Is it the hard drive? and battery? What's up with my specs? 3 threads?
My battery had not been fully recharging for a while. For weeks, it would "max out" at a lower percentage, lowering incrementally pretty much weekly. No, I am not eligible for the recall.
One fitful night, I came home to a shut down computer. When it powered on, I heard a very loud hard drive and saw a prohibitive sign, the "no smoking sign" as I called it. After several such attempts, I went for the included in purchase CDs, which I hadn't seen since I bought it/
I can start from the restore CD and have faced some varying results.
Most of the time, I can't see the hard drive as an option to install Mac Os X 10.3 ish. Once, I was able to see and select the hard drive. All got stuck after it told me that I would have to change installation options since I had a newer version of Mac Os X. (I read in maxoshints that someone uses his freezer and toaster to manipulate temperatures in order to rescue data from Mac hard drives.)
Both Startup Disk and Disk Utility saw the hard drive that one time since the fitful night.
An Apple store "Genius" had agreed with me that the hard drive was busted, but now I can see 74.5 GB TOSHIBA MK8025GAS in the list on the left. It does not show any volumes under it, like the 3.9 GB CD does (iBook Software). I can "info" and see that it even has a device tree.
I cannot drag and drop to Restore. RAID and Partition do not seem to apply.
Erase seems my best option and it seems to have been able to "write zeros" but not "8 track randomize."
...I am now trying to "partition" and I can see the progress bar waving, not progressing. Clicking on other tabs makes them flash, but not dominate the window. I am able to use the menu bar and quit, which prompts me that I am interrupting. The screen fades and the computer stops making noise after a long time, but still no progress.
Please advise. What should I do? What can I do? I have begun trying to learn about hard drives, but find the technology convoluted. I can't sort out my choices.... for example, when I try and look up my specs, I can't find an A1054 on apple's website. There's a M9623LL/A .
I'm typing this on a M9846LL/A, which is actually an A1133?!!?
The A1054 is a refurb, but the A1133 is not.
Bonus points for helping me understand, progress toward goal of working computer!
Welcome to the Apple Discussions!
My battery had not been fully recharging for a while. For weeks, it would "max out" at a lower percentage, lowering incrementally pretty much weekly. No, I am not eligible for the recall.
Besides your other issues, it may simply be time for a new battery. The batteries not only have a limited number of complete charge cycles, they also have a shelf life that could expire even if you've never used it. Here is a little bit of information from Apple on batteries:
http://www.apple.com/batteries/
http://www.apple.com/batteries/notebooks.html
As far as your hard drive is considered, I'm guessing you don't have an AppleCare Protection Plan? It really does sound like the hard drive is failing. Have you started up from your Apple Hardware Test disk yet and run the extended tests?
If you decide to replace your hard drive that's out of warranty, you just need a 2.5" IDE/ATA hard drive that's less than 9.5mm tall. (This is a standard configuration for notebooks.) While it's possible to install yourself, it's quite the operation and you may want to take your iBook to an Apple Authorized Service Provider to do it for you. Or you might consider sending your iBook in to a service like MCE Technologies to do it for you.
-Doug
Similar Messages
-
I have one HDMI port on my television that is currently used for my hard drive/free view box. What kind of adaptor can I buy so I can have the hard drive and my apple tv device plugged into the same HDMI PORT? Is it a switch or a splitter? And where is it best to buy one? Thanks!
Welcome to the Apple Community.
You need an HDMI switch. -
I purchased a used 1st Gen Time Capsule with a 1 tb hard drive.
When I plugged it in and did the initial setup, it worked fine, but gave me a hard drive error. A few minutes later the green light turned solid orange, then blinking orange, then the status light went off. The lights in back stayed on.
I removed the hard drive and rebooted, it turned green for 5-10 minutes then reverted back to a solid orange, blinking orange, then went off.
Next I purchased a remanufactured internal power supply, and installed it (without the hard drive in). It turned green almost immediately. After about 15-20 minutes, I decided to try to install the hard drive again, booted it up, and tried to erase the hard drive with was working properly according to the software. It stopped erasing the disc after about 20 minutes and turned solid orange again, then blinking, then no status light (but back lights were still lit).
I'm a bit flabbergasted at this point, any suggestions on what to do next? I think i've pretty much replaced everything except the logic board, but can't seem to find any information on the symptoms of a logic board malfunction.
Thanks!!!!!!!A Gen3 is identical board to a Gen4 although they have some differences in firmware and wireless card was updated on every model.. but a Gen3 is substantially faster than Gen1, Gen2 which also have identical boards.
You can with careful shopping get a Gen3 pretty cheap.
Most use a delta power supply which I think is a lot better than the flextronics used in most Gen1/2
You can sell back the parts to ebay.. people still would buy the power supply etc. Even just the case can be useful to a repairer.
But if the board is gone.. it is hard to repair.. not impossible.. but hard.
Gen 3 and Gen 4 are not without faults.
See this page.
https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc
I have fixed it a different way.. by using the small converters you can buy in bulk from ebay for $1 each.. KIS3R33 .. they produce 3.3V at 2A peaking at 3A.. amazing.. I keep using them to replace onboard power converters by removing the inductor and simply power directly.. the end result has worked great. You can simply change the resistors around and get any output from 1v to 20v depending on input.
Is it worth doing it .. no of course not.. it will waste many more hours than $50 is worth.. but it is kind of fun that you can actually make things work again.
Here is a pic of the Gen 3 totally powered by me. All onboard power removed.
This was to track down the fault in the Gen3.. but I am kind of pleased that it ended up neat enough and reliable enough to work for more than a year.. the Gen3 still serves as a way to get Netflix via network for a friend running 24/7.
The units supply (from left to right)
1v, 1.1v, 3.3v, 5v, 1.8v
It is feed by 12v supply which is also directly connected to the hard disk.
So it is possible to fix.. !! Only got to be a bit crazy. -
Hello,
Thank you for taking a look at my problem. My Windows computer crashed so I removed the hard drive and installed it into a hard drive enclosure and connected it to my new Windows computer with a USB cord. I installed Mozilla Thunderbird on my new computer and read the different tutorials on this website for extracting data from the external hard drive and installing it on my new computer however I cannot seem to be able to find the files that I need and quite frankly I do not know how to move them once I do find them. I even tried MozBackup but it could not find the files either. I searched for profiles.ini in the hard drive and the only hit I got was a profiles.ini file that was 111 bytes in size. I assumed that this was not what I was looking for but I did save a copy on my desktop. If someone has experience with moving files from a hard drive to a new computer I would be grateful for the help.
Thanks,
ANlets get with the program. Mozbackup is useless in this situation because it looks for your profile in the location Thunderbird says it is.
You biggest hurdle is probably setting windows to show system and hidden files. The %appdata% folders are hidden by windows. -
I've had this issue for almost a month now, and they have tried multiple things to fix it from software re-installs to wiping the drive and they replaced the hard drive and cable but now that it is still not working they are suggesting installing another hard drive after it clearly didn't work the last time they replaced it. Help! I've contacted customer relations and the only thing she told me over and over is that they are working diligently to fix it. I'm a music teacher and that is currently the only computer i have and I use July to prep all my lesson plans and music. School starts august 18th and I feel like I'll be back in the store with the same problem again right when school starts. Any suggestions, ill probably be writing a letter very soon, any other suggestions?
Btw I have tried not backing up from time machine to rule out the possibility of something of mine corrupting it and it still did it.
Thanks for your help apple community!
DavidWholly Crap, No Joke, the lady from the apple store called me up at like 5pm and said "You know what?" and my reply was....... "what" and she goes, "You've been very patient and we understand you've been in and out in the last 3 weeks so we've decided to just give you a brand new computer" She gave me a brand new MBP! SO FREAKIN STOKED, my 2008 macbook pro for a new 2011 2.2ghz with 4 gigs of memory (Upgradeable to 8!!) The only downside is that since I use this for recording audio with Pro Tools well as recording audio with Pro Tools I needed the 7200rpm drive like my last one, and with her eyes i felt the "Beggars Cant be choosy" look flow upon me. But I shrugged it off and She actually told me to take this one, use it for the next week while the one she is ordering for me comes in!! So Bottom line IMHO (first time i've ever used that acronym in a forum) Apple Definitely has some awesome customer service!!
--this is one of those posts that I usually read and say "***, why cant that be me!!"
I <3 Apple.
David -
I have a 2007 Mac Book Pro and a Genius told me that it is "vintage" and that the "logic board" is bad and no longer supported. He removed the hard drive and told me to buy a "sled" to retreive the data. Is it worth trying to fix it so that I don't have to buy a new one? Where should I take it? Thanks.
djgornik,
if the Genius is correct and the logic board is bad, then replacing the logic board would be fairly expensive. What problems are you seeing with your MacBook Pro that caused you to visit the Genius in the first place? Whether it’s worth trying to fix it or not depends on your particular circumstances, such as your willingness to trade time for money in pursuing repair vs. replacement. -
I wiped the hard drive and lost lightroom...please help before wife kills me...
Hi folks! First post here so go easy on the newb...
Our computer got slammed with a virus a few days back and we had to wipe the hard drive and reinstall everything. So we lost lightroom. The original version we had was downloaded to begin with... so the only serial number we had was wiped with the rest of the hd. (bonehead, i know) We do have an upgrade serial number from when we upgraded our lightroom a while back, but it is useless without the "original SN#" which we don't have.
Is there anything we can do?
Thanks!
Daryl & HaleyTime to get paranoid. For the future, backup everything, especially serial numbers and the like. I have a program in which I store all passwords, logins, serial numbers, etc that I need. Of course it is encrypted and it takes a password to get into it, but that is only ONE password. It is a desktop/mobile application, so it gets synced with my phone. (We travel a lot, so I need this information when we travel). All downloaded products and associated stuff live on an external drive and are backed up to another external drive. There is another copy made occasionally that lives offsite. I put a text file in the "products" directory for each program in which I ALSO have the serial number and any additional information about installation -- like what you need to install an upgrade, etc. I have learned to be paranoid through experiences similar to yours...
I do admit though that the companies are getting much better about forgotten serial numbers than they used to be, so it looks like you are saved this time.
I hope you have a copy of the database and the images? The images are truly irreplaceable, and the database is valuable.
Judy -
My 2009 MacBook Pro keeps restarting even after I wiped the hard drive and reinstalled OSX.
About a month ago, my laptop started to randomly turn off: I would be using either Chrome, Photoshop (the free CS2 version available from Adobe's website) or Powerpoint, and the screen would go blank. I would then have to hold the power button for a while until the little light at the front of the computer would flicker and it would restart. I brought it to the Mac Store where they tested it and said it looked fine. They suggested I erase my hard drive and reinstall OSX as a precaution.
Fast forward a month, I have been very busy with work and hadn't been able to fix this problem. It wasn't that bad, only once every couple of days, sometimes more, sometimes less, I could work despite this problem.
Then, I installed OSX Mavericks. The installation started in the morning, but, like an idiot, I paused it to go to work. Later on, I completed the installation, it looked fine, but then all day long my laptop would suddenly restart and go to a grey screen that said in multiple languages "Your laptop restarted because of a problem, press any button to continue the restart." A computer technician friend of mine checked it out and said it was probably due to the badly installed OSX and suggested that I erase my hard drive and reinstall OSX.
I backed up all my files, erased the hard drive and reinstalled OSX. Everything looked fine.
Then it happened again.
Any ideas of why this is happening?Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?
How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?
CS 5.0 launches the internet browser. > TO SLOW I DONT WANT THIS.
CS 3.0 uses the local help files > I WANT THIS FOR 5.0.You're not speaking to the right forum for your request. Help is a Suite-wide feature and here is the forum where the Help application is discussed, and where the proper Adobe people hang out:
Community Help Application -
On my Macbook pro 15, 2011, System Profiler is suggesting that it uses SATA III for the hard drive and SATA II for the Optical Drive. Is that true?
That is correct. The tech specs indicate:
Hard Drive Interface
6.0 Gbps Serial ATA (SATA)
Optical Drive Interface
3.0 or 6.0 Gbps Serial ATA (SATA) -
I have two iPhoto libraries: one on the hard drive, and one on an external hard drive. I cannot access the iPhoto library on the external hard drive. Yes, it is plugged in!
How are you trying to access the EHD library? Can you open it by launching iPhoto with the Option key held down and selecting the EHD library in the window that appears?
OT -
My HP computer's hard drive crashed. I have replaced the hard drive and reinstalled all of the software. I have copied my I tunes library from my backup hard drive to the new one. How do I restore the permissions? This is the 3 rd time I have had to do this. THe share screen says you are limited to 5 ??
No backup is not good.
You can transfer itunes purchases from an ipod. File>Transfer Purchases -
I upgraded the operating system on my MacBook Pro from Snow Leopard to Lion via the web. Now I need to erase the hard drive and restore it to factory settings, so that I can pass it on. How do I accomplish this? When I insert the Mac OS X install disk, the only option is to erase the free space. Any insight would be appreciated.
Thank youYou need to boot off the original Snow Leopard DVD's that came with the system.
Once you are running off of the DVD you will be able to do a clean install of SL
To boot off the DVD with the system up running Lion insert the DVD. Open Sytem Preferences->Startup Disk and select the DVD then restart the machine.
Message was edited by: Frank Caggiano -
I have a iMac 6,1 that I need to reformat the hard drive and reinstall Snow Leopard version 10.6.3 . How do I reformat ?
Boot the ssystem from the OS DVD. Once it is booted run Disk Utiltiy. Select OS Extrended (Journled)
See http://support.apple.com/kb/HT3910?viewlocale=en_US&locale=en_US -
On a macbook I purchased secondhand hard drive got corrupted and I started to get the flashing folder with the question mark, I purchased a new hard drive and snow lion install DVD I installed the hard drive and tried disc but kept getting blinking folder
Welcome to Apple Support Communities. We're users here and do not speak for "Apple Inc."
Power on the computer and insert the DVD immediately.
Hold down the 'C' key to boot from the Snow Leopard DVD.
http://support.apple.com/kb/ht1533
After selecting the appropriate language, if necessary, select Utilities, and Disk Utility.
You'll likely need to partition and format the new drive before it's recognized.
http://manuals.info.apple.com/MANUALS/0/MA161/en_US/MacBook_13inch_HardDrive_DIY .pdf
(Yes, these instructions ARE 7 years old, but the procedure is the same for installing from DVD media.) -
I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?
Many thanks lllaass,
The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
Cheers
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg
Maybe you are looking for
-
E-mail links from iCal event - not working in Yosemite
My workflow has always depended on dragging e-mails from Mail to iCal This generates link in ical event "Show in mail" - giving me option to find the e-mail with one click from iCal Since Yosemite install the links go wrong! I can generate several ev
-
Set value (TRUE, FALSE) on a checkbox
I want to set the value of a checkbox to FASLE when a second checkbox is checked (TRUE). Any idea?
-
How do I stop Itunes from jumping to the top every time I delete an artist?
Everytime I delete an artist from my Itunes, I am brought back to the top of my list and have to scroll down to where I left off, EVERY TIME. This is very frustrating.
-
Anyone out there having problems using service pack 9 for Weblogic application server 5.1? I install it, and get a slew of java.lang.NoClassDefFoundError, and java.util.MissingResourceException (from a resource bundle) errors. Its really quirky cause
-
Hi All, We are using BODS 3.2 on linux. How should we handle when a delimiter is present in the source data. For example: We have CSV file as the source, The file has comma ',' as part of the data in one of the columns. When we execute the job it thr