Is it safe to install Yosemite, while running AdobeCC ?

Im running Adobe CC. Is there any known problems with running photoshop, illustrator or indesign with Yosemite?

Hello
This are the latest news about the compatibility with Mac OS X Yosemite 10.10
Mac OS X Yosemite (10.10) compatibility FAQs | CC
Regards

Similar Messages

  • Mac Acrobat install stalls while running package scripts

    I just purchased the update to Mac Acrobat XI Pro, and while the download went smoothly, the installation process is stalled near the end. I can't quit the program and it doesn't seem to want to advance. Suggestions about how to proceed?
    So, here's the deal: I've recently udgraded to a new iMac with OS X10.9, from an older Mac Pro with OS X 10.6.8. I migrated my CS6 apps over and they all work fine, except I've been getting those Acrobat update notices, and they've always failed. So, I mistakenly unistalled the olde version of Acrobat, 10.1.8 before buying the update from Adobe today. Now I can't get the update to install on the new iMac, although it installs and runs just fine on the old Mac Pro. But of course I want to transistion away from the old to the new and I'm stuck with no Acrobat on the new machine.
    The installer is throwing line after line of these errors:
    Nov 23 15:46:45 Big-iMac.local installd[476]: ./preinstall: sudo: unable to stat /etc/sudoers: Permission denied
    Nov 23 15:46:45 Big-iMac.local installd[476]: ./preinstall: sudo: no valid sudoers sources found, quitting
    Nov 23 15:46:45 Big-iMac.local installd[476]: ./preinstall: sudo: unable to stat /etc/sudoers: Permission denied
    They just keep going, and going...
    Message was edited by: [email protected]

    Hi James,
    You need to contact Apple regarding this as it's clearly a permission issue.
    You might want to try the steps mentioned at : https://discussions.apple.com/thread/3680870?start=0&tstart=0

  • Is it safe to install yosemite on a bootcamp partition

    So if anything goes wrong you can launch up osx mavericks again.
    My specifications:
    2.2GHz Quad core Intel i7
    4GB DDR3 RAM
    Dedicated Graphics:
    AMD Radeon HD

    YYou're better off installing beta software on an external drive.

  • JVM not installed error while running RCU

    Hi,
    I am trying to install Identity Management 11g 11.1.1.6.x in Windows 64-bit version.
    I have installed Java 64 bit version and Oracle Database 11g XE 64 bit version.

    Hi,
    Thanks for your quick reply.
    In the command prompt, I typed the following command,
    java -version
    and it is showing the correct output
    C:\Users\SATHYAM>java -version
    java version "1.6.0_33"
    Java(TM) SE Runtime Environment (build 1.6.0_33-b05)
    Java HotSpot(TM) 64-Bit Server VM (build 20.8-b03, mixed mode)
    plz help.
    -- R. Sathya Moorthy

  • Error while running 'ldifde.exe' to import the schema file

    Hello,
    I'm doing a practical in exchange server. I have two servers, First one is the domain controller it's a Server 2012 R2 and the Second one is the server planing to install exchange 2010. it has server 2008 R2. My issue is when i'm trying to setup Exchange
    Server 2010 it comes error while installing "error while running 'ldifde.exe' to import the schema file" I tried to fix but i couldn't. Please if anyone know about this error give me a solution. 
    Regards.
    Ashane Deshapriya ( MCP )

    Can you run these commands from an elevated powershell and try to install exchange. 
    Import-Module ServerManager
    Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,RPC-Over-HTTP-Proxy -Restart
    If that also fails please post the error.
    Thanks, MAS
    Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

  • Problems downloading and installing OS X Yosemite An error occurred while running scripts from the package

    Hi! I have problems downloading and installing OS X Yosemite.
    While downloading this message pops up:
    An error occurred while running scripts from the package \U201cwct8079783343594854923.pkg\U201d.
    and in /var/log/install.log i can see:
    MacBook-Pro installd[1086]: PackageKit: Install Failed: PKG: pre-install scripts for "com.apple.pkg.InstallMacOSX"\nError Domain=PKInstallErrorDomain Code=112 UserInfo=0x100193c00 "An error occurred while running scripts from the package “wct8079783343594854923.pkg”." {\n    NSFilePath = preinstall;\n    NSLocalizedDescription = "An error occurred while running scripts from the package \U201cwct8079783343594854923.pkg\U201d.";\n    NSURL = "#InstallMacOSX.pkg -- file://localhost/Users/username/Library/Application%20Support/AppStore/91504108 2/wct8079783343594854923.pkg#Distribution";\n    PKInstallPackageIdentifier = "com.apple.pkg.InstallMacOSX";\n}
    does anyone have an idea about this?
    thank you very much

    Mucked up installation. If the installer app is still in /Applications, delete it and start over.
    27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.2), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

  • Having trouble installing Adobe Flash while running Yosemite...

    I installed Yosemite over a week ago and ever since I've been unable to get Flash to work properly. I realized an update needed to be installed (even though I have the automatic updates checked for Adobe Flash), but I'm having a hard time getting the update to complete. It prompts me to close all browsers after the installer downloads. Then after doing so, I click on the installer and everything starts off fine. However, after about 75% of the install being complete, it shows: 'Error: Unable to proceed with the installation.' At that point the only option I'm given is to click 'Finish.' After clicking 'Finish,' Safari opens up to Adobe's website and gives me the option to either troubleshoot the installation or try it again. I've done both, yet neither are working.
    I first tried to just re-install it, but saw that I already had it installed, so that's when I tried updating it to the latest version. Since neither worked, I uninstalled Adobe flash and tried a clean install, but the same error appeared at about the same time during installation.
    Before I uninstalled Adobe Flash, I checked the version and it matched the latest, however, every page that uses flash says I need to install the update and prompts me to do so before continuing. Any advice will be much appreciated. Thanks in advance!

    See: How to perform a "clean install" of Flash Player in Mac OS X
    Unless you're using an older (PPC) Mac with OS 10.5 or older, those instructions should work.

  • Getting "an error occurred while preparing the installation" when trying to install Yosemite

    I have verified i meet all the requirements to upgrade my imac from snow leopard to yosemite. i have verified date is correct, and reset the NVRAM by holding Command+Option+P+R while rebooting. Keep getting same error "An error occurred while preparing the installation. Try running this application again." Any other suggestions would be greatly appreciated.
    Hardware Overview:
    Model Name: iMac
      Model Identifier: iMac8,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.66 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 6 MB
      Memory: 4 GB
      Bus Speed: 1.07 GHz
      Boot ROM Version: IM81.00C1.B00
      SMC Version (system): 1.29f1

    Try booting into the Safe Mode and installing Yosemite there.
    Safe Mode - About
    Safe Mode

  • Since installing yosemite my computer/screen blacks out, but still running

    Since installing yosemite last week, my computer/screen blacks out, but still running. I have since rebooted everything, started from scratch and utilizing my external drive transferred all files/apps back. Did not help, in fact it is getting worse. Computer screen blacks out every 5 min or so and have to power up again. Also, continue to get Java message updates even after all have been updated over and over again. Any suggestions? Thanks!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Installed Yosemite, now my MacBook Pro is running slow and the FileVault keeps saying estimating time remaining.

    I installed Yosemite and since then the system has been running slow.  I chose to use FileVault and it says it's encrypting but keeps saying estimating time remaining.  I've tried repair permission and restarting my computer.  Saw some other threads with similar problem and ran diskutil cs list which showed 80% the first time and now says failed.  I also did an Entre Check and here are the results. 
    Problem description:
    Mac running slow after installing Yosemite
    EtreCheck version: 2.0.6 (91)
    Report generated October 26, 2014 at 12:18:37 AM PDT
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2 GHz Intel Core i7 CPU: 4-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      AMD Radeon HD 6490M - VRAM: 256 MB
      Color LCD 1440 x 900
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 2 days 2:31:27
    Disk Information: ℹ️
      ST9500325ASG disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 498.88 GB (360.91 GB free)
      Encrypted AES-XTS UnlockedFailed
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-898 disk2 : (510.3 MB)
      S.M.A.R.T. Status: Verified
      disk2s1 (disk2s1) <not mounted> : 11 MB
      disk2s2 (disk2s2) <not mounted> : 15 MB
      disk2s3 (disk2s3) <not mounted> : 11 MB
      disk2s4 (disk2s4) <not mounted> : 12 MB
      disk2s5 (disk2s5) <not mounted> : 8 MB
      disk2s6 (disk2s6) <not mounted> : 11 MB
      disk2s7 (disk2s7) <not mounted> : 13 MB
      disk2s8 (disk2s8) <not mounted> : 14 MB
      disk2s9 (disk2s9) <not mounted> : 14 MB
      disk2s10 (disk2s10) <not mounted> : 15 MB
      disk2s11 (disk2s11) <not mounted> : 8 MB
      disk2s12 (disk2s12) <not mounted> : 9 MB
      disk2s13 (disk2s13) <not mounted> : 27 MB
      disk2s14 (disk2s14) <not mounted> : 16 MB
      disk2s15 (disk2s15) <not mounted> : 23 MB
      disk2s16 (disk2s16) <not mounted> : 12 MB
      disk2s17 (disk2s17) <not mounted> : 11 MB
      disk2s18 (disk2s18) <not mounted> : 24 MB
      disk2s19 (disk2s19) <not mounted> : 14 MB
      disk2s20 (disk2s20) <not mounted> : 18 MB
      disk2s21 (disk2s21) <not mounted> : 10 MB
      disk2s22 (disk2s22) <not mounted> : 36 MB
      disk2s23 (disk2s23) <not mounted> : 17 MB
      disk2s24 (disk2s24) <not mounted> : 20 MB
      disk2s25 (disk2s25) <not mounted> : 18 MB
      disk2s26 (disk2s26) <not mounted> : 42 MB
      disk2s27 (disk2s27) <not mounted> : 33 MB
      disk2s28 (disk2s28) <not mounted> : 29 MB
      disk2s29 (disk2s29) <not mounted> : 12 MB
      disk2s30 (disk2s30) <not mounted> : 6 MB
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/MacKeeper/AntiVirus.app
      [not loaded] net.kromtech.kext.AVKauth (2.3.7 - SDK 10.9) Support
      [not loaded] net.kromtech.kext.Firewall (2.3.7 - SDK 10.9) Support
      /System/Library/Extensions
      [loaded] com.Cycling74.driver.Soundflower (1.5.1) Support
    Problem System Launch Agents: ℹ️
      [failed] com.apple.AirPlayUIAgent.plist
      [failed] com.apple.CallHistoryPluginHelper.plist
      [failed] com.apple.CallHistorySyncHelper.plist
      [failed] com.apple.cloudd.plist
      [failed] com.apple.coreservices.appleid.authentication.plist
      [failed] com.apple.EscrowSecurityAlert.plist
      [failed] com.apple.icloud.fmfd.plist
      [failed] com.apple.nsurlsessiond.plist
      [failed] com.apple.printtool.agent.plist
      [failed] com.apple.recentsd.plist
      [failed] com.apple.scopedbookmarkagent.xpc.plist
      [failed] com.apple.secd.plist
      [failed] com.apple.security.cloudkeychainproxy.plist
      [failed] com.apple.spindump_agent.plist
      [failed] com.apple.telephonyutilities.callservicesd.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.AssetCacheLocatorService.plist
      [failed] com.apple.awdd.plist
      [failed] com.apple.corestorage.corestoragehelperd.plist
      [failed] com.apple.ctkd.plist
      [failed] com.apple.GSSCred.plist
      [failed] com.apple.icloud.findmydeviced.plist
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.nehelper.plist
      [failed] com.apple.nsurlsessiond.plist
      [failed] com.apple.periodic-daily.plist
      [failed] com.apple.softwareupdate_download_service.plist
      [failed] com.apple.systemstats.analysis.plist
      [failed] com.apple.wdhelper.plist
      [failed] com.apple.xpc.smd.plist
    Launch Agents: ℹ️
      [invalid?] com.sophos.uiserver.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [invalid?] com.sophos.intercheck.plist Support
      [invalid?] com.sophos.notification.plist Support
      [running] com.zeobit.MacKeeper.AntiVirus.plist Support
      [running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.google.keystone.agent.plist Support
      [running] com.plexapp.helper.plist Support
      [running] com.zeobit.MacKeeper.Helper.plist Support
    User Login Items: ℹ️
      iTunesHelper UNKNOWNHidden (missing value)
      Microsoft AU Daemon Application (/Applications/Microsoft AutoUpdate.app/Contents/MacOS/Microsoft AU Daemon.app)
      Canon IJ Network Scanner Selector2 ApplicationHidden (/Library/Printers/Canon/IJScanner/Utilities/Canon IJ Network Scanner Selector2.app)
      Canon IJ Network Scan Utility Application (/Library/Printers/Canon/BJPrinter/Utilities/Canon IJ Network Scan Utility.app)
      AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Internet Plug-ins: ℹ️
      JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
    User Internet Plug-ins: ℹ️
      Move_Media_Player: Version: npmnqmp 071505000006 Support
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Mobile backups: ON
      Auto backup: YES
      Destinations:
      GoFlex Home Backup [Network]
      Total size: 3 TB
      Total number of backups: 70
      Oldest backup: 2013-07-21 16:39:58 +0000
      Last backup: 2014-10-17 01:49:13 +0000
      Size of backup disk: Excellent
      Backup size 3 TB > (Disk size 0 B X 3)
    Top Processes by CPU: ℹ️
          5% WindowServer
          1% diskimages-helper
          0% backupd
          0% AppleSpell
          0% fontd
    Top Processes by Memory: ℹ️
      172 MB com.apple.WebKit.WebContent
      116 MB backupd
      77 MB Dock
      52 MB Finder
      47 MB com.apple.WebKit.Networking
    Virtual Memory Information: ℹ️
      48 MB Free RAM
      1.08 GB Active RAM
      1.04 GB Inactive RAM
      1.19 GB Wired RAM
      33.41 GB Page-ins
      1.26 GB Page-outs

    Please answer as many of the following questions as you can. You may already have answered some of them; in that case, there's no need to repeat the answers.
    Restart the router and the broadband device, if they're separate. Any change?
    Run Software Update and install all available updates for OS X or the computer's firmware. Any change?
    Are you connected to Ethernet as well as Wi-Fi? If so, disconnect the Ethernet cable or adapter and test.
    If possible, connect to the router with an Ethernet cable and turn off Wi-Fi. Any difference?
    If you can connect to more than one network, are they all the same?
    Are all network applications affected, or only some? If only some, which ones?
    Is networking always the same, or is the problem intermittent?
    Disconnect all other devices from the network. Any change?
    If you're running a MacBook with the lid closed, open the lid. Any difference?
    Start up in safe mode and test. Any difference?
    Start up in Recovery mode. From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Any difference?
    If possible, turn off Bluetooth and disconnect any USB 3 devices. Any difference?

  • Since installing Yosemite my Quarkxpress 10 is not running correctly. Too slow or crashes. How do I uninstall Os X Yosemite without losing all of my designs?

    Since installing Yosemite my Quarkxpress 10 is not running correctly. Too slow or crashes. How do I uninstall Os X Yosemite without losing all of my designs?

    Thank you Thomas
    First, for changing my question to the right forum. I am new on this and wasn't aware I was in the wrong forum.
    Secondly, even though my initial question is not answered as in: I just want to remove Classic, what you say is right. I think now, after writing my long question and seeing your answers, that I should start from scratch.
    To answer your question, I bought the new drive to be able to store and back up into DVDs and CDs all the photographs and movies that are still in the computer. I also need to make CDs of my portfolio since I am trying to find a new job and buying a new Mac at this point is out of the question. To upgrade the computer: I just do not have use for OS 9 anymore; I cannot upgrade to the latest Java, Safari or have issues with Flash or other programs; the programs that I have and need will still run perfectly fine or better in Leopard. And even if I could buy another computer I would still like to hang onto this computer for a while.

  • SharePoint Foundation 2010, hotfix install fail "An error occurred while running detection"

    Hi all,
    I am having a lot of trouble installing hotfix 2849990 on my server. After running it shows the error "An error occurred while running detection". I tried another hotfix as well but got the same result. I read on the web to do a "repair"
    but I cannot seem to access that. I attempting to run the install to get there, I click "Install SharePoint Foundation" a new window begins and I can see a new window open that reads "Please wait while setup prepares the necessarily files"
    Very shortly after this opens, it then closes and nothing else happens. 
    Anybody have any suggestions?
    Thanks!

    Thanks for the quick reply. Here is the Folder I am looking in:
    "C:\Users\[My User]\AppData\Local\Temp\2" Let me know if this is incorrect.
    Here is some of my opatchinstall log:
    OPatchInstall: Logging all properties
    OPatchInstall: Property 'PACKAGE.KBARTICLE' value '2880975'
    OPatchInstall: Property 'PACKAGE.MIN.MSI.VER' value '3.1.0.0'
    OPatchInstall: Property 'PACKAGE.NAME' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition'
    OPatchInstall: Property 'PACKAGE.PATH.TEMP' value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp'
    OPatchInstall: Property 'PACKAGE.PLATFORM' value '64-Bit Edition'
    OPatchInstall: Property 'PACKAGE.PRODUCTNAME' value 'Microsoft SharePoint Foundation 2010'
    OPatchInstall: Property 'PACKAGE.PROMPT.ALREADYINSTALLED' value 'The update is already installed on this system.'
    OPatchInstall: Property 'PACKAGE.PROMPT.CONFIG.AFTERUPDATE' value 'You must install the same SharePoint 2010 Products and patches on every server in your server farm. If you have multiple servers in your farm, please immediately install the same patches on all the other farm servers once this installation has completed.'
    OPatchInstall: Property 'PACKAGE.PROMPT.DETECTIONERROR' value 'An error occurred while running detection.'
    OPatchInstall: Property 'PACKAGE.PROMPT.DETFAILED' value 'The detection failed, this can be due to a corrupted installation database.'
    OPatchInstall: Property 'PACKAGE.PROMPT.ERROR.WITHKB' value 'The installation of this package failed. Please see for more information.'
    OPatchInstall: Property 'PACKAGE.PROMPT.EULA' value 'You must accept the Microsoft Software License Terms in order to continue the installation.'
    OPatchInstall: Property 'PACKAGE.PROMPT.EXTRACTFAILURE' value 'The extraction of files from this package failed.'
    OPatchInstall: Property 'PACKAGE.PROMPT.EXTRACTFOLDER' value 'Select a folder to store the extracted files'
    OPatchInstall: Property 'PACKAGE.PROMPT.INITIAL' value 'Do you wish to proceed with the installation?'
    OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLCANCELED' value 'The installation of this package was canceled.'
    OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLFAILURE' value 'The installation of this package failed.'
    OPatchInstall: Property 'PACKAGE.PROMPT.INSTALLSUCCESS' value 'The installation is complete.'
    OPatchInstall: Property 'PACKAGE.PROMPT.NOPRODUCTSPRESENT' value 'There are no products affected by this package installed on this system.'
    OPatchInstall: Property 'PACKAGE.PROMPT.NOTADMINUSER' value 'You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation.'
    OPatchInstall: Property 'PACKAGE.PROMPT.NOTMINMSIVERSION' value 'This program requires Windows Installer 3.1.0.0 (or greater).'
    OPatchInstall: Property 'PACKAGE.PROMPT.NOTNEEDED' value 'This package is not needed for the current release of the installed product.'
    OPatchInstall: Property 'PACKAGE.PROMPT.PATCHEDBYADMIN' value 'The update cannot be installed due to a previous update was installed through a modified installation source.'
    OPatchInstall: Property 'PACKAGE.PROMPT.PRODUCTVERSIONFAILURE' value 'The expected version of the product was not found on the system.'
    OPatchInstall: Property 'PACKAGE.PROMPT.REBOOTNEEDED' value 'Do you want to reboot now to complete the installation of this package?'
    OPatchInstall: Property 'PACKAGE.PROMPT.RM.CONFIRM' value '&OK'
    OPatchInstall: Property 'PACKAGE.PROMPT.RM.DETECTION' value 'Please wait while we determine the list of files that need to be updated.'
    OPatchInstall: Property 'PACKAGE.PROMPT.RM.DISABLE' value 'Do &not close applications. (A Reboot will be required.)'
    OPatchInstall: Property 'PACKAGE.PROMPT.RM.ENABLE' value 'Automatically &close applications and attempt to restart them after setup is complete.'
    OPatchInstall: Property 'PACKAGE.PROMPT.RM.OPERATION' value 'The following applications should be closed before continuing the install:'
    OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.DETAILSPREBODY' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition failed to install.'
    OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.GENERALAPPNAME' value 'Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition'
    OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.GENERALREPORTEE' value 'Microsoft'
    OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.INTROREG' value 'We apologize for the update installation failure'
    OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINCAPTION' value 'Report Hotfix for Microsoft SharePoint Foundation 2010 (KB2880975) 64-Bit Edition Installation Failure'
    OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAININTROBOLD' value 'An error report containing information about the updates that failed installation has been generated.'
    OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINNOREPORTBTN' value 'Cancel'
    OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINPLEAREG' value 'Using the information in the report we can investigate and potentially fix the problem you experienced. We will treat this report as confidential and anonymous.'
    OPatchInstall: Property 'PACKAGE.PROMPT.WATSON.MAINREPORTBTN' value 'Send Report'
    OPatchInstall: Property 'PACKAGE.RM.ENABLED' value '0'
    OPatchInstall: Property 'PACKAGE.RM.MINOS.VERSION' value '600'
    OPatchInstall: Property 'PACKAGE.STRING.CANCEL' value '&Cancel'
    OPatchInstall: Property 'PACKAGE.STRING.CANCELCONFIRMATION' value 'Are you sure you want to cancel setup?'
    OPatchInstall: Property 'PACKAGE.STRING.CONTINUE' value '&Continue'
    OPatchInstall: Property 'PACKAGE.STRING.DETECTING' value 'Please wait while update detection is being run.'
    OPatchInstall: Property 'PACKAGE.STRING.EULACHECKBOX' value 'Click here to &accept the Microsoft Software License Terms.'
    OPatchInstall: Property 'PACKAGE.STRING.EXTRACTING' value 'Extracting files, please wait...'
    OPatchInstall: Property 'PACKAGE.STRING.HELP' value 'Usage:
    /extract:path, extracts the content of the package to the path folder
    /log[:path to log file], enables verbose logging for the update installation
    /lang:lcid, sets the user interface to the specified locale when multiple locales are available within the package
    /quiet, runs the package in silent mode
    /passive, runs the update without any interaction from the user
    /norestart, prevents prompting of user when reboot of machine is needed
    /forcerestart, forced restart of machine once update is complete
    /?, shows this help message'
    OPatchInstall: Property 'PACKAGE.STRING.INSTALLING' value 'Please wait while the update is installed.'
    OPatchInstall: Property 'PACKAGE.SUCCESS.WITHERRORS' value 'The installation is complete. However, some updates were not applied (please see the log for additional details).'
    OPatchInstall: Property 'PATCH.FILEID.EULA' value 'volumelicense_eula_postrtm_en-us.txt'
    OPatchInstall: Property 'PATCH.LANG' value '1033'
    OPatchInstall: Property 'SYS.ARGS.EXTRACT' value '0'
    OPatchInstall: Property 'SYS.ARGS.EXTRACTPATH' value 'NONE'
    OPatchInstall: Property 'SYS.ARGS.EXTRACTPATHREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.EXTRACTREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.FORCERESTART' value '0'
    OPatchInstall: Property 'SYS.ARGS.FORCERESTARTREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.HELP' value '0'
    OPatchInstall: Property 'SYS.ARGS.HELPREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.LANG' value '0'
    OPatchInstall: Property 'SYS.ARGS.LANGREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.LANGVALUE' value 'NONE'
    OPatchInstall: Property 'SYS.ARGS.LANGVALUEREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.LOG' value '1'
    OPatchInstall: Property 'SYS.ARGS.LOGPATH' value 'NONE'
    OPatchInstall: Property 'SYS.ARGS.LOGPATHREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.LOGREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.NORESTART' value '0'
    OPatchInstall: Property 'SYS.ARGS.NORESTARTREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.PASSIVE' value '0'
    OPatchInstall: Property 'SYS.ARGS.PASSIVEREADONLY' value '0'
    OPatchInstall: Property 'SYS.ARGS.QUIET' value '0'
    OPatchInstall: Property 'SYS.ARGS.QUIETREADONLY' value '0'
    OPatchInstall: Property 'SYS.ERROR.ARG1' value 'NONE'
    OPatchInstall: Property 'SYS.ERROR.ARG2' value 'NONE'
    OPatchInstall: Property 'SYS.ERROR.ARG3' value 'NONE'
    OPatchInstall: Property 'SYS.ERROR.ARG4' value 'NONE'
    OPatchInstall: Property 'SYS.ERROR.ARG5' value 'NONE'
    OPatchInstall: Property 'SYS.ERROR.CODE' value '0'
    OPatchInstall: Property 'SYS.ERROR.INERROR' value '0'
    OPatchInstall: Property 'SYS.ERROR.TYPE' value 'NONE'
    OPatchInstall: Property 'SYS.LANG.LCID' value '1033'
    OPatchInstall: Property 'SYS.LANG.NAME' value 'en-us'
    OPatchInstall: Property 'SYS.LANG.RTL' value '0'
    OPatchInstall: Property 'SYS.MSI.VER' value '5.0.7601.17807'
    OPatchInstall: Property 'SYS.PATCH.NEEDREBOOT' value '0'
    OPatchInstall: Property 'SYS.PATCH.SUGGESTREBOOT' value '0'
    OPatchInstall: Property 'SYS.PROC.RESULT' value '0'
    OPatchInstall: Property 'SYS.WIN.ARCHITECTURE' value 'X64'
    OPatchInstall: Property 'SYS.WIN.PACKAGEPATH' value 'C:\Users\Svcsandspfarm\Desktop\ubersts2010-kb2880975-fullfile-x64-glb.exe'
    OPatchInstall: Property 'SYS.WIN.PLATFORM' value 'WINNT'
    OPatchInstall: Property 'SYS.WIN.SHELLVER' value '6.1.7601.18429'
    OPatchInstall: Property 'SYS.WIN.SPLEVEL' value '100'
    OPatchInstall: Property 'SYS.WIN.SYSTEMLCID' value '1033'
    OPatchInstall: Property 'SYS.WIN.USERADMIN' value '1'
    OPatchInstall: Property 'SYS.WIN.USERLCID' value '1033'
    OPatchInstall: Property 'SYS.WIN.VER' value '601'
    OPatchInstall: End of all properties
    OPatchInstall: Setting system property 'SYS.ARGS.LOGREADONLY' with value '1'
    OPatchInstall: Setting system property 'SYS.ARGS.LOGPATH' with value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\opatchinstall(6).log'
    OPatchInstall: Setting system property 'SYS.ARGS.LOGPATHREADONLY' with value '1'
    OPatchInstall: Done executing the IfFalse list
    OPatchInstall: CActionIf::execute ends
    OPatchInstall: Done executing the IfTrue list
    OPatchInstall: CActionIf::execute ends
    OPatchInstall: Done executing action
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.LOG' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'LOGPATH' to value '$(fullPath:SYS.ARGS.LOGPATH)'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: Executing action
    OPatchInstall: CActionIf::execute starts
    OPatchInstall: Begin evaluation of the condition
    OPatchInstall: The property 'SYS.ARGS.LOG' is equal to '1'
    OPatchInstall: Evaluation of the condition complete, the result is true
    OPatchInstall: Executing the IfTrue list
    OPatchInstall: Setting property 'LOGPATH' to value 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\opatchinstall(6).log'
    OPatchInstall: Done executing the IfTrue list
    OPatchInstall: CActionIf::execute ends
    OPatchInstall: Done executing action
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionExtractFile
    OPatchInstall: CActionExtractFile::initFromElement starts
    OPatchInstall: Will extract the file with ID '$(PATCH.FILEID.EULA)' to the path '$(PACKAGE.PATH.TEMP)\eula.txt'
    OPatchInstall: CActionExtractFile::initFromElement ends
    OPatchInstall: Executing action
    OPatchInstall: CActionExtractFile::execute starts
    OPatchInstall: Will extract the file with ID 'volumelicense_eula_postrtm_en-us.txt' to the path 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp\eula.txt'
    OPatchInstall: Getting the data from the file 'C:\Users\Svcsandspfarm\Desktop\ubersts2010-kb2880975-fullfile-x64-glb.exe'
    OPatchInstall: Successfully retrieved the data location and size
    OPatchInstall: CActionExtractFile::execute ends
    OPatchInstall: Done executing action
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: Executing action
    OPatchInstall: CActionIf::execute starts
    OPatchInstall: Begin evaluation of the condition
    OPatchInstall: Executing CConditionBooleanOperator::evaluate
    OPatchInstall: The property 'SYS.ERROR.INERROR' exists
    OPatchInstall: The property 'SYS.ERROR.INERROR' is not equal to '1'
    OPatchInstall: Evaluation of the condition complete, the result is false
    OPatchInstall: Executing the IfFalse list
    OPatchInstall: Done executing the IfFalse list
    OPatchInstall: CActionIf::execute ends
    OPatchInstall: Done executing action
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'PACKAGE.NOEULA.PROMPT' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'PACKAGE.NOEULA.PROMPT' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPromptEULA
    OPatchInstall: CActionPromptEULA::initFromElement starts
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: No Accept button specified
    OPatchInstall: Cancel button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionPromptEULA::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPromptEULA
    OPatchInstall: CActionPromptEULA::initFromElement starts
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: No Accept button specified
    OPatchInstall: Cancel button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionPromptEULA::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: Executing action
    OPatchInstall: CActionIf::execute starts
    OPatchInstall: Begin evaluation of the condition
    OPatchInstall: The property 'SYS.ARGS.PASSIVE' is equal to '0'
    OPatchInstall: Evaluation of the condition complete, the result is true
    OPatchInstall: Executing the IfTrue list
    OPatchInstall: CActionIf::execute starts
    OPatchInstall: Begin evaluation of the condition
    OPatchInstall: The property 'PACKAGE.NOEULA.PROMPT' doesn't exist
    OPatchInstall: Evaluation of the condition complete, the result is false
    OPatchInstall: Executing the IfFalse list
    OPatchInstall: CActionPromptEULA::execute starts
    OPatchInstall: Running in full UI, will show the EULA dialog
    OPatchInstall: Reading EULA from file 'C:\Users\SVCSAN~2\AppData\Local\Temp\2\OWPBBC.tmp\eula.txt'
    OPatchInstall: User Accepted the EULA, executing the Accept action list
    OPatchInstall: Finished executing the Accept action list
    OPatchInstall: CActionPromptEULA::execute ends
    OPatchInstall: Done executing the IfFalse list
    OPatchInstall: CActionIf::execute ends
    OPatchInstall: Done executing the IfTrue list
    OPatchInstall: CActionIf::execute ends
    OPatchInstall: Done executing action
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACT' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListOr>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACTPATH' to ''
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.EXTRACTPATH' to 'NONE'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPromptFolder
    OPatchInstall: CActionPromptFolder::initFromElement starts
    OPatchInstall: Will prompt the user with the title '$(PACKAGE.PROMPT.EXTRACTFOLDER)' and store the folder in 'PACKAGE.EXTRACT.FOLDER' if cancelled will set 'PACKAGE.FOLDER.CANCELED'
    OPatchInstall: CActionPromptFolder::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'PACKAGE.FOLDER.CANCELED' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'PACKAGE.FOLDER.CANCELED' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17023'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLCANCELED)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionCreateFolder
    OPatchInstall: CActionFile::initFromElement starts
    OPatchInstall: Will check for file '$(PACKAGE.EXTRACT.FOLDER)'
    OPatchInstall: CActionFile::initFromElements ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17024'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.EXTRACTFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-nb-no.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-nb-no.msp'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-nb-no.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-nb-no.xml'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-cy-gb.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-cy-gb.msp'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-cy-gb.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-cy-gb.xml'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-prs-af.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-prs-af.msp'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-prs-af.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-prs-af.xml'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-ro-ro.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ro-ro.msp'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-ro-ro.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ro-ro.xml'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-th-th.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-th-th.msp'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-th-th.xml' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-th-th.xml'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt
    OPatchInstall: CActionPrompt::initFromElement starts
    OPatchInstall: Will prompt with title '$(PACKAGE.NAME)
    OPatchInstall: Will prompt with text '$(PACKAGE.PROMPT.INSTALLFAILURE)
    OPatchInstall: No action list for quiet UI specified
    OPatchInstall: OK button specified, parsing actions
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: Finished parsing actions
    OPatchInstall: CActionPrompt::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQuit
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CActionIf::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionQueueExtractFile
    OPatchInstall: CActionQueueExtractFile starts
    OPatchInstall: Will extract the file with ID 'wssmui-ca-es.msp' to the path '$(PACKAGE.EXTRACT.FOLDER)\wssmui-ca-es.msp'
    OPatchInstall: CAtionQueueExtractFile ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionBooleanOperator<CConditionListAnd>
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionPropertyDefined
    OPatchInstall: CConditionPropertyDefined::initFromElement starts
    OPatchInstall: Will check if the property 'SYS.ERROR.INERROR' exists
    OPatchInstall: CConditionPropertyDefined::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ERROR.INERROR' to '1'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionSetProperty
    OPatchInstall: CActionSetProperty::initFromElement starts
    OPatchInstall: Will set the property 'SYS.PROC.RESULT' to value '17303'
    OPatchInstall: CActionSetProperty::initFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionIf
    OPatchInstall: CActionIf::initFromElement starts
    OPatchInstall: CConditionStatement::CreateStatementFromElement starts
    OPatchInstall: Creating statement CConditionEqual
    OPatchInstall: CConditionStatementComparison::initFromElement starts
    OPatchInstall: Will compare the property 'SYS.ARGS.PASSIVE' to '0'
    OPatchInstall: CConditionStatementComparison::initFromElement ends
    OPatchInstall: CConditionStatement::CreateStatementFromElement ends
    OPatchInstall: CAction::CreateActionFromElement started
    OPatchInstall: Creating CActionPrompt

  • Problem description: My Macbook air runs very slow since installed Yosemite a few days ago  EtreCheck version: 2.0.6 (91) Report generated October 24, 2014 at 12:07:13 GMT 3  Hardware Information: ️ MacBook Air (13-inch, Mid 2012) (Verified) MacBoo

    Problem description:
    My Macbook air runs very slow since installed Yosemite a few days ago
    EtreCheck version: 2.0.6 (91)
    Report generated October 24, 2014 at 12:07:13 GMT+3
    Hardware Information: ℹ️
      MacBook Air (13-inch, Mid 2012) (Verified)
      MacBook Air - model: MacBookAir5,2
      1 2 GHz Intel Core i7 CPU: 2-core
      8 GB RAM Not upgradeable
      BANK 0/DIMM0
      4 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      4 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en0: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000 -
      Color LCD 1440 x 900
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 0:15:57
    Disk Information: ℹ️
      APPLE SSD SM256E disk0 : (251 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 249.77 GB (28.85 GB free)
      Core Storage: disk0s2 250.14 GB Online
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Internal Memory Card Reader
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Applications/Parallels Access.app
      [loaded] com.parallels.virtualsound (1.0.27 27 - SDK 10.6) Support
      /Applications/Parallels Desktop.app
      [not loaded] com.parallels.kext.hidhook (9.0 24251.1052177) Support
      [not loaded] com.parallels.kext.hypervisor (9.0 24251.1052177) Support
      [not loaded] com.parallels.kext.netbridge (9.0 24251.1052177) Support
      [not loaded] com.parallels.kext.usbconnect (9.0 24251.1052177) Support
      [not loaded] com.parallels.kext.vnic (9.0 24251.1052177) Support
      /Library/Extensions
      [not loaded] org.virtualbox.kext.VBoxDrv (4.2.4) Support
      [not loaded] org.virtualbox.kext.VBoxNetAdp (4.2.4) Support
      [not loaded] org.virtualbox.kext.VBoxNetFlt (4.2.4) Support
      [not loaded] org.virtualbox.kext.VBoxUSB (4.2.4) Support
    Startup Items: ℹ️
      VirtualBox: Path: /Library/StartupItems/VirtualBox
      Startup items are obsolete and will not work in future versions of OS X
    Launch Agents: ℹ️
      [invalid?] com.cisco.anyconnect.gui.plist Support
      [invalid?] com.oracle.java.Java-Updater.plist Support
      [running] com.parallels.mobile.prl_deskctl_agent.launchagent.plist Support
      [invalid?] com.teamviewer.teamviewer.plist Support
      [invalid?] com.teamviewer.teamviewer_desktop.plist Support
      [loaded] org.macosforge.xquartz.startx.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.cisco.anyconnect.vpnagentd.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [invalid?] com.oracle.java.Helper-Tool.plist Support
      [running] com.parallels.mobile.dispatcher.launchdaemon.plist Support
      [loaded] com.parallels.mobile.kextloader.launchdaemon.plist Support
      [loaded] com.teamviewer.Helper.plist Support
      [invalid?] com.teamviewer.teamviewer_service.plist Support
      [loaded] org.macosforge.xquartz.privileged_startx.plist Support
    User Launch Agents: ℹ️
      [loaded] com.google.keystone.agent.plist Support
      [running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
      [running] com.parallels.mobile.startgui.launchagent.plist Support
      [not loaded] org.virtualbox.vboxwebsrv.plist Support
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Moveslink2 Application (/Applications/Moveslink2.app)
      Quicksilver Application (/Applications/Quicksilver.app)
      Google Drive Application (/Applications/Google Drive.app)
      Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
      Dropbox UNKNOWN (missing value)
      EvernoteHelper Application (/Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)
    Internet Plug-ins: ℹ️
      SharePointBrowserPlugin: Version: 14.1.3 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 Support
      QuickTime Plugin: Version: 7.7.3
      Default Browser: Version: 600 - SDK 10.10
    User Internet Plug-ins: ℹ️
      Google Earth Web Plug-in: Version: 7.1 Support
    Safari Extensions: ℹ️
      AdBlock
      OpenIE
      Facebook Photo Zoom
      Translate
      1-ClickWeather
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Flip4Mac WMV  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          7% WindowServer
          1% fontd
          1% Google Drive
          0% Microsoft Database Daemon
          0% AppleSpell
    Top Processes by Memory: ℹ️
      180 MB Google Drive
      86 MB mds_stores
      86 MB SyncServicesAgent
      86 MB Google Chrome
      86 MB Finder
    Virtual Memory Information: ℹ️
      2.25 GB Free RAM
      2.84 GB Active RAM
      2.56 GB Inactive RAM
      936 MB Wired RAM
      3.88 GB Page-ins
      74 KB Page-outs

    You have nearly run out of disk space.  Either purchase a larger one or start cleaning out the one you have?

  • Macbook Pro 2011 - running slow after installing Yosemite

    Can anyone help me - my late 2011 Macbook Pro is running very slow since installing Yosemite.  Also my Microsoft Office for Excel is not allowing me to type into cells - I can copy and paste but not add new text.
    I have run the Etre diagnostic app (as suggested on another thread) and these are the results I get. Can anyone help - or do I have to uninstall Yosemite and how would I do this?
    Problem description:
    Macbook running slow since installing Yosemite - cannot type in Office Excel spreadsheets at all
    EtreCheck version: 2.0.11 (98)
    Report generated 6 November 2014 19:04:01 GMT
    Hardware Information: ℹ️
      MacBook Pro (15-inch, Early 2011) (Verified)
      MacBook Pro - model: MacBookPro8,2
      1 2 GHz Intel Core i7 CPU: 4-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1333 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1333 MHz ok
      Bluetooth: Old - Handoff/Airdrop2 not supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 3000 - VRAM: 384 MB
      Color LCD 1440 x 900
      AMD Radeon HD 6490M - VRAM: 256 MB
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 2 days 19:30:17
    Disk Information: ℹ️
      Hitachi HTS547550A9E384 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 498.88 GB (392.29 GB free)
      Core Storage: disk0s2 499.25 GB Online
      HL-DT-ST DVDRW  GS31N 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /System/Library/Extensions
      [loaded] com.logmein.driver.LogMeInSoundDriver (4.1.46f31) Support
      [not loaded] com.novatelwireless.kext.wwan (3.0.15) Support
      [loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.74) Support
      [not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) Support
      /System/Library/Extensions/NovatelWirelessWWAN.kext/Contents/PlugIns
      [not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.15) Support
      [not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.15) Support
      [not loaded] com.novatelwireless.driver.3G (3.0.15) Support
      [not loaded] com.novatelwireless.driver.3GData (3.0.15) Support
      [not loaded] com.novatelwireless.driver.DisableAutoInstall (3.0.15) Support
      [not loaded] com.novatelwireless.driver.NWVBE (3.0.15) Support
    Problem System Launch Agents: ℹ️
      [failed] com.apple.CallHistoryPluginHelper.plist
      [failed] com.apple.coreservices.appleid.authentication.plist
      [failed] com.apple.icloud.fmfd.plist
      [failed] com.apple.security.cloudkeychainproxy.plist
      [failed] com.apple.spindump_agent.plist
    Problem System Launch Daemons: ℹ️
      [failed] com.apple.corestorage.corestoragehelperd.plist
      [failed] com.apple.ctkd.plist
      [failed] com.apple.ifdreader.plist
      [failed] com.apple.nehelper.plist
      [failed] com.apple.wdhelper.plist
      [failed] com.apple.xpc.smd.plist
    Launch Agents: ℹ️
      [running] com.logmein.logmeingui.plist Support
      [running] com.logmein.logmeinguiagent.plist Support
      [not loaded] com.logmein.logmeinguiagentatlogin.plist Support
      [running] com.rim.BBAlbumArtCacher.plist Support
      [running] com.rim.BBLaunchAgent.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [running] com.logmein.logmeinserver.plist Support
      [invalid?] com.logmein.raupdate.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [running] com.rim.BBDaemon.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.divx.agent.postinstall.plist Support
      [failed] com.facebook.videochat.[redacted].plist Support
      [loaded] com.google.keystone.agent.plist Support
      [running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
      [running] com.spotify.webhelper.plist Support
    User Login Items: ℹ️
      iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      Microsoft Database Daemon Application (/Applications/Microsoft Office 2011/Office/Microsoft Database Daemon.app)
      Dropbox Application (/Applications/Dropbox.app)
      Spotify Application (/Applications/Spotify.app)
      AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
      TomTomHOMERunner ApplicationHidden (/Users/[redacted]/Library/Application Support/TomTom HOME/TomTomHOMERunner.app)
      BlackBerry Device Manager ApplicationHidden (/Library/Application Support/BlackBerry/BlackBerry Device Manager.app)
      HPEventHandler UNKNOWN (missing value)
    Internet Plug-ins: ℹ️
      OVSHelper: Version: 1.1 Support
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      DivXBrowserPlugin: Version: 2.2 Support
      LogMeIn: Version: 1.0.935 - SDK 10.7 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      LogMeInSafari32: Version: 1.0.935 - SDK 10.7 Support
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version
    User Internet Plug-ins: ℹ️
      Picasa: Version: 1.0 Support
      Google Earth Web Plug-in: Version: 6.1 Support
    Safari Extensions: ℹ️
      Pin It Button
      LastPass
      AddThis
      DivX Plus Web Player HTML5 <video>
    3rd Party Preference Panes: ℹ️
      DivX  Support
      Flash Player  Support
    Time Machine: ℹ️
      Skip System Files: NO
      Auto backup: YES
      Volumes being backed up:
      Macintosh HD: Disk size: 498.88 GB Disk used: 106.59 GB
      Destinations:
      HD-PCU2 [Local]
      Total size: 499.76 GB
      Total number of backups: 6
      Oldest backup: 2014-05-30 10:03:08 +0000
      Last backup: 2014-09-23 17:43:37 +0000
      Size of backup disk: Adequate
      Backup size 499.76 GB > (Disk used 106.59 GB X 3)
    Top Processes by CPU: ℹ️
          7% WindowServer
          1% AddressBookSourceSync
          1% mds_stores
          1% Microsoft Outlook
          1% BBLaunchAgent
    Top Processes by Memory: ℹ️
      206 MB com.apple.WebKit.WebContent
      176 MB Safari
      82 MB mds_stores
      77 MB Microsoft Outlook
      77 MB Finder
    Virtual Memory Information: ℹ️
      32 MB Free RAM
      1.03 GB Active RAM
      1.01 GB Inactive RAM
      1.12 GB Wired RAM
      32.91 GB Page-ins
      1.30 GB Page-outs

    When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • System running ridiculously slow after installing Yosemite and Adobe CC

    SInce installing Yosemite and upgrading to Adobe CC for all my design apps, my computer runs soooooo slow. Since then, I've run all the disk utility stuff and upgraded from 8gb to 12gb of RAM. That about ends my knowledge. I ran EntreCheck with report below. Any insight on what to do would be HUGELY appreciated.
    Problem description:
    everything is running soooooooo slow.
    EtreCheck version: 2.1.8 (121)
    Report generated March 20, 2015 at 12:19:11 AM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️<etrecheck://help/hardware>
       iMac (27-inch, Mid 2010) (Technical Specifications)<http://support.apple.com/kb/SP695>
       iMac - model: iMac11,3
       1 2.8 GHz Intel Core i5 CPU: 4-core
       12 GB RAM Upgradeable
           BANK 0/DIMM0
               4 GB DDR3 1333 MHz ok
           BANK 1/DIMM0
               4 GB DDR3 1333 MHz ok
           BANK 0/DIMM1
               2 GB DDR3 1333 MHz ok
           BANK 1/DIMM1
               2 GB DDR3 1333 MHz ok
       Bluetooth: Old - Handoff/Airdrop2 not supported
       Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️<etrecheck://help/video>
       ATI Radeon HD 5750 - VRAM: 1024 MB
           iMac 2560 x 1440
    System Software: ℹ️<etrecheck://help/systemsoftware>
       OS X 10.10.2 (14C109) - Time since boot: 1:33:15
    Disk Information: ℹ️<etrecheck://help/disk>
       WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
           EFI (disk0s1) <not mounted> : 210 MB
           Macintosh HD (disk0s2) / : 999.35 GB (586.39 GB free)
           Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
       HL-DT-STDVDRW  GA32N
    USB Information: ℹ️<etrecheck://help/usb>
       Apple Inc. BRCM2046 Hub
           Apple Inc. Bluetooth USB Host Controller
       Apple Internal Memory Card Reader
       Apple Inc. Built-in iSight
       Apple Computer, Inc. IR Receiver
    Configuration files: ℹ️<etrecheck://help/configurationfiles>
       /etc/hosts - Count: 30
    Gatekeeper: ℹ️<etrecheck://help/gatekeeper>
       Mac App Store and identified developers
    Launch Agents: ℹ️<etrecheck://help/launchagents>
       [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]<http://www.google.com/search?q=com.adobe.AAM.Updater-1.0.plist+support+site:adob e.com>
       [loaded]    com.adobe.AdobeCreativeCloud.plist [Click for support]<http://www.google.com/search?q=com.adobe.AdobeCreativeCloud.plist+support+site:a dobe.com>
       [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]<http://www.google.com/search?q=com.adobe.CS5ServiceManager.plist+support+site:ad obe.com>
       [loaded]    com.google.keystone.agent.plist [Click for support]<http://www.google.com/search?q=com.google.keystone.agent.plist+support+site:goog le.com>
       [loaded]    com.hp.help.tocgenerator.plist [Click for support]<http://www.google.com/search?q=com.hp.help.tocgenerator.plist+support+site:hp.co m>
       [loaded]    com.intego.backupassistant.agent.plist [Click for support]<http://www.google.com/search?q=com.intego.backupassistant.agent.plist+support+si te:intego.com>
    Launch Daemons: ℹ️<etrecheck://help/launchdaemons>
       [loaded]    com.adobe.fpsaud.plist [Click for support]<http://www.google.com/search?q=com.adobe.fpsaud.plist+support+site:adobe.com>
       [loaded]    com.adobe.SwitchBoard.plist [Click for support]<http://www.google.com/search?q=com.adobe.SwitchBoard.plist+support+site:adobe.co m>
       [loaded]    com.google.keystone.daemon.plist [Click for support]<http://www.google.com/search?q=com.google.keystone.daemon.plist+support+site:goo gle.com>
       [running]    com.intego.BackupAssistant.daemon.plist [Click for support]<http://www.google.com/search?q=com.intego.BackupAssistant.daemon.plist+support+s ite:intego.com>
       [loaded]    com.quark.quarkupdate.plist [Click for support]<http://www.google.com/search?q=com.quark.quarkupdate.plist+support+site:quark.co m>
    User Launch Agents: ℹ️<etrecheck://help/userlaunchagents>
       [loaded]    com.adobe.ARM.[...].plist [Click for support]<http://www.google.com/search?q=com.adobe.ARM.78cc0ca4390391ccbf3e6ae7434b49da845 cbb801c17ced9d324e9da.plist+support+site:adobe.com>
       [running]    com.akamai.single-user-client.plist [Click for support]<http://www.google.com/search?q=com.akamai.single-user-client.plist+support+site: akamai.com>
       [failed]    com.apple.CSConfigDotMacCert-[...]@me.com<http://me.com>-SharedServices.Agent.plist
       [running]    com.spotify.webhelper.plist [Click for support]<http://www.google.com/search?q=com.spotify.webhelper.plist+support+site:spotify. com>
    User Login Items: ℹ️<etrecheck://help/loginitems>
       Spotify    Application Hidden (/Applications/Spotify.app)
    Internet Plug-ins: ℹ️<etrecheck://help/internetplugins>
       o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]<http://www.google.com/search?q=support+site:google.com>
       Google Earth Web Plug-in: Version: 7.1 [Click for support]<http://www.google.com/search?q=Google%20Earth%20Plugin.plugin+support+site:Googl e.com>
       Default Browser: Version: 600 - SDK 10.10
       CouponPrinter-FireFox: Version: Version 1.1.5
       AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 [Click for support]<http://www.google.com/search?q=support+site:AdobeAAMDetectLib.com>
       FlashPlayer-10.6: Version: 17.0.0.134 - SDK 10.6 [Click for support]<http://www.google.com/search?q=FlashPlayer-10.6+support+site:macromedia.com>
       Silverlight: Version: 5.1.20125.0 - SDK 10.6 [Click for support]<http://www.google.com/search?q=support+site:microsoft.com>
       Flash Player: Version: 17.0.0.134 - SDK 10.6 [Click for support]<http://www.google.com/search?q=Flash%20Player+support+site:macromedia.com>
       QuickTime Plugin: Version: 7.7.3
       googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]<http://www.google.com/search?q=support+site:google.com>
       iPhotoPhotocast: Version: 7.0
       AdobePDFViewer: Version: 9.5.5 [Click for support]<http://www.google.com/search?q=AdobePDFViewer+support+site:adobe.com>
       JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Check version<http://www.java.com/en/download/installed.jsp>
    3rd Party Preference Panes: ℹ️<etrecheck://help/preferencepanes>
       Akamai NetSession Preferences  [Click for support]<http://www.google.com/search?q=Akamai%20NetSession%20Preferences+support+site:yo urcompany.com>
       Flash Player  [Click for support]<http://www.google.com/search?q=Flash%20Player+support+site:adobe.com>
       Growl  [Click for support]<http://www.google.com/search?q=Growl+support+site:growl.com>
       Paragon NTFS for Mac ® OS X  [Click for support]<http://www.google.com/search?q=Paragon%20NTFS%20for%20Mac%20%C2%AE%20OS%20X+supp ort+site:paragon-software.com>
       Quark Update Preferences  [Click for support]<http://www.google.com/search?q=Quark%20Update%20Preferences+support+site:quark.c om>
    Time Machine: ℹ️<etrecheck://help/timemachine>
       Skip System Files: NO
       Auto backup: NO - Auto backup turned off
       Volumes being backed up:
           Macintosh HD: Disk size: 999.35 GB Disk used: 412.95 GB
       Destinations:
           LaCie [Local]
           Total size: 2.00 TB
           Total number of backups: 18
           Oldest backup: 2014-12-10 04:43:29 +0000
           Last backup: 2015-03-07 20:22:58 +0000
           Size of backup disk: Adequate
               Backup size 2.00 TB > (Disk used 412.95 GB X 3)
    Top Processes by CPU: ℹ️<etrecheck://help/cpu>
            1%    sysmond
            0%    fontd
            0%    Activity Monitor
            0%    SystemUIServer
            0%    mds
    Top Processes by Memory: ℹ️<etrecheck://help/memory>
       206 MB    mds_stores
       103 MB    WindowServer
       77 MB    Finder
       77 MB    com.apple.WebKit.WebContent
       64 MB    Activity Monitor
    Virtual Memory Information: ℹ️<etrecheck://help/vm>
       9.44 GB    Free RAM
       1.99 GB    Active RAM
       622 MB    Inactive RAM
       827 MB    Wired RAM
       1.87 GB    Page-ins
       0 B    Page-outs
    Diagnostics Information: ℹ️<etrecheck://help/diagnostics>
       Mar 19, 2015, 11:42:51 PM    /Library/Logs/DiagnosticReports/com.apple.WebKit.WebContent_2015-03-19-234251_[ redacted].hang
       Mar 19, 2015, 10:36:03 PM    Self test - passed
       Mar 18, 2015, 09:49:31 PM    /Library/Logs/DiagnosticReports/Microsoft Word_2015-03-18-214931_[redacted].hang
       Mar 18, 2015, 06:09:50 PM    /Library/Logs/DiagnosticReports/AdobeAcrobat_2015-03-18-180950_[redacted].hang
       Mar 18, 2015, 03:13:06 PM    /Library/Logs/DiagnosticReports/System Preferences_2015-03-18-151306_[redacted].hang
       Mar 18, 2015, 03:12:39 PM    /Library/Logs/DiagnosticReports/Spotify_2015-03-18-151239_[redacted].hang
       Mar 18, 2015, 03:10:52 PM    /Library/Logs/DiagnosticReports/Safari_2015-03-18-151052_[redacted].hang
       Mar 17, 2015, 10:39:53 PM    /Library/Logs/DiagnosticReports/Microsoft Word_2015-03-17-223953_[redacted].hang
       Mar 17, 2015, 08:28:02 AM    /Library/Logs/DiagnosticReports/Safari_2015-03-17-082802_[redacted].hang

    Thanks so much for the detailed instructions...but they didn't seem to work.
    At this point I've erased the drive and reinstalled Yosemite. I haven't brought any files or applications back in yet, but things are still moving really slow. Here's my latest EntreCheck report. Any insight would be very helpful.
    Problem description:
    sytstem, even after a bringing it back to factory settings, is still running really really slow
    EtreCheck version: 2.1.8 (121)
    Report generated March 22, 2015 at 11:23:25 PM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (27-inch, Mid 2010) (Technical Specifications)
        iMac - model: iMac11,3
        1 2.8 GHz Intel Core i5 CPU: 4-core
        12 GB RAM Upgradeable
            BANK 0/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 1/DIMM0
                4 GB DDR3 1333 MHz ok
            BANK 0/DIMM1
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM1
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        ATI Radeon HD 5750 - VRAM: 1024 MB
            iMac 2560 x 1440
    System Software: ℹ️
        OS X 10.10.2 (14C109) - Time since boot: 1:28:31
    Disk Information: ℹ️
        WDC WD1001FALS-40Y6A0 disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Macintosh HD (disk0s2) / : 999.35 GB (989.92 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        HL-DT-STDVDRW  GA32N 
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Apple Computer, Inc. IR Receiver
        Apple Internal Memory Card Reader
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    User Login Items: ℹ️
        None
    Internet Plug-ins: ℹ️
        Default Browser: Version: 600 - SDK 10.10
        QuickTime Plugin: Version: 7.7.3
    3rd Party Preference Panes: ℹ️
        None
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
             2%    WindowServer
             0%    launchd
             0%    dpd
    Top Processes by Memory: ℹ️
        155 MB    mds_stores
        129 MB    softwareupdated
        103 MB    Dock
        64 MB    Finder
        64 MB    com.apple.WebKit.WebContent
    Virtual Memory Information: ℹ️
        8.51 GB    Free RAM
        2.13 GB    Active RAM
        1.24 GB    Inactive RAM
        1.00 GB    Wired RAM
        2.36 GB    Page-ins
        0 B    Page-outs
    Diagnostics Information: ℹ️
        Mar 22, 2015, 09:49:57 PM    Self test - passed

Maybe you are looking for

  • How do i plot with the operating system time in one plot and show lines between cursors in another using the same XY graph?

    I am having some trouble graphing two plots at once. One plot is to show the current temperature inside a chamber as a function of time. I am trying to pick the current time and temperature each second and plot it with each point being connected by a

  • Photoshop Elements 6.0 Restore catalog issue

    Okay...I am a novice here...but I have been using Elements since 3.0.  I had my computer setup to backup my catalog in incremental steps to an external hard drive.  I just reformatted my computer (Vista...UGH!)  and now when I restore the catalog per

  • Can't copy music to 5S properly - 95% remaining greyed out

    Hi, I've just got an iPhone 5s and I don't seem to be able to copy music across to it - well I can, but only an arbitrary selection, and strangely appears to be the same songs it allows rather than entirely random. I can physically drag and drop the

  • Need help with formatting a number

    hi all, the problem i am having has been a hot topic over time in java. i have an integer say 123. i want to convert this to a string of 10 characters. how do i pad the first seven spaces with blanks. ex. " 123" in c++ you can use sprintf. how do i d

  • Help: DDIC Lock object

    Hi All, I have doubt about lock object, when we create lock object ENQUEUE_OBJ AND DEQUEUE_OBJ also gets created but what about transporting it? should we transport it saparately or automatically its get transported? Thx.