', the header material should use 'V'.
So only price control V is possible for split valuation.
In accordance with the text of the message M3185, split valuation
requires the price code 'V' (moving average price) for the header
record.
Please, refer to the SAP Library (http://help.sap.com) documentation
under the menu path (for your current release level, 470):
MM - Material Price Change (MM-IV-MP)
-> Split Valuation
   -> Creating Material Subject to Split Valuation
"Creating Material Subject to Split Valuation:
1. First create a valuation header record for this material. This is
   where the individual stocks of a material are managed cumulatively.
To do this, fill in the Valuation category field on the accounting
   screen when you create the material master record and leave the
   Valuation type field blank. In the Price control field, enter V
   (moving average price), since a moving average price is constructed
   in the valuation header record from the values and quantities of the
   individual stocks. When you save, the system creates the valuation
   header record.
2. Then create the material for a valuation type.
   To do this, call up the material in creation mode again. Due to the
   fact that a valuation header record exists, the system requires you
   to enter a valuation type for the valuation category.
3. Repeat step two for every valuation type planned."
In order for the system to take into account the different values of
the substocks, the material at the header level must necessarily have
a 'moving average price' (V) control.
Regards,
MLM

Possible to split a cell? numbers v3.1

Is it possible to split a cell in Numbers 3.1? Thank you for your help.

NO, there is no split cell function. You can do what you want, which I think is you want one row to have a column that is split, like this:
To do this:
create a table with two rows:
Now select two adjacent cells in the same row and merge them:
Now select the first row and duplicate by using the <option> + <up arrow> key combination:
To add rows below the row with the merged cells, select the row with the merged cell, then copy
now select a row that is earlier and paste,
you can delete the row with the merged cell at the end
or you can select a row without a merged cell, copy, then paste over one that has a merged cell.
WARNING: you should know that all kinds of undesireable things happen with merged cells.

I keep getting the little blue box with the question mark

Hi
I have 10.6.7 system software and my safari is 5.0.4
I have called apple twice with this problem already but nothing has helped except for short times.
I have reset safari about one dozen times and when I do I reset the top 7 items and I've emptied the cache in addition just in case. I've also taken my safari preference plist out of my library and trashed it.
And I've run disk utilities many times and restarted my computer. Each thing I do will solve the problem for a short time, even up to a day or more (or less) but then it comes back. For instance on Facebook maybe 1/8th of the thumbnail images have the little blue boxes with the question marks but most don't. I can't figure it out. Sometimes even the iPAD safari gets them too but my firefox doesn't show them and neither does Safari on my eMac.
Yesterday the question marks even showed up in ONE mailing on all 3 computers with the question marks in the blue boxes (meaning my iMac, my eMac and my iPad) but then it just all resolved after a few hours. This does sound like possibly a server problem except today it's happening (in Safari again) only on this iMac in Safari (not firefox) and not on the other two devices.
One more thing, since they changed my radio on the roof for my wireless internet, the 5.8 phone cuts out the internet when I use it. The problem has gotten worse since they changed the radio to the same frequency as the phone, it's a much faster service than the 2.4 radio. I don't know if this is related or not.
Thank you,
Martha

<Contact your ISP.
Is it possible, Carolyn, that this would mainly and almost always be only affecting the iMac and Safari in the iMac if it were a server issue? Right now Safari has more blue boxes with question marks than ever and the eMac and iPad have none. Firefox on the iMac has none also.
I should try a direct connection and by pass the router and see if that makes a difference.
I will contact them tomorrow but I want to get clear in my head first all the facts and possibilities.
Thanks!
Martha

Is it possible to insert data into a MySQL database with Java?

Hello everyone!
I would like to know, if it's possible to insert data into a MySQL database, with a JFrame inside a servlet?
When the JFrame is first created it calls this method:
     * Connects the servlet with the MySQL database.
    private void connect(){
        try{
            Class.forName("com.mysql.jdbc.Driver");
            connection = DriverManager.getConnection(
                    "jdbc:mysql://localhost:3306/data", "root", "omfg123");
        }catch(ClassNotFoundException cnfe){
            cnfe.printStackTrace();
        }catch(SQLException sqle){
            sqle.printStackTrace();
    }Then, when you click the "Add" button, it executes this code:
            add.addActionListener(new ActionListener(){
                @Override
                public void actionPerformed(ActionEvent ae){
                    String employee = employeeName.getText();
                    String[] args = employee.split(" ");
                    firstName = args[0];
                    lastName = args[1];
                    execute();
            });And this is my "execute()" method:
     * Connects the servlet with the MySQL database.
     * - And executes the SQL queries.
    private void execute(){
        try{
            PreparedStatement statement = connection.prepareStatement("insert" +
                    " into employees values(" + firstName + ", " + lastName
                    + ")");
            ResultSet result = statement.executeQuery();
            String fullName = firstName + " " + lastName;
            printer.write("Employee " + fullName + " added.</br>");
        }catch(SQLException sqle){
            sqle.printStackTrace();
    }But when I click the "Add" button, nothing happens.

This is what I use to insert into mysql. It works on windows.
try {
            Class.forName("com.mysql.jdbc.Driver");
            String connectionUrl = "jdbc:mysql://" + loadip + "/custsig?" +
                    "user=root&password=";
            Connection con = DriverManager.getConnection(connectionUrl);
            newproc = jTextField1.getText();
            newsoft = jTextField2.getText();
            newdeb = jTextField3.getText();
            newcust = jTextField4.getText();
            if (newcust.equals("")) {
                errorsig12 = 1;
                jLabel1.setForeground(new java.awt.Color(255, 0, 0));
            } else if (newsoft.equals("")) {
                errorsig12 = 1;
                jLabel2.setForeground(new java.awt.Color(0, 0, 0));
            } else if (newproc.equals("")) {
                errorsig12 = 1;
                jLabel3.setForeground(new java.awt.Color(0, 0, 0));
            } else if (newdeb.equals("")) {
                errorsig12 = 1;
                jLabel4.setForeground(new java.awt.Color(0, 0, 0));
            if (errorsig12 == 0) {
                PreparedStatement ps = con.prepareStatement("insert into customer set cust_name = ?, software = ?, processor = ?, debit = ?");
                ps.setString(4, newdeb);
                ps.setString(3, newproc);
                ps.setString(2, newsoft);
                ps.setString(1, newcust);
                int rs = ps.executeUpdate();
        } catch (SQLException eg) {
            System.out.println("SQL Exception: " + eg.toString());
        } catch (ClassNotFoundException cE) {
            System.out.println("Class Not Found Exception: " + cE.toString());
        }

Is the possibility to seek info on the phone gone with iOS7?

Is the possibility to seek info on the phone gone with iOS7?

Can you explain a little more what you mean. I don't quite understand the question.

Little green man with yellow exclamation point

Woke up this morning, my Droid X was off. Pressed the power button and got a little green man with a yellow exclamation point in a triangle above his head. Thought this meant I had to charge phone so I plugged it in. Four hours later, still with the little man. This is my only phone so I really need to get this resolved as quickly as possible. Any help is greatly appreciated.

That is the screen that puts you into "maintenance" mode, for lack of another term. Power it off, if you can. Or just do a BATTERY PULL and repower up. If it is "stuck" on that screen after the battery pull, there is a menu of options that you can get into from that screen. Just press the SEARCH button (far right bottom button) ... that will bring up a menu of options. You scroll through the options using the volume controls ... and to SELECT an option from that menu, use the Camera button. (One of the options is a factory reset ... which should be the very last option you want to do of course if nothing else works.)
You're charging from a wall outlet, right? and not the USB PC charger.

Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?

Is it possible to connect my mid 2010 Macbook Pro with my 21.5" iMac 11,2 so that I can work with dual screens?

try xxx - may work
_may_ work.

How can I split the video port of an older Mac Mini so I can use both the 922-6199 DVI to RCA, S-Video Adapter and a Cinema Display?

How can I split the video port of an older Mac Mini so I can use both the 922-6199 DVI to RCA, S-Video Adapter and a Cinema Display?

Which exact Mini?
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

Is it possible to Split A1 in little A4 peaces with Mac OS X?

Similar Messages

Maybe you are looking for