Is the system down?

I have no bars for about 45 minutes now. I cannot make phone calls or text messages. I do have wifi and it is working. What is causing me not able to make or receive calls??

Is it only you or are there others in your area also having problems? If it is only you, it could either be a phone problem or a SIM card problem. Try power cycling your phone and see if that helps. If not, you can go to a corporate store and have them replace your SIM and see if that corrects the problem.

Similar Messages

Is the system down? I can't log into Adobe CC or publish from Adobe Muse

I can't seem to log into CC or publish from adobe muse. Is the system down?
Annette

Apple discontinued it on June 30, 2012. Many of its services are now provided by iCloud; anything which connects specifically to MobileMe won't work.
(89929)

ICloud mail not working. I can send but cannot receive. Is the system down?

iCloud mail not working. I can send but cannot receive. Is the system down?

Same here. I can send mails from iCloud.com Webmail, but cannot receive.
A message that you sent could not be delivered to one or more of
its recipients. This is a permanent error. The following address
failed:
"[email protected]":
SMTP error from remote server after RCPT command:
host: mx1.icloud.com.akadns.net
5.1.1 unknown or illegal alias: [email protected]
On iOS 6 device I can't receive, neither send mails.
https://dl.dropbox.com/u/2234051/IMG_0001.PNG
However, if I change to @me.com, everything works fine.

CRT screen Twitches then Spazzes out before Shutting the system down

Do I have a power supply issue?
The CRT twitches a bit early on -- warning signs. Then it gets all "fuzzy" -- goes black & white with some fine horizontal lines, shrinks to about 2/3 size and suddenly Shuts Down the system.
Sometimes you can restart immediately but more often than not this just lead to another immediate Shut Down. After it's cooled off or something it starts back up, no problem.
Best guesses? Thanks in advance.

This old iMac rocks on newly signed up DSL...wish I could keep it longer but the electrical problem is disheartening!

Teatimer periodically starts paging like crazy(1500+pfs). It slows the system down very noticiably. How do i stop if?

It occurs several times a day and eventually stops. It often runs several minutes. I use the system task monitor to watch it. cpu usage is very small, in 3-5% range. I think the paging activity is overloading the paging subsytem for the rest of my tasks. If I stop teatimer, paging activity falls off markedly and everything else returns to normal response.

I have the same problem and I cannot find any way to turn off the internal bluetooth without killing all bluetooth including the dongle. If someone has a way to turn off the internal bluetooth I want to see it.
Thanks

Can't download pdf's from responses in forms central. Is the system down?

11 am 9/17/13 Can't download pdfs from Forms Central responses.
Problem with Forms Central?

This is Shannon from the FormsCentral engineering team. We are currently experiencing an outage and are doing everything we can to bring the system back up as soon as possible. I don't have an ETA at this moment but I can assure you that all of the appropriate people are working on the problem. I'll update this thread when I have more information. I apologize for the inconvenience that this is causing you.
Shannon

Until when does the System down for maintenance last??!!

I need to check the serial no. before Purchasing i pad and the system is still not available for more than 2 hours,, when can I access the web page to check it out?

I think it varies with different countries. At the top of your support page should be a yellow advice band through which you can check your local situation.
The latest maintenance in particular, has been a very long one; (5 hours in the UK).

I have a Imac and I have 8.1 iphoto and it will not open my library it started after i tried to close all the windows with no luck and had to force the system down by turning it off. everythig else came back up olay except Iphoto

My iphto will not open after I had to shut down my imac due to it not being able to close iphoto . It just says opeartion not able to open.

Try at the very least to update your iPhoto version to 8.1.2.

DVDRW is Mega-Slow and slows the system down

Hi,
I have:
4 x SATA2 disks on the ICH7 (three in RAID 0, one as single disk)
1 x IDE DVDRW on the Secondary IDE port, set as slave
When I burned a DVD yesterday the sound started to slow, I thought it was the application. But when I try to install a game DVD, the same thing happens .. the sound becomes 'jittery' and most noticeably the DVD takes AGES (FOREVER) to read.
I checked the BIOS, JMicron is set to IDE. the rest is set to defaults.
I checked Device Manager, the only active channel (Secondary IDE) which was set to 'PIO ONLY'. I changed this to 'DMA if available' but it's still in PIO mode. I beleive it should be in DMA??
Should I be using a different cable? I'm using the MSI supplied cable at present.
Any assistance would be much appreciated!
- FrobinRobin

You already have the latest stable release from MSI, but unfortunately lots of MSI customers have a problem with this BIOS version. There is a Beta release (1.6a) that BOSSKILLER posted earlier
http://www.ukshazam.com/download/bosskiller/7235v16A.rar
and it’s upgrading the Jmicron BIOS version too. You can choose between DOS or Windows flashing procedure. If you decide in Windows mode, download the latest BIOS version from MSI Live Update (Application that came with your Installation CD for keeping your MB up to date) and the file from the link above. After everything downloaded, go to Program files-Setup files replace only the bios file (extension .150) with the one from the link above(extension .16A), and run the MSIsetup file. Make sure that the Clear CMOS option is selected. For safety reason, make a recovery floppy and check for some setting in BIOS before flashing, so that you can configure the new version of the BIOS properly.
About the Widows drivers, Go to Control Panel – System- Hardware - Device Manager- “SCSI and RAID controllers” – right click on Jmicron- Uninstall.
Then: Control Panel- Add or Remove Programs – JRAID-uninstall.
Restart your computer, and when you’ll be prompt that “Found New Hardware”, click cancel on the “Found New Hardware wizard” and install the drivers that I’ve posted earlier (double click on the setup file).
Try with the drivers first, and if the installation is successful under DVD/CD Rom Devices you will notice that the drive is recognized as SCSI cD/Rom Device.
Good Luck

Creative cloud expired even after I replace credit card-- is the system down?

Anyone else finding it impossible to get their subscription "renewed" today?

If you contact Itunes support, they will probably tell you. There is no way we can help you as this is a users forum and we cannot possibly know what is the problem with your iTunes account.

Can a MacBook Pro battery spontaneously slow the system down?

I sent my 2010 MacBook Pro to a non-Apple technician to replace the screen. He wrote me back stating that it was done but had a problem with the battery. He said that the computer takes 10 minutes to boot up and is slow afterwards. He said when he unplugs the battery it speeds up to normal. Before I sent it to him it had no such problems. Can a perfectly-working battery spontaneously go bad like this?

Apple has financing arrangements you can use provided you have an adequate credit rating. You can apply when you make your purchasing arrangements online at the Apple Store. Or you can seek your own loan from a bank or charge the purchase on a credit card.
Also, see Apple Credit Page.

Ack! Spaces is not working and I can't get to the system prefs!

So i thought I'd give "Spaces" another try. I clicked the button to turn it all and everything went haywire.
2 dozen apps open, several with dozens of windows each.
And now I can't get to them. I can switch to them via dock or command-tab, but none of the windows are visible. This includes, unfortunately, the actual system preferences window, which would allow me to shut spaces off.
If I press F19, all the windows for everything become visible, but if I try to click on any of them, they all disappear.
I have tried navigating through the spaces using my arrow keys, and while I do get the spaces indicator window popping up showing me shifting from space to space, most of the applications fail to appear.
I know I could just reboot and that would probably let me back in control, but I don't want to just crash out the apps I have up with the multiple windows open!
Help!

Rebooting won't just 'crash' the apps. They are told to quit by Finder so that the restart will proceed in an orderly way.
If an application has a file open, it should pop up with a request to save option.
If it does, and finder won't let you click on the option you want, then you're in a bind anyway. If you can't bring up Activity Monitor and quit applications from there, then you will need to do a 'force quit' - Command + Option + Escape and choose to shut down the applications you can.
Although it's never recommended, you will probably need to just force the system down and reboot. Repair Permissions whenever you have to 'force' anything.

How to test system down in XI? Kindly help!

Hi Experts,
    I have a JMS -> XI ->SAP R/3 scenario.
    If the remote SAP R/3 is down then I have to trigger an alert.
    In the runtime workbench, i have configured the alert in Alert Configuration.
    In this I have given the alert category, receiver service, interface and namespace.
    How do I test the system down scenario without actually making the system down?
I have tried to test it via runtime workbench test tool and stopping the receiver communication channel. But SXMB_MONI shows the message successfully processed.
   Why the XI message is not in error?
   How do I actually test this scenario?
   Kindly help me!
Thanks
Gopal

> 1. The report RSARFCEX to restart this message from
> SM58.
Correct.
> 2. Executing report RSQIWKEX restarts errored msg in
> SXMB_MONI.
It restarts the error messge from the Queue in SM58. If the message is deleivered successfully from Sm58, the message in MONI gets updated. It does not restart the message from MONI.
> 3. Msgs are processed in tRFC queues only in IDOC
> scenarios.
Ths blog has answers ,
/people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
<i>Further in asynchronous communication, the calls can be executed either by tRFC (Transactional RFC) or qRFC (Queue RFC). In tRFC, RFC calls are stored in database along with corresponding data under a unique transaction id (TID). However in tRFC, LUW (Logical Unit of Work) are executed independently of each other and the sequence specified by sending application is not maintained. And this particular requirement leads to qRFC communication wherein all LUWs are processed in the same sequence as determined by sending application.</i>
Not only Idoc's used by other Interfaces as well.
Regards
Bhavesh

Best Practice: Migrating transports to Prod (system down etc.)

Hi all
This is more of a process and governance question as opposed to a ChaRM question.
We use ChaRM to migrate transports to Production systems. For example, we have a Minor BAU Release (every 2 weeks), a Minor Initiative Release (every 4 weeks) and a Major Release (every 3 months).
We realise that some of the major releases may require SAP to be taken offline. But what is SAP Best practice for ANY release into Production? i.e. for our Minor BAU Release we never shut down any Production systems, never stop batch jobs, never lock users etc.
What does SAP recommend when migrating transports to Prod?
Thanks
Shaun

Have you checked out the "Two Value Releases Per Year" whitepaper for SAP recommendations? Section 6 is applicable.
Lifetime Support by SAP &raquo; Two Value Releases per Year
The "real-world" answer is going to depend on how risk-adverse versus downtime adverse your company is. I think most companies would choose to keep the systems running except when SAP forces an outage or there is a real risk of data corruption (some data conversions and data loads, for example).
Specific to your minor BAU releases, it may be wise to make a process whereby anything that requires a production shutdown, stopped batch jobs, locked users, etc. needs to be in a different release type. But if you don't have the kind of control, your process will need to allow for these things to happen with those releases.
Also, with regards to stopping batch jobs in the real world, you always need to balance the desire to take full advantage of the available systems versus the pain of managing the variations. If your batch schedule is full, how are you going to make sure the critical jobs complete on time when you do need to take the system down? If it isn't full, why do you need that time? Can you make sure only non-critical batch jobs run during those times? Do you have a good method of implementing an alternate batch schedule when need be?

T61p restart when try to install the system.

Hello,
I have replaced motherboard on my lenovo T61p, old one was broken ( nivida chipset was burned). But right now after replacing motherboard I'm able to turn it on, i can go to bios setting, run mem test from cd. But when I'm trying to install system (Linux,win 7, win xp) it 's restarting. On windows 7 i can see the first progress bar under the DOS but when the bar is loaded and nice blue windows should appear it restarting. On win xp I'm able to format the hard drive, copy the files to HDD but when it restart and run from HDD, I can see the progress bar " installing device" 39 min left, and restart.
I have replaced Processor,memory, disconnected WIFI ,modem all unnecessary device but i still have this problem.
Maybe someone has this problem before ?

This is a longshot, but substitute a different harddrive if possible. If a drive is pulling to many amps, it will force the system down for lack of power. Any direct current motor, like in a harddrive could draw to much amps and cause this.
This is theory, I've not actually seen a bad drive do this, but it's worth a try.
If you don't have a drive to try, get a linux Live CD disc and boot from your optical drive without a harddrive. That should work , and if it seems stable, then you will need to find a known good trive to test.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Is the system down?

Similar Messages

Maybe you are looking for