Is their a Tiff viewer compatible with the US Patent Office Web Site?

Viewing image files of pre-1948 patents at the USP&TMO site requires a compatible Tiff file viewer. The one built into FF4 and previous versions does not work. Is there a plug-in for this? In the past AccelViewTiff worked. Quicktime doesn't work except on Safari.
Mac OS X 10.5.8

No luck. I installed ToyViewer and instructed Firefox to use ToyViewer to view Tiff files, but it does not appear to work on the Patent Office site. The PO apparently uses some weird compression scheme that most Tiff viewers cannot handle. It was designed for the Netscape browser. Perhaps some kind patent junky will build a plug-in for Firefox that displays the Patent images? : )

Similar Messages

Firefox does not work with the USPS self ship web site. Will not allow printing of postage labels.

Some months ago, user "junkbondman" asked this question somewhat poorly, and partly as a result got a non-responsive boilerplate answer by someone who did not read the question's key (if cryptic) point:
> Select a service type. THIS IS WHERE THE WEB SITE FAILS TO WORK PROPERLY
That's too bad, because 16 other users identified "HAVE SAME PROBLEM" - as had, no doubt, a large majority of the 677 viewers of the question. However, maybe to get a better answer we need to start with a better definition of the problem.
The way that the USPS site <cns.usps.com> works to print a label is that addresses (return and forward) are defined, the package weight and value are specified, and then a shipping mode is selected before paying and printing the label. The shipping mode is selected in a section titled "Select a service type", via an embedded table using a vertical scroll-bar that Firefox cannot handle. [Firefox is not alone in that. For example, Safari under iOS cannot scroll the embedded table, but USPS provides a mobile app which mitigates that problem by presenting the table differently.]
Now, it should be stipulated that the table is the worst element in a bad page that does not begin to pass W3 validation [71 errors, 19 warnings - looks like government work]. However, other browsers (like Google Chrome) handle that table with apparent ease. The question is whether Firefox should be able to do so - and, if so, how? As of Fx 33.0, this still does not work.
NOTES:
(1) Unfortunately, to examine this problem requires setting up a USPS account in order to see the shipping page. Setting up the account is easy, but it is a small extra burden to examining the problem.
(2) The problem has been reported to USPS, but has elicited no sign of intelligent life.

''I get the "pointer" mouse cursor when mousing over the blue bar, and I can click on it and scroll the contents as with any other scroll bar, but the bar doesn't move up and down in sync with the content being scrolled: it just stays put. If I do not slide straight down, the blue bar may twitch a pixel left or right.''
Great description! - sorry if you implied that earlier and I misunderstood, but I think that description adds crucial details:
* must hover over the ''blue'' part of the bar (representing the visible part of the table) and
* get the "selector" cursor (the pointing finger), then
* hold that click while scrolling (inside or outside of the table doesn't matter, as long as that click is held) to the needed table row, then
* release the click, and the table stays in place to allow a selection.
Most pages with an embedded scrollable input form (like the box I'm typing in on this page) do not change to the selector cursor when hovering over ''any'' part of the scroll bar, either ''blue'' (representing the visible part of the input form) or ''white'' (the invisible part of the input form). And it is common to click in the ''white'' part of the bar as a way of saying "show what is not visible". You can't do that with these USPS input forms, which behave differently.
Now, even with this method, that remains a very unintuitive (because the scroll bar does not reflect the position, and because the actual ''selections'' never get the "selector" cursor) and awkward way to work, so there is no visual feedback on either part of the operation.
And, I must try to understand why some browsers treat this differently. For example with Chrome (like Firefox), the cursor changes to "selector" in the blue part of the scroll bar, but not in the white part, but with Chrome (unlike Firefox):
- a ''click'' in the white ("invisible") part of the scroll bar or
- a ''drag'' on the blue ("visible") part of the scroll bar
causes movement in the required direction - altogether more intuitive behavior.
Bottom line: At least there is a way to make this work with Firefox, but it is awkward, to say the least. It will require a lot more thought to think about:
* how and why some browsers handle these non-standard input forms with such intuitive behavior (that is, behavior that is familiar in more standard input forms),
* whether the fact that Firefox is less accommodating in that regard is a reportable bug, or whether Firefox should not have to worry about sites (like usps.com) that can't be bothered to comply with standards.
What do you think about those questions?

Firefox does not work with the USPS self ship web site. Will not allow printing of postage lables. Please fix.

after I input all information, the select a service section does not operate properly and I cannot print a shipping lable.
Select a service type. THIS IS WHERE THE WEB SITE FAILS TO WORK PROPERLY
Choose a Service Type
Package Type Scheduled Delivery Shipping Price
Enter package details to view service options.

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

Unable to refresh the schema of FIM MA.Getting an error in Event viewer ""the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1"

Hi,
We have installed FIM MA with an account that have all the sufficient rights.It got created successfully and worked for Full Import and Full Sync. But, due to some version incompatabilities, we have installed a patch.PFB link for the patch.
http://support.microsoft.com/en-us/kb/2969673/en-us
Now, we are trying to refresh the schema of FIM MA. While doing that we are facing an error "Failed to connect to database". The user account with which we are connecting has read and write permissions on DB.In the event viewer some errors are
logged like "the current version of database is not compatible with the one expected by Forefront Identity Manager service. The current version of database is : 1116. The expected version is :1122" with event ID 3. PFB images for more detailed
view.
Please advice how to fix the issue.
Thanks
Prasanthi.

Hello,
seems to me that you maybe only updated the syncengine but not portal/webservice.
I had that error once after an recovery from scratch and forgot one of the hotfixes to apply to all services.
-Peter
Peter Stapf - ExpertCircle GmbH - My blog:
JustIDM.wordpress.com

The FTP function in Dreamweaver CS5 has suddenly stopped working. My ISP just had to upgrade their FTP servers and they said it was no longer compatible with the FTP in Dreamweaver CS5! Help!!

Is there any update to Dreamweaver CS5 that will allow the FTP function to be compatible with the new FTP server protocol? Please help. Will I need to upgrade to CS6?

Ask in the DW forum and be much more specific about the requirements for your FTP connection like its ports, TLS settings and so on.
Mylenium

I need version 3. 6.18 back as version 4 is not compatible with the electronic filing system of the U. S. Bankrutpcy Court.

I'm copying the message I received from the U. S. Bankruptcy Court:
ECF users are advised NOT TO UPGRADE to version 4.x or 5.x of the Firefox browser.
The Firefox browser versions 4.x and 5.x are not fully compatible with the court's ECF system. Several issues involving electronic filing have been reported. Furthermore, the "View Labels" button from the Creditor Mailing Matrix is not functional when using the upgrade. The recommended version of Firefox for use with ECF is 3.6.18, and the recommended version of Internet Explorer is either 7.x or 8.x.
If you have any questions, please contact the ECF Help Desk at 503-326-1510, 541-431-4005 or 866-777-0442.
I need to get version 3.6.18 back.

To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles
3.6.17 is the latest release version, 3.6.18 is due out on June 21st.

Content Tab: None of the fact tables are compatible with the query request

Hi All,
**One thing I am not clear yet of all my years with OBIEE is working with the content tab in BMM.**
I have made a rpd the joins in physical layer as shown below:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056545119428530
And the BMM layer as:
https://picasaweb.google.com/114804305606242416264/OBIEEError#5663056519553812930
Error I am getting when i run a request from the 3 columns from the selected 3 tables is:
Dim - Comment Code Details
Fact - Complaint
Dim - Service Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 14020] None of the fact tables are compatible with the query request Sr Num:[DAggr(Fact - Complaint.Sr Num by [ Dim - Service Details.Sr Cat Type Cd, Dim - Comment Code Details.Cmtcode name] )]. (HY000).
I get no error for consistency.. I read everywhere and I know i need to set the appropriate aggregation levels in the various dims and facts LTS properties to help OBIEE understanding our model, but how to do that.. how do i decide... how should I approach, what should be the aggregation level, what details.
When i click More button i see different options: Copy, Copy From, Get Levels, Check Level, what do these mean.
Aggregation Content, group by - Logical Level or Column which one should i choose and how should I decide.
Can anyone explain the Content Tab in details and from scratch with some example and why we get these errors.... I know many people who are well versed with many other things related to RPD but this. A little efforts of explaining from you guys will really be appreciated.
Thanks in advance,
Dev

Hi Deepak,
Option 1:
My tables in physical layer are joined as below:
D1--> F1 <--D2--> F2 <--D3
Same way i model it in BMM
D1--> F1 <-- D2--> F2 <--D3
Here D1 is non Conformed Dimension for F2 and D3 is non Conformed dim for F1. Later create Dimensional hierarchies, I tried setting up the content levels
I go Sources>content tab of Fact F1 I set
Dimensions----------- Logical level
D1---------------------- D1 Detail
D2---------------------- D2 Detail
D3---------------------- D3 Total
then, I go Sources>content tab of Fact F2 I set
Dimensions----------- Logical level
D1---------------------- D1 Total
D2---------------------- D2 Detail
D3---------------------- D3 Detail
Then, I also go in all the dimensions and set their content levels to Details, but it still gives me errors not sure where I am going wrong in setting the content levels.
I need to know whether the way I have modeled it in BMM is right,
Option 2:
I can combine the two facts in a single Logical Fact or the above design should also work.
(F1&F2)<--D1, D2 , D3 joined separately using complex logical joins.
what will be the content tab details?
Thanks,
Dev

I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

Help!!! (CrystalDecisions.Web.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer)

Post Author: mrmc
CA Forum: General
Hi all,
Recently, I got problem on using cystal report on asp.net web. the error msg is:
Parser Error Message: The base class includes the field 'viewer', but its type (CrystalDecisions.Web.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer).
in the code:
<%@ Register TagPrefix="ce" Namespace="CrystalDecisions.Enterprise.WebControls" Assembly="CrystalDecisions.Enterprise.Web, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" %>
<CR:CrystalReportViewer id="viewer" runat="server" AutoDataBind="true" HasCrystalLogo="False" Width="350px" Height="50px" HasToggleGroupTreeButton="False" DisplayGroupTree="False" HasGotoPageButton="False" HasRefreshButton="True" DisplayToolbar="False"></CR:CrystalReportViewer>
In web.config
<add assembly="CrystalDecisions.Web, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=1234567890"/>
the server contains crytal report 9 (come from .net studio) and crytal report 11 (installed standalone).
I googled this problem, it seems a lot of people got this problem but no solution...
could anyone help me? Thanks!

Post Author: david.wilkes
CA Forum: General
You might try Removing the Reference and re-adding the reference. That seemed to get me pass this error, but I ran into another error that I have not figured out yet.

Provider is not compatible with the client

Hi,
I'm new to this forum so I don't know if this prob was already posted.
It might be something that i misunderstood.
My application VB.NET is connecting to Oracle 10g database.
Using client from the ODAC 10.2.0.2.21 installation file.
DB version is 10.2.0.1.0
Even before connection is open application throws an exception:
The provider is not compatible with the version of Oracle client at Oracle.DataAccess.Client.OracleInit.Initialize()
Any ideas?
Thanks for help ;O)
Nice day to everybody.
Renata Belakova

Thanks
1, I'm developing an application on Win 2003 Server with Ora10g DB 10.2.0.1.0
2, I developed an application in VS.NET 2005, VB.NET
3, Application works OK on develop. PC
4, my PC name, IP and DB name are the same as customers
5, i published application and went to install it on customers PC
I was thinking about the same environment on developing and customer PCs.
then i went to customer to try application on their LAN
1, They have DB server with the same version of DB and the same name of DB and the same name of server as i got
2, firstly I've installed ora client on customer computer not server
I've used ODTwithODAC1020221.exe file and installed client part
3, set up listener on clients comp
4, installed .net application on this client comp
5, run and got exception i wrote in previous message
Im really not an Oracle professional. I'm a .NET developer but fist time in my life developing application under Oracle DB (mostly was using Microsoft SQL ...)
So I don't know if these steps were OK .... but it's what i've read.
Thanx ...

I have Norton 360 and it's not compatible with the upgrade to Firefox 4? How do I get Norton activated now for the internet?

I received a notice that I should upgrade to the Firefox 4. After I did the upgrade I then got a notice that Norton wasn't compatible with the the upgrade. How do I go about getting my Norton Security to work with this upgrade. So right now I have nothing in which is protecting my computer while surfing. Nothing against your product BUT I want what I already had/have to be the one protecting my computer. So what needs to be done so I can have my existing computer security to work with this upgrade. Otherwise I'll go back to the previous version which did work with Norton.

Symantec need to update their Firefox add-ons so that they are compatible with Firefox 4. They have indicated that for Norton 360 they plan to release an update to Norton 360 to support Firefox 4 in early May - http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20100720113635EN&ln=en_US
I do not know about the time scale for updates for other Norton products. Pending the update by Symantec, if you want to use the Norton add-ons you will need to downgrade to Firefox 3.6.
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

I am syncing my ipod but it comes up with a error saying itunes could not backup the ipod because the backup was corrupt or not compatible with the ipod, what do i do?

i am syncing my ipod but it comes up with a error saying itunes could not backup the ipod because the backup was corrupt or not compatible with the ipod, what do i do?

As I said the iTunes program on the computer. You open iTunes on the computer and go to the View menue in the upper rightand then click on preferences. Go to Devices and delete the backup.

Looking for a sports video camera that is compatible with the mac

Looking for a video camera that can record sports well and is also compatible with the mac. I've been using iMovie to edit videos for a highlight reel of my highschool soccer games that I coach.

I like Sony HD MiniDV (HDV) Handycam Camcorder - HDRFX1000, but I have also used several older Sony (DCR-TRV17 and DCR-TRV70) and Canon (VIXIA HV20, VIXIA HV30, and VIXIA HV40) tape-based Firewire-equipped camcorders with good results.
I prefer tape-based Firewire-equipped cameras because of their IEEE 1394 transfer speed, compatibility with iMovie HD, and ability to serve as the source recording directly into iMovie when desired. If none of these characteristics is important to you, other Mac-compatible camcorders with suitable zoom ranges and lens speeds for the light levels you encounter should also do nicely for recording at your games.
You do not say which iMovie version you are using, but you can find about known compatible camcorders by searching for the info in a search like this one.
Message was edited by: EZ Jim
Mac OSX 10.9

Essbase answers - None of the fact tables are compatible with the query request "member"

Hi,
I have modelled an Essbase database into the repository.
If I pull the measure, period and year dimension in and filter on the year (member) and display the year (member) along with the period (alias) and measure it errors with =>
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14020] None of the fact tables are compatible with the query request Fiscal Year.Fiscal Year Code. (HY000)
However, all other things being equal if I change the year displayed to the alias then it works.
Anyone tell me why??
Is there a limitation that Essbase brings through that you cannot view what you filter on?
thanks,
Robert.

Hi
i have done the content level setting in each of the table, D1,F1 and F2(LTS), now i am getting the following error..
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table Gl Sets Of Books) does not contain mapping for [Code Combinations.Code Combinations.Affiliate, GL Balances.GL Balances.Currency Code, GL Balances.GL Balances.PTD_Balance, Gl Sets Of Books.Gl Sets Of Books .SoB Name]. (HY000)
Gl Balances : D1
Code Commbination: F1
Gl Sets Of Books : F2
I have checked the joins in physical and BMM layer..all are fine..

None of the fact sources for [column] are compatible with the detail filter

Hi Experts,
I am using obiee 11.1.1.7.
Getting below error when i add a filter of non conformed dimension column.
Below is the error
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 14023] None of the fact sources for [column] are compatible with the detail filter
Please help in solving an issue.
Regards,
NN

Hi NN
You need to follow steps in below link to model your BMM layer for the report to work with non confirmed dimensions.
http://obibb.wordpress.com/2010/05/31/multiple-fact-reporting-on-non-conforming-dimensions/
Once you have followed these steps you can use the non confirmed dimension in the reports.When you see the logs to see the query generated by obiee,it generated 2 queries 1 with confirmed dimension and other with non conformed dimension.When you filter using non confirmed dimension you will now not notice any error but the results will not be filtering out because the filter will be applied only in 1 query which is valid
Now for this to work what you can do is ,instead of using the filter drag the column you like to filter as a prompt in your view.default it to the value you need using the case statement and hide it.This is one of the work around.
There may be many other work arounds for this but you need to understand that for you requirment to work you need to tweek OBIEE to generate 1 query instead of 2 queries.

Is their a Tiff viewer compatible with the US Patent Office Web Site?

Similar Messages

Maybe you are looking for