Is my Time Capsule safe for my new kittens. They love to climb right on top and curl up?

We recently adopted two sweet kittens and they both love to curl up on top of my Time Capsule for a snooze. Is this safe for them?

Technically it emits microwave radiation.  The level is normally "safe" but is governed by the inverse square law.  In other words, you are much safer a small distance away than right next to it and I imagine they don't design it thinking you are going to be putting you head on it for prolonged periods of time. The same topic arises when talking about using a cellphone right next to your head/brain.  They have likely determined it is safe for humans to be in the same room, but probably not tested it for tiny kitten brains right on top of the unit for an hour. 
The other issue is safety for the TC itself.  They are designed to lose heat (which is why the kitten likes it).  If they can't lose heat you end up frying the electronics.
If it were me I would discourage the kitten from sleeping on it.

Similar Messages

  • Restoring an existing Time Capsule backup to a new HD

    The hard drive on my 6 month old MacBook Pro failed inexplicably several days ago. After wasting half a day trying to repair the disk, I caved in and made an appointment at the dreaded "Genius" Bar.
    They verified my suspicions; complete failure. They kept the laptop, ordered a new drive and two days later informed me it was fixed. I sat down and connected it to my Time Capsule with an ethernet cable. When I turned it on, it played through that now insufferable multicultural "welcome"-in-twenty-languages jam and I followed Apple's instructions +Restoring an existing Time Capsule backup to a new Mac+:
    http://support.apple.com/kb/HT1177?viewlocale=en_US
    My favorite step is #12: +Your Mac will check the Time Machine backup for a period of time.+ When that period was clearly going to be a while, I went on a run, came back 40 minutes later and...it had returned me to the initial post-willkommen-bienvenido-etc. screen where I get to choose a language. Okay, my bad for leaving it unattended. I started over at #2, and this time it only took about half an hour. It showed the folders on the Time Capsule, I selected all of them, and clicked Transfer.
    Almost immediately, it dove back into the welcome song! Now, for the third time, I'm at step #12. It's been over half an hour, and still no sign of hope. Just the progress bar checking for backups.
    Would they have installed Snow Leopard on my Leopard machine? I definitely told them what I had been running, but it seems like a plausible reason for the hang-ups.
    Any advice would be much appreciated, thanks!

    Amenity wrote:
    Almost immediately, it dove back into the welcome song! Now, for the third time, I'm at step #12. It's been over half an hour, and still no sign of hope. Just the progress bar checking for backups.
    Connect to your Time Capsule via Ethernet if at all possible.
    After booting from your Leopard Install disc and selecting Utilities, select +Disk Utility+ and see if it can find the +sparse bundle+ containing your backups on your Time Capsule. You may have to join the network, etc., via the Airport icon in the menubar. If you can get the sparse bundle to appear in Disk Utility's sidebar, select it and do a +*Repair Disk+* (not permissions) on it.
    Would they have installed Snow Leopard on my Leopard machine? I definitely told them what I had been running, but it seems like a plausible reason for the hang-ups.
    That's fairly likely; it happens a lot, probably because most folks have upgraded and installing SL has become a habit. But it shouldn't matter -- as long as you're using your Leopard Install disc, it should work fine. Once the restore actually starts, the first thing that happens is your internal HD is erased, and everything is restored from your backups.
    It's also possible that whatever was going wrong on your internal HD corrupted something critical in your installation of OSX, and the corrupted stuff was backed-up, and that's what's giving TM a problem. If nothing else seems to help, try restoring from a previous backup.

  • I want to set up my time capsule on a completely new network & location without losing the old backups. How do I do this?

    I want to set up my time capsule on a completely new network & location without losing the old backups. How do I do this? I cannot find anything in the user manual.

    The TC is very hard to just move.. it retains too much of the old network setup.. buried deep in the bowels of the firmware configuration files.. or even on the hard disk special partitions used by the TC.. invisible to you btw.. !!
    Do a factory reset and setup from scratch.
    That factory reset will have no affect on your backups.. even if you rename the TC.. not a bad things since you also want clients to respond to the new network.. simply reset TM to the new TC name and location.
    See A4 here.
    http://pondini.org/TM/Troubleshooting.html
    Factory reset.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Factory reset Gen 5
    Hold in reset for about 5sec until the status light flashes quickly.
    If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
    Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.

  • Time Capsule will not mount new external HD

    I have just bought a new iOmega 1TB external HD to connect to my Time Capsule. I have perviously been using a Western Digital 250gb external HD. I am having real problems getting the time capsule to mount the new hard drive, i have reformatted it to Apple Extended, but it still will not mount. However when i connect the old drive it mounts ok. Any ideas??

    I am having exactly the same issue with a new Iomega 1TB hard disk.
    The disk works fine when directly connected to a Mac. The Mac can read the TimeCapsule internal disk. The Mac can see the old, smaller WD external disk when it's connect to the TimeCapsule. But it can't see the new external disk via TimeCapsule.
    I have reformatted the disk to MacExt journaled, I have rebooted each device in the chain. Just for kicks, I repartitioned the disk into smaller pieces, and tried reformatting as FAT. No joy.
    Any other ideas?

  • Using Time Capsule only for back-ups, not as a modem

    Hi, We have Comcast modem and router for internet connection. Is it possible to use Time Capsule only for Time Machine-generated back-ups of our Macs?
    Is there any complication setting up TC for use as back-up only device?
    Thanks!

    You can use TC this way. And it's very simple to setup.
    Check out the setup guide here:
    http://manuals.info.apple.com/enUS/Time_Capsule_Early2009Setup.pdf
    EDIT:
    I've just noticed that they've removed the section "Using Your Time Capsule on an Existing Wireless Network" from the new manual.
    Anyway here is a copy of the text under that section in the old guide:
    To set it up:
    1 Open AirPort Utility (located in /Applications/Utilities/ on a computer using Mac OS X,
    and in Start > All Programs > AirPort on a computer using Windows), select your Time
    Capsule, and then click Continue.
    2 Follow the onscreen instructions to join your current wireless network.
    3 After your Time Capsule is set up, you can use Mac OS X Leopard to set up Time
    Machine to back up the Mac OS X Leopard computers on your network. See “Using
    Time Machine with Your Time Capsule” on page 27 for more information.
    If you’re using an earlier version of Mac OS X, or if you’re using Windows, you can
    connect to Time Capsule to share or back up files.
    Message was edited by: dchao99

  • Time Capsule to restore to new Macbook Pro

    Okay...I'm pretty sure this will work...but just wanted to make sure before I pull the trigger.
    I currently backup my Macbook to Timecapsule. I'm getting a new Macbook Pro soon and wanted to make sure that I can restore my current setup to the new laptop from my Time Capsule backups.
    Thanks in advance for your sage advice.

    I currently backup my Macbook to Timecapsule. I'm getting a new Macbook Pro soon and wanted to make sure that I can restore my current setup to the new laptop from my Time Capsule backups.
    Yes. Check out the following Apple support article: Restoring files from a Time Capsule backup, specifically the section, titled "Restoring an existing Time Capsule backup to a new Mac."

  • How to connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

    How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

    You can direct connect your MBA to the LaCie via USB 2 cable.  If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it.  Time Machine can access it either way.

  • Can anyone recommend an external storage device to supplement my mac book air?  I already have a time capsule but want the new device to replicate the data on that so ideally would like a device that i can connect to the time capsule through a cable.

    Can anyone recommend an external storage device to supplement my mac book air?  I already have a time capsule but want the new device to replicate the data on that so ideally would like a device that i can connect to the time capsule through a cable. 

    Hi CJR
    I'm not sure how Time Capsule can be replicated onto your external drive but there is a USB port on the back of TC that can be hooked up to any recent external drive.
    Another thing to think about , besides a Time Capsule failure, is the theft of your Time Capsule, so it might be a good idea to consider separating any redundant back-up from your Time Capsule or both my be stolen.
    TC will back up until full and then begin deleting the oldest back-ups.  Mine is a 2TB Time capsule.
    My back-up plan is as follows:
    1.  Macbook Air back-up on Time Capsule though Time Machine backs up everything - I think it's about every 30 min or so.
    2.  Contacts, reminders, appointments, notes, email are backed up through iCloud.
    3.  iTunes and non-itunes purchased music is on iMatch (and no need to back-up) and any non-iTunes music is backed up on an HP external drive (in case Time Capsule dies)
    4.  Photos are on my MacBook Air and are backed up on my HP external drive.
    5.  Office documents (Excel, Powerpoint, Access etc) are stored in a Skydrive app (like iCloud) and Skydrive syncs these docuemnts with the MS  cloud and my old PC and does not alter their native format like storing in iCloud would do.
    Cheers

  • How do I transfer all my data from my Time Capsule 2TB to my new Time Capsule 3TB?

    How do I transfer all my data from my Time Capsule 2TB to my new Time Capsule 3TB?

    Click here and follow the instructions to move a Time Machine backup, and just drag-copy everything else.
    (113074)

  • How do I access the data saved on my time capsule?  for example, if i try to view my photos it tells me that i have 2.4gb of photos and gives me the option to "view with iPhoto"....but when i click on "view with iPhoto" nothing happens...  thanks!

    how do i access the data stored on my time capsule?  for example, if i try to view a photo, i get the option to "view with iphoto" but when i click on "view with iphoto" nothing happens.  i'm having similar trouble openning up movies, music, etc.  it appears as though the files exist / saved on the time capsule (because i can see how much storage they consume), but i can't open them.  thanks!

    Unfortunately, Apple removed the feature to "browse backups" in Time Machine backups of iPhoto a few years ago.
    You have to restore the entire iPhoto library to a separate location to be able to "see" it, and then choose the specific images that you want use.
    For complete details, see #15 in Pondini's excellent support document Time Machine -- FAQ.  Check the information in the pink box there.
    Frequently Asked Questions

  • Do you have to disable your Wifi on your existing Reuter if using time capsule to Create a new network

    Does one need to disable the wifi on ones reuter if using a time capsule to create a new network what happens if you don't and what are the benefits of doing so

    No but you may experience a bag of hurt from cross channel interference. You may have to reset the Subset Mask of one of the routers along with separating the broadcast channels.
    Further if you then have one device a PC perhaps on one network and your Mac on another you may not be able to share files/ITunes etc.... with any ease.
    So switching off the Wifi on the router/modem and hanging an Ethernet cable to the Time Capsule and setting that up as your WiFi router distributing the IP addresses over DHCP really is the least problematical approach.
    IF you have cable Internet with a decoder with Ethernet output ditch your old router completely !

  • How can I move (copy) my Time Capsule date to a new 2T hard drive and then wipe the TC and start as a new (clean) Time MACHINE backup?

    How can I move (copy) my Time Capsule date to a new 2T hard drive and then wipe the TC and start as a new (clean) Time MACHINE backup?

    Just use the archive utility on the disk page of the airport utility manual setup..
    If you have lion and v6 airport utility.. it missed out. On lots of things.
    Download and install the real.. UTILITY
    5.6 http://support.apple.com/kb/DL1482

  • I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light.

    I have an Airport Extreme Base Station and have recently upgraded to Mountain Lion. Now airport utility won't work with my base station so I bought a Time Capsule. For the life of me I can't make the substitution work and only see a blinking amber light. Can anyone who has made this change offer some advice?

    apikoros wrote:
    The Utility transferred all of the AE's settings, so I still have to change the password, which leaves me with only 2 other questions, I think:
    1)  I assume it's just a matter of using the Utility, entering a stronger password and checking for it to be remembered in Keychain Access.  But do I have to  change the password for each individual unit-- the TC, the Extreme and both Expresses-- or will changing it just for the TC alone work for the entire network?
    Resetting the password you will need to do for each device... the utility cannot even see those old units.
    So you will have to do it for each one.. think it through.. because as you change passwords the others will lose connection.. so start from the express which are wireless extending .. change those first.. and go back up the chain.. as each one changes it will drop off the network.. until you reach extreme and change that. Then you might need to reboot the whole network to get everything talking again. If something goes wrong.. just pluck that one out of the mix and plug in ethernet.. reset and redo the setup. That is my preferred method anyway.. do everything in isolation one by one. By ethernet and then nothing goes wrong.
    2)  Who's the treasonous SOB who spilled the beans to you about the ICBM in my back yard?!?
    N.Korean hackers.
    [Edit] Whoops-- one more question:  I want to partition the TC's disk, but Disk Utility doesn't see it.  What do I need to do?
    You cannot partition a network disk. And apple provided no tools for it in the TC itself. You can pull the disk out and partition it but that voids your warranty. (although done with care who is to know).
    Look at Q3 here.
    http://pondini.org/TM/Time_Capsule.html
    Mixing TM and data on the TC is worth planning carefully. They don't necessarily sit happily together.

  • I have two time capsules, one for work and one for home, how do I set up the work time capsule to only back up my work files?

    I have two time capsules, one for work and one for home, how do I set up the work time capsule to only back up my work files?  Also, how do I add co-workers to my work time capsule and wife to my home time capsule?  Thank you!

    You cannot have two different TC setups.. at least until Mountain Lion.. it did introduce some changes but I am not sure if you can setup two different configurations for TM.. you can use two different devices to back up to. I doubt this will help you.
    You might be better using a real backup software.. superduper, CCC, chronosync etc.
    The TC by default is available to any Mac in the network to do backups. TM will sort itself out and put each computer on a different backup. These are kept in separate sparsebundles.. so that is all fine.

  • I have "migrated" my Time Capsule files to my new iMac and most of the files to me "I don't have permission to view files" I am they admin....will I thought I was. What gives?

    I have "migrated" my Time Capsule files to my new iMac and most of the files to me "I don't have permission to view files" I am they admin....will I thought I was. What gives?

    You should be able to change the permissions on the files.. this is yet another bungle by Mavericks I suspect.
    http://support.apple.com/kb/PH13799
    Sometimes it is because you Migrated wrongly.
    http://pondini.org/TM/E10.html
    It is not up to Mavericks because sadly the guy who wrote all this great info died recently.

Maybe you are looking for

  • Poor Quality After Render

    Hello. I have been having some problems with Premiere Pro CC after the 7.2 update. A new one has arisen when i render a video. Normally the quality would improve and i can see it in the preview window. But now after i render a video the quality is so

  • Can't open Gmail in Firefox but Internet Explorer can!

    Though my browser deletes everything before it exits out I didn't take any chance and ran CCleaner and in-spite of this I can't open Gmail. Mozilla says Untrusted Connection! Gmail opens fine on Internet Explorer. There are some other websites as wel

  • Envelope printing on P1102w

    Trying to figure out how to print an envelope using MS Word on a P1102w.  I keep getting the blinking attention light and the print job never makes it to the printer and instead cancels.  The manual doesn't even mention envelope printing. This questi

  • Daily backup for a certain folder on my desktop using Ipod - Possible?

    I would like to use my iPod as a memory media to perform a daily backup (at a certain given time, every day) for a folder in my computer. How do I do that? Do I need to have some sort of a software that will be directed to the iPod as its media? Is s

  • New SAP-BI Architecture on top of SEM-BCS/BPS

    Hello - my company currently has SEM-BCS/BPS up and running within SAP-BI for about 4 years now.  We are now going to build additional architecture in SAP-BI.  For instance, we are developing a FI-GL Cube, a SD Cube, and a PS Cube (i.e. along with th