Is LabVIEW based on NI-DAQ ?

I want to get NI-DAQ for Linux.
Does Labview 7.0 full development version
for Linux include NI-DAQ ?

AndreyCherepenko wrote:
> Thanks Methis.
>
> Comedi lack of something functionality, is't
> reliability and is't ported to Windows yet.
Comedi never will be ported to Windows I would assume. Its
architecture is very Unix centric and porting to Windows
would be basically impossible without a complete redesign.
Comedi will be improved with new support for sure and it
will only get more stable if users are using it and providing
feedback and bugfixes.
> I look for crossplatform library to communicate
> with DAQ boards.
There are two options for you. The NI Measurement Hardware
DDK is supported on both Linux and Windows (and some other
systems too including MacOS X and the NI realtime platforms).
It is the low level and I mean "low level" API you
are probably
talking about and is basically the same on all platforms it
supports.
Another option might be to look into UEI as an alternative.
Their hardware has Windows and Linux drivers which I would
assume have the same API.
> By the way. OpenG do not concern to low level.
No, the OpenG library is a LabVIEW VI library to interface
to the Comedi library which handles the low level stuff.
It is possible to write a VI library which might call Comedi
but is for the rest compatible to the NI-DAQ VIs.
> It is just additional modules to LabVIEW.
> Is free version of LabVIEW for Linux ?
No, LabVIEW is a paid software license, Linux or not.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

  • LABVIEW based pda program to run in winCE

    for our purpose we need to read analog signals through different sensors which is connected to samsung s3c mini 2440 arm board. for this purpose we have some VB based example programs. but we need some example files of LABVIEW based pda program that to run in winCE os. so help me out
    m attaching the vb based source code of example files

    Duplicate Post.
    The best solution is the one you find it by yourself

  • Once running the labview program which contain DAQ Assistant ,the message of "ERROR-50405....." appear.

    Once running the labview program which contain DAQ Assistant and can be run without any error before, the message box of "ERROR-50405....." appear which capture down in the attachment. We use PCI6221 and LabVIEW 8.0 in Windows XP. I also found that the Device Manager of Window have recognized the PCI6221.
    Any help on this situation would be great.
    Attachments:
    labview error.JPG ‏145 KB

    Hi~
    This error is due to signal interference between the device and the computer. This could be environmental or due to the PCI Controller. You can on a different computer to see whether this problem persists.

  • How can I make LabView 6.1to detect DAQ NI-USB 6008

    I have a LabView version 6.1, recently I bought a new DAQ model NI-USB 6008, I could not use it with my Labview version. Please, how can I adapt my DAQ for version 6.1 or update my LabView to detect my DAQ? Please advise me to a free applicable solutions. Thanks very much

    The USB 6008 requires DAQmx which requires LabVIEW 7.0 or greater. The upgrade to 7.x (or the just released 8.0) is not free. The only other solution I've heard of is to use the Call Library Function Node to make your own calls to the DAQmx dll. This would not be for the faint of heart or anyone wishing to come up with a quick solution.

  • Article - LabVIEW-Based Utility to Package & Deploy MS SQL Server 2005 Express Edition Databases

    Anthony Lukindo, the newest ExpressionFlow blog LabVIEW community author, has just published the first part of his two-part blog article
    LabVIEW-Based Utility to Package & Deploy MS SQL Server 2005 Express Edition Databases - Part 1
    Please check it out!
    Tomi Maila

    Anthony Lukindo, the newest ExpressionFlow blog LabVIEW community author, has just published the first part of his two-part blog article
    LabVIEW-Based Utility to Package & Deploy MS SQL Server 2005 Express Edition Databases - Part 2
    Please check it out!
    Tomi Maila

  • Feedback on "Labview based Advanced Instrumentation Systems"

    Should on add he book "Labview based Advanced Instrumentation Systems"
    by Sumathi and Surekha to a collection of Labview Books? How would
    you compare it "Labview for Everyone" by Travis and Kring?
    Howard

    Hi Howard,
    Travis and Kring is a classic Labview book and always recommended. We have not really looked at the other book but after looking inside it looks like it some good applications and examples. It really depends on what you are looking for--for fundamental knowledge of LabView I would go for Travis and Kring. Hope this helps.
    Ipshita C.
    National Instruments
    Applications Engineer

  • How does the Labview based program apply to computer which without Labview

    How does the Labview based program apply to computer which without Labview
    student number：1110340001

    SInce you list your "student number", you are probably using the student edition.
    You cannot build standalone executables with the student edition.
    You need LabVIEW professional. If you only have LabVIEW full, you need to purchase the application builder seperately.
    LabVIEW Champion . Do more with less code and in less time .

  • Virtuosity, a LabVIEW based simulation event presented by National Instruments

    Apogee is the annual technical fest of BITS Pilani, a premier engineering college in India. Virtuosity is a LabVIEW based online simulation event organized as a part of Apogee 2012. The problem statements have been uploaded at http://www.bits-apogee.org/2012/Code_&_Simulate/Virtuosity/
    The event is open to all students. The solutions can be uploaded once you register at the site and for the event. The last date for submission of solutions is 12th of March, 11:59 P.M. Further details can be found at the mentioned link. Any doubts can be put forward at http://www.facebook.com/events/356951557669851/ .
    Thank You.

    Sounds like fun!
    Kind Regards,
    Thierry C - Applications Engineering Specialist Northern European Region - National Instruments
    CLD, CTA
    If someone helped you, let them know. Mark as solved and/or give a kudo.

  • Copyright issues for a LabVIEW based application

    Has anyone filed a Copyright for a LabVIEW based application? Copyright office is asking for printed code, which may not work in the case of LabVIEW. Any suggestions?
    Ravi Beniwal

    My general experience with copyright and patent law (copyrights in both music and software) is that, for the copyright process, no individual is going to evaluate your code and "approve" your code/program as with a patent application. The documentation of the code is necessary to build the record that you have created "x" method and someone should not copy your "x" method. I would send a print out of your code in G and perhaps a flow chart.
    If you are looking for protection as to what you program does then you may want to consider patent application, but this is significantly more expensive than the copyright process. Also, under the copyright law, your work is considered copyright protected from the day at which you display copyright info on all of the objects and this is important in proving (later, if needed, if someone copies your work) that you have sought to actively protect your intellectual property. So put (c) 2005 on all the materials that contain your code and or application.
    TommyH

  • StarSim, LabVIEW-based Electrical System Simulation Software, is released!

    We are very pleased to announce that StarSim, a LabVIEW-based Electrical System Simulation Software, is released!
    StarSim is a LabVIEW-based electrical system (power electronics, power system, etc) simulation tool. StarSim consists of two main components, StarSim Editor for creating system models, and StarSim Model Loader Express VI for converting models into the executable code. StarSim can help to verify LabVIEW control algorithms with its accurate state-space system models.
    StarSim online help link:
    http://www.modeling-tech.com/products/starsim/help/index.html
    Note: StarSim is a product of ModelingTech Energy Technology Company. ModelingTech is located in Shanghai, China.  Please feel free to contact [email protected] for 30-day free software evaluation.
    Kevin Wang | [email protected]
    ModelingTech Energy Technology Company
    Attachments:
    StarSim DataSheet.pdf ‏404 KB

    Hi Lynn,
    It is possible. What OS you would like us to support, Mac or Linux?
    Thanks,
    Kevin

  • How do i read out the actual voltage range of the daq board as calculated by labview based on my input voltage range

    I am somewhat new to DAQ so I hope I describe this well enough, but I have encountered a requirement for my VI that I am not sure how to obtain from LabVIEW. It is my understanding that when using a DAQ board (I'm using a PCI-6034 E) you can specify the voltage range you expect from your measurements, and then the software calculates the actual voltage range it will be measuring to ensure that you get the best resolution in your range that you can given the voltage step size, etc. of the equipment. I know how to extract the voltage input that I enter into the virtual channel, but I was wondering how I can extract the actual voltage range that the hardwar
    e/software is using based on its own calculations from my input. Can anyone help me with this?

    If I understand correctly, you want to retrieve the actual gain value (and, therefore, usable input range) used by your DAQ card for a particular measurement.
    I think there's a good KnowledgeBase entry with your solution entitled "Programmatically Determining the Gain Used by a DAQ Device". Here's the URL:
    http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/c93d3954ec02393c86256afe00057bb0?OpenDocument
    Regards,
    John Lum
    National Instruments

  • How can I create software start and stop trigger in LabView using 6023E series DAQ card? I don't want to use the external trigger.

    I am using 6023E DAQ card to collect the signals, such as AE, Force, Torque from the machine. I want to collect only some part of signal for example between start triger and stop trigger. I'd like to know how I can creat those triggers in LabView from one of the channels that I am acquiring at the same time. I found one or two library file that is only for start trigger. I know that this is availabe in some of DIAdem functions. Please let me know if you have done some example for this requirement.

    If you are wanting to create a software trigger based on an analog input voltage in LabVIEW, there are several options. One suggestion would be to compare the voltage values from one input channel to a number within a loop. If the input voltage crosses that threshold (is greater than the number), have a case statement that will acquire data from the other channels. This would simulate a software start trigger in LabVIEW.

  • About using the labview in real time DAQ system

    Hi All
        I designed a DAQ board based on PCI bus by myself, using labview for my graphic display application software. DAQ board generate PCI interrupt every 20us(50kHz). then PC respond it and read the data from DAQ board, that means the sampling frquency is 50kHz. the DAQ driver is generated by NI-VISA. it goes well after installing. I am sure that VISA detecte the PCI interrupt and triger a PCI interrupt event every 50kHz.
        But I face a problem, labview can not respond reading data in a real time. so does labview can not be used in the real time system? or is there something wrong with other else? if that is true, how can I solve it?
        by the way, I read the VISA help document. found there are two ways to respond PCI interrupt. one is callback, the other is queuing. I use the second way. I beg your help.

    I think you can use buffered signals with some changes on your circuit, with real time can be hard to implement with not supported hardware.
    Best regards

  • Text file - Labview - Blinking LED (eg daq)

    Hello all, 
    I am totally new to labview. I'm supposed
    to read data from a Text File, then use the file in labview to generate
    an output when certain conditions are met. The output is in the form of
    a daq card (emant) which has LEDs and i'm supposed to make it light up.
    Help me.

    Hi Krum,
    Thanks for the post!
    I would recommend looking at the example finder, Help>>Find Examples. There are examples on reading from text file AND software triggered DAQmx tasks with pre-loaded waveforms (i.e. data from text file). I would try and produce some code, and then post it if/when you get stuck.
    Otherwise, maybe try asking some more specific questions.
    Kind Regards, 
    Kind Regards
    James Hillman
    Applications Engineer 2008 to 2009 National Instruments UK & Ireland
    Loughborough University UK - 2006 to 2011
    Remember Kudos those who help!

  • Labview based application not load using Windows XP in Virtual PC on a MAC?

    An application we want to use, Smart Vibration Sensorversion 2.0.0.46a,
    uses Labview runtime 7.1.  We are attempting to run this
    application in Windows XP using  Virtual PC verison 7.0.1 a Mac
    Powerbook G4 laptop.  The application appears to start to load,
    but then disappears.  No error messages are presented.  The
    application vendor, UpdateInternational, Ph:303-986-6761 teve,
    suggested that I contact NI to see if your product was compatible with
    Virtual PC or if you had any suggestions.  Any ideas?
    Thanks,
    Jeff

    Hi Jeff,
    LabVIEW is supported in Virtual PC however the DAQ driver are not supported. See the following Knowledge base for more information:
    http://digital.ni.com/public.nsf/websearch/55B080D2FCBBD20786256895007C5BED?OpenDocument
    Regards,
    Ankita

Maybe you are looking for

  • 1st gen Apple TV not in devices list in iTunes

    My 1st generation AppleTV is no longer showing in the devices list in iTunes on my Mac Pro.  I have read several pieces of advice and performed the following long list of actions but I am still stuck and unable to sync my Apple TV.  I hope someone ha

  • How do I get contact names to appear in the Verizon Messages browser version?

    Hey Guys, I just got the S5 and was giving the Verizon Messages app a shot since Mighty Text is acting a little wonky with Kit Kat and won't sync outgoing browser texts with the phone. With the VZW Messages app sending and receiving texts from my pho

  • ITunes upgrade installation cancelled - Can't uninstall or complete install

    Hi All I have tried upgrading to iTunes 9.0.3 today and it took forever to install. During the installation process I stopped the install which also took a long time to stop. I CtrlAltDeleted and stopped this task. The problem is, I can no longer acc

  • Material Groupwise authorization for purchase requisation creation

    Gurus My client want to give authorization for creating purchase requisation - material groupwise. i.es for material group 1,2,3,4,5,purchase group 100 has the authority to create the PRs and for material group 6,7 & 9 it should be with purchase grou

  • Vendor specific tolerance

    Hello All, I am trying to set  up Vendor specific tolerance to put a control on Invoice posting I have made following Config setting MM->Logistic invoice verification -> Incoming Invoice ->Configure vendor specific tolerances. Created tolerance group