Is powershell installed by default

is powershell installed by default with a fresh intall of all the latest releases of windows server?

Hi,
Yes PS will be installed by default.
Version 3 is installed by default on Windows 8 and Server 2012 (all versions). You can download V3 for Server 2008, Server 2008 R2 and Windows 7.
Version 2 is installed by default in Windows 7 and Server 2008R2. PowerShell V2 is not installed on Server Core versions of Server 2008 R2, but you can add this feature by using sconfig.exe on Server Core installations.
http://technet.microsoft.com/en-us/library/bb978526.aspx
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Similar Messages

  • MS Office 365 fails to install in default on Win 8.1 new laptop S75-A7221

    Hello,
    New license MS Office 365 fails to install in default on Win 8.1 new laptop S75-A7221.
    I downloaded software from Microsoft MS Office 365 site.
    What is the contact for helpdesk in India for quick resolution?
    Thanks,
    Miroslaw

    Run Microsoft FixIt in the following link to check the result.
    http://support.microsoft.com/kb/2822317
    If your Office installation problem continues to occur, try to perform the steps provided by the same link for general troubleshooting.
    Tony Chen
    TechNet Community Support

  • Is XServer Installed by default?

    Hi All,
    I just got a new box SUN Fire 280 come with no video card. I installed Sun OS 5.8 thru a serial cable. Everything went fine except that I need XServer to make Oracle Report Server run. Is XServer get installed by default on a machine without video card? If not, how do i verify that? Otherwise, is there any alternative if I really need XServer on that machine and how do I go about doing it?
    Thanks a lot for help.
    SIM

    Hi
    When you installed Solaris, what package cluster did you choose to install?
    Entire distribution with OEM support ( which is everything )
    or Core ( just the basic stuff to get a server up ) or something inbetween.
    The package cluster you chose will determine whether the Xserver software was installed.
    If it's not an issure to have a lot extra software on the machine, probably the quickest thing to do
    is rebuild the system will all the software.
    Alternately, you could add the packages in yourself manually using the pkgadd command. I'm not
    sure which package the Xserver stuff is on, probably a number of packages beginning SUNWxw

  • SCCM 2012 sms_dp_smspkg$ installed under Default FTP site

    I'm trying to setup a remote Distro Point on a Windows Server 2008 R2 with a FTP site already running.   I installed a Default Web site but when I set the server to be a DP it installed the SMS_DP_SMSPKG$ & SMS_DP_SMSSIG$ under the default
    ftp site.  Is this a problem ?  If so how can I move them to the Default Web Site ?
    Thanks

    Since no one has answer this post, I recommend opening  a support case with CSS as they can work with you to solve this problem.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Where are all java updates installed by default.

    Hello guys,
    Do you know where all the java updates are installed by default? Thanks for your replies!!

    In the place where you find it when you install Java and you don't change the installation path! A wickedly easy test to perform and be 100% sure of yourself.
    But it depends on the version of Java, and the operating system you use, and the version of that operating system, and possibly even your native language as the operating system (notably Windows) may have translated folder names. It may also depend on policy settings. Lots of variables.

  • Makepkg with custom dwm ends up installing the default package!

    I have a directory where I edit the source of dwm and then run 'makepkg -efi' to build and install my own version.
    I have been doing this for quite a while now, and everything worked fine.
    Then a few days ago I installed the default dwm with pacman to show my freind what it looks like without the patches that I've applied.
    I removed it with pacman afterward, but now when I run the pkgbuild in my customized dwm directory, it ends up installign the default package!
    I had to go into the source and do a striaght 'make install' to get my custom binary installed again.
    Does anyone know what's going on?

    Are you sure that you did not miss the  "-e" there once and have re-extracted the original tarball?

  • Microsoft SQL Server Express LocalDB / Windows Azure Powershell install fail - SQL writer failed to start

    I'm trying to install Windows Azure PowerShell on my Windows 7 SP1 Enterprise laptop. As a prerequisite, it needs to install Microsoft SQL Server 2012 Express LocalDB, I but keep receiving an error:
    Service 'SQL Server VSS Writer' (SQLWriter) failed to start. Verify that you have
    sufficient privileges to start system services.
    The service that it tries to use by default is the Local Service. I verified that it has log on as a service privileges and even did a restart. Same error.
    any ideas?
    Cross posted in Windows
    Azure

    Hi ,
    According to your description, when you install SQL Server 2012 Local DB , it encounter the error about SQLWriter. We need to verify if you invoke SQLLOcalDB.msi directly, and check
    MSSQL service is running and other service’s status.In addition, you can go to event viewer and check the error logs for analysis.
    There is a similar issue about Service SQL Server VSS Writer and troubleshooting SQL Server 2012 Express LocalDB, you can review the following article.
    http://blog.andreloker.de/post/2008/07/17/SQL-Server-hotfix-KB948109-fails-with-error-1920.aspx#!
    http://social.technet.microsoft.com/wiki/contents/articles/4609.troubleshoot-sql-server-2012-express-localdb.aspx
    Thanks,
    Sofiya Li
    Your Name
    TechNet Community Support

  • Finding templates not installed in default location, then making them work

    I recently installed Leopard, upgraded it to 10.5.5, then installed a brand new upgrade to Final Cut Studio 2 (and therefore FCP6). I put all the media, templates, etc on an external drive, as the installer prompts you to do if you wish. Fired up FCP for the first time: no sign of the Master Templates (aka Motion Templates). And no instructions among the 2,033 pages of the FCP user manual of how to tell the app where to look for them.
    Next I put an alias of the relevant folder into the default /Library/Application Support/FInal Cut Studio/ folder, and tried again. This time FCP saw the templates, but like so many other correspondents on this discussion board, when viewed in the Viewer, or placed on the Timeline: nothing. Black.
    Then I ran Software Update and downloaded, I think, about eight updates to one Final Cut Studio component or another. Opened FCP: bingo! Templates all singing and dancing.
    Finally I removed the alias from the Library folder -- and sure enough, FCP is now seeing the templates on the external drive without any help.
    So it looks like completely updating OS and FCS does work -- at least in my case. I'd love to know if I'd done the app updating right from the start whether FCP would have found the templates on the external drive, or whether I kind of kick-started it by using the alias trick.

    If it ain't broken, don't fix it.
    One procedure that resolves the black templates is a complete software update to a clean install of OS and FCS2.
    If it is working, that's great. I don't advise using the alias approach because you only have one FW bus on the MacBook Pro, and you don't want it accessing media files and templates, etc. simultaneously.

  • Where does Adobe CS3 install by default?

    Hey there,
    I'm trying to install Adobe CS3 Design Premium on my MacBook Pro.
    I was wondering once installed in the default installation location "/Applications" does it install each individual application in the Applications folder, or does it create another folder automatically that installs every application in there?
    I'm asking, because if it automatically installs everything in the applications folder, i could create a new folder "Adobe CS3 Design Premium" and have everything install in there.
    Thanks,
    Saeid

    In any case, if it does, I explained that the installer would allow the creation of that folder. Also, my "yes" was in reference to the OP's suggestion of directories for standard install, and making a new folder. Redundancy is not necessary here. Nothing was made clearer. read my statement below. It applies to almost every post in here. A tenet not followed by many.

  • Installing Leopard (Default Installation)

    Hi -
    I just purchased the family pack version of Leopard to install on my PowerBook G4 1.67 2GB RAM and my wife's Intel MacBook Pro. I have read a number of posts and the installation treads. Many recommend completing a Archive and Install. Are there really any major issues just completing a default upgrade? Both systems are utilizing 10.4.11 and have been running great (no issues at all). I would like to retain my applications and setting, etc. without a lot of fuss.
    Just want to make sure I am picking the best installation option.
    I appreciate any feedback.
    Thanks,
    Pete

    Thanks for the advise!
    I guess I am confused about the Archive and Install option. I thought you could only retain files, network setting and user accounts. I was not aware that it will retain applications as well. So, just to be clear, Archive and Install will keep my current iLife, iWorks applications as they are on my machine right now? I don't have to pull them from the archive folder?
    Sorry for the basic questions...
    Thanks again,
    Pete

  • Workflow Server is installed with default installation of 10gr2 EE?

    Hi Guys,
    i listen many people that workflow engine is embedded from onward 8i and as we install 10g it's also install but i didn't find it in 10g Enterprise Edition.finally i install it from oracle 10g companion CD and configure it.any one can told me what it's my mistake that i cant find it or its not present in default installation and when we need we install it from companion CD.
    Regards,
    Shakeel Haider Khan

    ppls seem to forget that using open source platforms has some shortcomings as well,dont get me wrong its just that i would like to remind all users including myself wot time is it...meaning ...
    "Ninety days ago, Red Hat invested in the future of open source in the enterprise by
    acquiring JBoss," said Tim Yeaton, Senior Vice President of Enterprise Solutions, Red
    Hat. "Today, we reach one of our first milestones as customers, developers and partners
    can now tangibly benefit from the new JBoss channel offerings and the integrated, tested
    Red Hat Application Stack." source (http://jboss.com/)for further enquiries we might soon find ourselves on endless subscribsion bases.lets have fun

  • Apple Works Install Issue;"Default location required for install not found"

    I am a new mac user. Just bought a Mac Air. Trying to install Apple Works 6.2.9. I downloaded, but when I try to install, I get a message "The default location required for this install could not be found. This install will be cancelled." Any ideas? Thanks!

    The download isn't the complete application, it's an updater intended to be applied to an installed earlier version. AppleWorks is no longer sold by Apple but may be available on eBay or other retails. It has been 'end-of-lifed' and there is no support for it, however it works well on current Macs.
    However given the situation you are probably better off getting something modern, such as iWork.

  • Bundled software installed by default - Major Dislike!

    Please stop the practice of defaulting the check-box for bundled software to enabled.  This is a truly annoying practice.  I'm sure that they pay you something for the option, but is it worth pissing off your users over?

    The auto checked default is annoying, but be glad if it is at least there. 
    Last time Flash told me I had to update, it did not give me an option , it just auto downloaded Chrome and Google Toolbar too.  Trust me, it is even worse when there is no check box and it just starts installing Chrome and Toolbar which corrupt some of the tools I use for work on my laptop.

  • HP DV7-3079wm - Does this laptop come with Bluetooth Module installed by default?

    Hello all,
    I just purchased this laptop and it is enroute to me now via FedEx. I am wondering if the laptop has the BlueTooth module preinstalled by default or do I need to purchase one and install it after I receive it?
    Thanks in advance,
    ~D~

    Hello Raven283.  I understand that after trying to flash your BIOS from within Windows 8 you're no longer able to boot the notebook.  Is this correct?
    Here is more information about HP and the upgrade to Windows 8. 
    It sounds like your thinking is correct.  It seems that the installer/flashing program did not properly execute within Windows 8.   Now that the flash failed the BIOS does not appear to want to load properly.  HP notebooks flash the BIOS via a Windows executable file and do not support flashing via a USB drive.  So, you will need to contact HP Technical Support in order to get the notebok back to working condition. 
    You can check the status of your warranty by going here.  Contact HP at 1-800-474-6836 if you're in the US/Canada.  If you're in another area you'll need to go to HP's Support Site to get your area's contact information.
    I hope this was helpful!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • ITunes Install - Drive default

    Hello -
    I am trying to install itunes on my XP computer. I have my "E" Drive to be the default where I would to install it. However, when I attempt to install it, first, I tell it where I would like to put it. Being the E drive, into an itunes folder. On the very next screen however, it tells me my "C" drive -- the highlighted volume does not have enough space to install it. It also will not let me manually select any other drive besides the C default.
    How can I get it to "want" to install itself onto my drive with more space?
    Below is the message it gives me.
    Thank you for your time..
    "Out of disk space
    Disk space required for the installation exceeds available disk space
    The highlighted volumes do not have enough disk space available for the currently selected features. You can remove files from the highlighted volumes, choose to install fewer features onto local drives, or select different destination drives."

    Mary, use these directions
    http://support.apple.com/kb/HT1364
    Make sure you read the note and always have the exHD operational BEFORE starting iTunes
    +Note: If you move your library to an external drive, you'll need to power up and connect the drive before starting iTunes. If you don't, iTunes will prompt you to either locate the library or to create a new library (which will result in an empty library). No matter what, it's always a good idea to have a backup of the media you have in iTunes.+
    Also it is a very good idea to assign a drive letter way down in the alphabet, like M or Q: before doing this. WIndows has a nasty habit of changing drive letters on you, if you don't. A changing drive letter will also result in a blank library.
    http://support.microsoft.com/kb/307844
    Message was edited by: Katrina S.

Maybe you are looking for