Is ST-PI and ST-A/PI needs to be installed in DEV and Quality Systems.

Environment:
ERP and BI 6.0 / Windows / SQLServer 2005
Hi All,
Is ST-PI and ST-A/PI needs to be applied to DEV and Quality Systems of ERP and BW.
I understand that ST-PI and ST-A/PI are necessary for Production Environment.
Is it recommended to install or upgrade the same in Dev and Quality Systems of ERP and BW.
Because I believe it is always good practice to keep all systems Support Packages including ST-PI and ST-A/PI the same in the same Landscape. (But could not find any documents from SAP.)
Thanks and Best Regards,
Raghunahth L.

Hi Raghu,
you can get into the problems which I have said if you dont implement that,also many support packs do have their dependencies on ST-PI and ST-A/PI and seriously I havent heard people implementing this on prod and not dev and qa....I have worked on with many big clients but never heard this
Also if you ignore whatever I have said,still it is still recommended that you never apply anything directly on Production,It is always better if you first implement on dev and qa and see if you are facing any issues while implementing...so its always better to implement on dev and then qa
and It doesnt take too much of time,so that should not be an issue after all
Always follow SAP best Practices
Rohit

Similar Messages

  • Organization unit ID is different in Dev and Quality Systems

    Hi Experts,
    We have downloaded the Organizational Structure from ECC in the Dev System, Sales organizations, Sales offices and sales groups were created with number range Assigned to Current Active Plan version. but the number for the Sales orgs started with 50000026 instead of starting with 50000001. And in the Quality again  we have downloaded the Org. structure from ECC, now the IDs were created starting from 50000007. this causing the inconsistencies in the Qualtiy System like, Pricing procedures are not getting determined.
    why the Ids were created from 50000026 instead of 50000001.
    What are best practices to have the same ID for Organizational Units in both the Systems?
    Thanks and Regards,
    S Reddy

    Hi Kiran,
    thanks for responses,
    Now we are planning to delete the Org. Structure in Quality and planning transport if from Development. What is best approach to save the Org. model in Transport request and move to Quality. I came to know about the report RHMOVE30, will it be used for transporting from Dev to Quality?
    One more thing, if we transfer the Org data to Quality will it take the same no. in Quality. I have doubt, If Dev Org Id were created from 50000026 and Quality it will start from 50000000.
    Kindly help me,
    thanks and Regards,
    S Reddy

  • How to add EP(DEV and QAS and PRD systems in solution manager)

    Dear Gurus,
    I want to include EP dev and qality and prodution systems in solution manager .
    While installation of EP(only ASJAVA it is not having ASABAP) i selected solution manager as a Central SLD. But i deleted the systems in solution manger and recreated it again. I created all the systems and datatabae and logical components but in maintenane optimizer it is showing only production system but it is not showing development and quality systems in maintenance optimizer.
    How to see developmnet and quality systems in maintenace optimizer.
    Same thing for ECC also.
    ECC dev and quality systems installed in the same server.
    In maintenace optimizer it is showing only dev sysetm it not showing quality sysetm.
    Can any body help this probelm.
    Thanks & Regards
    Rao.

    I think you need to adjust your filter settings in the initial screen of MOPZ.
    It's in the right top corner.

  • Does two seperate client required if the solman monitors DEV and QAS system

    Hi All,
    This is our client landscape:
    1 Dev-SolMan->For all development and quality systems(ECC 6.0, BI and EP).
    1 PRD-SolMan->For all production systems(ECC 6.0, BI and EP).
    Note: We have build only DEV-SolMan system as of now and we haven't done any configuration yet like either service desk or ChaRm.
    The question is:
    Do we need to have two seperate clients in DEV-Solman, one for all development systems and one for all quality systems? or Can we have a single client in DEV-Solman to handle all development and quality systems? What is the  SAP recommented approach?
    Thanks
    Sanjai

    Hi,
    you even don't need separate Solution Manager systems to monitor DEV / QA and Prod. You could use one SolMan client to monitor and administrate all systems / clients.
    Maybe it would be a good idea to create different Solution Landscapes, but this depends on your need.
    Separate clients are no good option, because CHARM can only activated in on client. Also if you plan to activate charm, you need a solution that contains all systems in your transport landscape (DEV, QAnad Prod).
    Kind Regards,
    Holger

  • Process chain (RSPC) modifcation in Quality and production system

    Hi,
    In our landscape quality and production system is set as non modifiable. But we want to modify the process chain (RSPC) in Quality and production system.
    As per the thread Need input: do process chain/InfoPackages changeable on PROD in your compa?  in RSA1 -> Transport connection we made   RSPC ( Process Chain) ,  RSPT (process chain starter) and RSPV (process variants) are changeable.
    With this setting we are able to create/ edit new process chain in Quality and Production system. But we canu2019t edit the transported Process chain. i.e. process chain transported from Dev to Quality system.
    We donu2019t want to open Business Information Warehouse: Customer Namespace (/BIC/ ) in Quality and production system (Se06). Please let me know is there any other settings needs to be.
    We are on BI 7.0
    Regards
    Preethish

    Hi ,
    In RSA1 -> Transport Connection --> Object Changeability
    Object has 3 state
    Not Changable
    Changable Original
    Every thing changable
    What is the difference b/w Changable Original and Every thing changable
    Thanks..
    Preethish

  • Difference between client Export/Import and a system refresh

    Hi Experts,
    I would like to know the diffrence between client Export/Import and System refresh.
    Actually i have done client export from our production system and imported it into our quality system, I have asked our functional consultants whether the production data is now available in Quality. They replied me saying whole data of production system is available in Quality system as off date i have copied the export.
    The size of the export was around 8GB, How can this have all the data of Production system which is around 600 GB.
    In this way what is the use of System refresh which is done by database level ( changing the cntrl file etc... ), As i am getting all the data by doing Client Export/Import.
    Thanks & Regards,
    Injamuri

    Hi,
    What is system refresh when and why it is done?
    The system refersh is nothing but the deletion of the client and replacing the data from other client. For example : you have clients 100, 200 and 300. Suppose when you want to refresh the client 100 you remove the client 100 and replace it with 200 0r 300 as per your reqiurement.
    Mostly the refresh of clients will be happen at the time of development stage.
    System Refresh is a simplified term to Client Copy. Client Copy means copying the production client on to the quality to test the real data. As recommend by SAP this need to carried out every 3 months.
    The process to carry out the same is as follows:
    1. Create a client on quality system using txn scc4
    2. Create a RFC between Production system and Quality System (need to create on quality system)
    3. Login to the newly created client using sap* and pass as a password
    4. Txn sccl to start the client copy.
    You can test the client copy by selecting the test run option. (test run will estimate the time taken for the activity).
    Anil

  • HT3986 I've had MS Office:mac 2011 on my imac for around 18 months now.  Outlook has just disappeared and when I find the file and open it it tells me that there is a problem and I may need to re-install it.  I've just done this using the installation dis

    I've had MS Office:mac 2011 on my imac for around 18 months now.  Outlook has just disappeared and when I find the file and open it it tells me that there is a problem and I may need to re-install it.  I've just done this using the installation disc which, then said the installation had been successful.
    Outlook is still not working.  Can anyone please advise me on what to do next.

    Remove MS Office 2011 completely (here are instructions) and reinstall it.
    It's not a simple or fast process but it is important to follow all of the steps in order to get all the files that Office scatters around. This will not affect your data files, only MS Office and its preferences.

  • I got an error message with updating my iTunes and now its saying I need to re-install iTunes. How do I do that

    When I was prompted there was an update on iTunes I did as usual and began installing the update. Something happened during that time and I got an error saying it didn't download correctly. Now when I go to open iTunes it gives me an error message and says I need to re-install the program.  I'm not sure how to do that.  I am also concerned that I will lose all of the things that I have backed up from my phones, purchases, apps, etc.  Can anyone please give me some insight on what to do?
    Thanks

    See... Unable to install or open > http://support.apple.com/kb/TS5376
    Also See this User Tip by turingtest2
    https://discussions.apple.com/docs/DOC-6562
    littlered1382 wrote:
      I am also concerned that I will lose all of the things that I have backed up from my phones, purchases, apps, etc.
    It has always been Prudent to Create and Maintain a Backup of anything you would not like to lose.

  • I have Windows 7 and for some reason I cannot install Adobe Type Manager onto my Computer. I need ATM to install the DIN font but am having no luck what so ever. I can see the DIN font in my Dropbox but it is showing up like this:-  ._DIN-bold, no file fi

    I have Windows 7 and for some reason I cannot install Adobe Type Manager onto my Computer. I need ATM to install the DIN font but am having no luck what so ever. I can see the DIN font in my Dropbox but it is showing up like this:-  ._DIN-bold, no file file extension. what am I doing wrong? is it Mac?

    (1)    Adobe Type Manager (ATM) is not compatible with any version of Windows beyond Windows XP (32-bit, only). Attempting to install ATM on any newer version of Windows may actually disable Window's capability of rendering Type 1 and OpenType CFF fonts, requiring a reinstallation of Windows.
    (2)    There is no need to use ATM to install any fonts under Windows.
    (3)    The file name ._DIN-bold is indicative of a MacOS font. These fonts cannot be installed on Windows systems.
              - Dov

  • I have Adobe Photoshop Elements 8 for Windows 7. I need to re-install it because my computer crashed. I saved the outer box, but I do not see a serial number and it is asking for it when I am trying to install the CD software. I went online, but the only

    I have Adobe Photoshop Elements 8 for Windows 7. I need to re-install it because my computer crashed. I saved the outer box, but I do not see a serial number and it is asking for it when I am trying to install the CD software. I went online, but the only serial number I see is when I registered the Photoshop Elements 2.0.

    The serial number will be on the disc case, not the outer box.  Find your serial number quickly

  • I too need to re install Bonjour, If I uninstall iTunes and re install i tunes, will I lose all my music?

    I accidently uninstalled Bonjour and need to re install it.
    If I do what is suggested and uninstall i tunes and reinstall it, will I lose all my songs etc that I already have on i tunes?

    No. They will be right where you left them after re-installing iTunes.
    Either way, you should be backing this content up anyways.
    B-rock

  • Please could somebody help me I have an iMac which came with Tiger 10.4.10 installed I have lost my disks and I need to re-install after a hard drive failure. Where can I find this? I will upgrade to Snow Leopard after but I cannot go straight to SL

    Please could somebody help me I have an iMac which came with Tiger 10.4.10 installed I have lost my disks and I need to re-install after a hard drive failure. Where can I find this? I will upgrade to Snow Leopard after but I cannot go straight to SL

    You can go strait to SL, all you need is a retail SL DVD available from Apple for $20. The US online store has them at:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard

  • Do I need to re-install the WHOLE suite or can I just install just Encore and Premier Pro?????

    I'm having a problem with my Encore and Premier Pro software. I have the Adobe Creative Suite Production Studio Premium CS5.1. Encore will not allow me to burn DVDS. I'm getting an 52102 error...won't allow it to finish writing...ALSO Premier Pro stops after capturing about 5 or 10 minutes of video and freezes...do I need to re-install my software??? and if I do... do I need to install the WHOLE suite or can I just install just Encore and Premier Pro????? I can burn and image file and it burns DVDs on my old Corel software so I know its not the burner or the DVDs I'm using..I am in the middle of a big project for kids at school really need to figure this out...not getting anywhere online. Can anyone help??? Has anyone had this problem?  Hope I'm posting this to right place. THANKS!

    I haven't had 52102 error, but seen it discussed. Here are a couple of links
    Error = Sense Code 52102
    Encore Hardware Error Sense Code 52102
    Burning the iso file to the dvd may not be the same process as burning directly from Encore to dvd, and so may not exhibit the same error, if any. See response 1 in the first link.
    As to the capture problem, look here
    Troubleshoot digital video capture and playback | Adobe Premiere Pro

  • Can't open iPhoto. I don't get an error message. When I launch the application it just hangs and the pointer just spins. I pressed option   apple and rebuilt the library and thumbnails and it's still not working. Do I need to re-install?

    If I do need to re-install how do I do this? I saved a back up of my iphoto library. Does this mean my photos are safe if I re-install. Help is much appreciated!

    If you're getting a hang like this at opening
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • I purchased and installed the Photoshop Photography Program last year but my computer crashed and now I need to re-install it again...can someone help?

    I purchased and installed the Photoshop Photography Program last year but my computer crashed and now I need to re-install it again...can someone help?

    Hi Sangeeta,
    For a fresh download on a new hard drive, it's best to start with the CC desktop app. Sign into adobe.com and download it here: creative.adobe.com/products/download/creative-cloud
    You can then launch the desktop, sign in and download PS & LR.

Maybe you are looking for