Is old 845E Max the same as 845E Max (HT ready)?

Hi:)
I've got MSI 6566 845E Max mainboard. But the only mainboard i found on http://www.msi.com.tw is 845E Max (HT ready). Can i use driver, firmware etc updates if they r for 845E Max (HT ready) to my mainboard? And finally, can i mount a Intel HT processor?
Thx for answer in advance.

I am NOT trying to be a WISE-GUY fellas! But I will BET you guy's the house that if he DOWNLOADS the BIOS (5.7) that his MO-BO WILL INDEED BE ABLE TO RUN IN H-T MODE, (as long as he gets a H-T PROC.)!. I say this because this has been done with other MO-BO companies! ie VIA, ASUS, AOPEN. I CAN VERIFY THIS STATEMENT FOR THE FACT THAT MY OTHER PC, A VIA P4BP-400-FL REV 2.0. WAS BUILT BEFORE (HT) CAME OUT, And on the VIA FORUM THESE SAME QUESTIONS WHERE ASKED! BECAUSE THE SAME BOARD WHITH REV.3.0 WAS (H-T) READY. BUT THE NEW BIOS REV. WAS FOR BOTH BOARDS!! I FLASHED BIOS (Thinking my BOARD would be a mess) BUT NO!! MY BOARD WAS NOW (H-T) READY!. SO I MUST SAY THAT I HAVE MORE FAITH IN MSI THEN I DO IN VIA, HENCE THE REASON I SAY THAT (IF THE NEW BIOS IS FOR BOTH BOARDS "REV 1.0 AND LATER) THEN Gotrec WILL INDEED HAVE A (H-T) BOARD AFTER HE FLASHES AND GETS A NEW PROC.!! PS. IF IT DOES NOT WORK FOR HIM I WILL BE IN HIDING ...Sean REILLY875

Similar Messages

I have an old iPhone (3s) that I've now replaced with a newer one. I would like to use the old iPhone in the same way I do an touch. When I plug it into my Mac laptop, there is no recognition on my computer of this old iPhone. What can I do?

I have an old iphone that I've replaced with a newer one :-) and I'd like to use the old one in the same way I do an itouch. When I plug it into my Mac laptop, there is no recognition of it as a device. Help! What do I do????

http://support.apple.com/kb/ht3406

TS2446 A email account that was used is now not in use and songs that were purchased and added are bound to this old account from the same computer how do I the purchaser of these songs reclaim the authorization to play and use in my new account

A email account that was used is now not in use and songs that were purchased and added are bound to this old account from the same computer how do I the purchaser of these songs reclaim the authorization to play and use in my new account. even though account name may have been changed.

Just authorize the computer and retreive them.
Go here -> https://iforgot.apple.com/cgi-bin/WebObjects/DSiForgot.woa/wa/iforgot .
FYI: you should have simply updated the AppleID with new info and continued to use it instead of creating a new one.

Can not access a website but everyone else is doing well and the old computer with the same internet coming in on that side.

Can not access a website but everyone else is doing well and the old computer with the same internet coming in on that side. side is www.miun.se

You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make a note of those passwords and bookmarks.
You can't recover from this 'forget' unless you have a backup of the involved files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

When I sync my photos to iPhoto from my iPhone 4S it like saves about 200 on my phone. I really don't like that because they're like really old and stay the same... Can you take that setting off? Or just make it you most recent pictures instead?

When I sync my photos to iPhoto from my iPhone 4S it like saves about 200 on my phone. I really don't like that because they're like really old and stay the same... Can you take that setting off? Or just make it you most recent pictures instead? It's really annoying because they're like year old pics

it had to do with Maverick/Aperture not supporting the same date formats as before in Smart Albums when I upgraded.
Smart albums based on dates have always been problematic, if you use smart settings that require a date string to be entered. How the date string will be interpreted, will depend on your settings in the System Preferences > Language&Text > Advanced > Dates formats and the "Region".
It is much safer to use "Calendar" rules in Aperture instead of "Date" rules with date-strings. Calendar rules will remain valid, if the region settings are changed in the System preferences.

Is it possible to install the old harddisc into the same product (V3 771) under a new windowsversion

Is it possible to install the old harddisc into the same product (V3 771) under a new windowsversion.. I have heavy problems with my Acer V3 771, black screen since 2 years, usbports not working well, now the keyboard-I would like to buy the same product (used) and install the old harddisc....

i think you can do it.

How to modify a template and use both old/new in the same library without interference

OK first Thank you for reading this and hopefully being able to help me out. I got dumped this project on my desk to update two different templates already published in
share point(2010) years ago. The original developer left the company 4 years ago. Since then anyone that tried to do anything with them made a big mess. I have done some heavy reading and am stuck on few issues.
Please note the templates were created IP 2007 and I will be using IP 2007 to modify them. The temples have a small amount of C# that does not have to be changed. There is also a digital signature linked to them.
After some heavy reading this week. I figured that I need to edit the template from Share point(2010)/IP(2007) and not copy the templates to a different location laptop/desktop
because that will ruin the digital signature. There is also a large volume of submitted forms from these temples. The new version of the temples will be heavily modified deleting rolls columns changing names. My understanding is that since I want to keep the
old submitted forms the way they are and still use the old template to open them. I would need a second version of the original template with all the visual modification to still use the original template's C# digital signatures and any other file that runs
in the background.
The plan:
1)Turn off the automatic update to forms/template when a new version of the template is created.
2) Copy the existing template (.xsn) file to a new document folder in share point(same network).
3) Change the name of the .XSN file that I copied and modify it??????????? Will keeping the same name interfere with the old template/C# digital signature ect? I would like to change to something like SameName_version_2015 for example. or will changing the
name cut the link to the old C# digital signature? or will it get modify the background files and break the old template/submitted files.
4) Publish the new template in share point.
5) Change the data connection to a new directory that I wish to submit all files.
Please advice am I missing anything? and help me understand my step 3 better. Also I would love to get a better understanding of how i can backup and recover everything. Do I simple copy unmodified .XSN files somewhere and publish them if things goes wrong?
Do I need to backup anything else?
I am open to options if I can create a test folder in the share point for safety.
Once again THANK YOU for trying to help.

Hi, thanks for the reply!
Just to follow up for what we did to disable the delete function for maintaining table records. We hided the Delete button by adding a "MODULE disable_delete" code in Screen Painter. So now only adding records to the table is allowed.
Thanks,
Jenny

HT201317 I want but don't have iCloud icon in control panel (internet). I have a MobileMe icon which I can't log into and I'm not sure if it is an old version of the same thing? Clicking on it directs me to a closed website which redirects me to iCloud.

I'm trying to set up photo stream on my PC so that photos automatically download and are saved on my harddrive but I cannot find an iCloud icon in the relevent section of the control panel. I do have a MobileMe icon but cannot log into it with my Apple logins and am not sure if it is the same thing anyway. Any advice how to get photo streaming set up?

sandy_ozbugs wrote:
Thanks. Unfortunately my system does not appear to be up to date enough. I am runnung on Windows XP not Vista (Vista was out when I got my computer but new so was recommended the old proven system). Is there any way of getting around this or no vista no iCloud?
Cheers, S
Install Vista or Windows 7. You will also need Office 2007 or 2010

How to add new data entry and display old data in the same screen in SM30?

Hi, Experts:
We need to use SM30 to maintain a table entry. When I click the button of "New Entries", the table screen becomes blank. I can only add new data but not be able to see the old data existing in the table.
How can I have the new line available for me to add new data at the same time see the data currently existing in the table?
Thanks,
Jenny

Hi, thanks for the reply!
Just to follow up for what we did to disable the delete function for maintaining table records. We hided the Delete button by adding a "MODULE disable_delete" code in Screen Painter. So now only adding records to the table is allowed.
Thanks,
Jenny

"New" and "old" appraisals at the same time (OSA and Perf module)

Hi All,
We currently use the old Performance Appraisals system (APPCREATE, BA object), but we are planing to switch to the new one - Objective Setting and Appraisals module (HAP00 REPLA switch).
My questions are.
- After switching the appraisal system, old appraisals will be available at the same time, too?
- Are there any transaction to view the old appraisals (APPDISPLAY, or else?)
- On IT0025 we will see only the new appraisals, or all of them?
Do anyone have experiences on this issue?
Thanks in advance!
Márta

hi Marta,
i have started directly with osa in 2006 so i barely touched the old mbo appraisals in it25 (besides a migration project). Anyway I wouldn't be surprised if the transactions were well separated, which means that you could easily copy and make your own transaction for the old appraisals, for the technical users. For the business users i would suggest to write an implementation for the hrhap00link badi, where you print out in a smartform the last one or two "old" appraisals of the appraisee.
regards, ioan.

Hi I had my new Ipod classic stolen a few days ago and decided to reconnect my old ipod to the same computer but it wont open sync any ideas welcomed

Help !
I bought a new ipod and it was stolen so I tried to reconnect my old ipod classic 30 gb back to the computer but it wont sync just the red flashing no entry sign Ive tried all the suggestions under help but no go
Thanks

Hi Becki ..
You need to "authorize" the Mac.
Launch iTunes on the Mac then from the iTunes menu bar top of your screen click Store > Authorize This Computer.
Now, using the same Apple ID as you used to purchased iTunes media originally, you should be able to sync all your content.
More details here > iOS: Syncing with iTunes

Can't play music and be on old network at the same time?

I just want to use this device to play music and connect to my original wireless network. I assume since I'm not using an Airport Extreme to connect to the internet then I can't get the Airport Express to connect either. I can't listen to music and be online at the same time the way it is currently configured. Is there another way to set this up so I can connect to my airport on itunes and play music while being on my other wireless network?

Try Doing a hard Reset your Express and go through the setup procedure again.
This time making sure your joining your existing network.
Powerbook G4, MacBook Pro, Mac G5, Mac G4, Mac Mini Mac OS X (10.4.8)

Because I have taken over 9,999 pics, my phone is now duplicating image numbers. The problem is when I am importing with Image Capture, when I select images, the program is importing BOTH the old images of the same number as well as the new ones. Help?

Because I have taken over 9,999 images, my phone is now duplicating image numbers. The problem is that Image Capture now imports BOTH images when I select the new ones that share numbers with old ones. The images were completely mixed when they showed up in Image Capture - Old image 0001, new image 0001, old image 0002, new image 0002 and so forth. I clicked on "date," which then rearraged the images, and I selected only the new ones, but when they actually import to my computer BOTH old and new images are importing. Has anyone figured out how to solve this problem?

Well, obviously all I needed to do to solve the problem was to post about it. It has stopped, so all is well!

TS3274 can I keep my old Ipad with the same name?

I bought a new Ipad 3rd Gen and are using my same AT&T account for 3G. My wife wants to continue using my old one, I restored via I cloud to set up my new one like the old one. Are we sharing the AT&T account now?

You probably can swap the SIM around but you cannot have one account with two sims. Where you hoping to use the cellular connection simultaneously? If so that cannot happen.
For that you need two data plans.

How to retrieve old purchases with the same Apple ID but from a different country

I used to be on the US app store and purchased apps, music and books on it. Now I have changed it to a South African account but can't update apps or download my old apps onto new devices. Any advice would be appreciated.
Thanks

Hello JasonHatts,
Thanks for the question. After reviewing your post, it sounds like you dont see the other country purchases. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Change the country of your iTunes Store, App Store, iBooks Store, and Mac App Store account - Apple Support
After you change the country of your account, you won't see the items you purchased from the previous country’s store in the Purchased section.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

HT5569 I have a new apple id, i'm trying to verify it, but the e-mail I used to set up the old ID is the same that I want to use with the new ID and I get an error message. How can I remove the old ID. i just need one.

I had an Apple ID, but forgot my password. I created a new Apple ID. I belive I used my hotmail account for my apple ID, but I need to remove it, because the information I used do not let me set up my new Apple ID
<E-mails Edited by Host>

Why don't you just go to https://iforgot.apple.com and reset the password on the original ID?

Is old 845E Max the same as 845E Max (HT ready)?

Similar Messages

Maybe you are looking for